Search Results (29)

Chiral liquid chromatography (cLC) using chiral stationary phases (CSPs) has become a crucial technique for separating enantiomers. Understanding enantiomeric discrimination is essential for improving chromatographic conditions and elucidating chiral molecular recognition; the computational methods are extremely helpful for this. To assess the relevance of the association of these two approaches and to analyze the current trends, in this review, a systematic analysis of the scientific literature was performed, covering recently published works (from 2015 to January 2025) on enantioseparation by cLC using CSPs and computational studies. CSPs based on polysaccharides and Pirkle-type were the most described (accounting for 52% and 14% of the studies, respectively). Regarding the computational methods, molecular docking and molecular dynamics (MD) were the most reported (accounting for 50% and 25% of the studies, respectively). In the articles surveyed, a significant growth in research concerning both cLC enantioseparation and computational studies is evident, emphasizing the benefit of the synergy between these two approaches. Full article

The separation of three proton pump inhibitors (omeprazole, lansoprazole, and rabeprazole) as exemplified molecules containing chiral sulfoxide groups was investigated in polar organic liquid chromatographic mode on seven different polysaccharide stationary phases (Chiralcel OD and OJ; Chiralpak AD, AS, and IA; Lux Cellulose-2 and -4). Different alcohols, such as methanol, ethanol, 1-propanol, 2-propanol, and their combinations, were used as eluents. After method optimization, semi-preparative enantioseparation was successfully applied for the three proton pump inhibitors to collect the individual enantiomers. A detailed investigation was conducted into elution order reversal, thermodynamic parameters, the effect of eluent mixtures, and the hysteresis of retention time and selectivity. Using Chiralpak AS, containing the amylose tris[(S)-α-methylbenzylcarbamate] chiral selector, the separation of the investigated enantiomers was achieved in all four neat eluents, with methanol providing the best results. In many cases, a reversal of the enantiomer elution order was observed. In addition to chiral-selector-dependent reversal, eluent-dependent reversal was also observed. Notably, even replacing methanol with ethanol altered the enantiomer elution order. Both enthalpy- and entropy-controlled enantioseparation were also observed in several cases; however, temperature-dependent elution order reversal was not. The hysteresis of retention and selectivity was further investigated on amylose-type columns in methanol–2-propanol and methanol–ethanol eluent mixtures. The phenomenon was observed on all amylose columns regardless of the eluent mixtures employed. Hystereticity ratios were calculated and used to compare the hysteresis behaviors of different systems. Multivariate statistical analysis revealed that Chiralpak AS exhibited the most distinct enantioselective behavior among the tested columns, likely due to the absence of a direct connection between the carbamate moiety and the aromatic substituent. The present study aided in understanding the mechanisms leading to enantiomer recognition, which is crucial for developing new chiral stationary phases and chiral HPLC method development in general. Full article

The tetrahydroisoquinoline skeleton is a pharmacologically significant core structure containing chiral centers, making enantiomeric separation crucial due to the potentially distinct biological effects of each enantiomer. In this study, laudanosine (N-methyl-tetrahydropapaverine) and its three derivatives (6′-bromo-laudanosine, norlaudanosine, and N-propyl-norlaudanosine) were synthesized and used as model compounds to investigate chiral recognition mechanisms. Screening over twenty cyclodextrins (CyDs) as chiral selectors in capillary electrophoresis (CE), we found anionic CyDs to be the most effective, with sulfated-γ-CyD (S-γ-CyD) achieving a maximum R_s of 10.5 for laudanosine. Notably, octakis-(6-deoxy-6-(2-carboxyethyl)-thio)-γ-CyD (sugammadex, SGX), heptakis-(2,3-O-diacetyl-6-O-sulfo)-β-CD (HDAS), heptakis-(2,3-O-dimethyl-6-O-sulfo)-β-CD (HDMS), and octakis-(2,3-O-dimethyl-6-O-sulfo)-γ-CD (ODMS) provided excellent enantioseparation for all four analytes. Following HPLC screening on CyD-based and polysaccharide-based chiral stationary phases, semi-preparative HPLC methods using amylose and cellulose-based columns were optimized to isolate enantiomers. The purity of the isolated enantiomers was evaluated by HPLC, and their configurations were confirmed via circular dichroism spectroscopy. The isolated enantiomers allowed us to explore enantiomer migration order reversals in CE and enantiomer elution order reversal in HPLC. Further ¹H and 2D ROESY NMR experiments provided atomic-level insights into enantioselective complex formation, confirming enantiomer differentiation by SGX and elucidating the inclusion complex structure, where the ring C immersion into the CyD cavity is prevalent. Full article

Besides the well-known hallucinogenic ketamine, various novel ketamine derivatives are available on the illicit drug market, sold as designer drugs. Minor chemical changes to the parent compound aim to circumvent existing narcotic drug laws while mimicking the effects of the original substance. Ketamine and some of its derivatives possess a chiral centre and therefore exist as two enantiomers. While differences in the effects of S- and R-ketamine are well studied, this is not the case for ketamine derivatives. Therefore, the development and adaptation of suitable enantioseparation methods for those compounds is important to face the problems of the constantly changing drug market. In this study, different chiral separation methods for capillary electrophoresis (CE) and high-performance liquid chromatography (HPLC) were tested on 11 ketamine derivatives. Some of them were enantioseparated for the first time due to their novelty. All compounds were at least partially separated on both instruments. HPLC separations were conducted using four different polysaccharide-based chiral stationary phases. Furthermore, an optical rotation detector coupled to the HPLC enabled the determination of the enantiomer elution order. In CE analysis, enantioseparation was achieved using 2% (w/v) acetyl-β-cyclodextrin or carboxymethyl- β-cyclodextrin in 10 mM di-sodium hydrogen phosphate as the background electrolyte in capillary electrophoresis. Full article

Enantioseparation of nineteen liquid crystalline racemic mixtures obtained based on (R,S)-2-octanol was studied in reversed-phase mode on an amylose tris(3-chloro-5-methylphenylcarbamate) (ReproSil Chiral-MIG) and a cellulose tris(3,5-dichlorophenylcarbamate) (ReproSil Chiral-MIC). These polysaccharide-based chiral stationary phase (CSP) columns for High-Performance Liquid Chromatography (HPLC) were highly effective in recognizing isomers of minor structural differences. The mobile phase (MP), which consists of acetonitrile (ACN)/water (H₂O) at different volume ratios, was used. The mobile phases were pumped at a flow rate of 0.3, 0.5, or 1 mL·min⁻¹ with a column temperature of 25 °C, using a UV detector at 254 nm. The order of the elution was also determined. The chromatographic parameters, such as resolution (R_s), selectivity (α), and the number of theoretical plates, i.e., column efficiency (N), were determined. The polysaccharide-based CSP columns have unique advantages in separation technology, and this study has shown the potential usefulness of the CSP columns in separating liquid crystalline racemic mixtures belonging to the same homologous series. Full article

Atorvastatin (ATV) is a well-established lipid-lowering agent. ATV has two stereogenic centers, and of the four possible stereoisomers, only the (3R,5R) form is used therapeutically. The European Pharmacopoeia (EP) monograph 2022 for ATV calcium salt describes a normal-phase high-performance liquid chromatography (HPLC) method for the determination of enantiomeric purity in both drug substance and working standard samples, based on a 150 mm × 4.6 mm Chiralpak AD-H column. The main problems with this method are the very long analysis time and the high solvent consumption. Here, an alternative chromatographic protocol was developed using the Chiralpak AD-3 column (250 mm × 4.6 mm) packed with 3 μm silica particles instead of the 5 μm silica particles of the Chiralpak AD-H chiral stationary phase and characterized by the same polysaccharide selector, amylose-tris(3,5-dimethylphenylcarbamate). Using a mobile phase consisting of a mixture of n-hexane-ethanol-formic acid 90:10:0.1 (v/v/v) as the mobile phase and setting the flow rate and column temperature to 1.0 mL min⁻¹ and 35 °C, respectively, a simultaneous stereo-selective separation was achieved within 35 min without observing any overlap between the enantiomeric impurity peak and peaks related to other ATV impurities. Compared to HPLC EP conditions, the analysis time to elute all the potentially related substances was faster and significantly less mobile phase volume was required. The linearity of the method has been demonstrated in the range of 4.4 μg mL⁻¹ to 1000 μg mL⁻¹ (R² > 0.999). At a concentration of 4.4 μg mL⁻¹, which is 0.075% of the test solution (5.8 mg mL⁻¹, as ATV free acid), the signal-to-noise ratio was found to be 20. Full article

In this paper, the preparation of three new polysaccharide-type chiral stationary phases (CSPs) based on levan carbamates (3,5-dimethylphenyl, 4-methylphenyl, and 1-naphthyl) is described. The enantioseparation of (±)-trans-β-lactam ureas 1a–h was investigated by high-performance liquid chromatography (HPLC) on six different chiral columns (Chiralpak AD-3, Chiralcel OD-3, Chirallica PST-7, Chirallica PST-8, Chirallica PST-9, and Chirallica PST-10) in the polar organic mode, using pure methanol (MeOH), ethanol (EtOH), and acetonitrile (ACN). Apart from the Chirallica PST-9 column (based on levan tris(1-naphthylcarbamate), the columns exhibited a satisfactory chiral recognition ability for the tested trans-β-lactam ureas 1a–h. Full article

This comprehensive review explores the utilization of chiral stationary phases (CSPs) in the context of single-column simultaneous chiral–achiral high-performance liquid chromatography (HPLC) separation methods. While CSPs have traditionally been pivotal for enantioselective drug analysis, contemporary CSPs often exhibit notable chemoselective properties. Consequently, there is a discernible trend towards the development of methodologies that enable simultaneous enantio- and chemoselective separations utilizing a single CSP-based chromatographic column. This review provides an exhaustive overview of reported HPLC methods in this domain, with a focus on four major CSP types: cyclodextrin-, glycopeptide antibiotic-, protein-, and polysaccharide-based CSPs. This article delves into the diverse applications of CSPs, encompassing various chromatographic modes such as normal phase (NP), reverse phase (RP), and polar organic (PO). This review critically discusses method development, emphasizing the additional chemoselective separation mechanisms of CSPs. It also explores possibilities for method optimization and development, concluding with future perspectives on this evolving field. Despite the inherent challenges in understanding the retention mechanisms involved in chemoselective separations, this review highlights promising trends and anticipates a growing number of simultaneous enantio- and chemoselective methods in pharmaceutical analyses, pharmacokinetic studies, and environmental sample determinations. Full article

A reversed-phase high-performance liquid chromatographic (HPLC) method was developed for the simultaneous determination of the potential impurities of dexketoprofen, including the distomer R-ketoprofen. After screening the separation capability of four polysaccharide columns (Lux Amylose-1, Lux Amylose-2, Lux Cellulose-1 and Lux Cellulose-2) in polar organic and in reversed-phase modes, appropriate enantioseparation was observed only on the Lux Amylose-2 column in an acidified acetonitrile/water mixture. A detailed investigation of the mobile phase composition and temperature for enantio- and chemoselectivity showed many unexpected observations. It was observed that both the resolution and the enantiomer elution order can be fine-tuned by varying the temperature and mobile phase composition. Moreover, hysteresis of the retention times and enantioselectivity was also observed in reversed-phase mode using methanol/water mixtures on amylose-type columns. This could indicate that the three-dimensional structure of the amylose column can change by transitioning from a polar organic to a reversed-phase mode, which affects the enantioseparation process. Temperature-dependent enantiomer elution order and rare enthalpic/entropic controlled enantioseparation in the operative temperature range were also observed in reversed-phase mode. To find the best methodological conditions for the determination of dexketoprofen impurities, a full factorial optimization design was performed. Using the optimized parameters (Lux Amylose-2 column with water/acetonitrile/acetic acid 50/50/0.1 (v/v/v) at a 1 mL/min flow rate at 20 °C), baseline separations were achieved between all compounds within 15 min. Our newly developed HPLC method was validated according to the current guidelines, and its application was tested on commercially available pharmaceutical formulations. According to the authors’ knowledge, this is the first study to report hysteretic behavior on polysaccharide columns in reversed-phase mode. Full article

A series of nine racemic trans-β-lactam ureas were analyzed for enantiomer separation by high-performance liquid chromatography (HPLC) and supercritical fluid chromatography (SFC). The separations were performed on three immobilized polysaccharide-based chiral analytical columns (CHIRAL ART Amylose-SA, CHIRAL ART Cellulose-SB and CHIRAL ART Cellulose-SC). In HPLC mode, a normal-phase consisting of n-hexane/2-PrOH (90/10, v/v), a polar organic mobile phase consisting of 100% MeOH or 100% EtOH, and a non-standard mobile phase consisting of 100% dimethyl carbonate (DMC) were investigated. In SFC mode, the mobile phases CO₂/alcohol (80/20, v/v) and CO₂/DMC/alcohol (MeOH or EtOH; 70/24/6, v/v/v or 60/32/8, v/v/v) were investigated. The best achieved enantioseparation of trans-β-lactam ureas was obtained with an Amylose-SA column. We have shown that the green solvent dimethyl carbonate (DMC) can be efficiently used as a mobile phase in HPLC mode as well as in SFC mode along with the addition of polar organic modifiers (MeOH or EtOH). Full article

Mechanistic modeling is useful for predicting and modulating selectivity even in early chromatographic method development. This approach is also in accordance with current analytical quality using design principles and is highly welcomed by the authorities. The aim of this study was to investigate the separation behavior of two different types of chiral stationary phases (CSPs) for the separation of ezetimibe and its related substances using the mechanistic retention modeling approach offered by the Drylab software (version 4.5) package. Based on the obtained results, both CSPs presented with chemoselectivity towards the impurities of ezetimibe. The cyclodextrin-based CSP displayed a higher separation capacity and was able to separate seven related substances from the active pharmaceutical ingredient, while the cellulose-based column enabled the baseline resolution of six impurities from ezetimibe. Generally, the accuracy of predicted retention times was lower for the polysaccharide CSP, which could indicate the presence of additional secondary interactions between the analytes and the CSP. It was also demonstrated that the combination of mechanistic modeling and an experimental design approach can be applied to method development on CSPs in reverse-phase mode. The applicability of the methods was tested on spiked artificial placebo samples, while intraday and long-term (2 years) method repeatability was also challenged through comparing the obtained retention times and resolution values. The results indicated the excellent robustness of the selected setpoints. Overall, our findings indicate that the chiral columns could offer orthogonal selectivity to traditional reverse-phase columns for the separation of structurally similar compounds. Full article

Until recently, chirality has not been a major focus in the study of cannabinoids, as most cannabinoids of interest, such as cannabidiol and tetrahydrocannabinol, exist as a single isomer from natural sources. However, this is changing as more cannabinoids are identified, and compounds such as cannabichromene and cannabicyclol are emerging as potential investigatory candidates for varying indications. Because these molecules are chiral, the separation and study of the individual enantiomers’ biological and physiological effects should therefore be of interest. The purpose of this study was to identify analytical separation conditions and then adapt those conditions to preparative separation. This was accomplished with a column-screening approach on Daicel’s immobilized polysaccharide chiral stationary phases using non-traditional mobile phases, which included dichloromethane, ethyl acetate, and methyl tert-butyl ether under high-performance liquid chromatography conditions. CHIRALPAK^® IK was found to separate all four compounds well with mobile phases containing hexane-dichloromethane (with or without an acidic additive). From these methods, the separation productivities were calculated to better visualize the separation scalability, which shows that the kilogram-scale separations of each are feasible. Full article

The enantiomeric separation of antifungal compounds is an arduous task in pharmaceutical and biomedical fields due to the different properties that each diastereoisomer presents. The enantioseparation of a group of fungicides (sulconazole, bifonazole, triadimefon and triadimenol) using supercritical fluid chromatography was achieved in this work. For this goal, four different chiral columns based on polysaccharide derivatives, as well as the effect of different chromatographic parameters such as temperature, type and percentage of organic modifier (methanol, ethanol and isopropanol), were thoroughly investigated. The inversion of the elution order of enantiomers as a result of a change in the stationary phase or organic modifier was also evaluated by employing a circular dichroism detector. The best separation conditions, in terms of the enantioresolution and analysis time, were obtained with the Lux^® Cellulose-2 column using isopropanol as the organic modifier. Full article

Enantioseparation of the newly synthesized series of novel quinoline-2(1H)-one epoxide structures rac-6a–c and rac-8a–c, named marinoepoxides, is described. Marinoepoxide rac-6a, the key intermediate in the total synthesis of natural products marinoaziridines A and B, as well as their structural analogues, was synthesized by addition of the achiral ylide generated in situ from the sulfonium salt 5 or 7, to the carbon-oxygen double bond of the corresponding quinoline-2(1H)-one-4-carbaldehyde 4a–c in good yield. Separation of enantiomers of (±)-2,3,3-trisubstituted marinoepoxides rac-6a–c and (±)-trans-2,3-disubstituted marinoepoxides rac-8a–c was studied using two immobilized polysaccharide type chiral stationary phases (CSPs); tris-(3,5-dichlorophenylcarbamoyl)cellulose stationary phase (CHIRAL ART Cellulose-SC) and tris-(3,5-dimethylphenylcarbamoyl)amylose stationary phase (CHIRAL ART Amylose-SA). Enantioseparation conditions were explored by high-performance liquid chromatography (HPLC) using dimethyl carbonate/alcohol mixtures and n-hexane/ethanol (80/20, v/v) as mobile phase, and by supercritical fluid chromatography (SFC) using CO₂/alcohol mixtures as mobile phase. In all examined racemates, enantioseparation was successfully achieved, but its efficiency largely depended on the structure of chiral selector and type/composition of the mobile phase. Full article

The enantioseparation of syn- and anti-3,5-disubstituted hydantoins 5a–i was investigated on three immobilized polysaccharide-based columns (CHIRAL ART Amylose-SA, CHIRAL ART Cellulose-SB, CHIRAL ART Cellulose-SC) by high performance liquid chromatography (HPLC) using n-hexane/2-PrOH (90/10, v/v) or 100% dimethyl carbonate (DMC) as mobile phases, respectively, and by supercritical fluid chromatography (SFC) using CO₂/alcohol (MeOH, EtOH, 2-PrOH; 80/20, v/v) as a mobile phase. The chromatographic parameters, such as separation and resolution factors, have indicated that Amylose-SA is more suitable for enantioseparation of the most analyzed syn- and anti-3,5-disubstituted hydantoins than Celullose-SB and Cellulose-SC in both HPLC and SFC modalities. All three tested columns showed better enantiorecognition ability toward anti-hydantoins compared to syn-hydantoins, both in HPLC and SFC modes. We have demonstrated that environmentally friendly solvent DMC can be efficiently used as the mobile phase in HPLC mode for enantioseparation of hydantoins on the immobilized polysaccharide-based chiral stationary phases. Full article