Search Results (19)

Reliable photovoltaic (PV) power forecasting based on deep learning typically requires large historical datasets to capture the high temporal and spatial variability of solar irradiance. However, in many real-world applications, data availability is limited to short observation periods, hindering the effective training of deep learning models. This paper investigates how sky image data augmentation techniques can improve the generalization capability of Convolutional Neural Networks (CNNs) trained under data scarcity. Three augmentation-based oversampling methods—SMOTE, Mixup-kNN, and Mixup-RP—are evaluated, along with two novel hybrid strategies that combine these methods in parallel and series configurations. The proposed framework is validated on two distinct PV power nowcasting case studies, in which the original sky image training datasets span less than one month. Experimental results show average performance improvements of up to 50% on external testing data when training the CNN on the augmented datasets compared to the original base datasets, demonstrating that accurate PV power nowcasting is feasible even under data-scarce conditions typical of newly installed PV systems, and highlighting the potential of data-efficient learning approaches for renewable energy applications. Full article

Accurate and reliable estimation of renewable energy generation is critical for modern power grid management, yet the inherent volatility and distinct physical drivers of multi-source renewables present significant modeling challenges. This paper proposes a unified deep learning framework for the concurrent estimation of power generation from solar, wind, and hydro sources. This methodology, termed nowcasting, utilizes real-time weather inputs to estimate immediate power generation. We introduce a hybrid spatio-temporal CNN-LSTM architecture that leverages a two-branch design to process both sequential weather data and static, plant-specific attributes in parallel. A key innovation of our approach is the use of a physics-informed Capacity Factor as the normalized target variable, which is customized for each energy source and notably employs a non-linear, S-shaped tanh-based power curve to model wind generation. To ensure high-fidelity spatial feature integration, a cKDTree algorithm was implemented to accurately match each power plant with its nearest corresponding weather data. To guarantee methodological rigor and prevent look-ahead bias, the model was trained and validated using a strict chronological data splitting strategy and was rigorously benchmarked against Linear Regression and XGBoost models. The framework demonstrated exceptional robustness on a large-scale dataset of over 1.5 million records spanning five European countries, achieving R-squared ($R^2$) values of 0.9967 for solar, 0.9993 for wind, and 0.9922 for hydro. While traditional ensemble models performed competitively on linear solar data, the proposed CNN-LSTM architecture demonstrated superior performance in capturing the complex, non-linear dynamics of wind energy, confirming its superiority in capturing intricate meteorological dependencies. This study validates the significant contribution of a spatio-temporal and physics-informed framework, establishing a foundational model for real-time energy assessment and enhanced grid sustainability. Full article

Surface solar irradiance (SSI) is a critical factor influencing the power generation capacity of photovoltaic (PV) power plants. Dynamic changes in cloud cover pose significant challenges to the accurate nowcasting of SSI, which in turn directly affects the reliability and stability of renewable energy systems. However, existing research often simplifies or overlooks changes in the optical and morphological characteristics of clouds, leading to considerable errors in SSI nowcasting. To address this limitation and improve the accuracy of ultra-short-term SSI forecasting, this study first forecasts changes in cloud optical thickness (COT) within the next 3 h based on a spatiotemporal long short-term memory model, since COT is the primary factor determining cloud shading effects, and then integrates the zenith and regional averages of COT, along with factors influencing direct solar radiation and scattered radiation, to achieve precise SSI nowcasting. To validate the proposed method, we apply it to the Albuquerque, New Mexico, United States (ABQ) site, where it yielded promising performance, with correlations between predicted and actual surface solar irradiance for the next 1 h, 2 h, and 3 h reaching 0.94, 0.92, and 0.92, respectively. The proposed method effectively captures the temporal trends and spatial patterns of cloud changes, avoiding simplifications of cloud movement trends or interference from non-cloud factors, thus providing a basis for power adjustments in solar power plants. Full article

As the solar share in energy generation is expanding globally, solar nowcasting is becoming increasingly important for the efficient and economical management of the power grid. This study leveraged the spatial context provided by all-sky images (ASI) in addition to the meteorological records for improved nowcasting of global, direct, and diffuse irradiance components. The proposed methodology consists of two branches for processing the multimodal data of ASIs and meteorological data. Due to its capability of understanding the overall characteristics of the image through self-attention, a vision transformer is utilized for the image branch while normal dense layers process the tabular meteorological data. The proposed architecture is compared against the baselines of the Ineichen clear sky model, a feedforward neural network (FFNN) where cloud coverage is computed from the ASIs by a simple color-channel threshold algorithm, and a hybrid of FFNN and U-Net model, which replaces the color threshold algorithm with fully convolutional layers for cloud segmentation. The models are trained, validated, and tested using the quality-assured ground-truth data collected in Ulaanbaatar, Mongolia, from May to August 2024, under one-minute intervals with a random split of 70%, 15%, and 15%. Our approach exhibits superior performance to baselines with a significantly lower mean absolute error (MAE) of 15–33 W/m² and root mean square error (RMSE) of 26–72 W/m², thus potentially aiding grid operators’ decision-making in real-time. Full article

Advancing the capabilities of earthquake nowcasting, the real-time forecasting of seismic activities, remains crucial for reducing casualties. This multifaceted challenge has recently gained attention within the deep learning domain, facilitated by the availability of extensive earthquake datasets. Despite significant advancements, the existing literature on earthquake nowcasting lacks comprehensive evaluations of pre-trained foundation models and modern deep learning architectures; each focuses on a different aspect of data, such as spatial relationships, temporal patterns, and multi-scale dependencies. This paper addresses the mentioned gap by analyzing different architectures and introducing two innovative approaches called Multi Foundation Quake and GNNCoder. We formulate earthquake nowcasting as a time series forecasting problem for the next 14 days within 0.1-degree spatial bins in Southern California. Earthquake time series are generated using the logarithm energy released by quakes, spanning 1986 to 2024. Our comprehensive evaluations demonstrate that our introduced models outperform other custom architectures by effectively capturing temporal-spatial relationships inherent in seismic data. The performance of existing foundation models varies significantly based on the pre-training datasets, emphasizing the need for careful dataset selection. However, we introduce a novel method, Multi Foundation Quake, that achieves the best overall performance by combining a bespoke pattern with Foundation model results handled as auxiliary streams. Full article

Thunderstorms can generate intense electrical activity, hail, and result in substantial economic and human losses. The development of very short-term forecasting tools (nowcasting) is essential to provide information to alert systems in order to mobilize most efficiently the population. However, the development of nowcasting tools depends on a better understanding of the physics and microphysics of clouds and lightning formation and evolution. In this context, the objectives of this study are: (a) to describe the environmental conditions that led to a genesis of a thunderstorm that produce hail on 7 January 2012, in the Metropolitan Area of São Paulo (MASP) during the CHUVA-Vale campaign, and (b) to evaluate the thunderstorm microphysical properties and vertical structure of electrical charge. Data from different sources were used: field campaign data, such as S-band radar, and 2- and 3-dimensional lightning networks, satellite data from the Geostationary Operational Environmental Satellite-13 (GOES-13), the Meteosat Second Generation (MSG), and reanalysis of the European Centre for Medium-Range Weather Forecasts Reanalysis v5 (ERA5). The thunderstorm developed in a region of low-pressure due to the presence of a near-surface inverted trough and moisture convergence, which favored convection. Convective Available Potential Energy (CAPE) of 1053.6 J kg⁻¹ at the start of the thunderstorm indicated that strong convective energy was present. Microphysical variables such as Vertically Integrated Liquid water content (VIL) and Vertically Integrated Ice (VII) showed peaks of 140 and 130 kg m⁻², respectively, before the hail reached the surface, followed by a decrease, indicating content removal from within the clouds to the ground surface. The thunderstorm charge structure evolved from a dipolar structure (with a negative center between 4 and 6 km and a positive center between 8 and 10 km) to a tripolar structure (negative center between 6 and 7.5 km) in the most intense phase. The first lightning peak (100 flashes in 5 min⁻¹) before the hail showed that there had been a lightning jump. The maximum lightning occurred around 18:17 UTC, with approximately 350 flashes 5 min⁻¹ with values higher than 4000 sources 500 m⁻¹ in 5 min⁻¹. Likewise, the vertical cross-sections indicated that the lightning occurred ahead of the thunderstorm’s displacement (maximum reflectivity), which could be useful in predicting these events. Full article

The Internet of Things (IoT) plays a critical role in remotely monitoring a wide variety of different application sectors, including agriculture, building, and energy. The wind turbine energy generator (WTEG) is a real-world application that can take advantage of IoT technologies, such as a low-cost weather station, where human activities can be significantly affected by enhancing the production of clean energy based on the known direction of the wind. Meanwhile, common weather stations are neither affordable nor customizable for specific applications. Moreover, due to weather forecast changes over time and location within the same city, it is not efficient to rely on a limited number of weather stations that may be located far away from a recipient’s location. Therefore, in this paper, we focus on presenting a low-cost weather station that relies on an artificial intelligence (AI) algorithm that can be distributed across a WTEG area with minimal cost. The proposed study measures multiple weather parameters, such as wind direction, wind velocity (WV), temperature, pressure, mean sea level, and relative humidity to provide current measurements to recipients and AI-based forecasts. In addition, the proposed study consists of several heterogeneous nodes and a controller for each station in a target area. The collected data can be transmitted through Bluetooth low energy (BLE). The experimental results reveal that the proposed study matches the standard of the National Meteorological Center (NMC), with a nowcast measurement of 95% accuracy for WV and 92% for wind direction (WD). Full article

Accurate solar radiation nowcasting models are critical for the integration of the increasing solar energy in power systems. This work explored the benefits obtained by the blending of four all-sky-imagers (ASI)-based models, two satellite-images-based models and a data-driven model. Two blending approaches (general and horizon) and two blending models (linear and random forest (RF)) were evaluated. The relative contribution of the different forecasting models in the blended-models-derived benefits was also explored. The study was conducted in Southern Spain; blending models provide one-minute resolution 90 min-ahead GHI and DNI forecasts. The results show that the general approach and the RF blending model present higher performance and provide enhanced forecasts. The improvement in rRMSE values obtained by model blending was up to 30% for GHI (40% for DNI), depending on the forecasting horizon. The greatest improvement was found at lead times between 15 and 30 min, and was negligible beyond 50 min. The results also show that blending models using only the data-driven model and the two satellite-images-based models (one using high resolution images and the other using low resolution images) perform similarly to blending models that used the ASI-based forecasts. Therefore, it was concluded that suitable model blending might prevent the use of expensive (and highly demanding, in terms of maintenance) ASI-based systems for point nowcasting. Full article

Challenges in utilising fossil fuels for generating energy call for the adoption of renewable energy sources. This study focuses on modelling and nowcasting optimal tilt angle(s) of solar energy harnessing using historical time series data collected from one of South Africa’s radiometric stations, USAid Venda station in Limpopo Province. In the study, we compared random forest (RF), K-nearest neighbours (KNN), and long short-term memory (LSTM) in nowcasting of optimum tilt angle. Gradient boosting (GB) is used as the benchmark model to compare the model’s predictive accuracy. The performance measures of mean absolute error (MAE), mean square error (MSE), root mean square error (RMSE) and $R^2$ were used, and the results showed LSTM to have the best performance in nowcasting optimum tilt angle compared to other models, followed by the RF and GB, whereas KNN was the worst-performing model. Full article

Solar forecasting constitutes a critical tool for operating, producing and storing generated power from solar farms. In the framework of the International Energy Agency’s Photovoltaic Power Systems Program Task 16, the solar irradiance nowcast algorithms, based on five all-sky imagers (ASIs), are used to investigate the feasibility of ASIs to foresee ramp events. ASIs 1–2 and ASIs 3–5 can capture the true ramp events by 26.0–51.0% and 49.0–92.0% of the cases, respectively. ASIs 1–2 provided the lowest (<10.0%) falsely documented ramp events while ASIs 3–5 recorded false ramp events up to 85.0%. On the other hand, ASIs 3–5 revealed the lowest falsely documented no ramp events (8.0–51.0%). ASIs 1–2 are developed to provide spatial solar irradiance forecasts and have been delimited only to a small area for the purposes of this benchmark, which penalizes these approaches. These findings show that ASI-based nowcasts could be considered as a valuable tool for predicting solar irradiance ramp events for a variety of solar energy technologies. The combination of physical and deep learning-based methods is identified as a potential approach to further improve the ramp event forecasts. Full article

In the following work, the design of an LSTM-type neural network model for wind speed and power generation nowcasting, with measurements taken every 10 min and for up to two hours, is presented. For this study, the wind speed measurements were taken every 10 min at different heights above the ground by the measurement tower located in Los Cocos in the province of Holguín (Cuba), where the wind farms Gibara I and II are located. The real data were complemented with the wind speed numerical hourly forecasts from SisPI. The data covered the period between 1 February 2019 and 31 January 2020, that is, one year of measurements. Several LSTM models were built and evaluated, both considering the measurements alone and combining the measurements with the forecasts generated by SisPI. The results suggest that the constructed models perform better than other more traditional statistical models and other neural network models used in the country for similar purposes. Full article

New trends of Machine learning models are able to nowcast power generation overtaking the formulation-based standards. In this work, the capabilities of deep learning to predict energy generation over three different areas and deployments in the world are discussed. To this end, transfer learning from deep learning models to nowcast output power generation in photovoltaic systems is analyzed. First, data from three photovoltaic systems in different regions of Spain, Italy and India are unified under a common segmentation stage. Next, pretrained and non-pretrained models are evaluated in the same and different regions to analyze the transfer of knowledge between different deployments and areas. The use of pretrained models provides encouraging results which can be optimized with rearward learning of local data, providing more accurate models. Full article

The evolution of lightning generation and extinction is a nonlinear and complex process, and the nowcasting results based on extrapolation and numerical models largely differ from the real situation. In this study, a multiple-input and multiple-output lightning nowcasting model, namely Convolutional Long- and Short-Term Memory Lightning Forecast Net (CLSTM-LFN), is constructed to improve the lightning nowcasting results from 0 to 3 h based on video prediction methods in deep learning. The input variables to CLSTM-LFN include historical lightning occurrence frequency and physical variables significantly related to lightning occurrence from numerical model products, which are merged with each other to provide effective information for lightning nowcasting in time and space. The results of batch forecasting tests show that CLSTM-LFN can achieve effective forecasts of 0 to 3 h lightning occurrence areas, and the nowcasting results are better than those of the traditional lightning parameterization scheme and only inputting a single data source. After analyzing the importance of input variables, the results show that the role of numerical model products increases significantly with increasing forecast time, and the relative importance of convective available potential energy is significantly larger than that of other physical variables. Full article

The wildfires over the central Indian Himalayan region have attracted the significant attention of environmental scientists. Despite their major and disastrous effects on the environment and air quality, studies on the forest fires’ impacts from a renewable energy point of view are lacking for this region. Therefore, for the first time, we examine the impact of massive forest fires on the reduction in solar energy production over the Indian subcontinent via remote sensing techniques. For this purpose, we used data from the Moderate Resolution Imaging Spectroradiometer (MODIS), the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIPSO), the Satellite Application Facility on support to Nowcasting/Very Short-Range Forecasting Meteosat Second Generation (SAFNWC/MSG) in conjunction with radiative transfer model (RTM) simulation, in addition to 1-day aerosol forecasts from the Copernicus Atmosphere Monitoring Service (CAMS). The energy production during the first quarter of 2021 was found to reach 650 kWh/m² and the revenue generated was about INR (Indian rupee) 79.5 million. During the study period, the total attenuation due to aerosols and clouds was estimated to be 116 and 63 kWh/m² for global and beam horizontal irradiance (GHI and BHI), respectively. The financial loss due to the presence of aerosols was found to be INR 8 million, with the corresponding loss due to clouds reaching INR 14 million for the total Indian solar plant’s capacity potential (40 GW). This analysis of daily energy and financial losses can help the grid operators in planning and scheduling power generation and supply during the period of fires. The findings of the present study will drastically increase the awareness among the decision makers in India about the indirect effects of forest fires on renewable energy production, and help promote the reduction in carbon emissions and greenhouse gases in the air, along with the increase in mitigation processes and policies. Full article

Microgrids represent a flexible way to integrate renewable energy sources with programmable generators and storage systems. In this regard, a synergic integration of those sources is crucial to minimize the operating cost of the microgrid by efficient storage management and generation scheduling. The forecasts of renewable generation can be used to attain optimal management of the controllable units by predictive optimization algorithms. This paper introduces the implementation of a two-layer hierarchical energy management system for islanded photovoltaic microgrids. The first layer evaluates the optimal unit commitment, according to the photovoltaic forecasts, while the second layer deals with the power-sharing in real time, following as close as possible the daily schedule provided by the upper layer while balancing the forecast errors. The energy management system is experimentally tested at the Multi-Good MicroGrid Laboratory under three different photovoltaic forecast models: (i) day-ahead model, (ii) intraday corrections and (iii) nowcasting technique. The experimental study demonstrates the capability of the proposed management system to operate an islanded microgrid in safe conditions, even with inaccurate day-ahead photovoltaic forecasts. Full article