Search Results (2,052)

Accurate absolute radiometric calibration is critical for ensuring the data quality of spaceborne Synthetic Aperture Radar (SAR) systems and supporting quantitative remote sensing applications. Absolute radiometric calibration generally relies on ground reference targets with known radar cross-section (RCS) deployed at dedicated calibration sites. Such ground-based calibration methods are costly and time-consuming, and calibration frequency is constrained by the distribution of calibration sites and the satellite revisit cycles. Additionally, for specialized SAR missions, such as deep space exploration, deploying calibration equipment on the observed extraterrestrial surface is infeasible. This study proposes a space-based absolute calibration concept using a small calibration satellite carrying a well-characterized reference (e.g., a passive reflector or an active transponder) and flying in formation with the SAR satellite. The relative motion ensures a side-looking acquisition geometry, enabling the SAR to image the accompanying target and derive calibration factors. The overall calibration process is divided into two stages: determination of an in-orbit calibration factor using the calibration satellite, followed by its transformation to accommodate ground imaging conditions. This method effectively isolates the radar system gain to characterize the intrinsic hardware response. Furthermore, by operating entirely in space, it avoids atmospheric and ground-clutter distortions, ensuring a fully space-based, end-to-end calibration process dominated primarily by sensor systematic errors. Moreover, it allows for more frequent and flexible calibration, eliminating reliance on ground calibration sites and infrastructure. The feasibility and advantages of the proposed concept are demonstrated through comprehensive simulations, covering orbit analysis, echo simulation, and image processing. Full article

Accurately monitoring the surface stabilization of waste dumps in open-pit coal mines is critical for hazard prevention and ecological reclamation. In arid and semi-arid regions, traditional optical remote sensing vegetation indices suffer from a systematic “response lag” in assessing physical stability due to the slow establishment of pioneer vegetation. To overcome this biological limitation, this study proposes a quantitative spatiotemporal monitoring framework based on time-series Interferometric Synthetic Aperture Radar (InSAR) coherence to detect early-stage geotechnical stabilization. Using Sentinel-1 imagery of the Balongtu coal mine, a sliding-window detection algorithm was developed to capture the physical transition of surface electromagnetic scattering mechanisms from active disturbance to stable consolidation. The main findings are as follows: (1) Statistical analysis identified a critical geophysical coherence threshold of 0.15, which effectively and objectively distinguishes active dumping disturbance zones from structurally stable areas. (2) The spatiotemporal evolution dynamics of the completed dump areas from 2017 to 2023 were successfully characterized, revealing that 87.6% of the open-pit areas achieved physical stabilization within three years post-mining, with a spatial distribution highly consistent with the objective operational rule of “mining first, dumping later”. (3) Accuracy assessment using 700 spatiotemporally balanced validation points—derived through strict visual interpretation of high-resolution optical imagery—demonstrated high algorithm reliability, achieving overall accuracies (OA) of 87.57% and 90.43% at half-yearly and annual monitoring intervals, respectively. By decoupling physical surface stabilization from optical greenness, this study provides a timely abiotic precursor indicator, offering scientific, quantitative decision support for precision ecological zoning and accelerated land turnover approval in mining areas. Full article

Surface subsidence induced by underground coal mining is a primary driver of ecological degradation. The traditional Remote Sensing Ecological Index (RSEI), however, struggles to capture surface deformation constraints and vegetation response lags. To address this, we developed a Mining Deformation–Ecology Coupling Index (MDECI). This index integrates Interferometric Synthetic Aperture Radar (InSAR)-monitored surface stability with multi-spectral indicators via Principal Component Analysis (PCA). We applied this method to the Datong Coalfield, China, using 231 Sentinel-1A SAR scenes and 8 Landsat images (2017–2024) to validate the effectiveness of the index. Meanwhile, we systematically analyzed non-linear response mechanisms, the Ecological Turning Point (ETP), and spatial clustering characteristics. The results demonstrate the following: (1) InSAR and MDECI effectively identified patterns of surface subsidence and ecological decline. Subsidence centers expanded to a maximum of −2085 mm, causing the mean MDECI in these areas to drop to 0.185 (<−1800 mm). This represents a 57.4% decrease relative to the regional average (0.434). (2) MDECI outperformed traditional models with a stable Average Correlation Coefficient (ACC) (0.63–0.75) and high cross-correlation coefficients with RSEI (0.906) and the Mine-specific Eco-environment Index (MSEEI) (0.931). During the 2018 drought, MDECI maintained a robust ACC of 0.628 while RSEI dropped to 0.482. (3) Multi-scale analysis revealed a unimodal MDECI response with an ETP at −100 mm. Initial ‘micro-disturbance gain’ (0.371 to 0.471) is followed by a progressive decline to a minimum of 0.185 under severe deformation. (4) Local Indicators of Spatial Association (LISA) spatial clustering characterized the distribution patterns of ecological damage and localised high-maintenance areas. High–Low damaged areas accounted for 5.09%, while High–High high-maintenance areas reached 9.00%. The scale of High–High areas was approximately 1.77 times that of the damaged areas. The MDECI addresses the deficiencies of traditional indices in high-disturbance areas and isolates the impact of mining on the ecology, providing a quantitative basis for risk identification and differentiated restoration. Full article

The performance of remote sensing-based mineral alteration extraction is significantly restricted in the vegetation area. Spectral unmixing is one of the effective methods to address the vegetation problem during mineral alteration extraction. However, the spectral curves of different tree species vary a lot; if multiple tree species are regarded as a whole during the spectral unmixing stage, the proportions of vegetation would be estimated with more errors. The purpose of this study was to verify the effects of dominant tree species classification on spectral unmixing and reconstruction, and to apply the proposed method to the mineral alteration extraction practice. To accomplish this, the Shabaosi gold deposit region in Mohe City, China, with an area of 650 km², was selected as the study area. Firstly, reference spectral curves, GaoFen-1/6 (GF-1/6) satellite imageries, ZiYuan-1F (ZY-1F) satellite imageries, Sentinel-1B satellite synthetic aperture radar (SAR) data, the ALOS digital elevation model (DEM), and sub-compartment dominant tree species data were collected; subsequently, simulated mixed-pixel reflectance images of ZY-1F, reflectance images of GF-1/6, ZY-1F, backscattering data of Sentinel-1B, slope, aspect, and 5484 tree species samples were derived from the collected data. Secondly, to verify the effect of dominant tree species classification on mineral alteration extraction, the reference spectra of pine, oak, goethite, and kaolinite were used to construct a simulated ZY-1F mixed-pixel image, and spectral unmixing and reconstruction experiments were conducted. Thirdly, fourteen independent variables were selected from the derived data, five dominant tree species classification models were trained and tested using tree species samples via the ResNet50 algorithm, and the pine- and birch-dominated parts were segmented from the ZY-1F images. Fourthly, minimum noise fraction (MNF), pixel purity index (PPI), n-dimensional visualizer auto-clustering, and spectral angle mapper (SAM) methods were separately applied to the pine- and birch-dominated parts of ZY-1F images to extract and identify endmembers; subsequently, the fully constrained least squares (FCLS) and linear spectral unmixing (LSU) methods were separately applied to the pine- and birch-dominated parts to estimate endmember proportions and generate spectrally reconstructed ZY-1F images. Fifthly, the pine- and birch-dominated parts of spectrally reconstructed ZY-1F images were mosaiced, and the SAM was utilized to extract mineral alteration in the study area. The result showed that in the spectral unmixing and reconstruction experiment, the spectral reconstruction error declined from 0.0594 (simulated ZY-1F image without segmentation) to 0.0292 and 0.0388 (simulated ZY-1F image that was segmented by pine- and oak-dominated parts), suggesting that dominant tree species classification could improve the accuracy of spectral unmixing and reconstruction and help obtain a more reliable mineral alteration extraction result. In the study area, the tested overall accuracies (OA) and Kappa coefficients of the five dominant tree species classification models were 0.75 ± 0.03 and 0.50 ± 0.05, respectively, suggesting that conducting dominant tree species classification was feasible in dense vegetation areas and could facilitate mineral alteration extraction. After segmenting the ZY-1F image by pine- and birch-dominated parts and spectral reconstruction, eight main types of alteration, including kaolinite, vesuvianite, montmorillonite, rutile, limonite, mica, sphalerite, and quartz, were identified, and nine mineral alteration areas (MA) were delineated accordingly. Full article

Accurate large-scale crop mapping is critical for yield prediction, agricultural disaster monitoring, and global food security. Synthetic aperture radar (SAR), with its all-weather imaging capability, plays a vital role in remote sensing based on crop mapping studies. However, although feature-level fusion has been widely explored in remote sensing, existing VV and VH fusion approaches for rice mapping are still predominantly conducted at the data level and fail to adequately integrate their complementary information across the rice growth cycle, so the simplistic fusion methods yield features that are redundant or conflicting at field boundaries and in heterogeneous areas, thereby increasing classification errors. To address these challenges, this study proposes a novel spatiotemporal attention model (SimTA) for feature fusion to improve rice mapping. (1) A VV-VH feature-level fusion scheme is designed, integrated with a Content-Guided Attention (CGA) fusion method which effectively exploits the complementary information of the dual-polarized SAR data for achieving deep spatiotemporal dynamics fusion. (2) A Central Difference Convolution Spatial Extraction Conv (CDCSE Conv) Block is designed, enhancing sensitivity to edge variations in rice fields by combining standard and central difference convolutions. (3) To achieve efficient spatiotemporal feature integration across SAR time series, a Temporal–Spatial Attention (TSA) Block is developed, utilizing large-kernel convolutions for spatial feature extraction and a squeeze-and-excitation mechanism for capturing long-range temporal dependencies of rice time series. Extensive experiments were conducted by comparing SimTA with different models under five fusion schemes. Results demonstrate that feature-level fusion consistently outperforms other schemes, with SimTA achieving the best performance: OA = 91.1%, F1 score = 90.9%, and mIoU = 86.2%. Compared to the baseline Simple Video Prediction (SimVP), SimTA improves F1 score and mIoU by 0.8% and 2.1%, respectively. The CGA enhanced feature-level fusion further boosts SimTA’s performance to OA = 91.5% and F1 = 91.4%. SimTA bridges the gap between existing VV-VH deep fusion schemes and modern spatiotemporal modeling demands, offering a more accurate and generalizable approach for large-scale rice field mapping. Full article

Polarimetric high-resolution range profiles (HRRPs) contain rich amplitude and phase information scattered from targets, making them essential for radar remote sensing applications. However, current HRRP imaging methods still face challenges in achieving precise full-polarization measurements. In addition, they are either affected by off-grid errors thus introducing spurious scattering centers (SCs), fail to utilize polarimetric priors from the channels, or encounter high computational complexity. Some of these issues limit the quality of polarimetric HRRPs, while others result in excessive computational load, hindering their application on orbital remote sensing platforms. This paper proposes a fast gridless polarimetric HRRP imaging method. First, we introduce the novel virtual full polarization sparse stepped-frequency waveforms (VFP-SSFW) to improve channel isolation, in which each pulse is transmitted with either horizontal (H) or vertical (V) polarization, selected uniformly at random. Then, we propose a polarimetric atomic norm minimization (P-ANM)-based imaging framework formulated within distributed compressed sensing (DCS), which fully exploits the joint sparsity across polarization channels while inherently eliminating off-grid errors. Additionally, we develop a fast algorithm based on alternating direction method of multipliers (ADMM) to enable efficient implementation. The proposed method can circumvent transmission channel crosstalk and can efficiently yield high-quality polarimetric HRRPs with co-registered SCs. The validity of the proposed method is demonstrated through simulated, electromagnetic, and measured experimental results. Full article

Long-term stability of dam infrastructure is crucial for flood protection, water resource management, and drinking water supply. In many regions, the increasing impact of climate change and structural aging necessitates advanced monitoring approaches for embankment and gravity dams. PSI has emerged as a valuable technique for detecting surface deformation rates with millimeter precision. This study presents a comprehensive monitoring concept that combines satellite-based PSI analyses with the first operational use of ECRs at dam sites in North Rhine-Westphalia (NRW), Germany. Over a period of more than two years, ECRs were observed under real-world conditions using Sentinel-1 data. Compared to traditional passive reflectors, ECRs offer improved signal stability and a compact design, making them particularly suitable for confined or sensitive dam environments. The analysis of displacement time series confirms the suitability of ECRs for long-term deformation monitoring in complex dam settings. Intercomparison of two PSI time series demonstrated high internal consistency (correlation > 0.9, RMSE < 1 mm), while validation against in situ measurements confirmed millimeter-level agreement with RMSE values between 2 and 5 mm and correlations up to 0.7. In addition, a dedicated web-based platform was developed to provide processed ECR-based PSI results to dam operators, offering interactive visualizations, time-series access, and standardized downloads. This integration of advanced interferometric synthetic aperture radar (InSAR) methods, innovative hardware, and user-oriented service delivery marks a significant step toward operational dam monitoring using satellite remote sensing. Full article

Inverse synthetic aperture radar (ISAR) image classification plays a crucial role in remote sensing, traffic monitoring, and maritime surveillance. However, existing methods often suffer from limited labeled data, degraded image quality, and the insufficient adaptability of conventional loss functions. To address these issues, this paper proposes AdaProtoNet, a few-shot ISAR image classification framework based on a ResNet10 backbone and a combined adaptive and cross-entropy loss function. The model adopts a Prototypical Network architecture that balances feature extraction and class discrimination. A customized multicategory ISAR dataset is constructed through 3D target modeling and simulated radar imaging to support few-shot learning. Within the meta-learning paradigm, AdaProtoNet generates class prototypes by averaging support features and performs classification via Euclidean distance measurement. Experimental results demonstrate that AdaProtoNet achieves higher overall accuracy (OA) and stronger generalization than conventional ISAR classification methods. These findings highlight the effectiveness of adaptive-margin optimization in few-shot learning and provide guidance for the development of next-generation remote sensing recognition systems. Full article

Synthetic Aperture Radar (SAR) and optical image fusion technology plays a crucial role in remote sensing applications. It effectively combines the high spatial resolution and rich spectral information of optical images with the all-weather and penetrating observation advantages of SAR images, thereby significantly enhancing image interpretation accuracy and task execution capabilities. This paper systematically reviews deep learning-based fusion methods for SAR and optical images, with a particular focus on recent advances in deep learning models. Furthermore, it summarizes commonly used evaluation metrics for assessing fusion image quality, providing a basis for comparing and analyzing the performance of different methods. In addition, commonly used SAR-optical fusion datasets are briefly reviewed to highlight their roles in algorithm development and performance evaluation. Unlike conventional review articles, this paper further analyzes the guidance and supporting role of fusion algorithms from the perspective of typical and specific applications. Finally, it identifies key challenges and issues faced by current fusion methods, including data registration, model lightweight design, and multimodal feature alignment, and offers perspectives on future research directions. This review aims to provide routes and references for the development of SAR and optical image fusion technology. Full article

Tropical forests, despite their critical environmental and socio-economic roles, remain highly vulnerable to deforestation, forest degradation, and climate-related disturbances. There is a growing demand for robust and transparent forest monitoring systems, particularly under REDD+, the Paris Agreement’s Enhanced Transparency Framework (ETF), and emerging climate-finance mechanisms. Conventional approaches based on field inventories and traditional remote sensing are often constrained by limited or uneven field data, persistent cloud cover, complex forest conditions, and limited institutional and technical capacity. This review examines how artificial intelligence (AI) and machine learning (ML) are being integrated into remote sensing–based tropical forest monitoring to address these structural constraints. Using a semi-systematic synthesis of peer-reviewed studies, complemented by operational platforms and grey literature, the review assesses AI/ML approaches, remote sensing datasets, and applications relevant to national and large-scale monitoring. Evidence is synthesized across five analytical dimensions: AI/ML model families and workflows, multi-sensor datasets and training resources, operational monitoring platforms, application domains (including deforestation, degradation, and biomass/carbon estimation), and cross-cutting technical, institutional, and governance barriers. The review finds that AI/ML-enabled remote sensing, particularly those combining optical, radar, and LiDAR time series within cloud-based platforms, has substantially improved the automation, scalability, and speed of tropical forest monitoring. However, effective and equitable adoption remains constrained by limitations in training and validation data, dependence on proprietary platforms and data, uneven technical capacity, and unresolved governance and ethical challenges. Emerging solutions, including open and representative training datasets, platform-agnostic processing infrastructures, long-term capacity building, and inclusive data-governance frameworks, are identified as critical enablers of credible and nationally owned AI/ML-enabled forest-monitoring systems. The review highlights that AI/ML can play a transformative role in supporting climate mitigation, biodiversity conservation, and informed decision-making. This potential, however, depends on transparent data governance arrangements, long-term capacity building, and platform-agnostic infrastructures that support national ownership. Full article

The Nile River has played a central role in Egypt’s historical and cultural development, shaping ancient civilizations and settlement patterns. However, its course has changed dynamically over millennia, leaving behind buried channels and geomorphological features that are critical for reconstructing past hydrological landscapes. This study utilized Sentinel-2 satellite imagery within Google Earth Engine to develop a remote sensing method for analyzing spectral and temporal variations in vegetation as indicators of paleofluvial landforms and past river activity. The approach, applied to create ten seasonal representations, enhanced the detection of moisture-driven vegetation patterns. Here, the Moisture-Gradient Enhanced Vegetation Index (MGEVI) was developed to identify stable vegetated landforms and differentiate persistent moisture conditions from seasonal variations. Through this method, former river channels, river islands, and channel belts were identified, revealing patterns of past river activities. The results suggest a late anabranching phase of the Nile, characterized by the gradual stabilization of fluvial features in response to evolving hydrological conditions. A comparison between fluvial features identified through remote sensing and those mapped from TanDEM-X radar elevation data and historical maps revealed strong agreement, affirming the reliability of the remote sensing approach developed by this study. Evidence from sediment core analyses, stratigraphic correlation, and high-precision RTK field surveys further corroborated the existence of ancient, buried channels and islands within the study area. The study highlights the utility of multi-temporal satellite imagery analysis for reconstructing hydrological evolution and assessing past settlement suitability. Specifically, an inferred paleochannel near the Dendera Temple Complex suggests a possible hydrological connection between a former course of the Nile River and this archaeological site. These findings underscore the potential of remote sensing for large-scale geoarchaeological studies, offering scalable methodologies for identifying ancient river networks and supporting cultural heritage conservation in arid regions. Full article

This review provides a comprehensive bibliometric analysis of the literature on the integration of remote sensing data and machine learning or deep learning algorithms in precision agriculture. The analysis covers 1056 publications, included in the Web of Science Core Collection, and identifies the temporal patterns of research, the most frequently used algorithms, the prominent remote sensing technologies, and the geographical distribution of research output. Increased research output during the period of 2013–2025 is attributed to the availability of high-level computing, satellites, and UAV imagery. The earlier studies in machine learning primarily involved the use of the Random Forest and Support Vector Machine algorithms, whereas in the past few years, deep learning, and especially Convolutional Neural Networks, have become more dominant. The most widely used data sources in remote sensing are the imagery from UAVs and the Sentinel satellite missions. The evaluation revealed that most of the geographical research activity was centered in the United States and China, but there is a trend of increasing research activity in most of the other developed countries. Research in Africa and South America remains particularly underdeveloped. Considering the rapid development of research, data fusion of optical and radar satellite imagery, UAV imagery, weather and soil datasets are expected to further improve the representation of agricultural systems. Full article

Alpine wetlands in the Qinghai Lake Basin, located on the northeastern Qinghai–Tibetan Plateau, are ecologically important but highly vulnerable to climate change and anthropogenic disturbance. Traditional field-based surveys are labor-intensive and spatially constrained, underscoring the need for automated remote sensing approaches for large-scale wetland mapping. In this study, an object-based image analysis (OBIA) framework was developed by integrating Sentinel-2 optical imagery with Sentinel-1 synthetic aperture radar (SAR) data to classify two representative plateau wetland types: marsh meadows and inland tidal flats. Seven categories of features were evaluated, including spectral features, vegetation indices, water indices, red-edge features, topographic variables, radar backscatter, and geometric-textural metrics. The Separability and Thresholds (SEaTH) algorithm was employed for feature selection and optimization prior to classification using a Random Forest model. The results indicate that the incorporating geometric and textural features significantly improved classification performance, achieving an overall accuracy (OA) of 82.53% and a Kappa coefficient of 0.74. Moreover, the SEaTH-based feature optimization scheme yielded the best performance, with an OA of 86.24% and a Kappa coefficient of 0.79. Compared with the full feature set, this approach improved producer’s accuracy by 3.96–6.11% and increased overall accuracy by 1.48%. The proposed framework provides an effective and computationally efficient approach for mapping ecologically fragile alpine wetlands and offers valuable support for wetland conservation in the Qinghai Lake Basin. Full article

Pavement engineers frequently need a rapid and accurate evaluation of layer thicknesses and conditions. Such an assessment is critical for evaluating current conditions and identifying optimal maintenance and rehabilitation needs. The objective of this study was to use remote sensing for assessing pavement thickness uniformity. For this purpose, the potential use of Ground-Penetrating Radar (GPR) data was considered. Traditional GPR data interpretation methods are generally not intended to quantify the spatial variability information required for pavement management-related analyses. Thus, the method presented herein is based on several layers of statistical assessment of pavement thickness changes for identifying homogeneous sections. The suggested approach provides consistent thickness assessment over consecutive pavement segment lengths. Such evaluation is particularly useful for integration into Pavement Management System (PMS) analyses at both the project and network levels. The approach was used in concrete pavements, and data from an in-service roadway are provided as an example to demonstrate how this analysis is applied. This analysis approach provides several benefits to highway agencies: a quick and accurate condition assessment regarding existing pavement thickness; better decision-making in identifying alternative maintenance and rehabilitation techniques for uniform sections with respect to thickness, which clearly need to be combined with condition assessment of pavement layer materials; and efficient use of remote sensing data for pavement sections where construction inventory data may not be available. Full article

Every year, floods disrupt the lives of hundreds of millions of people worldwide. Their impacts are further intensified by climate change, rapid urbanization, and land-use changes, making it crucial to identify areas most susceptible to flooding. While machine learning (ML) models have proven effective in identifying flood susceptibility, their validity and the integration of human risk remain underexplored in geomorphologically complex and highly flood-prone regions. This study developed an ensemble ML framework for flood susceptibility mapping in the Kosi Megafan, located in Nepal and India. We compared its performance with established ML models and a one-dimensional convolutional neural network (1D-CNN), validated results using Dartmouth Flood Observatory (DFO) and Sentinel-1 SAR (Synthetic Aperture Radar) data, and assessed the population exposed to high-risk zones. A total of 13 (8 retained) flood conditioning factors (FCFs) were derived from remote sensing datasets, and a flood inventory was created to train multiple ML models, including Random Forest (RF), Extreme Gradient Boosting (XGBoost), Adaptive Boosting (AdaBoost), Support Vector Machine (SVM), 1D-CNN, and a Stacked Ensemble model. Among these, the stacked ensemble model achieved the highest performance (AUC = 0.76, accuracy = 0.70, precision = 0.69, recall = 0.72, F1-score = 0.70). The resulting susceptibility map identified high-risk zones mainly in the southern and southwestern Megafan, showing strong spatial agreement with the Sentinel-1-derived flood inventory and the DFO flood data (1992–2022). This study highlights the effectiveness of combining SAR-derived flood evidence with ensemble ML approaches for accurate and scalable flood susceptibility mapping in data-scarce, hazard-prone basins. Ultimately, the research supports efforts to build resilience and mitigate the long-term impact of flooding in the region. Full article