Search Results (43)

In this study, novel triblock copolymers, including poly(N-isopropylacrylamide)-block-poly(ε-caprolactone)-block-poly(N-isopropylacrylamide) (PNIPAM-b-PCL-b-PNIPAM), poly(N-vinyl-pyrrolidone)-block-poly(ε-caprolactone)-block-poly(N-vinyl-pyrrolidone) (PNVP-b-PCL-b-PNVP), poly(N-isopropylacrylamide-co-N,N-dimethylaminoethyl methacrylate)-block-poly(ε-caprolactone)-block-poly(N-isopropylacrylamide-co-N,N-dimethylaminoethyl methacrylate) (P(DMAEMA-co-NIPAM)-b-PCL-b-P(NIPAM-co-DMAEMA)), and poly(N,N-dimethylacrylamide)-block-poly(ε-caprolactone)-block-poly(N,N-dimethylacrylamide) (PDMA-b-PCL-b-PDMA), were synthesized via a combination of ring-opening polymerization (ROP) and reversible addition–fragmentation chain transfer (RAFT) polymerization. The synthesis was performed using novel bifunctional PCL-based RAFT macro chain transfer agents (macroCTAs; MXTPCL-X1 and MXTPCL-X2) with a m-xylene-bis(2-mercaptoethyloxy) core. Initially, m-xylene-bis(1-hydroxy-3-thia-propane) (MXTOH), which has not previously been used in lactone polymerization, was synthesized via the reaction of α,α′-dibromo-m-xylene with 2-mercaptoethanol in the presence of sodium in ethanol. Subsequently, Sn(Oct)₂-catalyzed ROP of ε-caprolactone (ε-CL) using MXTOH as an initiator yielded PCL-diol (MXTPCLOH). The resulting PCL-diol underwent further functionalization through esterification and substitution reactions, leading to the formation of PCL-based RAFT macroCTAs. Triblock copolymers were synthesized using these macroCTAs with AIBN as an initiator. The synthesized products, along with their intermediates, were characterized using FTIR and ¹H NMR spectroscopy. The number average molecular weight (M_n) and polydispersity index (Ð) of PCL-based macroCTAs were determined by using GPC analysis. The sensor capabilities of the synthesized novel triblock copolymers were investigated on the determination of syringic acid and it was determined that the most sensitive polymer was PNVP-b-PCL-b-PNVP (MXTP2). The working range was between 1.5 µg/mL and 15 µg/mL and the limit of detection (LOD) was found to be 0.44 µg/mL using DPV on MXTP2 polymer sensor. Full article

One of the most used methods for capturing acidic gases from the atmosphere is the use of amines that react with the acids and can later be recovered. The choice of amines that are most efficient in capturing has been the subject of several studies; however, the energy effort for their regeneration is also important. While the polarity of the solvent plays a critical role in determining which amines efficiently capture CO₂, the heat capacity of the solvent is also a significant factor in the regeneration process. In this work, we present values for Reichardt’s $E_{\mathrm{T}}^{\mathrm{N}}\left(30\right)$ and Kamlet−Taft parameters, such as π* (dipolarity/polarizability), α (acidity), and β (basicity), for solutions of two alkanolamines and two alkoxyamines dissolved in propane-1,3-diol, at 298.15 K, a solvent with a lower heat capacity than water. In addition to the polarity characterization of the amines in that solvent, the aim of this study is to analyze the differences observed in the solvatochromic parameters when water is replaced by alcohol. The impact of this change on the values of those parameters for the binary amine + solvent solutions was assessed by calculating the transfer values, ${\Delta }_{\mathrm{transf}}\left(F_i,x_i\right)$. Defined as, ${\Delta }_{\mathrm{transf}}\left(F_i,x_i\right)=F_i\left(1,3\mathrm{PD}\right)-F_i\left({\mathrm{H}}_2\mathrm{O}\right)$, these transfer values represent the difference in the parameters when the amines are transferred from water to alcohol. While the water medium is more favourable in terms of π* for CO₂ capture, the alcohol medium appears to hold more promise in terms of β. Full article

Thiochroman derivatives are highly versatile molecules widely used for the synthesis of novel heterocycles and bioactive compounds. In our study, we conducted the biotransformation of thiochroman-4-ol (1) and 6-chlorothiochroman-4-ol (1a) using the marine-derived fungal strains Emericellopsis maritima BC17 and Purpureocillium lilacinum BC17-2. Biotransformations yielded ten known thiochroman derivatives along with the compound 1-(5-chloro-2-(methylthio)phenyl)propane-1,3-diol (6a), which was described for the first time. Moreover, we successfully characterized the stereoisomers of sulfoxides 3 and 3a. Their structures and absolute configurations were established though comprehensive analyses of NMR, HR ESI-MS, and ECD spectra, as well as by using Mosher’s method. Antimicrobial activity of the isolated metabolites was evaluated against bacterial and fungal human pathogens, specifically Staphylococcus aureus ATCC 29213, Escherichia coli ATCC25922, and Candida albicans HPM-1922816. Full article

Monoamine oxidase A (MAO-A) is the main enzyme that deaminates serotonin. Correct serotonin concentration regulates appetite, improves well-being, reduces symptoms of depression, but also improves memory and heart function. In this study, the use of new compounds chemo-enzymatically synthesized from propenylbenzene derivatives as MAO-A inhibitors was proposed. Isothermal titration calorimetry analysis and molecular modeling were used to determine the inhibitory effect of MAO-A. The main compounds such as propenylbenzenes were observed to have no inhibitory effect. However, in the case of diols and hydroxy ketones, the compounds showed MAO-A inhibitory effects. In particular, 1-(4-hydroxy-3-methoxyphenyl)propane-1,2-diol, both in isothermal titration calorimetry (ITC) and molecular modeling, showed high affinity for the MAO-A enzyme, thus protecting serotonin from deamination. The results suggest that propenylbenzene derivatives, such as diols and hydroxy ketones, bind to MAO-A at the active site. This suggests their potential to be used as drugs or food supplements to prevent depression. These studies may constitute a new tool for further in vivo and in vitro studies. Full article

Pyridinium salts of 2-piperidinyl-6-triazolylpurine derivatives were obtained by the introduction of pyridinium moieties into the propane-1,3-diol fragment at the N(9) position of purine to enhance the solubility of 2-amino-6-triazolylpurine derivatives in water. Target structures were obtained using the tosylation of hydroxyl groups of 2-(6-(4-(4-methoxyphenyl)-1H-1,2,3-triazol-1-yl)-2-(piperidin-1-yl)-9H-purin-9-yl)propane-1,3-diol, the subsequent introduction of pyridine, and ion exchange. The compounds were characterized using ¹H- and ¹³C-NMR spectra, FTIR, UV–Vis, and HRMS data. Full article

The study objective was to design and characterise herein unreported polyologels composed of a range of diol and triol solvents and polyvinyl methyl ether-co-maleic acid (PVM/MA) and, determine their potential suitability for the treatment of periodontal and related diseases in the oral cavity using suitable in vitro methodologies. Polyologel flow and viscoelastic properties were controlled by the choice of solvent and the concentration of polymer. At equivalent polymer concentrations, polyologels prepared with glycerol (a triol) exhibited the greatest elasticity and resistance to deformation. Within the diol solvents (PEG 400, pentane 1,5-diol, propane 1,2-diol, propane 1,3-diol, and ethylene glycol), PEG 400 polyologels possessed the greatest elasticity and resistance to deformation, suggesting the importance of distance of separation between the diol groups. Using Raman spectroscopy bond formation between the polymer carbonyl group and the diol hydroxyl groups was observed. Polyologel mucoadhesion was influenced by viscoelasticity; maximum mucoadhesion was shown by glycerol polyologels at the highest polymer concentration (20% w/w). Similarly, the choice of solvent and concentration of PVM/MA affected the release of tetracycline from the polyologels. The controlled release of tetracycline for at least 10 h was observed for several polyologels, which, in combination with their excellent mucoadhesion and flow properties, offer possibilities for the clinical use of these systems to treat diseases within the oral cavity. Full article

Syntheses of novel bifunctional poly(methyl methacrylate) (PMMA)-, poly(styrene) (PS)-, and (poly ε-caprolactone) (PCL)-based atom transfer radical polymerization (ATRP) macroinitiators derived from p-xylene-bis(1-hydroxy-3-thia-propanoloxy) core were carried out to obtain ABA-type block copolymers. Firstly, a novel bifunctional ATRP initiator, 1,4-phenylenebis(methylene-thioethane-2,1-diyl)bis(2-bromo-2-methylpropanoat) (PXTBR), synthesized the reaction of p-xylene-bis(1-hydroxy-3-thia-propane) (PXTOH) with α-bromoisobutryl bromide. The PMMA and PS macroinitiators were prepared by ATRP of methyl methacrylate (MMA) and styrene (S) as monomers using (PXTBR) as the initiator and copper(I) bromide/N,N,N′,N″,N″-pentamethyldiethylenetriamine (CuBr/PMDETA) as a catalyst system. Secondly, di(α-bromoester) end-functionalized PCL–based ATRP macronitiator (PXTPCLBr) was prepared by esterification of hydroxyl end groups of PCL-diol (PXTPCLOH) synthesized by Sn(Oct)₂–catalyzed ring opening polymerization (ROP) of ε-CL in bulk using (PXTOH) as initiator. Finally, ABA-type block copolymers, PXT(PS-b-PMMA-b-PS), PXT(PMMA-b-PS-b-PMMA), PXT(PS-b-PCL-b-PS), and PXT(PMMA-b-PCL-b-PMMA), were synthesized by ATRP of MMA and S as monomers using PMMA-, PS-, and PCL-based macroinitiators in the presence of CuBr/PMDETA as the catalyst system in toluene or N,N-dimethylformamide (DMF) at different temperatures. In addition, the extraction abilities of PCL and PS were investigated under liquid–liquid phase conditions using heavy metal picrates (Ag⁺, Cd²⁺, Cu²⁺, Hg²⁺, Pb²⁺, and Zn²⁺) as substrates and measuring with UV-Vis the amounts of picrate in the 1,2–dichloroethane phase before and after treatment with the polymers. The extraction affinity of PXTPCL and PXTPS for Hg²⁺ was found to be highest in the liquid–liquid phase extraction experiments. Characterizations of the molecular structures for synthesized novel initiators, macroinitiators, and the block copolymers were made by spectroscopic (FT–IR, ESI–MS, ¹H NMR, ¹³C NMR), DSC, TGA, chromatographic (GPC), and morphologic SEM. Full article

Perovskite Solar Cells (PSCs) have attracted attention due to their low cost, easy solution processability, high efficiency, and scalability. However, the benchmark expensive hole transport material (HTM) 2,2′,7,7′-tetrakis[N, N-di(4-methoxyphenyl)amino]-9,9′-spirobifluorene (Spiro-MeOTAD), which is traditionally solution-processed with toxic solvents such as chlorobenzene (CB), dichlorobenzene (DCB), or toluene, is a bottleneck. To address this issue, this work investigates the implementation of Zn(II), Cu(II), or Co(II) tetra-tert-butylphthalocyanines (TBU4-Cu, TBU4-Zn, TBU4-Co), established macrocyclic derivatives whose synthesis and processing inside the devices have been redesigned to be more environmentally sustainable and cost-effective by substituting conventional solvents with greener alternatives such as anisole, propane-1,2-diol, and their mixture, as dopant-free HTMs in planar n-i-p PSCs. The anisole-processed HTMs provided power conversion efficiencies (PCE) up to 12.27% for TBU4-Cu and 11.73% for TBU4-Zn, with better photovoltaic parameters than the corresponding cells made with chlorobenzene for which the best results obtained were, respectively, 12.22% and 10.81%. Full article

3-(2-Chloro-5-methylphenoxy)propane-1,2-diol 1 is a possible precursor in the chiral beta blocker Bupranolol synthesis. Both racemic and single-enantiomeric samples of 1 were synthesized and characterized by single crystal XRD. The absolute configuration of an (S)-1 sample was determined by data refinement (the value of the Flack parameter is 0.03(4)). Hydrogen-bonded supramolecular synthons (SMS) were identified for both crystals. In rac-1, as well as in (S)-1 crystals, one of the two main SMS is the homochiral chain ${\mathbf{C}}_{\mathbf{1}}^{\mathbf{1}}$(5):21 (⋯O1–C1–C2–O2–H2⋯). The second of the two SMSs changes is the change of chiral environment. For rac-1, this is the heterochiral chain ${\mathbf{C}}_3^3\left(9\right):\{12/12/21\};$ (⋯O2–C2–C1–O1–H1⋯O′2–H′2⋯O″1–H″1⋯), in which molecules with different configurations alternate. In (S)-1 crystals, this is the homochiral chain ${\mathbf{C}}_{\mathbf{1}}^{\mathbf{1}}$(2):11 (⋯O1–H1⋯). The results obtained once again confirm the influence of the chiral environment on the crystallization of scalarly identical molecules. Full article

Because of easy functionalization, low cost, and large-scale fabrication, pure organic fluorescent polymers are widely applied in light-emitting display, bio-fluorescence-enhanced imaging, explosive detection, and other fields. Among these applications, due to their unique optical rotation characteristics, chiral fluorescent polymer materials are part of fluorescent polymers which could be used in chiral molecular detection and separation, biological target detection, etc. In this work, we designed and synthesized the first chiral organic fluorescent polysulfate materials through sulfur fluoride exchange polymerization (new click chemistry) by asymmetric binaphthol molecular. The chiral fluorescent polysulfate were synthesized by R/S [1,1′-binaphthalene]-2,2′-diol(Binol.), propane-2,2-diylbis(4,1-phenylene) bis(sulfurofluoridate) (FO₂S–BA–SO₂F) and 4,4′-(propane-2,2-diyl)diphenol(BA.) through step-by-step polymerization reaction under alkali present. It was found that the local crystallization of pure bisphenol A polysulfate was broken by the asymmetric axial chiral BINOL molecule inserted in it and let the polymer into the amorphous state. Fluorescent chiral molecules are uniformly dispersed in the polymer; the 120 µm film prepared by the film scraper was transparent and had good luminescence characteristics under ultraviolet light. After fluorescence detection, the excitation wavelength is 450 nm, and the emission wavelength is 480 and 517 nm. Full article

The date palm (Phoenix dactylifera L.) is a popular edible fruit consumed all over the world and thought to cure several chronic diseases and afflictions. The profiling of the secondary metabolites of optimized ripe Ajwa date pulp (RADP) extracts is scarce. The aim of this study was to optimize the heat extraction (HE) of ripe Ajwa date pulp using response surface methodology (RSM) and artificial neural network (ANN) modeling to increase its polyphenolic content and antioxidant activity. A central composite design was used to optimize HE to achieve the maximum polyphenolic compounds and antioxidant activity of target responses as a function of ethanol concentration, extraction time, and extraction temperature. From RSM estimates, 75.00% ethanol and 3.7 h (extraction time), and 67 °C (extraction temperature) were the optimum conditions for generating total phenolic content (4.49 ± 1.02 mgGAE/g), total flavonoid content (3.31 ± 0.65 mgCAE/g), 2,2-diphenyl-1-picrylhydrazyl (11.10 ± 0.78 % of inhibition), and cupric-reducing antioxidant capacity (1.43 µM ascorbic acid equivalent). The good performance of the ANN was validated using statistical metrics. Seventy-one secondary metabolites, including thirteen new bioactive chemicals (hebitol II, 1,2-di-(syringoyl)-hexoside, naringin dihydrochalcone, erythron-guaiacylglycerol-β-syringaresinol ether hexoside, erythron-1-(4′-O-hexoside-3,5-dimethoxyphenyl)-2-syrngaresinoxyl-propane-1,3-diol, 2-deoxy-2,3-dehydro-N-acetyl-neuraminic acid, linustatin and 1-deoxynojirimycin galactoside), were detected using high-resolution mass spectroscopy. The results revealed a significant concentration of phytoconstituents, making it an excellent contender for the pharmaceutical and food industries. Full article

A series of calcium oxide–magnesium oxide (CaO–MgO) catalysts were prepared under the effects of different precipitating agents and using varied Mg/Ca ratios. The physiochemical characteristics of the prepared catalysts were analyzed using XRD, FE-SEM, BET, FTIR, and TG/DTA techniques. Quantification of basic active sites present on the surface of the CaO–MgO catalysts was carried out using the Hammett indicator method. The as-prepared mixed oxide samples were tested for propylene carbonate (PC) synthesis through the alcoholysis of urea with propylene glycol (PG). The effects of the catalyst composition, catalyst dose, reaction temperature, and contact time on the PC yield and selectivity were investigated. The maximum PC yield of 96%, with high PC selectivity of 99% and a urea conversion rate of 96%, was attained at 160 °C using CaO–MgO catalysts prepared using a Mg/Ca ratio of 1 and Na₂CO₃ as a precipitating agent. The best-performing catalysts also exhibited good reusability without any significant loss in PC selectivity. It is expected that the present study will provide useful information on the suitability of different precipitating agents with respect to the catalytic properties of the oxides of Ca and Mg and their application in the synthesis of organic carbonates. Full article

The aim of the research presented in this paper was to determine the effect of dihydroxy alcohols on the rheological properties of sodium carboxymethylcellulose (Na-CMC) solutions with different degrees of substitution and different average molecular masses. Rheological measurements were carried out with a rotational rheometer in continuous and oscillatory flows. Two dihydroxy alcohols were used in the study: butane-1,3-diol and propane-1,2-diol. The concentration of Na-CMC in the solutions was 1.6% and 2.2%, while the concentration of the dihydroxy alcohols ranged from 10% to 60%. The measurements show that the viscoelastic properties of Na-CMC solutions are strongly linked to the type of solvent used. The application of low-substituted high-molecular-mass Na-CMC makes it possible to obtain fluids with the properties of weak physical gels. On the other hand, the dissolution of Na-CMC with a high degree of substitution (>1) and low molecular mass in dihydroxy alcohol/water mixtures yields a viscoelastic fluid. Based on oscillatory measurements, increasing concentrations of polyhydroxy alcohols in Na-CMC solutions were found to induce an increase in the strength of the network structure. At the same concentrations of polyhydroxy alcohols in solutions containing butane-1,3-diol, a stronger network structure is formed compared to solutions containing propane-1,2-diol. The rheological measurement results presented in this paper may be useful in the formulation of drug carriers and cosmetics in which rheological properties are a significant factor. Full article

Xylose Isomerase (XI) is an intramolecular oxidoreductase enzyme and catalyzes the reversible conversion of ketoses and aldoses in addition to the bioconversion of ethanol from xylose in the production of bioethanol from hemicellulose. It has a broad range of industrial applications in the food and pharmaceutical sectors, particularly in the production of the sweetener high fructose corn syrup (HFCS). It is one of the most widely used industrial enzymes after protease. Taking this into consideration, four bacterial XI sources were selected based on growth temperature, i.e., psychrophile, mesophile, thermophile, and hyperthermophile, for analyzing Xylose Isomerase’s structure-function characteristics. It was found that thermophilic XI was structurally less stable than mesophilic and hyperthermophilic XI, whereas structural plasticity ran opposite towards mesophiles. The interaction of xylose isomerase (XI) with two ligands, namely Amino-2-Hydroxymethyl-Propane-1,3-Diol and (4R)-2-Methylpentane-2,4- Diol, was also studied. Mesophilic XI demonstrated better binding affinity with structurally stabilizing amino acids (Ala, Asp, Gly, Leu, and Arg). In comparison, Thermophilic XI showed nearly similar binding affinity with both Amino-2-Hydroxymethyl-Propane-1,3-Diol and (4R)-2-Methylpentane-2,4-Diol. The results of this investigation suggest that thermophilic XI, followed by mesophilic XI, would be the most appropriate for establishing process stability and sustainability in the food industry. Full article

Modeling ionizing radiation interaction with biological matter is a major scientific challenge, especially for protons that are nowadays widely used in cancer treatment. That presupposes a sound understanding of the mechanisms that take place from the early events of the induction of DNA damage. Herein, we present results of irradiation-induced complex DNA damage measurements using plasmid pBR322 along a typical Proton Treatment Plan at the MedAustron proton and carbon beam therapy facility (energy 137–198 MeV and Linear Energy Transfer (LET) range 1–9 keV/μm), by means of Agarose Gel Electrophoresis and DNA fragmentation using Atomic Force Microscopy (AFM). The induction rate Mbp⁻¹ Gy⁻¹ for each type of damage, single strand breaks (SSBs), double-strand breaks (DSBs), base lesions and non-DSB clusters was measured after irradiations in solutions with varying scavenging capacity containing 2-amino-2-(hydroxymethyl)propane-1,3-diol (Tris) and coumarin-3-carboxylic acid (C3CA) as scavengers. Our combined results reveal the determining role of LET and Reactive Oxygen Species (ROS) in DNA fragmentation. Furthermore, AFM used to measure apparent DNA lengths provided us with insights into the role of increasing LET in the induction of highly complex DNA damage. Full article