Search Results (633)

The synergistic development of low-permeability reservoirs such as deep coalbed methane (CBM) and tight gas has emerged as a key technology to reduce development costs, enhance single-well productivity, and improve gas recovery. However, due to fundamental differences between coal seams and tight sandstones in their pore structure, permeability, water saturation, and pressure sensitivity, significant variations exist in their flow capacities and fluid production behaviors. To address the challenges of production allocation and main reservoir identification in the co-development of CBM and tight gas within deep gas-bearing basins, this study employs the transient multiphase flow simulation software OLGA to construct a representative dual-gas co-production well model. The regulatory mechanisms of the gas–liquid distribution, deliquification efficiency, and interlayer interference under two typical vertical stacking relationships—“coal over sand” and “sand over coal”—are systematically analyzed with respect to different tubing setting depths. A high-precision dynamic production allocation method is proposed, which couples the wellbore structure with real-time monitoring parameters. The results demonstrate that positioning the tubing near the bottom of both reservoirs significantly enhances the deliquification efficiency and bottomhole pressure differential, reduces the liquid holdup in the wellbore, and improves the synergistic productivity of the dual-reservoirs, achieving optimal drainage and production performance. Building upon this, a physically constrained model integrating real-time monitoring data—such as the gas and liquid production from tubing and casing, wellhead pressures, and other parameters—is established. Specifically, the model is built upon fundamental physical constraints, including mass conservation and the pressure equilibrium, to logically model the flow paths and phase distribution behaviors of the gas–liquid two-phase flow. This enables the accurate derivation of the respective contributions of each reservoir interval and dynamic production allocation without the need for downhole logging. Validation results show that the proposed method reliably reconstructs reservoir contribution rates under various operational conditions and wellbore configurations. Through a comparison of calculated and simulated results, the maximum relative error occurs during abrupt changes in the production capacity, approximately 6.37%, while for most time periods, the error remains within 1%, with an average error of 0.49% throughout the process. These results substantially improve the timeliness and accuracy of the reservoir identification. This study offers a novel approach for the co-optimization of complex multi-reservoir gas fields, enriching the theoretical framework of dual-gas co-production and providing technically adaptive solutions and engineering guidance for multilayer unconventional gas exploitation. Full article

Downhole kick is one of the most severe safety hazards in deep and ultra-deep well drilling operations. Traditional monitoring methods, which rely on surface flow rate and fluid level changes, are limited by their delayed response and insufficient sensitivity, making them inadequate for early warning. This study proposes a real-time monitoring technique for gas content in drilling fluid based on the attenuation principle of Ba-133 γ-rays. By integrating laboratory static/dynamic experiments and Geant4-11.2 Monte Carlo simulations, the influence mechanism of gas–liquid two-phase media on γ-ray transmission characteristics is systematically elucidated. Firstly, through a comparative analysis of radioactive source parameters such as Am-241 and Cs-137, Ba-133 (main peak at 356 keV, half-life of 10.6 years) is identified as the optimal downhole nuclear measurement source based on a comparative analysis of penetration capability, detection efficiency, and regulatory compliance. Compared to alternative sources, Ba-133 provides an optimal energy range for detecting drilling fluid density variations, while also meeting exemption activity limits (1 × 10⁶ Bq) for field deployment. Subsequently, an experimental setup with drilling fluids of varying densities (1.2–1.8 g/cm³) is constructed to quantify the inverse square attenuation relationship between source-to-detector distance and counting rate, and to acquire counting data over the full gas content range (0–100%). The Monte Carlo simulation results exhibit a mean relative error of 5.01% compared to the experimental data, validating the physical correctness of the model. On this basis, a nonlinear inversion model coupling a first-order density term with a cubic gas content term is proposed, achieving a mean absolute percentage error of 2.3% across the full range and R² = 0.999. Geant4-based simulation validation demonstrates that this technique can achieve a measurement accuracy of ±2.5% for gas content within the range of 0–100% (at a 95% confidence interval). The anticipated field accuracy of ±5% is estimated by accounting for additional uncertainties due to temperature effects, vibration, and mud composition variations under downhole conditions, significantly outperforming current surface monitoring methods. This enables the high-frequency, high-precision early detection of kick events during the shut-in period. The present study provides both theoretical and technical support for the engineering application of nuclear measurement techniques in well control safety. Full article

Altitude Test Facility (ATF) compressor systems are widely used in aero-engine tests. These systems achieve the control of gas pressure and transport through complex operation processes. With advancements in the aviation industry, there is a growing demand for higher performance, greater safety, and more energy efficiency in digital ATF systems. Hybrid modeling is a technology that combines many methods and can meet these requirements. The Modular Dynamic System Greitzer (MDSG) compressor model, including mechanistic and data-driven modeling approaches, is combined with a neural network to obtain a BPNN-MDSG hybrid modeling method for the digital turbine system. The digital simulation is linked with the physical sensors of the ATF system to realize real-time simulation and monitoring. The steady and dynamic conditions of the actual system are simulated in virtual space. Compared with the actual results, the average error of steady mass flow is less than 3%, and the error of pressure is less than 1%. The average error of dynamic mass flow is less than 5%, and the error of pressure is less than 3%. The simulation and characteristic predictions are carried out in BPNN-MDSG virtual space. The anti-surge characteristics of the ATF system under start-up conditions are obtained. The full-condition anti-surge operation map of the system is obtained, which provides guidance for the actual operation of the ATF system. Full article

This study designed and validated a dual-component beat-frequency quartz-enhanced photoacoustic spectroscopy (BF-QEPAS) gas detection system utilizing time-division multiplexing (TDM). By applying TDM to drive distributed feedback lasers, the system achieved the simultaneous detection of acetylene and methane. Its key innovation lies in exploiting the transient response of the quartz tuning fork (QTF) to acquire gas concentrations while concurrently capturing the QTF resonant frequency and quality factor in real-time. Owing to the short beat period and rapid system response, this approach significantly reduces time-delay constraints in time-division measurements, eliminating the need for periodic calibration inherent in conventional methods and preventing detection interruptions. The experimental results demonstrate minimum detection limits of 5.69 ppm for methane and 0.60 ppm for acetylene. Both gases exhibited excellent linear responses over the concentration range of 200 ppm to 4000 ppm, with the R² value for methane being 0.996 and for acetylene being 0.997. The system presents a viable solution for the real-time, calibration-free monitoring of dissolved gases in transformer oil. Full article

Chronic Coronary Syndrome (CCS) significantly impacts quality of life and increases the risk of adverse cardiovascular events, remaining the leading cause of mortality worldwide. The use of sensor technology in medicine is emerging as a promising approach to enhance the management and monitoring of patients across a wide range of diseases. Recent advancements in engineering and nanotechnology have enabled the development of ultra-small devices capable of collecting data on critical physiological parameters. Several sensors integrated in wearable and implantable devices, instruments for exhaled gas analysis, smart stents and tools capable of real time biochemical analysis have been developed, and some of them have demonstrated to be effective in CCS management. Their application in CCS could provide valuable insights into disease progression, ischemic events, and patient responses to therapy. Moreover, sensor technologies can support the personalization of treatment plans, enable early detection of disease exacerbations, and facilitate prompt interventions, potentially reducing the need for frequent hospital visits and unnecessary invasive diagnostic procedures such as coronary angiography. This review explores sensor integration in CCS care, highlighting technological advances, clinical potential, and implementation challenges. Full article

The transportation sector significantly contributes to greenhouse gas (GHG) emissions and remains a key research focus on emission quantification and mitigation. Although numerous models exist for estimating vehicle-based emissions, most lack accuracy at regional scales, particularly in remote or underdeveloped areas, including backcountry national parks and mountainous regions lacking basic infrastructure. This study addresses that gap by developing and applying a terrain-adjusted, segment-based methodology to estimate GHG emissions from tourist vehicles in Altai Tavan Bogd National Park, one of Mongolia’s most remote protected areas. The proposed method uses Tier 1 IPCC emission factors but incorporates field-segmented route analysis, vehicle categorization, and terrain-based fuel adjustments to achieve a spatially disaggregated Tier 1 approach. Results show that carbon dioxide (CO₂) emissions increased from 118.7 tons in 2018 to 2239 tons in 2024. Tourist vehicle entries increased from 712 in 2018 to 13,192 in 2024, with 99.1% of entries occurring between May and October. Over the same period, cumulative methane (CH₄) and nitrous oxide (N₂O) emissions were estimated at 300.9 kg and 45.75 kg, respectively. This modular approach is especially suitable for high-altitude, infrastructure-limited regions where real-time emissions monitoring is not feasible. By integrating localized travel patterns with global frameworks such as the IPCC 2006 Guidelines, this model enables more precise and context-sensitive GHG estimates from vehicles in national parks and similar environments. Full article

This article presents the development, integration, and experimental validation of a modular microgrid for sustainable hydrogen production, addressing global electricity demand and environmental challenges. The system was designed for initial validation in a thermoelectric power plant environment, with scalability to other applications. Centered on a six-compartment skid, it integrates photovoltaic generation, battery storage, and a liquefied petroleum gas generator to emulate typical cogeneration conditions, together with a high-purity proton exchange membrane electrolyzer. A supervisory control module ensures real-time monitoring and energy flow management, following international safety standards. The study also explores the incorporation of blockchain technology to certify the renewable origin of hydrogen, enhancing traceability and transparency in the green hydrogen market. The experimental results confirm the system’s technical feasibility, demonstrating stable hydrogen production, efficient energy management, and islanded-mode operation with preserved grid stability. These findings highlight the strategic role of hydrogen as an energy vector in the transition to a cleaner energy matrix and support the proposed architecture as a replicable model for industrial facilities seeking to combine hydrogen production with advanced microgrid technologies. Future work will address large-scale validation and performance optimization, including advanced energy management algorithms to ensure economic viability and sustainability in diverse industrial contexts. Full article

Hydrogen sulfide (H₂S), once regarded solely as a highly toxic gas, is now recognized as a crucial signaling molecule in plants, bacteria, and mammals. In humans, H₂S signaling plays a role in numerous physiological and pathological processes, including vasodilation, neuromodulation, and cytoprotection. To exploit its biological functions and therapeutic potential, a wide range of H₂S-releasing compounds, known as H₂S donors, have been developed. These donors are designed to release H₂S under physiological conditions in a controlled manner. Among them, self-reporting H₂S donors are seen as a particularly innovative class, combining therapeutic delivery with real-time fluorescence-based detection. This dual functionality enables spatiotemporal monitoring of H₂S release in biological environments, eliminating the need for additional sensors or probes that could disrupt cellular homeostasis. This review summarizes recent advancements in self-reporting H₂S donor systems, organizing them based on their activation triggers, such as specific bioanalytes, enzymes, or external stimuli like light. The discussion covers their design strategies, performance in biological applications, and therapeutic potential. Key challenges are also highlighted, including the need for precise control of H₂S release kinetics, accurate signal quantification, and improved biocompatibility. With continued refinement, self-reporting H₂S donors offer great promise for creating multifunctional platforms that seamlessly integrate diagnostic imaging with therapeutic H₂S delivery. Full article

Ammonia, as a toxic and corrosive gas, is widely present in industrial emissions, agricultural activities, and disease biomarkers. Detecting ammonia is of vital importance to environmental safety and human health. Sensors based on MXene have become an effective means for detecting ammonia gas due to their unique hierarchical structure, adjustable surface chemical properties, and excellent electrical conductivity. This study reviews the latest progress in the use of MXene and its composites for the low-temperature detection of ammonia gas. The strategies for designing MXene composites, including heterojunction engineering, surface functionalization, and active sites, are introduced, and their roles in improving sensing performance are clarified. These methods have significantly improved the ability to detect ammonia, offering high selectivity, rapid responses, and ultra-low detection limits within the low-temperature range. Successful applications in fields such as industrial safety, food quality monitoring, medical diagnosis, and agricultural management have demonstrated the multi-functionality of this technology in complex scenarios. The challenges related to the material’s oxidation resistance, humidity interference, and cross-sensitivity are also discussed. This study aims to briefly describe the reasonable design based on MXene sensors, aiming to achieve real-time and energy-saving environmental and health monitoring networks in the future. Full article

The visual colorimetric sensing of total volatile basic nitrogen (TVB-N) allows for convenient dynamic monitoring of animal-derived food freshness to ensure food safety. The agarose hydrogel loaded with the natural dye juglone (Jug@AG) prepared in this study exhibits visible multicolor changes from yellow to grayish-yellow and then to brownish with increasing TVB-N gas concentration, achieving sensitive detection of TVB-N gas at concentrations as low as 0.05 mg/dm³ within 8 min. The minimum observable amounts of TVB-N in spiked pork and fish samples are 8.43 mg/100 g and 8.27 mg/100 g, respectively, indicating that the Jug@AG hydrogel possesses sensitive colorimetric sensing capability in practical applications. The Jug@AG hydrogel also shows significant changes in color difference value (∆C) under both room temperature (25 °C) and cold storage (4 °C) conditions, with the changing trends of ∆C showing consistency with the measured TVB-N and total viable counts (TVC) during the transition of pork and fish samples from freshness to early spoilage and then to spoilage. The results indicate that the Jug@AG hydrogel can be used as a colorimetric sensor to achieve real-time dynamic freshness monitoring of animal-derived food. Full article

This study aims to provide a comprehensive overview of the application of artificial intelligence (AI) methods to solve real-world problems in the oil and gas sector. The methodology involved a two-step process for analyzing AI applications. In the first step, an initial exploration of scientific articles in the Scopus database was conducted using keywords related to AI and computational intelligence, resulting in a total of 11,296 articles. The bibliometric analysis conducted using VOS Viewer version 1.6.15 software revealed an average annual growth of approximately 15% in the number of publications related to AI in the sector between 2015 and 2024, indicating the growing importance of this technology. In the second step, the research focused on the OnePetro database, widely used by the oil industry, selecting articles with terms associated with production and drilling, such as “production system”, “hydrate formation”, “machine learning”, “real-time”, and “neural network”. The results highlight the transformative impact of AI on production operations, with key applications including optimizing operations through real-time data analysis, predictive maintenance to anticipate failures, advanced reservoir management through improved modeling, image and video analysis for continuous equipment monitoring, and enhanced safety through immediate risk detection. The bibliometric analysis identified a significant concentration of publications at Society of Petroleum Engineers (SPE) events, which accounted for approximately 40% of the selected articles. Overall, the integration of AI into production operations has driven significant improvements in efficiency and safety, and its continued evolution is expected to advance industry practices further and address emerging challenges. Full article

Mine ventilation systems are critical for ensuring operational safety, yet air leakage remains a pervasive challenge, leading to energy inefficiency and heightened safety risks. Traditional tracer gas methods, while effective in simple networks, exhibit significant errors in complex multi-entry systems due to static empirical parameters and environmental interference. This study proposes an integrated methodology that combines multi-path airflow analysis with dynamic longitudinal dispersion coefficient correction to enhance the accuracy of air leakage detection. Utilizing sulfur hexafluoride (SF6) as the tracer gas, a phased release protocol with temporal isolation was implemented across five strategic points in a coal mine ventilation network. High-precision detectors (Bruel & Kiaer 1302) and the MIVENA system enabled synchronized data acquisition and 3D network modeling. Theoretical models were dynamically calibrated using field-measured airflow velocities and dispersion coefficients. The results revealed three deviation patterns between simulated and measured tracer peaks: Class A deviation showed 98.5% alignment in single-path scenarios, Class B deviation highlighted localized velocity anomalies from Venturi effects, and Class C deviation identified recirculation vortices due to abrupt cross-sectional changes. Simulation accuracy improved from 70% to over 95% after introducing wind speed and dispersion adjustment coefficients, resolving concealed leakage pathways between critical nodes and key nodes. The study demonstrates that the dynamic correction of dispersion coefficients and multi-path decomposition effectively mitigates errors caused by turbulence and geometric irregularities. This approach provides a robust framework for optimizing ventilation systems, reducing invalid airflow losses, and advancing intelligent ventilation management through real-time monitoring integration. Full article

The characterization of airborne submicrometric composite structures’ debris is a challenge in the field of environmental monitoring and control. The work presented here aims to develop a new quantitative method to measure elemental mass concentrations via particle sampling and Transmission Electron Microscopy—Energy-Dispersive X-ray Spectroscopy (TEM-EDS). The principle is to collect airborne particles on a porous TEM grid, then add a certain mass of reference particles, and compare the relative mass percentages of elements from reference and sample particles via EDS. Diverse pairs of airborne particles (RbCl, CsCl, NaCl, SrCl₂, Ga(NO₃)₃, braking particles) were deposited on one TEM grid, and the experimental elemental mass ratios were measured by EDS and compared with the theoretical values. Results show that the quantitative and homogeneous collection of reference particles, such as RbCl, on the TEM grid could be suitable. For all the tested conditions, the absolute deviations between the theoretical elemental mass ratios and the experimental ratios remain lower than 8%. Thus, the mass concentration of Fe from the braking aerosol is calculated as 107 µg/m³. Compared to the cumbersome real-time instrument, this new method for mass characterization appears to be convenient, and requires a short time of aerosol sampling at the workplace. This approach ensures safety and practicability when assessing, e.g., the exposure risk of hazardous materials. Full article

As an advanced real-time monitoring technique, optic fiber downhole sensing has been widely applied in monitoring fracture propagation during hydraulic fracturing. However, existing fracture shape inversion methods face two main challenges: firstly, traditional methods struggle to accurately capture the dynamic changes in strain rate and fracture shape during the propagation process, and secondly, they are computationally expensive. To address these issues, this study proposes a full-time-step fitting inversion method. By precisely fitting all time steps of fracture propagation, this method effectively overcomes the shape deviation problems often encountered in traditional methods and significantly reduces computational costs. Compared to conventional single-time-step inversion methods, our approach not only provides a more accurate representation of the spatiotemporal dynamics of fracture propagation but also avoids the risk of significant errors in fracture shape reconstruction. Therefore, the proposed inversion method holds substantial practical value and significance in fracture monitoring and sensing for oil and gas fields. Full article

The present study originally addresses the data reduction problem in industrial settings through the lens of instance selection procedures, aiming to enhance the quality of data-driven models by preserving only the most relevant characteristics from the available datasets. Unlike traditional approaches, the proposed Instance Selection Library (ISLib) is specifically designed to handle the unique challenges of industrial datasets, such as operational variability, sensor inaccuracies, and the need for interpretable results. ISLib introduces a novel methodology tailored for regression tasks, an underexplored area in instance selection research. Additionally, the paper explores the statistical characteristics of the reduced datasets, the impact of training data size and distribution, and the performance of models across various fault and anomaly types. ISLib was validated using three datasets, including the Tennessee Eastman Process and two real-world oil and gas applications. The findings emphasize, for the first time, the significance of employing a well-designed instance selection approach to achieve successful outcomes in practical industrial applications, particularly in regression machine learning problems. By bridging literature gaps and offering a user-friendly tool, this work advances data-driven process monitoring in industrial environments. Full article