Search Results (244)

The time series prediction of visibility in terms of various meteorological variables, such as relative humidity, temperature, atmospheric pressure, and wind speed, is presented in this paper using Single-Variable Regression Analysis (SVRA), Artificial Neural Network (ANN), and Hybrid Adaptive Neuro-fuzzy Inference System (ANFIS) techniques for several sub-tropical locations. The initial method used for the prediction of visibility in this study was the SVRA, and the results were enhanced using the ANN and ANFIS techniques. Throughout the study, neural networks with various algorithms and functions were trained with different atmospheric parameters to establish a relationship function between inputs and visibility for all locations. The trained neural models were tested and validated by comparing actual and predicted data to enhance visibility prediction accuracy. Results were compared to assess the efficiency of the proposed systems, measuring the root mean square error (RMSE), coefficient of determination (R²), and mean bias error (MBE) to validate the models. The standard statistical technique, particularly SVRA, revealed that the strongest functional relationship was between visibility and RH, followed by WS, T, and P, in that order. However, to improve accuracy, this study utilized back propagation and hybrid learning algorithms for visibility prediction. Error analysis from the ANN technique showed increased prediction accuracy when all the atmospheric variables were considered together. After testing various neural network models, it was found that the ANFIS model provided the most accurate predicted results, with improvements of 31.59%, 32.70%, 30.53%, 28.95%, 31.82%, and 22.34% over the ANN for Durban, Cape Town, Mthatha, Bloemfontein, Johannesburg, and Mahikeng, respectively. The neuro-fuzzy model demonstrated better accuracy and efficiency by yielding the finest results with the lowest RMSE and highest R² for all cities involved compared to the ANN model and standard statistical techniques. However, the statistical performance analysis between measured and estimated visibility indicated that the ANN produced satisfactory results. The results will find applications in Optical Wireless Communication (OWC), flight operations, and climate change analysis. Full article

Radio frequency (RF)-based wireless systems are broadly used in communication systems such as mobile networks, satellite links, and monitoring applications. These systems offer outstanding advantages over wired systems, particularly in terms of ease of installation. However, researchers are looking for safer alternatives as a result of worries about possible health problems connected to high-frequency radiofrequency transmission. Using the visible light spectrum is one promising approach; three cutting-edge technologies are emerging in this regard: Optical Camera Communication (OCC), Light Fidelity (Li-Fi), and Visible Light Communication (VLC). In this paper, we propose a Multiple-Input Multiple-Output (MIMO) modulation technology for Internet of Things (IoT) applications, utilizing an LED array and time-domain on-off keying (OOK). The proposed system is compatible with both rolling shutter and global shutter cameras, including commercially available models such as CCTV, webcams, and smart cameras, commonly deployed in buildings and industrial environments. Despite the compact size of the LED array, we demonstrate that, by optimizing parameters such as exposure time, camera focal length, and channel coding, our system can achieve up to 20 communication links over a 20 m distance with low bit error rate. Full article

This paper presents a problem definition and feasibility check for an algorithm to select a connection point in an existing fiber-optical access network topology that can be used to connect a new site, the planned location, via an E-band millimeter-wave radio link. The newly added fixed wireless access connections must meet end-to-end network requirements for availability, latency, and bandwidth. To accommodate highly dynamic service traffic patterns, requirements are defined with a suitable time granularity. Similarly, dynamic changes in available network capacity affect end-to-end availability, latency, and bandwidth. The proposed algorithm is designed to handle these dynamic changes both in the service requirements and in the available resources. Full article

Vehicular visible light communication (VVLC) with ultralow electromagnetic interference has great potential to propel the growth of the Internet of Vehicles (IoV). However, ensuring quick response times and minimal delays in VVLC is a significant challenge brought on by fast-moving vehicles. In response to this problem, we propose a heuristic optical flow scheduling algorithm. First, the optical flow scheduling problem of VVLC is built as a multi-objective optimization model considering the makespan, delay, schedulable ratio, and bandwidth utilization with non-conflict constraints. Second, an improved artificial plant community (APC) algorithm with enhanced global and local search capabilities is proposed to achieve low-delay communication for time-sensitive optical flows. Finally, a series of benchmark experiments are conducted to show that the proposed algorithm can efficiently schedule optical flows with minimal delay. The cost of this algorithm is very low, and it is suitable for deployment on edge computing platforms such as vehicles. Full article

Free-space optical (FSO) communication is a promising high-capacity solution for future wireless networks, particularly for backhaul and fronthaul links in 5G and emerging 6G systems. However, it remains highly vulnerable to environmental impairment, especially in arid regions prone to dust storms. While prior studies have addressed atmospheric effects such as fog and turbulence, the specific impact of dust on signal performance remains insufficiently explored. This work presents a probabilistic modeling framework for evaluating the performance of an intensity modulation/direct detection (IM/DD) FSO system under dust storm conditions. Using a controlled laboratory environment, we conducted measurements of the optical signal under dust-induced channel conditions using real-world dust samples collected from an actual dust storm. We identified the Beta distribution as the most accurate model for the measured signal fluctuations. Closed-form expressions were derived for average bit error rate (BER), outage probability, and channel capacity. The close agreement between the analytical, approximate, and simulated results validates the proposed model as a reliable tool for evaluating FSO system performance. The results show that the forward error correction (FEC) BER threshold of ${10}^{-3}$ is achieved at approximately 10.5 dB, and the outage probability drops below ${10}^{-3}$ at 10 dB average SNR. Full article

High demand for 6G wireless has made photonics-aided D-band (110–170 GHz) communication a research priority. Photonics-aided technology integrates optical and wireless communications to boost spectral efficiency and transmission distance. This study presents a Radio-over-Fiber (RoF) communication system utilizing photonics-aided technology for 4600 m long-distance D-band transmission. We successfully show the transmission of a 50 Gbps (25 Gbaud) QPSK signal utilizing a 128.75 GHz carrier frequency. Notwithstanding these encouraging outcomes, RoF systems encounter considerable obstacles, including pronounced nonlinear distortions and phase noise related to laser linewidth. Numerous factors can induce nonlinear impairments, including high-power amplifiers (PAs) in wireless channels, the operational mechanisms of optoelectronic devices (such as electrical amplifiers, modulators, and photodiodes), and elevated optical power levels during fiber transmission. Phase noise (PN) is generated by laser linewidth. Despite the notable advantages of classical Volterra series and deep neural network (DNN) methods in alleviating nonlinear distortion, they display considerable performance limitations in adjusting for phase noise. To address these problems, we propose a novel post-processing approach utilizing a two-dimensional convolutional neural network (2D-CNN). This methodology allows for the extraction of intricate features from data preprocessed using traditional Digital Signal Processing (DSP) techniques, enabling concurrent compensation for phase noise and nonlinear distortions. The 4600 m long-distance D-band transmission experiment demonstrated that the proposed 2D-CNN post-processing method achieved a Bit Error Rate (BER) of 5.3 × 10⁻³ at 8 dBm optical power, satisfying the soft-decision forward error correction (SD-FEC) criterion of 1.56 × 10⁻² with a 15% overhead. The 2D-CNN outperformed Volterra series and deep neural network approaches in long-haul D-band RoF systems by compensating for phase noise and nonlinear distortions via spatiotemporal feature integration, hierarchical feature extraction, and nonlinear modelling. Full article

Visible light communication (VLC) has become one important candidate technology for beyond 5G and even 6G wireless networks, mainly thanks to its abundant unregulated light spectrum resource and the ubiquitous deployment of light-emitting diodes (LED)-based illumination infrastructures. Due to the high directivity of VLC channel propagation, relay-based cooperative techniques have been introduced and explored to enhance the transmission performance of VLC links. Nevertheless, almost all current works are limited to scenarios adopting well-known Lambertian transmitter and relay, which fail to characterize the scenarios with distinctive non-Lambertian transmitter or relay. For filling this gap, in this article, relay-assisted VLC employing diverse non-Lambertian optical beam configurations is proposed. Unlike the conventional Lambertian transmitter and relay-based research paradigm, the presented scheme employs the commercially available non-Lambertian transmitter and relay to configure the cooperative VLC links. Numerical results illustrate that up to 40.63 dB SNR could be provided by the proposed non-Lambertian relay-assisted VLC scheme, compared with about a 34.22 dB signal-to-noise ratio (SNR) of the benchmark Lambertian configuration. Full article

Nowadays, underwater activities are becoming more and more important. As the number of underwater sensing devices grows rapidly, the amount of bandwidth needed also increases very quickly. Apart from underwater communication, direct communication across the water–air interface is also highly desirable. Air-to-water wireless transmission is crucial for sending control information or instructions from unmanned aerial vehicles (UAVs) or ground stations above the sea surface to autonomous underwater vehicles (AUVs). On the other hand, water-to-air wireless transmission is also required to transmit real-time information from AUVs or underwater sensor nodes to UAVs above the water surface. Previously, we successfully demonstrated a water-to-air optical camera-based OWC system, which is also known as optical camera communication (OCC). However, the reverse transmission (i.e., air-to-water) using OCC has not been analyzed. It is worth noting that in the water-to-air OCC system, since the camera is located in the air, the image of the light source is magnified due to diffraction. Hence, the pixel-per-symbol (PPS) decoding of the OCC pattern is easier. In the proposed air-to-water OCC system reported here, since the camera is located in the water, the image of the light source in the air will be diminished in size due to diffraction. Hence, the PPS decoding of the OCC pattern becomes more difficult. In this work, we propose and experimentally demonstrate a wide field-of-view (FOV) air-to-water OCC system using CUDA Deep-Neural-Network Long-Short-Term-Memory (CuDNNLSTM). Due to water turbulence and air turbulence affecting the AUV and UAV, a precise line-of-sight (LOS) between the AUV and the UAV is difficult to achieve. OCC can provide wide FOV without the need for precise optical alignment. Results revealed that the proposed air-to-water OCC system can support a transmission rate of 7.2 kbit/s through a still water surface, and 6.6 kbit/s through a wavy water surface; this satisfies the hard-decision forward error correction (HD-FEC) bit-error-rate (BER). Full article

As sensor technology integrates into modern life, diverse sensing devices have become essential for collecting critical data that enables human–machine interfaces such as autonomous vehicles and healthcare monitoring systems. However, the growing number of sensor devices places significant demands on network capacity, which is constrained by the limitations of radio frequency (RF) technology. RF-based communication faces challenges such as bandwidth congestion and interference in densely populated areas. To overcome these challenges, a combination of RF with free-space optical (FSO) communication is presented. FSO is a laser-based wireless solution that offers high data rates and secure communication, similar to fiber optics but without the need for physical cables. However, FSO is highly susceptible to atmospheric turbulence and conditions such as fog and smoke, which can degrade performance. By combining the strengths of both RF and FSO, a hybrid FSO/RF system can enhance network reliability, ensuring seamless communication in dynamic urban environments. This review examines hybrid FSO/RF systems, covering both theoretical models and real-world applications. Three categories of hybrid systems, namely hard switching, soft switching, and relay-based mechanisms, are proposed, with graphical models provided to improve understanding. In addition, multi-platform applications, including autonomous, unmanned aerial vehicles (UAVs), high-altitude platforms (HAPs), and satellites, are presented. Finally, the paper identifies key challenges and outlines future research directions for hybrid communication networks. Full article

This article presents the decision feedback equalizer (DFE), the maximum likelihood detection (MLD), and the radius-directed equalization (RDE) algorithms designed in MATLAB-R2018a to equalize the received signal in a dispersive optical link up to 120 km. DFE is essential for improving signal quality in several communication systems, including WiFi networks, cable modems, and long-term evolution (LTE) systems. Its capacity to mitigate inter-symbol interference (ISI) and rapidly adjust to channel variations renders it a flexible option for high-speed data transfer and wireless communications. Conversely, MLD is utilized in applications that require great precision and dependability, including multi-input–multi-output (MIMO) systems, satellite communications, and radar technology. The ability of MLD to optimize the probability of accurate symbol detection in complex, high-dimensional environments renders it crucial for systems where signal integrity and precision are critical. Lastly, RDE is implemented as an alternative algorithm to the CMA-based equalizer, utilizing the idea of adjusting the amplitude of the received distorted symbol so that its modulus is closer to the ideal value for that symbol. The algorithms are tested using a converged 5G mm-wave analog radio-over-fiber (A-RoF) system at 60 GHz. Their performance is measured regarding error vector magnitude (EVM) values before and after equalization for different optical fiber lengths and modulation formats (QPSK, 16-QAM, 64-QAM, and 128-QAM) and shows a clear performance improvement of the output signal. Moreover, the performance of the proposed algorithms is compared to three commonly used algorithms: the simple least mean square (LMS) algorithm, the constant modulus algorithm (CMA), and the adaptive median filtering (AMF), demonstrating superior results in both QPSK and 16-QAM and extending the transmission distance up to 120 km. DFE has a significant advantage over LMS and AMF in reducing the inter-symbol interference (ISI) in a dispersive channel by using previous decision feedback, resulting in quicker convergence and more precise equalization. MLD, on the other hand, is highly effective in improving detection accuracy by taking into account the probability of various symbol sequences achieving lower error rates and enhancing performance in advanced modulation schemes. RDE performs best for QPSK and 16-QAM constellations among all the other algorithms. Furthermore, DFE and MLD are particularly suitable for higher-order modulation formats like 64-QAM and 128-QAM, where accurate equalization and error detection are of utmost importance. The enhanced functionalities of DFE, RDE, and MLD in managing greater modulation orders and expanding transmission range highlight their efficacy in improving the performance and dependability of our system. Full article

This paper proposes a free-space time–frequency phase (TFP)-synchronization transmission architecture based on optoelectronic hybrid technology, addressing the high-precision TFP synchronization and high-speed communication requirements between mobile platforms in distributed collaborative positioning and other applications. The proposed scheme utilizes symmetric free-space optical (FSO) links to effectively suppress drift errors, integrating the high bandwidth of optical links and the high stability of microwave links, enabling one-to-many networking synchronization between mobile platforms. The system adopts optical wireless transmission technology based on pseudo-code regenerative ranging, integrating 1.5 Gbps high-speed data transmission with high-precision TFP-synchronization functionality. An experimental system consisting of a main station and two auxiliary stations was established in an outdoor mobile platform scenario. Experimental results show that while achieving high-speed communication, the frequency synchronization precision is 0.0131 ppb, frequency stability is in the order of 10⁻¹⁰@1 s, and phase synchronization precision is approximately 3.56°. The system achieves time synchronization precision at the picosecond level. The proposed technology is highly suitable for high-precision synchronization communication in scenarios lacking fiber-optic infrastructure, effectively fulfilling rigorous requirements in mobile platform applications such as distributed collaborative positioning. Full article

In the past two decades, there has been a tremendous increase in demand for services requiring a high bandwidth, a low latency, and high data rates, such as broadband internet services, video streaming, cloud computing, IoT devices, and mobile data services (5G and beyond). Optical wireless communication (OWC) technology, which is also envisioned for next-generation satellite networks using laser links, offers a promising solution to meet these demands. Establishing a line-of-sight (LOS) link and initiating communication in laser links is a challenging task. This process is managed by the acquisition, pointing, and tracking (APT) system, which must deal with the narrow beam divergence and the presence of satellite platform vibrations. These factors increase acquisition time and decrease acquisition probability. This study presents a framework for evaluating the acquisition time of four different scanning methods: spiral, raster, square spiral, and hexagonal, using a probabilistic approach. A satellite platform vibration model is used, and an algorithm for estimating its power spectral density is applied. Maximum likelihood estimation is employed to estimate key parameters from satellite vibrations to optimize scan parameters, such as the overlap factor and beam divergence. The simulation results show that selecting the scan path, overlap factor, and beam divergence based on an accurate estimation of satellite vibrations can prevent multiple scans of the uncertainty region, improve target satellite detection, and increase acquisition probability, given that the satellite vibration amplitudes are within the constraints imposed by the scan parameters. This study contributes to improving the acquisition process, which can, in turn, enhance the pointing and tracking phases of the APT system in laser links. Full article

Oil pollution in water bodies is a substantial environmental concern that poses severe risks to human health, aquatic ecosystems, and economic activities. Rising energy consumption and industrial activity have resulted in more oil spills, damaging long-term ecology. The aim of the review is to discuss problems, effects, and methods of monitoring and sensing oil pollution in water. Oil can destroy the aquatic habitat. Once oil gets into aquatic habitats, it changes both physically and chemically, depending on temperature, wind, and wave currents. If not promptly addressed, these processes have severe repercussions on the spread, persistence, and toxicity of oil. Effective monitoring and early identification of oil pollution are vital to limit environmental harm and permit timely reaction and cleanup activities. Three main categories define the three main methodologies of oil spill detection. Remote sensing utilizes satellite imaging and airborne surveillance to monitor large-scale oil spills and trace their migration across aquatic bodies. Accurate real-time detection is made possible by optical sensing, which uses fluorescence and infrared methods to identify and measure oil contamination based on its particular optical characteristics. Using sensor networks and Internet of Things (IoT) technologies, wireless sensing improves early detection and response capacity by the continuous automated monitoring of oil pollution in aquatic settings. In addition, the effectiveness of advanced artificial intelligence (AI) techniques, such as deep learning (DL) and machine learning (ML), in enhancing detection accuracy, predicting leak patterns, and optimizing response strategies, is investigated. This review assesses the advantages and limits of these detection technologies and offers future research directions to advance oil spill monitoring. The results help create more sustainable and efficient plans for controlling oil pollution and safeguarding aquatic habitats. Full article

The choice of constellations largely affects the performance of both wireless and optical communications. To address increasing capacity requirements, constellation shaping, especially for high-order modulations, is imperative in high-speed coherent communication systems. This paper, thus, proposes novel mutual information neural estimation (MINE)-based geometric, probabilistic, and joint constellation shaping schemes, i.e., the MINE-GCS, MINE-PCS, and MINE-JCS, to maximize mutual information (MI) via emerging deep learning (DL) techniques. Innovatively, we first introduce the MINE module to effectively estimate and maximize MI through backpropagation, without clear knowledge of the channel state information. Then, we train encoder and probability generator networks with different signal-to-noise ratios to optimize the distribution locations and probabilities of the points, respectively. Note that MINE transforms the precise MI calculation problem into a parameter optimization problem. Our MINE-based schemes only optimize the transmitter end, and avoid the computational and structural complexity in traditional shaping. All the designs were verified through simulations as having superior performance for MI, among which the MINE-JCS undoubtedly performed the best for additive white Gaussian noise, compared to the unshaped QAMs and even the end-to-end training and other DL-based joint shaping schemes. For example, the low-order 8-ary MINE-GCS could achieve an MI gain of about 0.1 bits/symbol compared to the unshaped Star-8QAM. It is worth emphasizing that our proposed schemes achieve a balance between implementation complexity and MI performance, and they are expected to be applied in various practical scenarios with different noise and fading levels in the future. Full article