Search Results (26,701)

With the development of a quantum computer in the near future, classical public-key cryptography will face the challenge of being vulnerable to quantum algorithms, such as Shor’s algorithm. As communication technology advances rapidly, a great deal of personal information is being transmitted over the Internet. Based on our observation that the Kyber algorithm exhibits a significant number of idle cycles during execution when implemented following the conventional software procedure, this paper proposes a high-throughput scheduling for Kyber by parallelizing the SHA-3 function, the sampling algorithm, and the NTT computations to improve hardware utilization and reduce latency. We also introduce the 8-stage pipelined SHA-3 architecture and multi-mode polynomial arithmetic module to increase area efficiency. By also optimizing the hardware architecture of the various computational modules used by Kyber, according to the implementation result, an aggregate throughput of 877.192 kOPS in Kyber KEM can be achieved on TSMC 40 nm. In addition, our design not only achieves the highest throughput among existing studies but also improves the area and power efficiencies. Full article

Muscle–joint flexibility is defined as the ability of a muscle to stretch in a controlled manner, allowing a wide range of movement at the joints. While numerous methodologies exist for improving flexibility, few studies have investigated the role of athletes’ perceptual processes and awareness related to their own body and movement control during such training. In this pilot study, we explored how two different training protocols—static and dynamic stretching (control group, CON) and multi-joint resistance training (experimental group, EXP)—influence both flexibility and psychophysical awareness, understood as a multidimensional construct involving perceived flexibility improvements, self-assessed control over exercise execution, and cognitive-emotional responses such as engagement, motivation, and satisfaction during physical effort. The study involved 24 male amateur track-and-field athletes (mean age 23 ± 2.5 years), randomized into two equal groups. Over 12 weeks, both groups trained three times per week. Flexibility was assessed using the Sit and Reach Test at three time points (pre-, mid-, and post-intervention). A 2 × 3 mixed ANOVA revealed a significant group × time interaction (F = 20.17, p < 0.001), with the EXP group showing greater improvements than the CON group. In the EXP group, Sit and Reach scores increased from pre = 28.55 cm (SD = 4.91) to mid = 29.39 cm (SD = 4.67) and post = 29.48 cm (SD = 4.91), with a significant difference between pre and post (p = 0.01; d = 0.35). The CON group showed minimal changes, with scores of pre = 28.66 cm (SD = 4.92), mid = 28.76 cm (SD = 5.03), and post = 28.84 cm (SD = 5.10), and no significant difference between pre and post (p = 0.20; d = 0.04). Psychophysical awareness was assessed using a custom questionnaire structured on a 5-point Likert scale, with items addressing perception of flexibility, motor control, and exercise-related bodily sensations. The questionnaire showed excellent internal consistency (Cronbach’s α = 0.92). Within the EXP group, psychophysical awareness increased significantly (from 3.50 to 4.17; p = 0.01; d = 0.38), while no significant change occurred in the CON group (p = 0.16). Post-hoc power analysis confirmed small to moderate effect sizes within the EXP group, although between-group differences lacked sufficient statistical power. These results suggest that resistance training may improve flexibility and concurrently enhance athletes’ psychophysical self-awareness more effectively than traditional stretching. Such findings offer practical implications for coaches seeking to optimize flexibility training by integrating alternative methods that promote both physical and perceptual adaptations. Full article

Driven by carbon neutrality and peak carbon policies, hydrogen energy, due to its zero-emission and renewable properties, is increasingly being used in hydrogen fuel cell vehicles (H-FCVs). However, the high cost and limited durability of H-FCVs hinder large-scale deployment. Hydrogen internal combustion engine hybrid electric vehicles (H-HEVs) are emerging as a viable alternative. Research on the techno-economics of H-HEVs remains limited, particularly in systematic comparisons with H-FCVs. This paper provides a comprehensive comparison of H-FCVs and H-HEVs in terms of total cost of ownership (TCO) and hydrogen consumption while proposing a multi-objective powertrain parameter optimization model. First, a quantitative model evaluates TCO from vehicle purchase to disposal. Second, a global dynamic programming method optimizes hydrogen consumption by incorporating cumulative energy costs into the TCO model. Finally, a genetic algorithm co-optimizes key design parameters to minimize TCO. Results show that with a battery capacity of 20.5 Ah and an H-FC peak power of 55 kW, H-FCV can achieve optimal fuel economy and hydrogen consumption. However, even with advanced technology, their TCO remains higher than that of H-HEVs. H-FCVs can only become cost-competitive if the unit power price of the fuel cell system is less than 4.6 times that of the hydrogen engine system, assuming negligible fuel cell degradation. In the short term, H-HEVs should be prioritized. Their adoption can also support the long-term development of H-FCVs through a complementary relationship. Full article

Synthetic Aperture Radar (SAR) provides all-weather, all-time imaging capabilities, enabling reliable maritime ship detection under challenging weather and lighting conditions. However, most high-precision detection models rely on complex architectures and large-scale parameters, limiting their applicability to resource-constrained platforms such as satellite-based systems, where model size, computational load, and power consumption are tightly restricted. Thus, guided by the principles of lightweight design, robustness, and energy efficiency optimization, this study proposes a three-stage collaborative multi-level feature fusion framework to reduce model complexity without compromising detection performance. Firstly, the backbone network integrates depthwise separable convolutions and a Convolutional Block Attention Module (CBAM) to suppress background clutter and extract effective features. Building upon this, a cross-layer feature interaction mechanism is introduced via the Multi-Scale Coordinated Fusion (MSCF) and Bi-EMA Enhanced Fusion (Bi-EF) modules to strengthen joint spatial-channel perception. To further enhance the detection capability, Efficient Feature Learning (EFL) modules are embedded in the neck to improve feature representation. Experiments on the Synthetic Aperture Radar (SAR) Ship Detection Dataset (SSDD) show that this method, with only 1.6 M parameters, achieves a mean average precision (mAP) of 98.35% in complex scenarios, including inshore and offshore environments. It balances the difficult problem of being unable to simultaneously consider accuracy and hardware resource requirements in traditional methods, providing a new technical path for real-time SAR ship detection on satellite platforms. Full article

The large-scale integration of wind power, photovoltaic systems, and energy storage systems (ESSs) into power grids has increasingly influenced the transient stability of power systems due to their dynamic response characteristics. Considering the commercial confidentiality of core control parameters from equipment manufacturers, parameter identification has become a crucial approach for analyzing ESS dynamic behaviors during high-voltage ride-through (HVRT) and low-voltage ride-through (LVRT) and for optimizing control strategies. In this study, we present a multidimensional feature-integrated parameter identification framework for ESSs, combining a multi-scenario voltage disturbance testing environment built on a real-time laboratory platform with field-measured data and enhanced optimization algorithms. Focusing on the control characteristics of energy storage converters, a non-intrusive identification method for grid-connected control parameters is proposed based on dynamic trajectory feature extraction and a hybrid optimization algorithm that integrates an improved particle swarm optimization (PSO) algorithm with gradient-based coordination. The results demonstrate that the proposed approach effectively captures the dynamic coupling mechanisms of ESSs under dual-mode operation (charging and discharging) and voltage fluctuations. By relying on measured data for parameter inversion, the method circumvents the limitations posed by commercial confidentiality, providing a novel technical pathway to enhance the fault ride-through (FRT) performance of energy storage systems (ESSs). In addition, the developed simulation verification framework serves as a valuable tool for security analysis in power systems with high renewable energy penetration. Full article

Under the dual-carbon goals, with the rapid increase in the proportion of fluctuating power sources such as wind and solar energy, the regulatory capacity of traditional thermal power generation can no longer meet the demand for intra-day fluctuations. There is an urgent need to tap into the potential of flexible load-side regulatory resources. To this end, this paper proposes a low-carbon economic optimal dispatching strategy for virtual power plants (VPPs), considering the aggregation of diverse flexible and adjustable resources with the integration of wind and solar power. Firstly, the method establishes mathematical models by analyzing the dynamic response characteristics and flexibility regulation boundaries of adjustable resources such as photovoltaic (PV) systems, wind power, energy storage, charging piles, interruptible loads, and air conditioners. Subsequently, considering the aforementioned diverse adjustable resources and aggregating them into a VPP, a low-carbon economic optimal dispatching model for the VPP is constructed with the objective of minimizing the total system operating costs and carbon costs. To address the issue of slow convergence rates in solving high-dimensional state variable optimization problems with the traditional plant growth simulation algorithm, this paper proposes an improved plant growth simulation algorithm through elite selection strategies for growth points and multi-base point parallel optimization strategies. The improved algorithm is then utilized to solve the proposed low-carbon economic optimal dispatching model for the VPP, aggregating diverse adjustable resources. Simulations conducted on an actual VPP platform demonstrate that the proposed method can effectively coordinate diverse load-side adjustable resources and achieve economically low-carbon dispatching, providing theoretical support for the optimal aggregation of diverse flexible resources in new power systems. Full article

Metaheuristics are powerful optimization techniques that are well-suited for addressing complex combinatorial problems across diverse scientific and industrial domains. However, their application to computationally expensive problems remains challenging due to the high cost and significant number of fitness evaluations required during the search process. Surrogate modeling has recently emerged as an effective solution to reduce these computational demands by approximating the true, time-intensive fitness function. While surrogate-assisted metaheuristics have gained attention in recent years, their application to complex scheduling problems such as the Permutation Flowshop Scheduling Problem (PFSP) under learning, deterioration, and maintenance effects remains largely unexplored. To the best of our knowledge, this study is the first to investigate the integration of surrogate modeling within the artificial bee colony (ABC) framework specifically tailored to this problem context. We develop and evaluate two distinct strategies for integrating surrogate modeling into the optimization process, leveraging the ABC algorithm. The first strategy uses a Kriging model to dynamically guide the selection of the most effective search operator at each stage of the employed bee phase. The second strategy introduces three variants, each incorporating a Q-learning-based operator in the selection mechanism and a different evolution control mechanism, where the Kriging model is employed to approximate the fitness of generated offspring. Through extensive computational experiments and performance analysis, using Taillard’s well-known standard benchmarks, we assess solution quality, convergence, and the number of exact fitness evaluations, demonstrating that these approaches achieve competitive results. Full article

Introduction/Objective: Peritonitis remains a serious complication in patients undergoing automated peritoneal dialysis (APD), requiring prompt and effective antibiotic administration. This study evaluated whether delivering antibiotics directly through APD bags is as effective as administering them via an additional manual daytime exchange. Methods: We conducted a randomized, single-blind, non-inferiority clinical trial involving patients diagnosed with peritonitis. Participants were randomly assigned to receive Ceftazidime and Vancomycin, either via APD bags or through a combined approach of continuous ambulatory peritoneal dialysis (CAPD) plus APD. A total of 64 patients (32 per group) were enrolled, with comparable baseline demographic and clinical profiles, including laboratory markers of infection severity and dialysis history. Results: Peritonitis resolved in 90.6% of the patients treated via APD bags and in 81.3% of those receiving antibiotics through manual exchange plus APD. Although this difference did not reach statistical significance ($p$ = 0.281), the observed absolute difference of 9.3% was well within the predefined non-inferiority margin of 30%, supporting the clinical non-inferiority of the APD-only method. The mean time to resolution was similar between groups ($p$ = 0.593). Post hoc power analyses indicated limited statistical power (18.5% for the resolution rate and 9.2% for time to resolution), suggesting that modest differences may not have been detectable given the sample size. Nevertheless, the high resolution rates observed in both groups reflect valid and encouraging clinical outcomes. Conclusion: Antibiotic administration via APD bags demonstrated comparable clinical effectiveness to the combined manual exchange plus APD method for treating peritonitis. Given its operational simplicity and favorable results, the APD-only strategy may offer a pragmatic alternative in routine care. Further studies with larger sample sizes are recommended to confirm these findings and optimize treatment protocols. Trial registration: NCT04077996. Funding source: None to declare. Full article

Bipolar power supply can effectively reduce line losses and optimize power transmission. This paper proposes a low-power bipolar DC–DC converter with voltage self-balancing, which not only achieves bipolar output but also automatically balances the inter-pole voltage under load imbalance conditions without requiring additional voltage balancing control. This paper first elaborates on the derivation process of the proposed converter, then analyzes its working principles and performance characteristics. A 400 W experimental prototype is built to validate the correctness of the theoretical analysis and the voltage self-balancing capability. Finally, loss analysis and conclusions are presented. Full article

The goal of this study is to develop an efficient machine learning framework for designing high-hardness multi-metal nitride coatings, overcoming the limitations of traditional trial-and-error methods. The development of multicomponent metal nitride hard coatings via multi-arc ion plating remains a significant challenge due to the vast compositional search space. Although theoretical studies in macroscopic, mesoscopic, and microscopic domains exist, these often focus on idealized models and lack effective coupling across scales, leading to time-consuming and labor-intensive traditional methods. With advancements in materials genomics and data mining, machine learning has become a powerful tool in material discovery. In this work, we construct a compositional search space for multicomponent nitrides based on electronic configuration, valence electron count, electronegativity, and oxidation states of metal elements in unary nitrides. The search space is further constrained by FCC crystal structure and hardness theory. By incorporating a feature library with micro-, meso-, and macro-structural characteristics and using clustering analysis with theoretical intermediate variables, the model enriches dataset information and enhances predictive accuracy by reducing experimental errors. This model is successfully applied to design multicomponent metal nitride coatings using a literature-derived database of 233 entries. Experimental validation confirms the model’s predictions, and clustering is used to minimize experimental and data errors, yielding a strong agreement between predicted optimal molar ratios of metal elements and nitrogen and measured hardness performance. Of the 100 Vickers hardness (HV) predictions made by the model using input features like molar ratios of metal elements (e.g., Ti, Al, Cr, Zr) and atomic size mismatch, 82 exceeded the dataset’s maximum hardness, with the best sample achieving a prediction accuracy of 91.6% validated against experimental measurements. This approach offers a robust strategy for designing high-performance coatings with optimized hardness. Full article

Wireless Sensor Networks (WSNs) are specialised ad hoc networks composed of small, low-power, and often battery-operated sensor nodes with various sensors and wireless communication capabilities. These nodes collaborate to monitor and collect data from the physical environment, transmitting it to a central location or sink node for further processing and analysis. This study proposes two machine learning-based enhancements to the DEEC protocol for Wireless Sensor Networks (WSNs) by integrating the K-Nearest Neighbours (K-NN) and K-Means (K-M) machine learning (ML) algorithms. The Distributed Energy-Efficient Clustering with K-NN (DEEC-KNN) and with K-Means (DEEC-KM) approaches dynamically optimize cluster head selection to improve energy efficiency and network lifetime. These methods are validated through extensive simulations, demonstrating up to 110% improvement in packet delivery and significant gains in network stability compared with the original DEEC protocol. The adaptive clustering enabled by K-NN and K-Means is particularly effective for large-scale and dynamic WSN deployments where node failures and topology changes are frequent. These findings suggest that integrating ML with clustering protocols is a promising direction for future WSN design. Full article

In this study, the ultrasonic-assisted extraction of deep eutectic solvents (UADES) for tea polysaccharides was optimized, and their physicochemical properties and antioxidant activities were analyzed. The optimal DES comprised choline chloride (CC) and ethylene glycol (EG) in a molar ratio of 1:3, with a water content of 40%. The optimized condition was an extraction temperature of 61 °C, an ultrasonic power of 480 W, and an extraction time of 60 min. The UADES extraction rate of polysaccharides (ERP) was 15.89 ± 0.13%, significantly exceeding that of hot water (HW) extraction. The polysaccharide content in the UADES-extracted tea polysaccharides (UADESTPs) was comparable to that of hot-water-extracted tea polysaccharides (HWTPs) (75.47 ± 1.35% vs. 74.08 ± 2.51%); the UADESTPs contained more uronic acid (8.35 ± 0.26%) and less protein (12.91%) than HWTP. Most of the UADESTPs (88.87%) had molecular weights (Mw) below 1.80 × 10³ Da. The UADESTPs contained trehalose, glucuronic acid, galactose, xylose, and glucose, with molar ratios of 8:16:1:10. The free radical scavenging rate and total reducing power of the UADESTPs were markedly superior to those of the HWTPs. Moreover, the UADESTPs had a better alleviating effect on H₂O₂-induced oxidative injury in HepG2 cells. This study develops an eco-friendly and efficient extraction method for tea polysaccharides, offering new insights for the development of tea polysaccharides. Full article

Plant growth monitoring is a complex and challenging task, which depends on a variety of environmental variables, such as temperature, humidity, nutrient availability, and solar radiation. Advances in optical sensors have significantly enhanced data collection on plant growth. These developments enable the optimization of agricultural practices and crop management through the integration of artificial vision techniques. Despite advances in the application of these technologies, limitations and challenges persist. This review aims to analyze the current state-of-the-art methodologies for using artificial vision and optical sensors in plant growth assessment. The systematic review was conducted following the guidelines for Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA). Relevant studies were analyzed from the Scopus and Web of Science databases. The main findings indicate that data collection in agricultural environments is challenging. This is due to the variability of climatic conditions, the heterogeneity of crops, and the difficulty in obtaining accurately and homogeneously labeled datasets. Additionally, the integration of artificial vision models and advanced sensors would enable the assessment of plant responses to these environmental factors. The advantages and limitations were examined, as well as proposed research areas to further contribute to the improvement and expansion of these emerging technologies for plant growth assessment. Finally, a relevant research line focuses on evaluating AI-based models on low-power embedded platforms to develop accessible and efficient decision-making solutions in both agricultural and urban environments. This systematic review was registered in the Open Science Framework (OSF). Full article

This paper investigated the issues of unstable data collection links and low efficiency in IoT data collection for smart cities by combining active STAR-RIS with UAVs to enhance channel quality, achieving efficient data collection in complex environments. To this end, we propose an active simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS)-assisted UAV-enabled NOMA data collection system that jointly optimizes active STAR-RIS beamforming, SN power allocation, and UAV trajectory to maximize the system energy efficiency (EE) and the data complete collection rate (DCCR). We apply block coordinate ascent (BCA) to decompose the non-convex problem into three alternating subproblems: combined beamforming optimization of phase shift and amplification gain matrices, power allocation, and trajectory optimization, which are iteratively processed through successive convex approximation (SCA) and fractional programming (FP) methods, respectively. Simulation results demonstrate the proposed algorithm’s rapid convergence and significant advantages over conventional NOMA and OMA schemes in both throughput rate and DCCR. Full article

This paper calculates the expected cost of uncertainty in solar and wind energy using the uncertainty cost function (UCF), with a primary focus on computational processing time. The comparison of processing time for the uncertainty cost quantification (UCQ) is conducted through three methods: the Monte Carlo simulation method (MC), numerical integration method, and analytical method. The MC simulation relies on random simulations, while numerical integration employs established numerical formulations. These methods are commonly used for solving cost optimization problems in power systems. However, the analytical method is a less conventional approach. The analytical method for calculating uncertainty costs is closely related to the UCF, as it relies on a mathematical representation of the impact of uncertainty on costs, which is modeled through the UCF. A multi-objective approach was employed for scheduling an energy management system, that is to say, thermal–wind–solar energy systems, proposing a simplified method for modeling controllable renewable generation through UCF with an analytical method, instead of the complex probability distributions typically used in traditional methods. This simplification reduces complexity and computational processing time in optimization problems, offering greater accuracy in approximating real distributions and adaptability to various scenarios. The simulations performed yielded positive results in improving cost estimation and computational efficiency, making it a promising tool for enhancing economic distribution and grid operability. Full article