Search Results (60)

Although phage@nanozymes have proven to be a rapid, precise, and cost-effective method for detecting pathogens in food, the basis of phage and nanozyme selection remains poorly understood. In this study, a novel colourimetric biosensor utilising the temperate phage SapYZUs891 and an Fe/Mn-MOF nanozyme was constructed and assessed for its efficacy in detecting Staphylococcus aureus in food products. Notably, SapYZUs891 exhibited a high titre, broad host range, and strong pH and thermal stability. Moreover, the bimetallic Fe/Mn-MOF nanozyme exhibited an enhanced oxidase-mimicking ability, greater affinity, and a higher reaction rate. The biosensor had a detection time of 19 min, a detection limit of 69 CFU/mL, and a recovery rate between 92.52% and 121.48%, signifying its high reliability and accuracy in identifying S. aureus. This sensor distinguishes between viable and non-viable bacteria and demonstrates resistance to interferent bacterial and food compounds, likely attributable to the particular receptor-binding proteins of SapYZUs891 that bind to the teichoic acid wall on the S. aureus. These results indicated that the SapYZUs891@Fe/Mn-MOF is suitable for the rapid visual assessment of S. aureus. Moreover, the highly sensitive and specific detection system holds significant potential for extended application in on-site screening of S. aureus contamination within food processing environments. Full article

The growing global demand for rapid, sensitive, and cost-effective food safety monitoring has driven the development of nanozyme-based biosensors as alternatives to natural enzyme-based methods. Among various nanozymes, bimetallic gold–platinum (AuPt) nanozymes show superior catalytic performance compared to monometallic and other Au-based bimetallic hybrids. This is due to their synergistic colorimetric, catalytic, geometric, and ensemble properties. This review systematically evaluates AuPt nanozymes in food safety applications, focusing on their synthesis, structural design, and practical uses. Various structural types are highlighted, including plain, magnetic, porous nanomaterial-labeled, and flexible nanomaterial-loaded AuPt hybrids. Key synthesis methods such as seed-mediated growth and one-pot procedures with different reducing agents are summarized. Detection modes covered include colorimetric, electrochemical, and multimodal sensing, demonstrating efficient detection of important food contaminants. Key innovations include core–shell designs for enhanced catalytic activity, new synthesis strategies for improved structural control, and combined detection modes to increase reliability and reduce false positives. Challenges and future opportunities are discussed, such as standardizing synthesis protocols, scaling up production, and integration with advanced sensing platforms. This review aims to accelerate the translation of AuPt nanozyme technology into practical food safety monitoring solutions that improve food security and public health. Full article

In response to the ongoing challenges associated with natural enzymes, their high production costs, low stability and limited functionality; nanozymes have rapidly emerged as versatile alternative. Such nanocatalysts, based on nanomaterials and nanostructures, offer remarkable tunability of physicochemical properties and excellent durability, and adapt themselves effectively to the requirements of modern biotechnological applications. This review article aims to provide a comprehensive overview of recent advances in the use of naturally occurring iron oxide nanoparticles, produced by magnetotactic bacteria, and to highlight their emerging role as key elements in the development of the new generation of nano-guided biosensors. It provides a comprehensive and systematic analysis of publications in the Web of Science database between 2022 and August 2025, conducted in accordance with PRISMA guidelines. The aim was to assess the current state of the art and identify knowledge gaps in the exploration and application of magnetotactic bacteria as natural and sustainable sources in the design of next-generation biosensors. The natural nanoparticles, formed through biological processes, represent a unique and sustainable alternative to synthetic nanoparticles, offering naturally mimetic enzymatic activity, high biocompatibility, and exceptional stability. This approach opens up revolutionary perspectives in the field of biosensors, proposing a new class of functional materials, iron nanoparticles of biological origin, capable of fundamentally changing the performance, sustainability and reliability of future nanoenzymatic sensing platforms. Full article

The integration of deep learning (DL) and nanozyme-based biosensing has emerged as a transformative strategy for next-generation medical diagnostics. This review explores how DL architectures enhance nanozyme design, functional optimization, and predictive modeling by elucidating catalytic mechanisms such as dual-atom active sites and substrate-surface interactions. Key applications include disease biomarker detection, medical imaging enhancement, and point-of-care diagnostics aligned with the ASSURED criteria. In clinical contexts, advances such as wearable biosensors and smart diagnostic platforms leverage DL for real-time signal processing, pattern recognition, and adaptive decision-making. Despite significant progress, challenges remain—particularly the need for standardized biomedical datasets, improved model robustness across diverse populations, and the clinical translation of artificial intelligence (AI)-enhanced nanozyme systems. Future directions include integration with the Internet of Medical Things, personalized medicine frameworks, and sustainable sensor development. The convergence of nanozymes and DL offers unprecedented opportunities to advance intelligent biosensing and reshape precision diagnostics in healthcare. Full article

Enzyme-based biosensors have emerged as a transformative technology, leveraging the specificity and catalytic efficiency of enzymes across various domains, including medical diagnostics, environmental monitoring, food safety, and industrial processes. These biosensors integrate biological recognition elements with advanced transduction mechanisms to provide highly sensitive, selective, and portable solutions for real-time analysis. This review explores the key components, detection mechanisms, applications, and future trends in enzyme-based biosensors. Artificial enzymes, such as nanozymes, play a crucial role in enhancing enzyme-based biosensors by mimicking natural enzyme activity while offering improved stability, cost-effectiveness, and scalability. Their integration can significantly boost sensor performance by increasing the catalytic efficiency and durability. Additionally, lab-on-a-chip and microfluidic devices enable the miniaturization of biosensors, allowing for the development of compact, portable devices that require minimal sample volumes for complex diagnostic tests. The functionality of enzyme-based biosensors is built on three essential components: enzymes as biocatalysts, transducers, and immobilization techniques. Enzymes serve as the biological recognition elements, catalyzing specific reactions with target molecules to produce detectable signals. Transducers, including electrochemical, optical, thermal, and mass-sensitive types, convert these biochemical reactions into measurable outputs. Effective immobilization strategies, such as physical adsorption, covalent bonding, and entrapment, enhance the enzyme stability and reusability, enabling consistent performance. In medical diagnostics, they are widely used for glucose monitoring, cholesterol detection, and biomarker identification. Environmental monitoring benefits from these biosensors by detecting pollutants like pesticides, heavy metals, and nerve agents. The food industry employs them for quality control and contamination monitoring. Their advantages include high sensitivity, rapid response times, cost-effectiveness, and adaptability to field applications. Enzyme-based biosensors face challenges such as enzyme instability, interference from biological matrices, and limited operational lifespans. Addressing these issues involves innovations like the use of synthetic enzymes, advanced immobilization techniques, and the integration of nanomaterials, such as graphene and carbon nanotubes. These advancements enhance the enzyme stability, improve sensitivity, and reduce detection limits, making the technology more robust and scalable. Full article

Amperometric biosensors, due to their high sensitivity, fast response time, low cost, simple control, miniaturization capabilities, and other advantages, are receiving significant attention in the field of medical diagnostics, especially in monitoring blood glucose levels in diabetic patients. In this study, an amperometric glucose biosensor based on immobilized enzyme glucose oxidase (GOx) and bimetallic platinum cobalt (PtCo) nanoparticles was developed. The PtCo nanoparticles, deposited on a graphite rod electrode, exhibited peroxidase-like catalytic properties and were able to electrocatalyze the reduction of H₂O₂. After immobilization of the GOx, an amperometric signal generated by the biosensor was directly proportional to the glucose concentration in the range of 0.04–2.18 mM. The biosensor demonstrated a sensitivity of 19.38 μA mM⁻¹ cm⁻², with a detection limit of 0.021 mM and a quantification limit of 0.064 mM. In addition to this analytical performance, the biosensor exhibited excellent repeatability (relative standard deviation (RSD) was 4.90%); operational and storage stability, retaining 98.93% and 95.33% of its initial response after 26 cycles of glucose detection and over a 14-day period, respectively; and anti-interference ability against electroactive species, as well as exceptional selectivity for glucose and satisfactory reproducibility (RSD 8.90%). Additionally, the biosensor was able to detect glucose levels in blood serum with a high accuracy (RSD 5.89%), indicating potential suitability for glucose determination in real samples. Full article

Metal–organic framework (MOF)-based nanozymes represent a groundbreaking frontier in advanced microbial biosensing, offering unparalleled catalytic precision and structural tunability to mimic natural enzymes with superior stability and specificity. By engineering the structural features and forming composites, MOFs are precisely tailored to amplify nanozymatic activity, enabling the highly sensitive, rapid, and cost-effective detection of a broad spectrum of microbial pathogens critical to biomedical diagnostics and environmental monitoring. These advanced biosensors surpass traditional enzyme systems in robustness and reusability, integrating seamlessly with smart diagnostic platforms for real-time, on-site microbial identification. This review highlights cutting-edge developments in MOF nanozyme design, composite engineering, and signal transduction integration while addressing pivotal challenges such as biocompatibility, complex matrix interference, and scalable manufacturing. Looking ahead, the convergence of multifunctional MOF nanozymes with portable technologies and optimized in vivo performance will drive transformative breakthroughs in early disease detection, antimicrobial resistance surveillance, and environmental pathogen control, establishing a new paradigm in next-generation smart biosensing. Full article

Nanozymes constitute a rapidly advancing frontier in scientific research, attracting widespread international interest, particularly for their role in facilitating cascade reactions. Despite their initial discovery a few years ago, significant hurdles persist in optimizing their catalytic performance and substrate specificity—challenges that are especially critical in the context of biomedical diagnostics. Within this domain, nitrogen-containing graphene oxide-based nanozymes exhibiting peroxidase-mimicking activity have emerged as particularly promising candidates, owing to the exceptional electrical conductivity, mechanical flexibility, and structural resilience of reduced graphene oxide-based materials. Intensive efforts have been devoted to engineering graphene oxide structures to enhance their peroxidase-like functionality. Nonetheless, the practical implementation of such nanozymes remains under active investigation and demands further refinement. This review synthesizes the current developments in nitrogen heteroatom-containing graphene oxide nanozymes and their derivative nanozymes, emphasizing recent breakthroughs and biomedical applications. It concludes by exploring prospective directions and the broader potential of these materials in the biomedical landscape. Full article

Colorimetric-based biosensors are practical detection devices that can detect the presence and concentration of biomarkers through simple color changes. Conventional laboratory-based tests are highly sensitive but require long processing times and expensive equipment, which makes them difficult to apply for on-site diagnostics. In contrast, the colorimetric method offers advantages for point-of-care testing and real-time monitoring due to its flexibility, simple operation, rapid results, and versatility across many applications. In order to enhance the color change reactions in colorimetric techniques, functional nanomaterials are often integrated due to their desirable intrinsic properties. In this review, the working principles of nanomaterial-based detection strategies in colorimetric systems are introduced. In addition, current signal amplification methods for colorimetric biosensors are comprehensively outlined and evaluated. Finally, the latest trends in artificial intelligence (AI) and machine learning integration into colorimetric-based biosensors, including their potential for technological advancements in the near future, are discussed. Future research is expected to develop highly sensitive and multifunctional colorimetric methods, which will serve as powerful alternatives for point-of-care testing and self-testing. Full article

Artificial enzymes or nanozymes (NZs) are gaining significant attention in biotechnology due to their stability and cost-effectiveness. NZs can offer several advantages over natural enzymes, such as enhanced stability under harsh conditions, longer shelf life, and reduced production costs. The booming interest in NZs is likely to continue as their potential applications expand. In our previous studies, we reported the “green” synthesis of copper hexacyanoferrate (gCuHCF) using the oxidoreductase flavocytochrome b₂ (Fcb₂). Organic–inorganic micro-nanoparticles were characterized in detail, including their structure, composition, catalytic activity, and electron-mediator properties. An SEM analysis revealed that gCuHCF possesses a flower-like structure well-suited for concentrating and stabilizing Fcb₂. As an effective peroxidase (PO) mimic, gCuHCF has been successfully employed for H₂O₂ detection in amperometric sensors and in several oxidase-based biosensors. In the current study, we demonstrated the uniqueness of gCuHCF that lies in its multifunctionality, serving as a PO mimic, a chemosensor for ammonium ions, a biosensor for L-lactate, and exhibiting perovskite-like properties. This exceptional ability of gCuHCF to enhance fluorescence under blue light irradiation is being reported for the first time. Using gCuHCF as a PO-like NZ, novel oxidase-based sensors were developed, including an optical biosensor for L-arginine analysis and electrochemical biosensors for methanol and glycerol determination. Thus, gCuHCF, synthesized via Fcb₂, presents a promising platform for the development of amperometric and optical biosensors, bioreactors, biofuel cells, solar cells, and other advanced devices. The innovative approach of utilizing biocatalysts for nanoparticle synthesis highlights a groundbreaking direction in materials science and biotechnology. Full article

With the growing interest in nucleic acids and nanozymes, nucleic acid nanozymes (NANs) have emerged as a promising alternative to traditional enzyme catalysts, combining the advantages of nucleic acids and nanomaterials, and are widely applied in the field of biosensing. This review provides a comprehensive overview of recent studies on NAN-based biosensors. It classifies NANs based on six distinct enzymatic activities: peroxidase-like, oxidase-like, catalase-like, superoxide dismutase-like, laccase-like, and glucose oxidase-like. This review emphasizes how the catalytic activity of nanozymes is significantly influenced by the properties of nucleic acids and explores the regulatory mechanisms governing the catalytic activity of NANs. Additionally, it systematically reviews important research progress on NANs in colorimetric, fluorescent, electrochemical, SERS, and chemiluminescent sensors, offering insights into the development of the NAN field and biosensor applications. Full article

The operating principle of a fuel cell is attracting increasing attention in the development of self-powered electrochemical sensors (SPESs). In this type of sensor, the chemical energy of the analyzed substance is converted into electrical energy in a galvanic cell through spontaneous electrochemical reactions, directly generating an analytical signal. Unlike conventional (amperometric, voltammetric, and impedimetric) sensors, no external energy in the form of an applied potential is required for the redox detection reactions to occur. SPESs therefore have several important advantages over conventional electrochemical sensors. They do not require a power supply and modulation system, which saves energy and costs. The devices also offer greater simplicity and are therefore more compatible for applications in wearable sensor devices as well as in vivo and in situ use. Due to the dual redox properties of hydrogen peroxide, it is possible to develop membraneless fuel cells and fuel-cell-based hydrogen peroxide SPESs, in which hydrogen peroxide in the analyzed sample is used as the only source of energy, as both an oxidant and a reductant (fuel). This also suppresses the dependence of the devices on the availability of oxygen. Electrode catalyst materials for different hydrogen peroxide reaction pathways at the cathode and the anode in a one-compartment cell are a key technology for the implementation and characteristics of hydrogen peroxide SPESs. This article provides an overview of the operating principle and designs of H₂O₂–H₂O₂ fuel cells and H₂O₂ fuel-cell-based SPESs, focusing on biomimetic and nanozyme catalysts, and highlights recent innovations and prospects of hydrogen-peroxide-based SPESs for (bio)electrochemical analysis. Full article

Prussian blue nanoparticles (PBNPs) have been identified as a promising candidate for biomimetic peroxidase (POD)-like activity, specifically due to the metal centres (Fe³⁺/Fe²⁺) of Prussian blue (PB), which have the potential to function as catalytically active centres. The decoration of PBNPs with desired functional polymers (such as amino- or carboxylate-based) primarily facilitates the subsequent linkage of biomolecules to the nanoparticles for their use in biosensor applications. Thus, the elucidation of the catalytic POD mimicry of these systems is of significant scientific interest but has not been investigated in depth yet. In this report, we studied a series of poly(ethyleneimine) (PEI)-mediated PBNPs (PB/PEI NPs) prepared using various synthesis protocols. The resulting range of particles with varying size (~19–92 nm) and shape combinations were characterised in order to gain insights into their physicochemical properties. The POD-like nanozyme activity of these nanoparticles was then investigated by utilising a 3,3′,5,5′-tetramethylbenzidine (TMB)/H₂O₂ system, with the catalytic performance of the natural enzyme horseradish peroxidase (HRP) serving as a point of comparison. It was shown that most PB/PEI NPs displayed higher catalytic activity than the PBNPs, with higher activity observed in particles of smaller size, higher Fe content, and higher Fe²⁺/Fe³⁺ ratio. Furthermore, the nanoparticles demonstrated enhanced chemical stability in the presence of acid, sodium azide, or high concentrations of H₂O₂ when compared to HRP, confirming the viability of PB/PEI NPs as a promising nanozymatic material. This study disseminates fundamental knowledge on PB/PEI NPs and their POD-like activities, which will facilitate the selection of an appropriate particle type for future biosensor applications. Full article

Detecting circulating tumor cells has exhibited great significance in treating cancers since its concentration is an index strongly associated with the development and transfer of the tumor. However, the present commercial method for CTC detection is still expensive, because special antibodies and complicated devices must be used for cell separation and imaging. Hence, it is quite necessary to apply alternative materials and methods to decrease the cost of CTC detection. In this article, we coated a cellulose acetate membrane with nanoparticles formed by the polymerization of melamine and furfural, creating a surface with nanoscale roughness for the highly efficient capture of the sparse CTCs in a blood sample. Subsequently, the CTCs on the surface can be quantitatively detected by colorimetry with the aid of a COF-based nanozyme. The detection limit (LOD) can be as low as 3 cells/mL, which is the lowest LOD among the colorimetric methods to our knowledge. Considering the low cost of fabricating the membrane for CTC capture and the robustness of nanozymes compared with natural enzymes, this CTC detection approach displays great potential to decrease the financial burden of commercial CTC detection. Full article