Search Results (3,381)

We experimentally and theoretically demonstrate coexistence of three different wavelength-multiplexed bound dual-frequency pulses in an all-fiber mode-locked fiber laser, effectively achieved by exploiting polarization-dependent loss effects and two uneven gain peaks of Er-doped fiber. With the single wall carbon-nanotube-based intensity modulation, wavelength-multiplexed dual-frequency pulses located at 1531.1 nm and 1556.6 nm are obtained. Changing the polarization rotation angles in the fiber cavity, one of the two asynchronous pulses evolves into a bound state of a doublet, in which the center wavelength of the bound solitons is centered at ~1530 nm or ~1556 nm. The relative phase between the two bound solitons or modulation depth of bound solitons can be switched by a polarization controller. A simulation method based on coupled Ginzburg–Landau equations is provided to characterize the laser physics and understand the mechanism behind the dynamics of tuning between different bound dual-frequency pulses. The proposed fiber laser will provide a potential way to understand multiple soliton dynamics and implementation in optical frequency combs generation. Full article

We employ the Dynamical Projective Operatorial Approach (DPOA) to investigate the ultrafast optical excitations of germanium under intense, ultrashort pump pulses. The method has very low resource demand relative to many other available approaches and enables detailed calculation of the residual electron and hole populations induced by the pump pulse. It provides direct access to the energy distribution of excited carriers and to the total energy transferred to the system. By decomposing the response into contributions from different multi-photon resonant processes, we systematically study the dependence of excited-carrier density and absorbed energy on key pump-pulse parameters: duration, amplitude, and photon energy. Our results reveal a complex interplay between these parameters, governed by resonant Rabi-like dynamics and competition between different multi-photon absorption channels. For the studied germanium setup, we find that two-photon processes are generally dominant, while one- and three-photon channels become significant under specific conditions of pump-pulse frequency, duration, and intensity. This comprehensive analysis offers practical insights for optimizing ultrafast optical control in semiconductors by targeting specific multi-photon pathways. Full article

Achieving high reliability remains the critical challenge for pulsed power supplies (PPS), whose core components are susceptible to severe degradation and catastrophic failure due to long-term operation under electrical, thermal and magnetic stresses, particularly those associated with high voltage and high current. This reliability challenge fundamentally limits the widespread deployment of PPSs in defense and industrial applications. This article provides a comprehensive and systematic review of the reliability challenges and recent technological progress concerning PPSs, focusing on three hierarchical levels: component, system integration, and extreme operating environments. The review investigates the underlying failure mechanisms, degradation characteristics, and structural optimization of key components, such as energy storage capacitors and power switches. Furthermore, it elaborates on advanced system-level techniques, including novel thermal management topologies, jitter control methods for multi-module synchronization, and electromagnetic interference (EMI) source suppression and coupling path optimization. The primary conclusion is that achieving long-term, high-frequency operation depends on multi-physics field modeling and robust, integrated design approaches at all three levels. In summary, this review outlines important research directions for future advancements and offers technical guidance to help speed up the development of next-generation PPS systems characterized by high power density, frequent repetition, and outstanding reliability. Full article

This paper proposes a wavefront-based method for detecting and locating single-line-to-ground faults in distribution lines using only the transient waveform recorded at one line terminal. The measured current is transformed into a time–frequency representation by the S-transform, and a low-rank structure is extracted by truncated singular value decomposition to suppress broadband noise. On this basis, a hysteresis-type energy envelope is constructed to determine the onset of the fault surge front. To distinguish the genuine fault echo—the main reflection associated with the fault location—from branch echoes and terminal ringing, three complementary criteria are combined: a generalized likelihood ratio test on the time–frequency energy, a dual-pulse interval matching based on the expected round-trip time between the terminal and the fault, and a multi-band consistency check over low-, medium-, and high-frequency components. Numerical experiments under different fault locations and signal-to-noise ratios show that the proposed method improves the average echo recognition rate by about 3.5% compared with conventional single-criterion detectors, while maintaining accurate wavefront-onset estimation with MHz-class sampling (1–5 MHz) that is readily available in practical on-line travelling-wave recorders, rather than relying on ultra-high sampling (e.g., tens of MHz and above). The method therefore offers a physically interpretable and practically feasible tool for fault-echo detection in overhead distribution feeders. Full article

With the rapid expansion of pulsar survey data driven by advanced radio telescopes such as FAST, automated detection methods have become crucial for the efficient and accurate identification of single-pulse signals. A key challenge in this task is the extreme class imbalance between genuine pulsar pulses and radio frequency interference (RFI), which significantly hampers classifier performance—particularly in low signal-to-noise ratio (S/N) environments. To address this issue and improve detection accuracy, we propose Pulsar-WRecon, a Wasserstein GAN with Gradient Penalty (WGAN-GP)-based framework designed to generate realistic single-pulse profiles. The synthetic samples generated by Pulsar-WRecon are used to augment training data and alleviate class imbalance. Building upon the enhanced dataset, Convolutional Kolmogorov–Arnold Network (CKAN) is further introduced as a novel hybrid model that integrates convolutional layers with KAN-based functional decomposition to better capture complex patterns in pulse signals. On the three-channel pulsar images from the HTRU1 dataset, our method achieves a recall of 97.5% and a precision of 98.5%. On the DM time series image dataset, FAST-DATASET, it achieves a recall of 93.2% and a precision of 92.5%. These results validate that combining generative data augmentation with an improved model architecture can effectively enhance the precision of single-pulse detection in large-scale pulsar surveys, especially in challenging, real-world conditions. Full article

Synaptic plasticity constitutes a fundamental mechanism of neural systems. Rhythmic activities (e.g., θ and γ oscillations) play a critical role in modulating network plasticity efficiency in biological neural systems. However, the rules governing plasticity and adaptive regulation of in vitro cultured networks under structured electrical stimulation remain insufficiently characterized. To quantitatively investigate these regulatory effects within a highly controlled and low-interference environment, we utilized primary mice hippocampal neurons cultured on multielectrode arrays (MEAs) and executed two dedicated sets of experiments. (1) Spatiotemporal electrical stimulation paradigms, combined with connectivity analysis, revealed pronounced regulation effects of network plasticity. (2) Physiologically inspired rhythmic stimulation (θ: 7.8 Hz, γ: 40 Hz) with varying pulse repetitions was then applied. Although both rhythms induced distinct frequency-dependent plasticity modulation, the disparity between their modulatory effects progressively diminished with increasing stimulation pulse numbers, suggesting an intrinsic adaptive regulatory mechanism. Collectively, our findings characterize the effects of plasticity regulation and reveal the mechanisms underlying adaptive convergence in in vitro neuronal systems. These results advance the understanding of network plasticity, providing a technical foundation for functional shaping and modulation of in vitro neural networks while supporting future explorations into learning-oriented modulation. Full article

Background: Rate-dependent depression of the Hoffmann reflex (RDD-HR) is a neurophysiological marker of spinal inhibition altered in several neurological conditions, yet no consensus exists on optimal stimulation frequency, number of stimuli, or the feasibility of upper limb recordings. This study aimed to define practical, standardized parameters for reliable RDD-HR assessment in upper and lower limbs of healthy adults, as a first step toward clinical application. Methods: In this observational study, bilateral Hoffmann reflexes were recorded from the flexor carpi radialis and soleus muscles in 21 healthy adults. Stimulation was delivered using three 10-pulse trains at seven frequencies (0.1–5 Hz). RDD-HR was quantified as the median H-reflex area, expressed as a percentage of the first response (lower values indicate greater depression). Optimal frequencies and minimal stimuli were identified by sigmoid fitting and confidence analyses, with train and stimulus effects tested by two-way ANOVA. Results: RDD-HR displayed a sigmoidal frequency–response across all limbs. Maximal depression occurred at 1–5 Hz, with no significant differences between these frequencies, supporting 1 Hz as optimal. Depression was greater in lower limbs (~30%) than upper limbs (~47%). Reliable estimates were obtained using a single train of seven stimuli, with no benefit from averaging across trains. Upper limb recordings required lower stimulation intensities. Conclusions: RDD-HR can be reliably assessed using a simplified protocol based on a single seven-pulse train at two key frequencies. This standardized approach provides a methodological foundation for future clinical validation of RDD-HR as a biomarker of spinal inhibitory dysfunction. Full article

Epileptic seizures arise from abnormally synchronized neural activity and remain a major global health challenge, affecting more than 50 million people worldwide. Despite advances in pharmacological interventions, a significant proportion of patients continue to experience uncontrolled seizures, underscoring the need for alternative neuromodulation strategies. Rhythmic neural entrainment has recently emerged as a promising mechanism for disrupting pathological synchrony, but most existing systems rely on complex analog electronics or high-power stimulation hardware. This study investigates a proof-of-concept digital custom-designed chip that generates a stable 6 Hz oscillation capable of imposing a stable rhythmic pattern onto digitized seizure-like EEG dynamics. Using a publicly available EEG seizure dataset, we extracted and averaged analog seizure waveforms, digitized them to emulate neural front-ends, and directly interfaced the digitized signals with digital output recordings acquired from the chip using a Saleae Logic analyser. The chip’s pulse train was resampled and low-pass-reconstructed to produce an analog 6 Hz waveform, allowing direct comparison between seizure morphology, its digitized representation, and the entrained output. Frequency-domain and time-domain analyses demonstrate that the chip imposes a narrow-band 6 Hz rhythm that overrides the broadband spectral profile of seizure activity. These results provide a proof-of-concept for low-power digital custom-designed entrainment as a potential pathway toward simplified, wearable neuromodulation device for future healthcare diagnostics. Full article

Transcranial magnetic stimulation (TMS) is a non-invasive neuromodulation technique that utilizes magnetic fields to induce cortical electric currents, enabling both the measurement and modulation of neuronal activity. Initially developed as a diagnostic tool, TMS now serves dual roles in clinical neurology, offering insight into neurophysiological dysfunctions and the therapeutic modulation of abnormal cortical excitability. This review examines key TMS outcome measures, including motor thresholds (MT), input–output (I/O) curves, cortical silent periods (CSP), and paired-pulse paradigms such as short-interval intracortical inhibition (SICI), short-interval intracortical facilitation (SICF), intracortical facilitation (ICF), long interval cortical inhibition (LICI), interhemispheric inhibition (IHI), and short-latency afferent inhibition (SAI). These biomarkers reflect underlying neurotransmitter systems and can aid in differentiating neurological conditions. Diagnostic applications of TMS are explored in Parkinson’s disease (PD), dystonia, essential tremor (ET), Alzheimer’s disease (AD), and mild cognitive impairment (MCI). Each condition displays characteristic neurophysiological profiles, highlighting the potential for TMS-derived biomarkers in early or differential diagnosis. Therapeutically, repetitive TMS (rTMS) has shown promise in modulating cortical circuits and improving motor and cognitive symptoms. High- and low-frequency stimulation protocols have demonstrated efficacy in PD, dystonia, ET, AD, and MCI, targeting the specific cortical regions implicated in each disorder. Moreover, the successful application of TMS in differentiating and treating AD and MCI underscores its clinical utility and translational potential across all neurodegenerative conditions. As research advances, increased attention and investment in TMS could facilitate similar diagnostic and therapeutic breakthroughs for other neurological disorders that currently lack robust tools for early detection and effective intervention. Moreover, this review also aims to underscore the importance of maintaining standardized TMS protocols. By highlighting inconsistencies and variability in outcomes across studies, we emphasize that careful methodological design is critical for ensuring the reproducibility, comparability, and reliable interpretation of TMS findings. In summary, this review emphasizes the value of TMS as a distinctive, non-invasive approach to probing brain function and highlights its considerable promise as both a diagnostic and therapeutic modality in neurology—roles that are often considered separately. Full article

Post-traumatic olfactory dysfunction (PTOD) is a common and often persistent sequela of mild traumatic brain injury (mTBI), with limited evidence-based treatment options. We propose that high-frequency rTMS applied to the left dorsolateral prefrontal cortex (DLPFC) may support olfactory recovery via top-down modulation of distributed olfactory, attentional, and reward networks, and we outline key mechanistic and methodological considerations for future studies. We summarize the case of a 70-year-old woman with severe post-traumatic hyposmia persisting for ~5 months, who underwent a 12-week, 10 Hz rTMS course over left DLPFC (36 sessions; 800 pulses/session). Using a structured door diary and repeated ratings across odour categories, she reported stepwise improvement starting around sessions 10–12 (re-emergence of pungent odours) and progressing to broad restoration, including subtle fragrances, by treatment end; no adverse events occurred. While causality cannot be inferred from a single case, this pattern is consistent with a network-level neuromodulatory effect and motivates controlled trials combining standardized olfactory testing with neurophysiology and neuroimaging. Full article

This study investigates the influence of solar flare events on the time–frequency characteristics of very low frequency (VLF) signals based on observations from the China Seismo–Electromagnetic Satellite (CSES) satellite. By analyzing the VLF electromagnetic wave HDF5 data downloaded on the day of the solar flare, the data were converted into a sequence of spectrograms, and linear structures within them were identified using image processing techniques and the K-means clustering algorithm. In this work, we detect more than twenty candidate transient near-vertical stripe elements (image-domain linear features) in the VLF spectrograms on solar-flare event days and use them as an operational texture fingerprint for large-scale screening. This finding suggests that solar flare events may trigger pulse sequence phenomena in VLF signals, providing new observational evidence for understanding the impact of solar activity on the ionosphere and offering a new perspective for investigating solar-flare effects using VLF signals. Full article

With the increasing integration of renewable energy sources into the grid, power quality at the point of common coupling (PCC)—particularly harmonic distortion introduced by power electronic converters—has become a critical concern. This paper presents a rigorous design and evaluation of a three-phase, fifteen-level cascaded H-bridge multilevel inverter (CHB MLI) with an LCL filter, selected for its superior harmonic attenuation, compact size, and cost-effectiveness compared to conventional passive filters. The proposed system employs Phase-Shifted Pulse Width Modulation (PS PWM) for balanced operation and low output distortion. A systematic, reproducible methodology is used to design the LCL filter, which is then tested across a wide range of switching frequencies (1–5 kHz) and grid impedance ratios (X/R = 2–9) in MATLAB/Simulink R2025a. Comprehensive simulations confirm that the filter effectively reduces both voltage and current total harmonic distortion (THD) to levels well below the 5% limit specified by IEEE 519, with optimal performance (0.53% current THD, 0.69% voltage THD) achieved at 3 kHz and X/R ≈ 5.6. The filter demonstrates robust performance regardless of grid conditions, making it a practical and scalable solution for modern renewable energy integration. These results, further supported by parametric validation and clear design guidelines, provide actionable insights for academic research and industrial deployment. Full article

This study introduces a novel hybrid model for an electromembrane stack, unifying an equivalent electrical circuit model incorporating specific resistance ($R_M,R_s$) and capacitance ($C_{gs},C_{dl}$) parameters with an empirical fouling model in a single framework. The model simplifies the traditional approach by serially connecting N ($N=10$) ion exchange membranes (anionic PC-SA and cationic PC-SK) and is validated using $NaCl$ and $N{a}_{2}S{O}_4$ solutions in comparison with laboratory tests using various voltage signals, including direct current and electrically pulsed reversal operations at frequencies of 2000 and 4000 Hz. The model specifically accounts for the chemical stratification of the cell unit into bulk solution, diffusion, and Stern layers. We also included a calibration method using correction factors (${\alpha }_i$) to fine-tune the electrical current signals induced by voltage stimulation. The empirical component of the model uses experimental data to simulate membrane fouling, ensuring consistency with laboratory-scale desalination processes performed under pulsed reversal operations and achieving a prediction error of less than 10%. In addition, a comparative analysis was used to assess the increase in electrical resistance due to fouling. By integrating electronic and empirical electrochemical data, this hybrid model opens the way to the construction of simple, practical, and reliable models that complement theoretical approaches, signifying an advance for a variety of electromembrane-based technologies. Full article

Sulfamethoxazole (SMX), a widely used antibiotic, poses potential threats to ecosystems and human health due to its persistence and residues in aquatic environments. This study developed a novel intelligent water treatment system, namely Intelligent Pulsed Electrochemical Activation of NaClO₂ (IPEA_NaClO2), which integrates a FeCuC-Ti₄O₇ composite electrode with machine learning (ML) to achieve efficient SMX removal and energy consumption optimization. Six key operational parameters—initial SMX concentration, NaClO₂ dosage, reaction temperature, reaction time, pulsed potential, and pulsed frequency—were systematically investigated to evaluate their effects on removal efficiency and electrical specific energy consumption (E-SEC). Under optimized conditions (SMX 10 mg L⁻¹, NaClO₂ 60~90 mM, pulsed frequency 10 Hz, temperature 313 K) for 60 min, the IPEA_NaClO2 system achieved an SMX removal efficiency of 89.9% with a low E-SEC of 0.66 kWh m⁻³. Among the ML models compared (back-propagation neural network, BPNN; gradient boosting decision tree, GBDT; random forest, RF), BPNN exhibited the best predictive performance for both SMX removal efficiency and E-SEC, with a coefficient of determination (R²) approaching 1 on the test set. Practical application tests demonstrated that the system maintained excellent stability across different water matrices, achieved a bacterial inactivation rate of 98.99%, and significantly reduced SMX residues in a simulated agricultural irrigation system. This study provides a novel strategy for the intelligent control and efficient removal of refractory organic pollutants in complex water bodies. Full article

Seismic surveys introduce high levels of noise into the soundscape. Thus, a major concern is the effect of these noise levels on animal communication, especially for species with high hearing acuity, such as cetaceans. We evaluated the effects of airgun pulses of seismic surveys on the acoustic behavior of humpback whales (Megaptera novaeangliae) and pantropical spotted dolphins (Stenella attenuata) in the two most important basins for oil and gas off Brazil. We detect the presence of airgun pulses and measure sound pressure levels (SPL) to evaluate whether SPL changed the acoustic parameters of cetacean vocalizations. Airgun pulses increased the SPL by 17%. This changes acoustic parameters differently: whales reduced call frequency and duration, while dolphins increased these parameters. In both cases, responses may be related to physiological limitations in sound modulation of each species. This was the first report on the impacts of seismic surveys on cetaceans’ communications in Brazil and the first for the pantropical spotted dolphin on this topic in the world. Impacts vary with the frequency and duration of emissions, indicating species-specific acoustic responses that depend on airgun noise characteristics. Whales cannot make efficient adjustments at higher or lower frequencies, and dolphins cannot adjust at lower frequencies. These results are important for discussing the effects of airgun noise on cetacean communication. Full article