Search Results (179)

Plastic pollution has emerged as a major environmental concern due to its persistence and widespread accumulation in terrestrial ecosystems. The extensive utilization of plastics across a diverse range of products, from packaging to healthcare, construction, and transportation, poses a significant risk due to their enduring and non-biodegradable nature. Micro/nanoplastics (MNPs) derived either from the fragmentation of larger plastics or direct release are increasingly detected in agricultural soils, where they interact with plant systems. In addition, chronic exposure of MNPs alters soil structure, microbial diversity, and nutrient cycling, further impacting agroecosystem functioning. Plants have been shown to absorb MNPs mostly from contaminated soil and irrigated water through their root systems, allowing their subsequent translocation to aerial tissues. MNPs can enter plants through the aquaporins, apoplast pathways, crack entry modes, and leaf stomata, disrupting nutrient uptake, photosynthesis, and growth processes, ultimately affecting crop productivity and quality, while their accumulation in edible tissues raises concerns regarding food safety and trophic transfer. To address these challenges, it is crucial to have standard detection methods for identifying MNPs and to bridge the gap for further mitigation. This review further discussed effective mitigation strategies, including nanomaterial and phytohormone-based interventions under increasing plastic contamination. Full article

The extensive use of plastics in everyday life has exerted a significant influence on the environment, with the release of micro- and nanoplastics posing even greater ecological threats. Plastic contamination, particularly in these smaller forms, has emerged as a pressing environmental concern due to its persistence, bioaccumulation, and potential hazards. Traditional treatment systems are generally ineffective at removing such micro- and nano-scale complex pollutants. Recently, micro- and nanofiber-based materials have emerged as promising candidates due to their large surface area, porous structure, and adjustable functionality, enabling efficient adsorption, filtration, and photocatalytic degradation. The term micro/nanofibers in this study encompasses both electrospun nanofibrous membranes and nanofiber-based functional layers or additives incorporated into pre-existing membrane structures for performance enhancement. The incorporation of photocatalysts enables these materials to promote photocatalytic oxidation, degrading plastics into smaller, less toxic compounds. This paper outlines recent progress in developing micro- and nanofiber systems for environmental remediation, highlighting their design approaches, removal mechanisms, and multifunctional capabilities. Ultimately, the discussion explores emerging directions, existing limitations, and future opportunities, highlighting how these advanced materials can contribute to sustainable and efficient pollution control strategies. Full article

Microplastic (MP) pollution in bottled and tap water poses escalating environmental and public health challenges due to MPs’ capacity to act as vectors for toxicants and pathogens. This study constitutes the first comprehensive evaluation of MPs in drinking water from Madeira Island, integrating detailed chemical and morphological characterisations alongside human exposure estimations. A total of 22 samples, comprising 10 bottled (four mineral, six flavoured) and 12 tap waters, were analysed via stereomicroscopy and micro-Fourier transform infrared (µ-FTIR) spectroscopy. Of the 428 particles detected, 65 were confirmed MPs, 223 were non-plastics, and 140 were indeterminate. Bottled waters were predominantly contaminated by polyethylene terephthalate (PET), polypropylene (PP), and polyethylene (PE), whereas tap waters exhibited a notable presence of PE, PP, polyester, and polyamide (PA). MPs predominantly measured under 400 µm and were transparent; fragments were the main form in bottled water, contrasting with fibres dominating tap waters. Concentrations ranged from 0.5 to 6 MPs/L, with flavoured waters exhibiting the highest average levels (2.00 ± 1.83 MPs/L), followed by tap (1.30 ± 0.80 MPs/L) and mineral waters (0.59 ± 0.37 MPs/L). Estimated daily intake (EDI) spanned 0.01–0.19 MPs/kg/day for adults and 0.05–0.68 MPs/kg/day for children, the latter exhibiting a 3.6-fold greater exposure. Although concentrations were lower than those in many global reports, the ubiquity of MPs underscores the critical need for standardised monitoring protocols, enhanced production standards, and rigorous risk assessments addressing chronic low-level human exposure, especially in insular environments. Full article

The plastic pieces of synthetic polymers, which were previously regarded as primary pollutants of the environment, are increasingly being discovered as internal pollutants of the human body. This review provides a comprehensive overview of the available evidence on human exposure, tissue distribution, and associated biological effects of micro- and nanoplastics. Ingesting contaminated food and water is the major exposure pathway, with inhalation and dermal contact being secondary routes. Various organ systems have been identified as containing polymer particles through the use of advanced analytical methods, including blood, liver, lungs, placenta, breast milk, and brain tissue. Experimental animal studies suggest associations with tissue injury, metabolic illness, and neurotoxicity. Polyethylene, polypropylene, polystyrene, and polyethylene terephthalate are the most frequently found polymers in human samples. New clinical findings indicate potential health implications, though current human evidence remains largely associative rather than causal: a cardiovascular study observed more than a two-fold rise in mortality among patients with polymer-containing arterial plaques, and recent evidence demonstrates over-accumulation of polymers in brain tissue, raising questions about neuroinflammatory processes. Detection technologies have advanced substantially, with deep learning-based polymer classification achieving 95–99% accuracy and ultrasensitive electrochemical and surface plasmon resonance biosensors reaching detection limits approaching 10⁻¹¹ M. Despite these advances, critical issues remain, including lack of standardized analytical procedures, absence of chronic exposure models for humans, and insufficient longitudinal epidemiological data. To address these gaps, physiologically relevant experimental systems including organoids and organ-on-chip platforms will be required, in addition to well-designed prospective cohort studies. Full article

Soil biofilms are structured, dynamic microbial consortia embedded within extracellular polymeric substances that regulate microscale physicochemical heterogeneity and drive biogeochemical transformations in soils. Despite increasing interest in biofilm-mediated remediation, current reviews have largely examined microbial ecology, engineered biofilm functions, and predictive modelling independently, limiting systems-level understanding of pollutant fate in complex soils. This review, therefore, proposes a revised conceptual framework integrating biofilm ecology, synthetic biology, and AI-driven predictive modelling to improve mechanistic and predictive understanding of emerging pollutant detoxification. Emerging pollutants, including pharmaceuticals, pesticides, per- and polyfluoroalkyl substances, micro- and nanoplastics, and heavy metals, exhibit persistence, bioaccumulation, and mixture-dependent effects that challenge conventional remediation strategies. Biofilm matrices function as reactive interfaces facilitating adsorption, sequestration, and enzymatic transformation, while steep redox and nutrient gradients support metabolically diverse processes such as cometabolism, syntrophic degradation, and biomineralisation. Increasing evidence indicates that quorum sensing, horizontal gene transfer, and low-abundance microbial taxa contribute significantly to adaptive responses and functional plasticity within biofilms. Advances in high-resolution imaging, spatial multi-omics, and microfluidic platforms have resolved previously inaccessible biofilm architectures and processes; however, integration with machine learning and process-based modelling remains limited, restricting field-scale prediction of pollutant behaviour and remediation outcomes. Synthetic biology enables targeted optimisation of biofilm functions, whereas AI-driven models enhance prediction of contaminant transport, transformation, and detoxification. Soil biofilms function both as sinks and catalytic hotspots, and resolving this duality through a predictive, systems-level framework represents a major advance beyond existing descriptive reviews. Full article

Micro(nano)plastics (MNPs) represent a pervasive and escalating threat to global ecosystems and human health. This review provides a critical synthesis of MNPs’ exposure risks across marine, atmospheric, and terrestrial compartments, with a distinct emphasis on identifying cross-media linkages and methodological inconsistencies that limit current risk assessments. Within marine environments, pollution hazard indices reveal significant spatial heterogeneity, yet their utility is constrained by the absence of toxicity weighting and particle characteristic integration. Atmospheric exposure profiles show variable risks, and the MNPs’ concentration in indoor air (up to 15.8 particles/m³) is significantly higher than in outdoor environments, posing a greater inhalation risk to infants and children who spend more time indoors. A marked increase in MNPs’ concentrations within agricultural soils is identified, where the MNP content in mulched soils (average: 570.2 particles/kg) is more than twice that of non-mulched soils (259.6 particles/kg). Critically, studies have now detected MNPs within human tissues, including the blood, intestines, liver, kidneys, tonsils, and brain, highlighting an urgent need to elucidate their multi-organ toxicity mechanisms, with a novel synthesis of gut–brain axis disruption and transgenerational effects. By integrating exposure dynamics with mechanistic toxicity data, this review advances a cross-system framework that identifies priority research directions, namely standardized detection methodologies, combined pollutant toxicity, and cross-system toxicity mechanisms, which are essential for informing mitigation strategies amid this escalating public health crisis. Full article

Microplastic (MP) pollution in agricultural settings is an emerging field of study, with interest focusing on potential resource contamination of soil and water due to the use of plastic materials in farming practices. The Mississippi Delta, a highly agricultural region, is prone to both natural and intentional flooding, potentially exacerbating this issue. This exploratory study investigated MP (>30 µm) concentrations, sizes, and polymer compositions in floodwater, irrigation water, and surface runoff from soybean fields across two counties in the Mississippi Delta using micro-Fourier transform infrared spectroscopy (µ-FTIR). Mean ± SE concentrations (MPs/L) were 72 ± 66 in floodwater (n = 18), 169 ± 121 in source (irrigation pond) water (n = 4), and 30 ± 37 in runoff (n = 3) in Sunflower County, MS. In Coahoma County, MS, mean ± SE runoff concentration was 88 ± 76 MPs/L (n = 24). Mean concentrations were elevated as compared to other MP studies in agricultural environments. The most common polymers present were polyethylene terephthalate (PET), polyethylene (PE), polyethylene-ethyl vinyl acetate (PE/EVA), and thermoplastic elastomers (TPEs), which are commonly used in the manufacturing of agricultural materials. MPs from the smallest size fraction measured (30–100 µm) were the most common in all floodwater samples, ranging from 75.5–91% abundance. Using Attenuated Total Reflectance (ATR)-FTIR, larger plastic litter was identified as mostly PE and PET, which is consistent with polymer distributions in floodwater samples. Overall, MPs were prevalent in both floodwater and runoff, with relatively consistent concentrations and polymer compositions across samples. However, further research is needed to fully elucidate their fate and potential impacts on agricultural systems. Full article

Cognition in older adults may be influenced by environmental factors; however, the pathways linking environmental exposures and cognition remain unclear. The aim of this narrative review is to synthesize evidence on the association between the environment and cognition in older adults, integrating biological, environmental, and behavioral elements. Systematic reviews and original studies addressing this topic were identified in Web of Science, PubMed, and Scopus. The primary neural processes associated with maintaining cognition during aging are neuronal plasticity and compensatory scaffolding. Participation in intellectually stimulating activities, physical exercise, and a healthy diet; mitigation of chronic stress; reduction in the severity of depressive symptoms; and buffering against the adverse effects of air pollution are proposed as plausible pathways that may mediate the relationship between neural processes and the environment. In this context, environmental factors that affect cognition can be classified at three levels: (i) micro-level (family and home): social interaction with family members and indoor pollution; (ii) meso-level (community and services): social interaction, land-use diversity, transportation systems, environmental design, and urban green spaces; and (iii) macro-level (society in general and public policies): social representations of old age and aging (positive aging vs. ageism) and public policies aimed at improving pathways related to cognitive maintenance. Overall, the environment may influence cognition in older adults; however, the available studies show methodological and conceptual heterogeneity, inconsistent findings, and important gaps in knowledge. Full article

Introduction: It is accepted that nano- and micro-plastic (NMP) pollutants threaten ecosystems and human health by their bioaccumulation but, interestingly, their toxicity is shape-dependent. However, a clear definition of irregular NMPs, as the dominant shape in environmental and biological samples, is currently lacking when compared to spherical and fibrous NMPs. Objectives: This study quantifies morphometric descriptors in order to develop a standardized definition for irregular NMPs. Methods: Hyperspectral images of 34 spherical, 50 fibrous, and 45 irregular NMPs were collected from the literature. All shape-related features reported previously were analyzed using a machine learning model. Using five-fold cross-validation, a decision tree-based ensemble classifier with fixed parameters and Gini coefficient was established to screen key morphometric descriptors and their optimal interval ranges. The model was independently validated, enabling the accurate distinction of irregular NMPs from spherical and fibrous NMPs. Results: Three morphometric descriptors, including circularity, roundness, and perimeter-to-area ratio, were identified using five-fold cross-validation as optimal indicators for NMP shape classification. Optimal interval ranges for irregular NMPs were as follows: circularity (0.388 ± 0.004–0.768 ± 0.004), roundness (0.248 ± 0.01–0.752 ± 0.06) and perimeter-to-area ratio (>11.608 ± 1.39). This approach generated a 96.0% macro-averaged accuracy across these NMPs, with 100% precision and 89.0% recall. Conclusions: Irregular NMPs may be characterized using three morphometric descriptors, such as circularity, roundness, and perimeter-to-area ratio. The three-descriptor combination has highly accurate discrimination from spherical and fibrous NMPs. Full article

The extensive use of agrochemicals and plastic materials has led to the accumulation of persistent pollutants in agricultural soils, raising concerns about agroecosystems through posing potential risks to soil and environmental health. This review synthesizes recent knowledge on these pollutant sources, including their distribution, fate, transformation pathways, and detection methods, as well as their impacts on soil physicochemical properties, microbial populations, plants, and ecosystems. Existing findings indicate that agrochemicals and micro-nano plastics (MPs-NPs) can significantly impede the stability of soil aggregation, increase soil water holding capacity (WHC) and porosity, reduce bulk density and infiltration, alter soil structure, and affect soil pH, cation exchange capacity (CEC), electrical conductivity (EC), and nutrient retention capacity. Moreover, exposure to these pollutants alters soil microbial communities, enzymatic activity, nitrification and denitrification processes, and arbuscular mycorrhizal fungi (AMF), thereby affecting carbon pools and fluxes as well as nutrient cycling. However, the magnitude and direction of these effects are strongly influenced by soil type, pollutant class, concentration, and physicochemical properties. Furthermore, terrestrial and aquatic ecosystems are negatively affected due to the presence of such persistent pollutants by impairing their physiological processes. Despite these findings, mechanistic understanding remains limited due to a lack of long-term field investigation and proper detection methods, particularly regarding NPs. A comprehensive understanding of agrochemical and MP-NP interactions is essential for developing sustainable soil management strategies and agroecosystems. Future studies should address the development of standardized NP detection methods and the conducting of long-term field studies to elucidate MP-NP and agrochemical interactions, soil impacts, and crop uptake mechanisms. Full article

In response to the plastic pollution crisis, bioplastics emerged as a sustainable alternative. However, low degradation rate and abiotic decomposition generate micro- and nanoplastics. These particles enter the food chain, establishing oral intake as a key route of human exposure. This review gathered studies on the biotransformation of bioplastics in the gastrointestinal tract and on their toxicity in human cells and murine models. Most studies focused on polylactic acid particles due to widespread use in food packaging. Under simulated gastrointestinal conditions in vitro, particles were modulated, resulting in cavity and pore formation, fragmentation, lipase competition, protein corona formation, and alterations in the gut microbiota (including Selenomonadaceae, Bifidobacterium, and Prevotellaceae). Also, particle breakdown increases surface area, enhancing interactions with biomolecules and causing higher in vitro and in vivo toxicity. Indeed, pro-inflammatory cytokine secretion, oxidative stress induction, and redox imbalance were found in both models. In mice, alterations in gut microbiota involving Bacillales indirectly mediated hepatotoxicity, leading to uric acid and triglyceride accumulation. Furthermore, microbiota adaptation over time was suggested with an increase in microorganisms and the potential conversion of L-lactic into harmful D-lactic acid. Despite limited studies, this review highlighted that ingested bioplastic-derived micro- and nanoplastics can lead to toxic effects. Full article

Micro- and nano-plastic pollution caused by the mismanagement of plastics waste is a significant problem worldwide, causing severe impacts in aquatic and terrestrial environments. The purpose of this study was to evaluate the adsorption capacity of a thermally stable and superhydrophobic bio-substrate to remove microplastic particles (MPPs) from aqueous systems. In this work, the adsorption efficiency of cattail fluff towards MPPs from pristine PP, PVC, PA6, LDPE, HDPE, and their blend was evaluated. The effect of temperature (30 °C, 40 °C, and 50 °C) and two binding environments (distilled water and industrial wastewater) on adsorption was determined. Non-linear regressions of seven adsorption isotherm models including Langmuir, Freundlich, Temkin, Dubinin–Radushkevich (D–R), Redlich–Peterson (R–P), Toth, and Sips were applied to fit the experimental data. Error function analysis confirmed that the D–R adsorption isotherm model offers the best fit of the experimental data. The results show that the bio-substrate is very effective in adsorbing MPPs from aqueous systems with adsorption capacities of q_e = 3597 mg/g and q_e = 2807 mg/g in distilled water and synthetic industrial water, respectively. The composition of the MPPs determines the effect of temperature and binding environment on the adsorption performance of the bio-substrate. Physisorption dynamics for the MPP/bio-substrate system are also provided and discussed. Overall, the hydrophobic bio-substrate is highly effective in removing MPPs from aqueous systems, with the added advantages of low cost, sustainability, and scalability for practical applications. Full article

Microplastics (MPs) and nanoplastics (NPs) have emerged as pervasive contaminants across diverse environments—including soil, water, and the atmosphere—posing substantial risks to resident organisms. Concurrently, alien plant invasion represents a significant driver of environmental change, introducing considerable ecological risks to terrestrial ecosystems. Synthesizing evidence from 26 original research articles, this review examines the bidirectional interactions between micro(nano)plastics (MNPs) and terrestrial invasive plants. A growing body of evidence indicates that MNPs alter the growth and performance of both invasive and native plants. In most documented cases, MNPs appear to enhance the competitive ability of invasive plants, thereby elevating their invasion potential. However, counterexamples exist wherein MNPs strengthen the competitiveness of native plants, consequently mitigating invasion risk. These divergent outcomes are likely attributable to a suite of influencing factors, notably the characteristics of the MNPs (e.g., type, size, concentration), the specific invasive and native plant species involved, and variations in experimental conditions. Key mechanistic pathways involve MNPs-induced disturbances in soil microecology—particularly nutrient dynamics and rhizosphere microbiomes—and allelopathic interactions. Conversely, invasive plants may adsorb/absorb MNPs and subsequently modify their environmental fate and behaviors (e.g., degradation, transport). Finally, we delineate critical knowledge gaps and propose prioritized directions for future research. This review advances our understanding of the ecological risks associated with plant invasions in an era of pervasive MNP pollution and offers a scientific foundation for developing informed management strategies. Full article

The rapid growth of synthetic textile production has intensified the release of micro- and nanoplastics (MPs/NPs) into aquatic environments, primarily through industrial effluents and domestic laundering. Textile-derived microplastics, especially polyester fibers and polymeric coating fragments, constitute a significant fraction of plastic contamination in wastewater systems. Although wastewater treatment plants (WWTPs) can remove a large proportion of MPs, substantial quantities accumulate in sewage sludge, raising concerns about long-term environmental persistence and secondary release pathways. This review critically examines the sources, classification, and release mechanisms of textile-based micro- and nanoplastics, including fibrous debris and coating-derived fragments. Then it focuses on current identification and removal technologies, such as sedimentation, coagulation/flocculation, electrocoagulation, flotation, membrane filtration, adsorption, and biodegradation, and on the emerging strategy of converting recovered microplastics into value-added porous carbon materials via hydrothermal treatment and pyrolysis. Carbonized microplastics exhibit high surface area and adsorption capacity for dyes, heavy metals, and organic pollutants, offering a circular approach that simultaneously mitigates plastic pollution and enhances wastewater treatment efficiency. By integrating source control, optimized removal technologies, and carbonization-based valorization, this review proposes a dual-benefit framework that transforms textile-derived microplastic waste from an environmental liability into a functional resource for sustainable water purification. Full article

The environmental degradation of plastics results not only in their mechanical fragmentation into microplastics (MPs), but also in polymer main-chain scission processes, causing continuous leaching and/or volatilization of low-molecular-weight species, often characterized by a hazardous profile. In this study, we investigated the hydrophilic photooxidation products (HyPOPs) generated upon UV irradiation of polystyrene (PS) and their transformation catalyzed by the enzyme laccase from the fungus Trametes versicolor. Through a series of enzymatic tests, the enzyme was found to promote coupling and conjugation reactions of HyPOPs into poorly soluble compounds mimicking natural humic acids. The enzymatic activity of laccase was studied under different experimental conditions to simulate those found in environmental matrices. Due to their oligomeric nature, these humic acid-like products of metabolic transformation by the fungal laccase are here nicknamed “mycoplastics” (i.e., polymers from fungi). This enzymatic biodegradation and biotransformation of xenobiotic HyPOPs highlights the role of specific enzymes as biological tools for environmental self-repair of polluted ecosystems. Moreover, it opens new perspectives for remediation strategies targeting elusive micro- and nanoplastics and their continuously generated hazardous molecular degradation by-products. Humic acid-like products resulting from laccase conversion of HyPOPs could contribute to the rehabilitation of contaminated sites by promoting the removal of toxic contaminants from soil and water. Full article