Search Results (1,654)

Steady-state visual evoked potential (SSVEP) paradigms are widely used in brain–computer interface (BCI) systems due to their reliability and fast response. However, traditional static stimuli may reduce user comfort and engagement during prolonged use. This study proposes a dynamic stimulation paradigm combining periodic motion trajectories with speed control. Using four frequencies (6, 8.57, 10, 12 Hz) and three waveform patterns (sinusoidal, square, sawtooth), speed was modulated at 1/5, 1/10, and 1/20 of each frequency’s base rate. An offline experiment with 17 subjects showed that the low-speed sinusoidal and sawtooth trajectories matched the static accuracy (85.84% and 83.82%) while reducing cognitive workload by 22%. An online experiment with 12 subjects participating in a fruit-slicing game confirmed its practicality, achieving recognition accuracies above 82% and a System Usability Scale score of 75.96. These results indicate that coordinated trajectory and speed modulation preserves SSVEP signal quality and enhances user experience, offering a promising approach for fatigue-resistant, user-friendly BCI application. Full article

The Generalized Hough Transform (GHT) is a powerful method for rigid shape detection under rotation, scaling, translation, and partial occlusion conditions, but its four-dimensional accumulator incurs prohibitive computational and memory demands that prevent real-time deployment. To address this, we propose a framework that compresses the 4-D search space into a concise 2-D voting scheme by combining two-level sparse point-pair screening with an accelerated lookup. In the offline stage, template edges are extracted using an adaptive Canny operator with Otsu-determined thresholds, and gradient-direction differences for all point pairs are quantized to retain only those in the dominant bin, yielding rotation- and scale-invariant descriptors that populate a compact 2-D reference table. During the online stage, an adaptive grid selects only the highest-gradient pixels per cell as a base points, while a precomputed gradient-direction bucket table enables constant-time retrieval of compatible subpoints. Each valid base–subpoint pair is mapped to indices in the lookup table, and “fuzzy” votes are cast over a 3 × 3 neighborhood in the 2-D accumulator, whose global peak determines the object center. Evaluation on 200 real industrial parts—augmented to 1000 samples with noise, blur, occlusion, and nonlinear illumination—demonstrates that our method maintains over 90% localization accuracy, matches the classical GHT, and achieves a ten-fold speedup, outperforming IGHT and LI-GHT variants by 2–3×, thereby delivering a robust, real-time solution for industrial rigid object localization. Full article

This study examines how a visitor-centered approach enhances engagement, participation, and intangible heritage transmission to support cultural sustainability in ethnographic museums. We conducted online and on-site behavioral observations, questionnaire surveys, and in-depth interviews at the She Ethnic Minority Museum to identify gaps in current visitor experience design. We combined the Analytic Hierarchy Process (AHP) with the Contextual Model of Learning (POE) and Emotional Experience Theory (EET) to develop a hierarchical evaluation model. The model comprises one goal layer, three criterion layers (Experience, Participation, Transmission), and twelve sub-criteria, each evaluated across People, Object, and Environment dimensions. Quantitative weighting revealed that participation exerts the greatest influence, followed by transmission and experience. Findings indicate that targeted interventions promoting active participation most effectively foster emotional resonance and heritage transmission, while strategies supporting intergenerational engagement and immersive experiences also play a significant role. We recommend prioritizing small-scale, low-cost participatory initiatives and integrating online and offline community engagement to establish a participatory chain where engagement leads to meaningful experiences and sustained cultural transmission. These insights offer practical guidance for museum practitioners and policymakers seeking to enhance visitor experiences and ensure the long-term preservation and vibrancy of ethnic minority cultural heritage. Full article

Although product environmental information serves as an effective tool for promoting green consumption which is a critical lever for advancing broader sustainability goals, its varied impacts across product categories (durable goods vs. fast-moving consumer goods) and the underlying mechanisms remain unexplored. Grounded in the theory of consumption values (TCV), this study investigated the heterogeneous effects and mediating pathways of such information through a comparative analysis of representative products: organic milk (fast-moving consumer goods, FMCGs) and energy-efficient air conditioners (durable goods). The results show the following: (1) epistemic value, which exhibits the strongest association with product environmental information, demonstrates significantly different influence patterns between purchases of green durable goods and green FMCGs across both online and offline channels; (2) in the e-commerce context, green FMCG consumption is mainly driven by product environmental information through the mediating effect of conditional value. For green durable goods, product environmental information influences green consumption through multiple pathways including functional value, conditional value, and epistemic value. This study extends the classic theory of consumption values, and the results suggest that differentiated information strategies of emphasizing conditional value for FMCGs and integrating multi-dimensional values for durables can optimize green consumption promotion. Such strategies hold substantial potential to strengthen the green development of the omnichannel retailing sector, reinforcing its contribution to reaching sustainability objectives. Full article

Background/Objectives: This study aims to present a structured clinical workflow for offline adaptive Biology-guided Radiotherapy (BgRT) using the RefleXion X1 PET-linac system, addressing challenges introduced by inter-treatment anatomical and biological changes. Methods: We propose a decision tree offline adaptation framework based on real-time assessments of Activity Concentration (AC), Normalized Target Signal (NTS), and bounded dose-volume histogram (bDVH%) metrics. Three offline strategies were developed: (1) preemptive adaptation for minor changes, (2) partial re-simulation for moderate changes, and (3) full re-simulation for major anatomical or metabolic alterations. Two clinical cases demonstrating strategies 1 and 2 are presented. Results: The preemptive adaptation strategy was applied in a case with early tumor shrinkage, maintaining delivery parameters within acceptable limits while updating contours and dose distribution. In the partial re-Simulation case, significant changes in PET signal necessitated a same-day PET functional modeling session and plan re-optimization, effectively restoring safe deliverability. Both cases showed reduced target volumes and improved OAR sparing without additional patient visits or tracer injections. Conclusions: Offline adaptive workflows for BgRT provide practical solutions to address inter-fractional changes in tumor structure and function. These strategies can help maintain the safety and accuracy of BgRT delivery and support clinical adoption of PET-guided radiotherapy, paving the way for future online adaptive capabilities. Full article

The improvement of the partially integrated reinforcement learning-model predictive control (RL-MPC) system is developed in the paper by introducing the Deep Deterministic Policy Gradient (DDPG) and Twin Delayed Deep Deterministic Policy Gradient (TD3) algorithms. This framework differs from the traditional ones, which completely substitute the MPC prediction model; instead, an RL agent refines predictions through feedback correction and thus maintains interpretability while improving robustness. Most importantly, the study details two configuration paradigms: decoupled (offline policy application) and coupled (online policy update) and tests them for their effectiveness in trajectory tracking tasks within simulation and real-life experiments. A decoupled framework based on TD3 showed significant improvements in control performance compared to the rest of the implemented paradigms, especially concerning Integral of Time-weighted Absolute Error (ITAE) and mean absolute error (MAE). This work also illustrated the advantages of partial integration in balancing adaptability and stability, thus making it suitable for real-time applications in robotics. Full article

In this work, a model-based approach to inferentially obtaining information about the 3D fractal dimension of agglomerates produced in spray fluidized beds is presented. The method utilizes high-detail but scarce offline information from X-ray microcomputed tomography for establishing and training an inferential relationship with online information that is easy and fast to obtain. The online measurement information is the geometric roundness of the single agglomerate. To investigate the interpolation capability of the inferential approach, three different strategies are evaluated: correlation with individual process conditions; correlation with parameters adjusted to process parameters; and correlation with respect to a range of process conditions. It is shown that the approach incorporating process conditions provides sufficient accuracy over a wide range of conditions. The inferential evaluation of single agglomerate 3D fractal dimension is achieved in 5 ms on average. This enables the measurement of the distribution of 3D fractal dimension in an online setting for product quality monitoring and control. Several examples illustrate the capabilities of the approach, as well as current limitations. Full article

This study presents a hybrid adaptive control strategy that integrates genetic algorithm (GA) optimization with an adaptive neuro-fuzzy inference system (ANFIS) for precise thermal regulation of single-photon avalanche diodes (SPADs). To address the nonlinear and disturbance-sensitive dynamics of SPAD systems, a performance-oriented dataset is constructed through multi-scenario simulations using settling time, overshoot, and steady-state error as fitness metrics. The genetic algorithm (GA) facilitates broad exploration of the proportional–integral–derivative (PID) controller parameter space while ensuring control stability by discarding low-performing gain combinations. The resulting high-quality dataset is used to train the ANFIS model, enabling real-time, adaptive tuning of PID gains. Simulation results demonstrate that the proposed GA-ANFIS-PID controller significantly enhances dynamic response, robustness, and adaptability over both the conventional Ziegler–Nichols PID and GA-only PID schemes. The controller maintains stability under structural perturbations and abrupt thermal disturbances without the need for offline retuning, owing to the real-time inference capabilities of the ANFIS model. By combining global evolutionary optimization with intelligent online adaptation, this approach improves both accuracy and generalization, offering a practical and scalable solution for SPAD thermal management in demanding environments such as quantum communication, sensing, and single-photon detection platforms. Full article

To address the issue of coating accumulation model failure in unstable environments, this paper proposes a dynamic control method based on visual differential feedback. An image difference model is constructed through online image data modeling and real-time reference image feedback, enabling real-time correction of the coating accumulation model. Firstly, by combining the Arrhenius equation and the Hagen–Poiseuille equation, it is demonstrated that pressure regulation and temperature changes are equivalent under dataset establishment conditions, thereby reducing data collection costs. Secondly, online paint mist image acquisition and processing technology enables real-time modeling, overcoming the limitations of traditional offline methods. This approach reduces modeling time to less than 4 min, enhancing real-time parameter adjustability. Thirdly, an image difference model employing a CNN + MLP structure, combined with feature fusion and optimization strategies, achieved high prediction accuracy: R² > 0.999, RMSE < 0.79 kPa, and σ_e < 0.74 kPa on the test set for paint A; and R² > 0.997, RMSE < 0.67 kPa, and σ_e < 0.66 kPa on the test set for aviation paint B. The results show that the model can achieve good dynamic regulation for both types of typical aviation paint used in the experiment: high-viscosity polyurethane enamel (paint A, viscosity 22 s at 25 °C) and epoxy polyamide primer (paint B, viscosity 18 s at 25 °C). In summary, the image difference model can achieve dynamic regulation of the coating accumulation model in unstable environments, ensuring the stability of the coating accumulation model. This technology can be widely applied in industrial spraying scenarios with high requirements for coating uniformity and stability, especially in occasions with significant fluctuations in environmental parameters or complex process conditions, and has important engineering application value. Full article

Maximizing the power output of wind farms is critical for improving the economic viability and grid integration of renewable energy. Active wake control (AWC) strategies, such as yaw-based wake steering, offer significant potential for power generation increase but require predictive models that are both accurate and computationally efficient for real-time implementation. This paper proposes a data-driven observer to rapidly estimate the potential power gain achievable through AWC as a function of the ambient wind direction. The approach is rooted in Koopman operator theory, which allows a linear representation of nonlinear dynamics. Specifically, a model is developed using an Input–Output Extended Dynamic Mode Decomposition framework combined with Sparse Identification (IOEDMDSINDy). This method lifts the low-dimensional wind direction input into a high-dimensional space of observable functions and then employs iterative sparse regression to identify a minimal, interpretable linear model in this lifted space. By training on offline simulation data, the resulting observer serves as an ultra-fast surrogate model, capable of providing instantaneous predictions to inform online control decisions. The methodology is demonstrated and its performance is validated using two case studies: a 9-turbine and a 20-turbine wind farm. The results show that the observer accurately captures the complex, nonlinear relationship between wind direction and power gain, significantly outperforming simpler models. This work provides a key enabling technology for advanced, real-time wind farm control systems. Full article

Investigating the volatiles isolated from a commercial spirulina (Arthrospira platensis) dietary supplement by gas chromatography–olfactometry (GC–O) in combination with an aroma extract dilution analysis (AEDA) resulted in 29 odor events with flavor dilution (FD) factors between 8 and 2048. Identification experiments, including various offline and online fractionation approaches, led to the structure assignment of 30 odorants, among which the most potent were sweaty 2- and 3-methylbutanoic acid (FD 2048), roasty, earthy, shrimp-like 2-ethyl-3,5-dimethylpyrazine (FD 2048), vinegar-like acetic acid (FD 1024), and floral, violet-like β-ionone (FD 1024). Static headspace dilution analysis revealed sulfuric, cabbage-like methanethiol (FD factor ≥ 32) as an additional potent odorant. In summary, 31 important spirulina odorants were identified in this study, and 14 were reported for the first time as spirulina constituents. Our data will provide a basis for future odor optimization of spirulina-based food products. Full article

Contrastive learning is a machine learning technique in which models learn by contrasting similar and dissimilar data points. Its goal is to learn a representation of data in such a way that similar instances are close together in the representation space, while dissimilar instances are far apart. Our industrial use case focuses on a special case of contrastive learning called triplet learning. Building triplets with adequate difficulty is crucial to effective training convergence in such a setup. By combining online and offline mining techniques, we propose a method of mining hard triplets that is both performant and memory-inexpensive. Our experiments demonstrate that the method leads to improved identity pairing (which is the specific case of clustering) both on a real-life industry shoe dataset and on a generated benchmark one. Full article

A cooperative game negotiation strategy considering multiple constraints is proposed for distributed impulsive multi-spacecraft approach missions in the presence of defending spacecraft. It is a dual-stage decision-making method that includes offline trajectory planning and online distributed negotiation. In the trajectory planning stage, a relative orbital dynamics model is first established based on the Clohessy–Wiltshire (CW) equations, and the state transition equations for impulsive maneuvers are derived. Subsequently, a multi-objective optimization model is formulated based on the NSGA-II algorithm, utilizing a constraint dominance principle (CDP) to address various constraints and generate Pareto front solutions for each spacecraft. In the distributed negotiation stage, the negotiation strategy among spacecraft is modeled as a cooperative game. A potential function is constructed to further analyze the existence and global convergence of Nash equilibrium. Additionally, a simulated annealing negotiation strategy is developed to iteratively select the optimal comprehensive approach strategy from the Pareto fronts. Simulation results demonstrate that the proposed method effectively optimizes approach trajectories for multi-spacecraft under complex constraints. By leveraging inter-satellite iterative negotiation, the method converges to a Nash equilibrium. Additionally, the simulated annealing negotiation strategy enhances global search performance, avoiding entrapment in local optima. Finally, the effectiveness and robustness of the dual-stage decision-making method were further demonstrated through Monte Carlo simulations. Full article

Transcranial direct current stimulation (tDCS) modulates cortical excitability, thus inducing improvements in motor learning of simple tasks. In this study, we aimed to evaluate the effect of different tDCS conditions—anodal stimulation over the motor cortex (M1), anodal and cathodal stimulation over the prefrontal cortex (PFC), and sham—on the online and offline learning of a complex accuracy task (golf-putting) in novice golfers. Methods: A total of 40 young, healthy subjects (24 men, 16 women) without previous golf experience were randomly distributed in four groups receiving sham, anodal M1, anodal PFC or cathodal PFC tDCS. All subjects participated in two consecutive sessions. In the first session, they performed 15 blocks of 10 golf-putting along with tDCS stimulation. After 24 h, they performed the same task without tDCS. Results: Repeated measures ANOVA revealed a significant improvement in performance during the two consecutive golf-putting sessions regardless of the site and the stimulation conditions. Conclusion: Our findings suggest that tDCS over M1 or PFC does not confer additional benefits in the acquisition of complex, full-body motor skills such as golf-putting. Full article

Youth violence—the deliberate use of physical force or harm by young people between the ages of 10 and 24 to intimidate or cause harm to others, both online and offline—is a critical public health issue in the United States. Yet, successfully predicting future violent offenders is a complex and challenging task, as the question of why some youths resort to extreme violence while others refrain from it—despite facing similar risk factors—remains widely debated. This article highlights both risk and protective factors of youth violence through a socio-ecological lens to offer a comprehensive understanding of the multifaceted factors driving youth violence in the United States. To understand the interconnectedness between individual factors and the broader environments in which individuals are embedded, we outline the risk and protective factors related to youth violence across five socio-ecological levels: (1) individual, (2) interpersonal, (3) neighborhood, (4) cultural, and (5) life course. Approaching youth violence from a holistic lens offers a greater opportunity to mitigate contributing factors and to address the deleterious impacts of this complex issue. Practice and research implications are discussed. Full article