Search Results (25)

For those who did not follow the invention and development of enantioselective catalysis, this review introduces pertinent historical aspects of the field and presents the scientific concepts of asymmetric bio- and organocatalysis. They are powerful technologies applied in organic laboratories and industry. They realize chiral amplification by converting inexpensive achiral substrates and reagents into enantiomerically enriched products using readily recoverable solvents, if any are used. Racemic substrates can also be deracemized catalytically. More sustainable fabrications are now available that require neither toxic metallic species nor costly reaction conditions in terms of energy, atmosphere control, product purification, and safety. Nature has been the source of the first asymmetric catalysts (microorganisms, enzymes, alkaloids, amino acids, peptides, terpenoids, sugars, and their derivatives). They act as temporary chiral auxiliaries and lower the activation free energy of the reaction by altering the reaction mechanism. Reductions, oxidations, carbon-carbon and carbon-heteroatom bond-forming reactions are part of the process panoply. Asymmetric catalyzed multicomponent and domino reactions are becoming common. Typical modes of activation are proton transfers, hydrogen bonded complex formation, charged or uncharged acid/base pairing (e.g., σ-hole catalysts), formation of equilibria between achiral aldehydes and ketones with their chiral iminium salt or/and enamine intermediates, umpolung of aldehydes and ketones by reaction with N-heterocyclic carbenes (NHCs), phase transfer catalysis (PTC), etc. Often, the best enantioselectivities are observed with polyfunctional catalysts derived from natural compounds, but not always. They may combine to form chiral structures containing nitrogen, phosphorus, sulfur, selenium, and iodine functional moieties. Today, man-made enantiomerically enriched catalysts, if not enantiomerically pure, are available in both enantiomeric forms. Being robust, they are recovered and reused readily. Full article

The advancement of overall water-splitting technologies relies on the development of earth-abundant electrocatalysts that efficiently produce H₂ as a chemical fuel while offering high catalytic efficiency, structural robustness, and low-cost synthesis. Therefore, we aim to develop a cost-effective and durable non-noble electrocatalyst for overall water splitting. A straightforward hydrothermal approach was employed to fabricate freestanding polyhedral Co₃O₄ on a microporous Ni foam scaffold, followed by anion-exchange transformation in the presence of Na₂S solution to yield its conductive sulfide analog. The engineered Co₃S₄ electrode delivers remarkable HER activity in 1.0 M KOH, requiring a low overpotential (<100 mV) to drive 10 mA cm⁻², far outperforming its pristine oxide counterpart and even closely benchmarking with a commercial Pt/C catalyst. This exceptional performance is governed by the synergistic effects of enhanced electrical conductivity, abundant catalytic sites, and accelerated charge-transfer kinetics introduced through sulfur substitution. Furthermore, the optimized Co₃S₄ electrodes enable a bifunctional overall water-splitting device that achieves a cell voltage of >1.76 V at 100 mA cm⁻² and maintains prolonged operational stability for over 100 hrs. of continuous operation. Post-stability analyses confirm insignificant phase preservation during testing, ensuring sustained activity throughout the electrolysis process. This study highlights the potential of anion-exchanged Co₃S₄ as a cost-effective and durable catalyst for high-performance HER and full-cell water-splitting applications. Full article

This review surveys recent advances and emerging prospects in phase-transfer catalysis (PTC) for fuel desulfurization. In response to increasingly stringent environmental regulations, the removal of sulfur from transportation fuels has become imperative for curbing SO_x emissions. Conventional hydrodesulfurization (HDS) operates under severe temperature–pressure conditions and displays limited efficacy toward sterically hindered thiophenic compounds, motivating the exploration of non-hydrogen routes such as oxidative desulfurization (ODS). Within ODS, PTC offers distinctive benefits by shuttling reactants across immiscible phases, thereby enhancing reaction rates and selectivity. In particular, PTC enables efficient migration of organosulfur substrates from the hydrocarbon matrix into an aqueous phase where they are oxidized and subsequently extracted. The review first summarizes the deployment of classic PTC systems—quaternary ammonium salts, crown ethers, and related agents—in ODS operations and then delineates the underlying phase-transfer mechanisms, encompassing reaction-controlled, thermally triggered, photo-responsive, and pH-sensitive cycles. Attention is next directed to a new generation of catalysts, including quaternary-ammonium polyoxometalates, imidazolium-substituted polyoxometalates, and ionic-liquid-based hybrids. Their tailored architectures, catalytic performance, and mechanistic attributes are analyzed comprehensively. By incorporating multifunctional supports or rational structural modifications, these systems deliver superior desulfurization efficiency, product selectivity, and recyclability. Despite such progress, commercial deployment is hindered by the following outstanding issues: long-term catalyst durability, continuous-flow reactor design, and full life-cycle cost optimization. Future research should, therefore, focus on elucidating structure–performance relationships, translating batch protocols into robust continuous processes, and performing rigorous environmental and techno-economic assessments to accelerate the industrial adoption of PTC-enabled desulfurization. Full article

Finding alternatives to platinum that exhibit high activity, stability, and abundant reserves as oxygen reduction electrocatalysts is crucial for the advancement of fuel cells. In this study, we first mixed FeCl₂·4H₂O, 1,10-phenanthroline, and Vulcan XC-72, followed by pyrolysis in a nitrogen atmosphere, to obtain FeNC. Subsequently, we combined FeNC with MXene produce FeNC/MXene composites. The FeNC/MXene catalyst achieved a half-wave potential of 0.857 V in an alkaline medium, exhibiting better oxygen reduction reaction (ORR) activity and durability than commercial Pt/C catalysts. The layered structure of MXene endows the material with a high specific surface area and facilitates efficient electron transfer pathways, thereby promoting rapid charge transfer and material diffusion. The cleavage of Ti-C bonds in Ti₃C₂ at elevated temperatures results in the transformation of MXene into TiO₂, where the coexistence of anatase and rutile phases generates a synergistic effect that enhances both the mass transfer rate and the electrical conductivity of the catalytic layer. Additionally, the unique electronic structure of the FeN_x sites simultaneously optimizes electrocatalytic activity and stability. Leveraging these structural advantages, the FeNC/MXene composite catalysts demonstrate exceptional catalytic activity and long-term stability in oxygen reduction reactions. Full article

This work aims to explore the influence of crystal phase engineering on the photocatalytic hydrogen evolution activity of Ru/C₃N₄ systems. By precisely tuning the combination of Ru precursors and reducing solvents, we successfully synthesized Ru co-catalysts with distinct crystal phases (hcp and fcc) and integrated them with C₃N₄. The photocatalytic hydrogen evolution experiments demonstrated that hcp-Ru/C₃N₄ achieved a significantly higher hydrogen evolution rate (24.23 μmol h⁻¹) compared to fcc-Ru/C₃N₄ (7.44 μmol h⁻¹), with activity reaching approximately 42% of Pt/C₃N₄ under the same conditions. Photocurrent and electrochemical impedance spectroscopy analyses revealed that hcp-Ru/C₃N₄ exhibited superior charge separation and transfer efficiency. Moreover, Gibbs free energy calculations indicated that the hydrogen adsorption energy of hcp-Ru (ΔG_H* = −0.14 eV) was closer to optimal compared to fcc-Ru (−0.32 eV), enhancing the hydrogen generation process. These findings highlight that crystal-phase engineering plays a critical role in tuning the electronic structure and catalytic properties of Ru-based systems, offering insights for the design of highly efficient noble metal catalysts for photocatalysis. Full article

Ethenzamide (2-ethoxybenzamide), besides acetylsalicylic acid, is one of the mostly used salicylic acid derivatives in pharmaceuticals. It has analgesic and anti-inflammatory effects that originate from the inhibition of cyclooxygenase (COX-1) activity, thus blocking prostaglandin synthesis. In this work, efficient and eco-friendly methods were developed for the synthesis of ethenzamide via the O-alkylation reaction of salicylamide. The reactions were carried out under conventional conditions in a solvent-free system using variant solvents and different phase transfer catalysts (PTC) in the presence of microwave radiation or ultrasonic conditions. It was shown that in solvent-free conditions using TBAB as a catalyst, ethenzamide can be obtained within 15 min at 80 °C with 79% yield. Meanwhile, using microwave radiation under the same conditions, the reaction time can be shortened to 90 s with 92% yield. Notably, high yields can be achieved under PTC in water (or organic solvent-free) conditions using microwave radiation (2 min, 94%) or ultrasound (10 min, 95% efficiency). The studies prove that the PTC synthesis process of ethenzamide can be conducted under mild conditions, with a shorter reaction time and remarkably lower energy consumption in comparison to conventional processes, thus actualizing “green chemistry” for practical ethenzamide preparation. Full article

In this paper, the green synthesis of isoeugenol methyl ether (IEME) from eugenol by O-methylation and isomerization is completed using a one-step green process. In the methylation reaction, dimethyl carbonate (DMC) was used as a green chemistry reagent instead of the traditional harmful methylation reagents, in accordance with the current concept of green chemistry. The phase transfer catalyst (PTC) polyethylene glycol 800 (PEG-800) was introduced into the isomerization reaction to break the barrier of difficult contact between solid and liquid phases and drastically reduce the reaction conditions by shortening the reaction time and reducing the alkalinity of the reaction system. The catalytic systems for the one-step green synthesis of IEME were screened, and it was shown that the catalytic system “K₂CO₃ + PEG-800” was the most effective. The effects of reaction temperature, n(DMC):n(eugenol) ratio, n(PEG-800):n(eugenol) ratio, and n(K₂CO₃):n(eugenol) ratio on eugenol conversion, IEME yield, and IEME selectivity were investigated. The results showed that the best reaction was achieved at a reaction temperature of 140 °C, a reaction time of 3 h, a DMC drip rate of 0.09 mL/min, and n(eugenol):n(DMC):n(K₂CO₃):n(PEG-800) = 1:3:0.09:0.08. As a result of the conversion of 93.1% of eugenol to IEME, a yield of 86.1% IEME as well as 91.6% IEME selectivity were obtained. Full article

Due to the depletion of fossil fuels, the demand for renewable energy has increased, thus stimulating the development of novel materials for energy conversion devices such as fuel cells. In this work, nickel nanoparticles loaded on reduced graphene oxide (Ni/rGO) with small size and good dispersibility were successfully prepared by controlling the pyrolysis temperature of the precursor at 450 °C, assisted by a microwave-assisted hydrothermal method, and exhibited enhanced electrocatalytic activity towards oxygen reduction reaction (ORR). Additionally, the electron enrichment on Ni NPs was due to charge transfer from the rGO support to metal nickel, as evidenced by both experimental and theoretical studies. Metal–support interactions between nickel and the rGO support also facilitated charge transfer, contributing to the enhanced ORR performance of the composite material. DFT calculations revealed that the first step (from O₂ to HOO*) was the rate-determining step with an RDS energy barrier lower than that of the Pt(111), indicating favorable ORR kinetics. The HOO* intermediates can be transferred onto rGO by the solid-phase spillover effect, which reduces the chemical adsorption on the nickel surface, thereby allowing continuous regeneration of active nickel sites. The HO₂⁻ intermediates generated on the surface of rGO by 2e⁻ reduction can also efficiently diffuse towards the nearby Ni surface or the interface of Ni/rGO, where they can be further rapidly reduced to OH⁻. This mechanism acts as the pseudo-four-electron path on the RRDE. Furthermore, Ni/rGO-450 demonstrated superior stability, methanol tolerance, and durability compared to a 20 wt% Pt/C catalyst, making it a cost-effective alternative to conventional noble metal ORR catalysts for fuel cells or metal–air batteries. Full article

In order to obtain sulfur-containing organophosphorus compounds that are promising as extractants of heavy metals, the interaction of elemental phosphorus and sulfur with alkyl bromides catalyzed using strong bases was studied. According to the task, the reaction of non-toxic and non-flammable red phosphorus with alkyl bromides under conditions of phase transfer catalysts (PTC), followed by the introduction of elemental sulfur into the reaction medium, were studied. It is shown that alkyl bromides interact with red phosphorus when heated (95–105 °C, 5–8 h) under conditions of phase transfer catalysts (PTC) in a two-phase system: a 60% aqueous solution of KOH-toluene-benzyltriethylammonium chloride (BTEAC) forming a mixture of organophosphorus compounds along with alkylphosphines (57–60%), are the main reaction products; alkylphosphine oxides are also formed (40–43%). The introduction of elemental sulfur (solution in toluene) at the final stage of the process into the reaction mass cooled to 40–60 °C leads to the expected alkylphosphine sulfides, which are the result of the interaction of alkylphosphines with sulfur. The formation of complex mixtures of products prevents the release of target alkylphosphine sulfides in individual form. However, the synthesized mixture of alkylphosphine sulfides and alkylphosphine oxides without separation into individual components is promising for studying its extraction properties in relation to heavy metals. Testing of the extraction properties of synthesized mixtures of alkylphosphine sulfides and alkylphosphine oxides in relation to heavy metals (Ni, Co, Zn, Pb) and noble metals (Ag) showed that the resulting mixtures of tertiary phosphine oxides and phosphine sulfides are highly effective extractants. The degree of extraction in relation to Ni, Co, Zn, and Pb varies from 99.90 to 99.99%, and for Ag from 99.56 to 99.59%. Full article

Ten novel bifunctional quaternary ammonium salt phase-transfer organocatalysts were synthesized in four steps from (+)-camphor-derived 1,3-diamines. These quaternary ammonium salts contained either (thio)urea or squaramide hydrogen bond donor groups in combination with either trifluoroacetate or iodide as the counteranion. Their organocatalytic activity was evaluated in electrophilic heterofunctionalizations of β-keto esters and in the Michael addition of a glycine Schiff base with methyl acrylate. α-Fluorination and chlorination of β-keto esters proceeded with full conversion and low enantioselectivities (up to 29% ee). Similarly, the Michael addition of a glycine Schiff base with methyl acrylate proceeded with full conversion and up to 11% ee. The new catalysts have been fully characterized; the stereochemistry at the C-2 chiral center was unambiguously determined. Full article

Phase transfer catalysis (PTC) is an excellent possibility in the synthesis of organic compounds as it allows the reactions to be carried out under the conditions of green chemistry, while maintaining high yields and selectivity. The great advantage of these reactions is also the possibility of carrying out the reactions not only under conventional conditions, but also mechanochemically in solvent-free processes. Bearing this in mind, we decided to develop a new method for the synthesis of known biologically active compounds from the group of long-chain arylpiperazines (LCAPs). The first mortar trials were very promising and prompted us to carry out a series of ball mill reactions. One of the technological problems that we encountered while conducting reactions in the ball mill was the difficulty in extracting the post-reaction mixture. We tested the effects of additives improving the insulation of the product, such as, e.g., starch, zeolites, and silica. Research has proven that with appropriate process conditions using TBAB as a catalyst and in the presence of potassium carbonate and a small amount of Zeolite ZSM5 or silica, aripiprazole can be obtained with a yield of 90% in just five minutes. The obtained results are very promising and it is worth considering them as an alternative to the synthesis of other compounds from the LCAPS group. Full article

Abietic acid and its derivatives have broadly been used in fine chemicals and are renewable resources. Its inherent chiral rigid tricyclic phenanthrene skeleton is unique. Its utilities in asymmetric catalysis remain to be explored. A series new amide-type chiral quaternary ammoniums bearing dehydroabietylamine were designed, and prepared by two convenient steps. Acylation of dehydroabietylamine with bromoacetyl chloride afforded amide holding bromoacetyl group in higher yields using triethyl amine as base. Subsequent quaternization reaction gave the desired amide-type chiral quaternary ammoniums. The new chiral quaternary ammoniums can be used as phase-transfer catalyst (PTC) for the transition metal-catalysed alkynylation of isatin derivatives. Full article

Heteroatom doping is considered an efficient strategy when tuning the electronic and structural modulation of catalysts to achieve improved performance towards renewable energy applications. Herein, we synthesized a series of carbon-based hierarchical nanostructures through the controlled pyrolysis of Co-MOF (metal organic framework) precursors followed by in situ phosphidation. Two kinds of catalysts were prepared: metal nanoparticles embedded in carbon nanotubes, and metal nanoparticles dispersed on the carbon surface. The results proved that the metal nanoparticles embedded in carbon nanotubes exhibit enhanced ORR electrocatalytic performance, owed to the enriched catalytic sites and the mass transfer facilitating channels provided by the hierarchical porous structure of the carbon nanotubes. Furthermore, the phosphidation of the metal nanoparticles embedded in carbon nanotubes (P-Co-CNTs) increases the surface area and porosity, resulting in faster electron transfer, greater conductivity, and lower charge transfer resistance towards ORR pathways. The P-Co-CNT catalyst shows a half-wave potential of 0.887 V, a Tafel slope of 67 mV dec⁻¹, and robust stability, which are comparatively better than the precious metal catalyst (Pt/C). Conclusively, this study delivers a novel path for designing multiple crystal phases with improved catalytic performance for energy devices. Full article

The ¹⁸F syntheses of tracers for positron emission tomography (PET) typically require several steps, including extraction of [¹⁸F]fluoride from H₂[¹⁸O]O, elution, and drying, prior to nucleophilic substitution reaction, being a laborious and time-consuming process. The elution of [¹⁸F]fluoride is commonly achieved by phase transfer catalysts (PTC) in aqueous solution, which makes azeotropic drying indispensable. The ideal PTC is characterized by a slightly basic nature, its capacity to elute [¹⁸F]fluoride with anhydrous solvents, and its efficient complex formation with [¹⁸F]fluoride during subsequent labeling. Herein, we developed tri-(tert-butanol)-methylammonium iodide (TBMA-I), a quaternary ammonium salt serving as the PTC for ¹⁸F-fluorination reactions. The favorable elution efficiency of [¹⁸F]fluoride using TBMA-I was demonstrated with aprotic and protic solvents, maintaining high ¹⁸F-recoveries of 96–99%. ¹⁸F-labeling reactions using TBMA-I as PTC were studied with aliphatic 1,3-ditosylpropane and aryl pinacol boronate esters as precursors, providing ¹⁸F-labeled products in moderate-to-high radiochemical yields. TBMA-I revealed adequate properties for application to ¹⁸F-fluorination reactions and could be used for elution of [¹⁸F]fluoride with MeOH, omitting an additional base and azeotropic drying prior to ¹⁸F-labeling. We speculate that the tert-alcohol functionality of TBMA-I promotes intermolecular hydrogen bonding, which enhances the elution efficiency and stability of [¹⁸F]fluoride during nucleophilic ¹⁸F-fluorination. Full article

Commercial activated carbon, pretreated in helium at 1600 °C and largely free of micropores, was used as a support for two series of 2 wt.% Pd–Pt catalysts, prepared by impregnating the support with metal acetylacetonates or metal chlorides. The catalysts were characterized by temperature-programmed methods, H₂ chemisorption, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and scanning transmission electron microscopy (STEM) with energy dispersive spectroscopy (EDS). Overall, the results confirmed the existence of well-dispersed Pd–Pt nanoparticles in the bimetallic catalysts, ranging in size from 2 to 3 nm. The catalysts were investigated in the gas phase hydrodechlorination of chlorodifluoromethane (HCFC-22). In this environmentally relevant reaction, both the ex-chloride and ex-acetylacetonate Pd–Pt/C catalysts exhibited better hydrodechlorination activity than the monometallic catalysts, which is consistent with the previous results of hydrodechlorination for other chlorine-containing compounds. This synergistic effect can be attributed to the electron charge transfer from platinum to palladium. In general, product selectivity changes regularly with Pd–Pt alloy composition, from high in CH₂F₂ for Pd/C (70–80%) to the selective formation of CH₄ for Pt/C (60–70%). Full article