Search Results (78)

This study presents a novel energy harvesting device that combines piezoelectric and electromagnetic transduction to extract energy from fluid flow within pipelines to supply power to wireless sensor nodes for the digital transformation of pipeline networks. The proposed harvester consisted of a permanent magnet, an unimorph circular piezoelectric plate, an adjustable housing, two wound coils, and a coil holder. In laboratory tests, the harvester demonstrated an ability to produce 831.7 µW of AC power and 680 µW of DC power at a flow pressure of 2.90 kPa and a flow rate of 11.083 L/s. The energy harvester charged a power backup from 1.01 V to 4.49 V in a time duration of 120 min. Additionally, a low-power wireless system for monitoring pipeline pressure was developed and integrated with this energy harvesting system. By incorporating this technology into the digitization of pipeline systems, continuous power generation is possible, ensuring the reliable and autonomous operation of sensors for real-time data collection and monitoring of the pipeline network. The hybrid flow energy harvester surpasses both earlier standalone electromagnetic and piezoelectric flow energy harvesters. Full article

This study investigates the effect of incorporating an electromagnetic harvester inside the bluff body of a 2-DoF hybrid harvester in comparison to a standalone piezoelectric harvester for various external loads. The harvester is excited through a vortex-induced vibration owing to the resultant wake vortices created behind the bluff body. The coupled dynamics of the two harvester components are modeled, and numerical simulations are conducted to evaluate the system’s performance under varying electrical loads. Numerical results show that at high, optimum electrical load, the standalone piezoelectric harvester outperforms the hybrid harvester. Nevertheless, for small electrical loads, the results show that the hybrid harvester outperforms the standalone PZT harvester by up to 18% in peak power output, while reducing the bandwidth by approximately 10% compared to the standalone piezoelectric harvester. Optimal spring stiffness values were identified, with the hybrid harvester achieving its maximum output power at a spring stiffness of 83.56 N/m. These findings underscore the need for careful design considerations, as the hybrid harvester may not achieve enhanced power output and bandwidth under higher electrical loads. Full article

Ocean energy is an abundant, eco-friendly, and renewable energy resource that is useful for powering sensor networks connected to the maritime Internet of Things (MIoT). These sensor networks can be used to measure different marine environmental parameters that affect ocean infrastructure integrity and harm marine ecosystems. This ocean energy can be harnessed through hybrid nanogenerators that combine triboelectric nanogenerators, electromagnetic generators, piezoelectric nanogenerators, and pyroelectric generators. These nanogenerators have advantages such as high-power density, robust design, easy operating principle, and cost-effective fabrication. However, the performance of these nanogenerators can be affected by the wear of their main components, reduction of wave frequency and amplitude, extreme corrosion, and sea storms. To address these challenges, future research on hybrid nanogenerators must improve their mechanical strength, including materials and packages with anti-corrosion coatings. Herein, we present recent advances in the performance of different hybrid nanogenerators to harvest ocean energy, including various transduction mechanisms. Furthermore, this review reports potential applications of hybrid nanogenerators to power devices in marine infrastructure or serve as self-powered MIoT monitoring sensor networks. This review discusses key challenges that must be addressed to achieve the commercial success of these nanogenerators, regarding design strategies with advanced simulation models or digital twins. Also, these strategies must incorporate new materials that improve the performance, reliability, and integration of future nanogenerator array systems. Thus, optimized hybrid nanogenerators can represent a promising technology for ocean energy harvesting with application in the maritime industry. Full article

The urgent demand of wireless sensor nodes for long-life and maintenance-free miniature electrical sources with output power ranging from microwatts to milliwatts has accelerated the development of energy harvesting technologies. For the abundant and renewable nature of wind in environments, flow-induced vibration (FIV)-based wind energy harvesting has emerged as a promising approach. Electromagnetic FIV wind energy harvesters (WEHs) show great potential for realistic applications due to their excellent durability and stability. However, electromagnetic WEHs remain less studied than piezoelectric WEHs, with few dedicated review articles available. This review analyzes the working principle, device structure, and performance characteristics of electromagnetic WEHs based on vortex-induced vibration, galloping, flutter, wake galloping vibration, and Helmholtz resonator. The methods to improve the output power, broaden the operational wind speed range, broaden the operational wind direction range, and enhance the durability are then discussed, providing some suggestions for the development of high-performance electromagnetic FIV WEHs. Full article

To collect the energy generated by rotational motion in the natural environment, a piezoelectric electromagnetic hybrid energy harvester (HEH) based on a planetary gear system is proposed. The harvester combines piezoelectric and electromagnetic effects and is mainly used for collecting low-frequency rotational energy. The HEH has a compact structure and contains four sets of piezoelectric energy harvesters (PEHs) and electromagnetic energy harvesters (EMHs) inside. The working principle of the energy harvester is analyzed, its theoretical model is established, and a simulation analysis is conducted. To verify the effectiveness of the design, an experimental device is constructed. The results indicate that the HEH can generate an average output power of 250 mW under eight magnets and an external excitation frequency of 7 Hz. In actual power supply testing, the HEH can light up 60 LEDs and provide stable power supply for the temperature–humidity meter. Full article

Based on the research of the directional self-adaptive piezoelectric energy harvester (DSPEH), a structural design scheme of a multi-directional hybrid energy harvester (MHEH) is put forward. The working principle of the MHEH is experimentally studied. A prototype is designed and manufactured, and the output characteristics of the MHEH in vibrational degree of freedom (DOF) and rotational DOF are experimentally studied. Compared with the DSPEH, after adding the electromagnetic energy harvesting module, the MHEH effectively uses the rotational energy in the rotational DOF, achieves simultaneous energy harvesting from one excitation through two mechanisms, and the output power of the electromagnetic module reaches 61 μW. The total power of the system is increased by 10 times, the power density is increased by 500%, and the MHEH has high voltage output characteristics in multiple directions. Compared with traditional multi-directional and self-adaptive energy harvesters, the MHEH utilizes a reverse-thinking method to generate continuous rotational motion of the cantilever beam, thus eliminating the influence of external excitation direction on the normal vibration of the cantilever beam. In addition, the MHEH has achieved hybrid energy harvesting with a single cantilever beam and multiple mechanisms, providing new ideas for multi-directional energy harvesting. Full article

Wave energy is a widely distributed, abundant, and clean renewable energy source with tremendous potential for development. This study presents a multi-unit coupled motion hybrid generator (MCM-HG) based on a pendulum structure for harvesting low-frequency wave energy. The device integrates eight power generation units, including triboelectric nanogenerators (TENGs), electromagnetic generators (EMGs), and piezoelectric nanogenerators (PENGs), enhancing space utilization and energy conversion efficiency through coupled motion. Experiments show that at a frequency of 0.5 Hz and a swing angle of 15°, the MCM-HG achieves an output power of 22.07 mW and a power density of 7.36 Wm⁻³. The device successfully powers microelectronic devices, demonstrating its potential application value in the marine Internet of Things. Full article

Smart pavement is composed of a monitor network, communication network, data center, and energy supply system, and it requires reliable and efficient energy sources to power sensors and devices. The mechanical energy is wasted and dissipated as heat in traditional pavement; this energy can be reused to power low-power devices and sensors for smart pavement. Mechanical energy harvesting systems typically perform through electromagnetic, piezoelectric, and triboelectric methods. Among the different methods, electromagnetic harvesters stand out for their higher output power. However, current electromagnetic harvesters face challenges such as bulky designs, low power density, and high input displacement requirements. This study proposed a green electromagnetic harvester (GEH) based on up-frequency and a unidirectional rotation mechanism to harvest mechanical energy from the pavement. A prototype was designed and prepared. The influence of different parameters on the electrical performance of the harvester was studied by using an MTS test instrument and simulation methods. The results demonstrate that increasing the frequency and optimizing the magnetic array significantly enhances electrical output. The open-circuit voltage in the N-S mode is 3.1 times higher than that in the N-N mode. At a frequency of 9 Hz and a displacement of 3.0 mm, the open-circuit voltage of the GEH is 6.73 V, the maximum power output is 171.14 mW, the peak power density is 1277.16 W/m³, and the voltage has almost no decay after 100,000 cycles. Further, the application of the GEH in charging sensors and capacitors was demonstrated, which indicates the potential of a GEH to power sensors for smart roads. Full article

Agricultural sustainability is becoming more and more important for human health. Wireless sensing technology could provide smart monitoring in real time for different parameters in planting, breeding, and the food supply chain with advanced sensors such as flexible sensors; wireless communication networks such as third-, fourth-, or fifth-generation (3G, 4G, or 5G) mobile communication technology networks; and artificial intelligence (AI) models. Many sustainable, natural, renewable, and recycled facility energies such as light, wind, water, heat, acoustic, radio frequency (RF), and microbe energies that exist in actual agricultural systems could be harvested by advanced self-powered technologies and devices using solar cells, electromagnetic generators (EMGs), thermoelectric generators (TEGs), piezoelectric generators (PZGs), triboelectric nanogenerators (TENGs), or microbial full cells (MFCs). Sustainable energy harvesting to the maximum extent possible could lead to the creation of sustainable self-powered wireless sensing devices, reduce carbon emissions, and result in the implementation of precision smart monitoring, management, and decision making for agricultural production. Therefore, this article suggests that proposing and developing a self-powered wireless sensing system for sustainable agriculture (SAS) would be an effective way to improve smart agriculture production efficiency while achieving green and sustainable agriculture and, finally, ensuring food quality and safety and human health. Full article

Energy harvesting technology plays an important role in converting ambient energy into useful electrical energy to power wireless sensing and system monitoring, especially for systems operating in isolated, abandoned or embedded locations where battery replacement or recharging is not a feasible solution. This paper provides an integrative study of the methodologies and technologies of energy harvesting from fluid flow-induced vibration (FIV). The recent research endeavors contributing to flow-based energy harvesting have been reviewed to present the state-of-the-art issues and challenges. Several mechanisms on FIVs including vortex-induced vibrations (VIVs), flutter, galloping and wake galloping are thoroughly discussed in terms of device architecture, operating principles, energy transduction, voltage production and power generation. Additionally, advantages and disadvantages of each FIV energy harvesting mechanism are also talked about. Power enhancement methods, such as induced nonlinearities, optimized harvester’s configuration, hybridization and coupling of aerodynamic instabilities, for boosting the harvester’s output are also elucidated and categorized. Moreover, rotary wind energy harvesters are reviewed and discussed. Finally, the challenges and potential directions related to the flow-based energy harvesters (FBEHs) are also mentioned to provide an insight to researchers on the development of sustainable energy solutions for remote wireless sensing and monitoring systems. Full article

Numerous recent studies address the concept of energy harvesting from natural wind excitation vibration to piezoelectric surfaces, aerodynamic losses, and electromagnetic dampers. All these techniques require a connection to an energy-management circuit. However, the simulation model for energy conversion and management dedicated to this task has not yet been described. This paper presents a model-based simulation for an energy conversion system using piezoelectric energy-harvester system (PEHS) technology. A controlled pulse width modulation (PWM) rectifier, a closed-loop buck-boost converter, and a piezoelectric transducer comprise a dynamic mathematical model of a PEHS. The control blocks of the closed-loop buck-boost converter use the perturbation and observation (P&O) algorithm based on maximum power point tracking (MPPT), which adapts the operational voltage of the piezoelectric source to deliver the maximum power to load. A simulation program is employed to perform mathematical analysis on various wind vibration scenarios, piezoelectric sources without PWM converters, and piezoelectric vibration sources connected to a closed-loop P&O converter. The crucial results of this paper demonstrated that the proposed dynamic PEHS model effectively fed low-power electronic loads by directly adjusting the output voltage level to the set voltage, even under different vibration severity levels. As a result, the proposed PEHS dynamic model serves as a guideline for researchers in the development of self-powered sensors, which contributes to understanding sustainable energy alternatives. Full article

Marine wave energy exhibits significant potential as a renewable resource due to its substantial energy storage capacity and high energy density. However, conventional wave power generation technologies often suffer from drawbacks such as high maintenance costs, cumbersome structures, and suboptimal conversion efficiencies, thereby limiting their potential. The wave power generation technologies based on micro-energy technology have emerged as promising new approaches in recent years, owing to their inherent advantages of cost-effectiveness, simplistic structure, and ease of manufacturing. This paper provides a comprehensive overview of the current research status in wave energy harvesting through micro-energy technologies, including detailed descriptions of piezoelectric nanogenerators, electromagnetic generators, triboelectric nanogenerators, dielectric elastomer generators, hydrovoltaic generators, and hybrid nanogenerators. Finally, we provide a comprehensive overview of the prevailing issues and challenges associated with these technologies, while also offering insights into the future development trajectory of wave energy harvesting technology. Full article

The continuous worsening of the natural surroundings requires accelerating the exploration of green energy technology. Utilising ambient vibration to power electronic equipment constitutes an important measure to address the power crisis. Vibration power is widely dispersed in the surroundings, such as mechanical vibration, acoustic vibration, wind vibration, and water wave vibration. Collecting vibration energy is one of the research hotspots in the field of energy. Meanwhile, it is also an important way to solve the energy crisis. This paper illustrates the working principles and recent research progress of five known methods of vibrational energy harvesting, namely, electromagnetic, piezoelectric, friction electric, electrostatic, and magnetostrictive vibrational energy harvesters. The strengths and weaknesses of each method are summarised. At the end of the article, the future trends of micro-nano vibrational energy collectors are envisioned. Full article

The ability to power low-power devices and sensors has drawn a great deal of interest to energy harvesting from ambient vibrations. The application of variable-length pendulum systems in conjunction with piezoelectric or electromagnetic energy-harvesting devices is examined in this thorough analysis. Because of their changeable length, such pendulums may effectively convert mechanical vibrations into electrical energy. This study covers these energy-harvesting systems’ basic theories, design concerns, modeling methods, and performance optimization strategies. This article reviews several studies that look at dynamic models, the effects of damping coefficients, device designs, and excitation parameters on energy output. The advantages and disadvantages of piezoelectric and electromagnetic coupling techniques are demonstrated by comparative research. This review also looks at technical advances and future research prospects in variable-length, pendulum-based energy harvesting. An expanded model for an energy harvester based on a variable-length pendulum derived from the modified, swinging Atwood machine is more specifically presented. This model’s numerical simulations, estimated current and voltage outputs, and produced power from the electromagnetic and piezoelectric devices integrated at various points in a 4-DOF variable-length pendulum model all indicate encouraging results. This necessitates extra study, changes, and optimizations to improve the usefulness of the proposed model. Finally, important dynamic models on developing variable-length, pendulum-based energy harvesters for usage in a range of applications to create sustainable energy are summarized. Full article

This article develops a multi-stable hybrid energy harvester (MSHEH) which consists of a piezoelectric energy harvester (PEH) and an electromagnetic energy harvester (EMEH). By tuning two parameters, the MSHEH can achieve a mono-stable, bi-stable, and tri-stable state, respectively. A numerical procedure is developed to compute the EMEH’s transduction factor. The obtained result is validated experimentally. Using the equivalent magnetic 2-point dipole theory, the restoring force model of the magnetic spring is established. The obtained model is verified experimentally. The energy harvesting performances of the MSHEH under the four different configurations (linear, mono-stable, bi-stable and tri-stable) subjected to frequency sweep excitations are evaluated by simulation and validated by experiment. The comparative analysis focuses on power output, accumulated harvested energy, and effective energy-harvesting bandwidth. The optimum load resistances are investigated by Pareto front optimizations. The following key findings are obtained. When subjected to high-level frequency sweep excitation, the tri-stable configuration exhibits the widest frequency bandwidth and the highest total accumulated harvested energy. When subjected to low-level frequency sweep excitation, the bi-stable configuration is more efficient in energy harvesting. The best performance trade-off between the PEH and EMEH can be achieved by selecting the optimum load resistances properly. Full article