Search Results (4,560)

The development of high-performance electrode materials with controlled morphology remains a key challenge for advancing supercapacitor technologies. In this study, polyethylene glycol (PEG)-assisted hydrothermal synthesis was employed to engineer NiCo₂S₄ nanostructures with controlled morphology for enhanced supercapacitor performance. The influence of PEG concentration on nucleation behavior, structural evolution, and electrochemical characteristics was systematically investigated. The optimized NiCo₂S₄ electrode synthesized with 0.2% PEG (NiCoS-P2) exhibited a hierarchical flower-like nanosheet architecture with reduced agglomeration and improved electrochemically accessible surface area. As a result, the electrode delivered a high areal capacitance of 13.689 F/cm² (specific capacitance of 6845 F/g) at 5 mA/cm², along with excellent rate capability and superior cycling stability, retaining 84.16% capacitance after 12,000 cycles. Electrochemical analysis revealed that the charge storage process is predominantly diffusion-controlled with enhanced ion transport kinetics. Furthermore, an asymmetric supercapacitor device assembled using NiCoS-P2 as the positive electrode and activated carbon as the negative electrode demonstrated a wide operating voltage of 1.5 V, delivering an areal capacitance of 0.409 F/cm² (specific capacitance of 204.5 F/g), an energy density of 0.128 mWh/cm², and a power density of 2.99 mW/cm². The device also exhibited excellent long-term stability with 85.3% capacitance retention after 7000 cycles. This work highlights the effectiveness of polymer-assisted structural engineering in optimizing transition metal sulfide electrodes for advanced energy storage applications.: Full article

Nanotechnology has emerged as a key driver in radioisotope batteries, which offer unique advantages for long-term, maintenance-free energy supply in deep space exploration, medical implants, and nuclear waste utilization. This review summarizes recent progress in applying nanomaterials and nanostructures to overcome the limitations of nuclear batteries, including low energy conversion efficiency and poor stability. The main content focuses on the three primary conversion mechanisms of thermoelectric, radio-voltaic, and radio-photovoltaic batteries, discussing high-performance thermoelectric nanomaterials such as SiGe alloys, wide-bandgap semiconductors including diamond and SiC for enhanced carrier collection, and nanoscale radionuclide ources to mitigate self-absorption losses. This review further elaborates on how nanostructure regulation and interface engineering have significantly improved carrier collection efficiency and device stability. These advances have enabled notable civilian applications, such as the BV100 and “Zhulong No.1” nuclear batteries. Despite this progress, challenges remain in ensuring long-term material stability under extreme environments, maintaining performance consistency during macroscopic device integration, and addressing the high fabrication costs. The review concludes by outlining future research directions, including the development of novel nanomaterial systems, innovative nanostructure designs, scalable manufacturing processes, and enhanced device stability and safety, to further advance next-generation radioisotope batteries. Full article

Water electrolysis has emerged as a strategically appealing route for the sustainable production of green hydrogen (H₂) via the hydrogen evolution reaction (HER), though the sluggish kinetics of the oxygen evolution reaction (OER) remains a bottleneck hindering large-scale practical applications. In this regard, an attractive solution is offered by the integration of the ethanol oxidation reaction (EOR) into hybrid water-splitting systems, favorably reducing anodic overpotentials. Nonetheless, an open challenge is related to the fabrication of eco-friendly and economically viable catalysts free from noble metals, combining efficiency and stability. Herein, we explore nickel-oxide-based nanostructures grown onto porous Ni foam scaffolds by a scalable hydrothermal (HT) approach as EOR electrocatalysts. Material properties arising from modulation of the sole HT growth time are investigated by complementary structural, microscopic, and spectroscopic techniques. Electrochemical tests demonstrate good durability and very attractive EOR performances, mainly influenced by the morphology and the NiOOH surface content of the target systems. Overall, the present work advances an attractive route to transition-metal-based electrocatalysts for efficient alcohol-oxidation-assisted water electrolysis. Full article

Biodegradable poly(lactide)/poly(ε-caprolactone) (PLA/PCL) systems functionalized with TiO₂–SiO₂ were synthesized via in situ ring-opening polymerization of a eutectic L-lactide/ε-caprolactone system. This work introduces a TiO₂–SiO₂ composite with a dual function, acting as a catalytic initiator that governs polymerization and microstructure, while simultaneously serving as a reinforcing and photocatalytic phase. The system exhibits high polymerization efficiency, reaching conversions up to 99% with low filler loadings (0.1–1.0 wt%). Structural analyses confirm polymer formation and reveal modifications in ester groups associated with coordination-driven mechanisms. Notably, the presence of TiO₂–SiO₂ promotes increased PLA tacticity, directly influencing mechanical performance. The resulting materials show enhanced tensile strength (~250,000 Pa) and Young’s modulus (1.5–2.0 MPa) compared to conventional systems. In addition, excellent photocatalytic activity was achieved, with up to 99.7% degradation of methyl orange. These findings demonstrate a synergistic strategy to simultaneously control polymer structure and functionality, positioning PLA/PCL–TiO₂–SiO₂ systems as promising multifunctional materials for environmental applications. Full article

The corrosion protection of copper in acidic urban rain environments was studied using self-assembled hydrophobic layers (SAHLs) based on stearic acid (SA), with and without rosehip seed oil (RH). The limited durability of fatty acid-based self-assembled layers under acidic conditions was addressed by correlating surface wettability, morphology, and electrochemical behaviour. Contact angle and SEM analyses showed that SA alone forms a moderately hydrophobic but structurally irregular layer, whereas the addition of 2.0 wt.% RH produces a hierarchical micro/nanostructure with near-superhydrophobic characteristics (CA ≈ 149°). Electrochemical measurements in simulated acid rain solutions (pH 5, 3, and 1) revealed a strong pH dependence of protective performance. While SA-derived layers provided effective protection at pH 5, they deteriorated at lower pH due to protonation of carboxylate anchoring groups and electrolyte ingress. In contrast, SAHLs containing 2.0 wt.% RH maintained polarisation resistance in the MΩ cm² range and inhibition efficiencies above 99% at pH 3, and remained effective even at pH 1. Long-term EIS results indicate a predominantly diffusion-controlled, barrier-type inhibition mechanism associated with defects sealing and interfacial reorganisation. Notably, the rosehip seed oil used is a commercially available, bio-based material with expired shelf life, highlighting the potential of waste-derived resources for sustainable corrosion protection. Full article

Nanophotonics, an interdisciplinary field merging nanotechnology and photonics, has enabled transformative advancements across diverse sectors, including green energy, biomedicine, and optical computing. This review comprehensively examines recent progress in nanophotonic principles and applications, highlighting key innovations in material design, device engineering, and system integration. In renewable energy, nanophotonics allows the use of light-trapping nanostructures and spectral control in perovskite solar cells, concentrating solar power systems, and thermophotovoltaics. This has significantly enhanced solar conversion efficiencies, approaching theoretical limits. In biosensing, nanophotonic platforms achieve unprecedented sensitivity in detecting biomolecules, pathogens, and pollutants, enabling real-time diagnostics and environmental monitoring. Medical applications leverage tailored light–matter interactions for precision photothermal therapy, image-guided surgery, and early disease detection. Furthermore, nanophotonics underpins next-generation optical neural networks and neuromorphic computing, offering ultrafast, energy-efficient alternatives to von Neumann architectures. Despite rapid growth, challenges in scalability, fabrication costs, and material stability persist. Future advancements will rely on novel materials, AI-driven design optimization, and multidisciplinary approaches to enable scalable, low-cost deployment. This review summarizes recent progress and highlights future trends, including novel material systems, multidisciplinary approaches, and enhanced computational capabilities, paving the way for transformative applications in this rapidly evolving field. Full article

Photocatalytic reduction of carbon dioxide (CO₂) into high-value multicarbon products, such as ethylene (C₂H₄), remains a significant challenge due to the difficult C-C coupling process. Potassium poly(heptazine imide) (K-PHI) is a promising photocatalyst, yet efficiently exchanging its interlayer cations to tune catalytic selectivity without causing structural degradation is difficult. Herein, an efficient and green supercritical CO₂ (SC CO₂) assisted ion-exchange strategy was developed to successfully prepare a series of mono-/di-/trivalent cation-doped M-PHI photocatalysts (M = H⁺, Na⁺, Sr⁺, Ca²⁺, Co²⁺, Fe³⁺). Systematic characterizations confirmed that the SC-CO₂ treatment successfully achieved in-depth cation substitution without destroying the intrinsic heptazine framework, effectively regulating the interlayer structure and significantly optimizing the photoelectrochemical charge separation. Among the prepared samples, H-PHI exhibited the optimal photocatalytic CO₂ reduction performance with an outstanding selectivity toward C₂H₄ generation. Under simulated sunlight irradiation for 3 h, the yields of CO, CH₄, and C₂H₄ C₂H₄ C₂H₄ reached 3564.87, 807.32, and 40.00 μmol·g⁻¹, respectively, significantly outperforming pristine K-PHI and other metal-doped samples. Crucially, isotope-tracing experiments utilizing a SC CO₂-DCl treatment detected deuterated CH₄ and C₂H₄ products, providing direct evidence that the hydrogen in the carbon products originates from the introduced protons, thereby elucidating the precise reaction pathway for C-C coupling. This study provides a green and efficient supercritical CO₂ ion exchange strategy for the cation engineering of crystalline carbon nitride, and also offers new ideas and methods for designing high-activity photocatalysts for photocatalytic CO₂ reduction. Full article

In this study, composite silica-containing nanostructures were biosynthesized from residual rice husk through a fermentative process using Aspergillus niger at room temperature without calcination. The obtained nanostructures were initially characterized by UV–Vis spectrophotometry, Fourier-transform infrared spectroscopy (FTIR), and field-emission scanning electron microscopy (FE-SEM) to determine their optical and structural properties compared with chemically synthesized silica. The results demonstrated the successful formation of composite silica-containing amorphous nanostructures under ambient conditions without the use of calcination or mineral acids. UV–Vis analysis revealed intense absorption in the deep ultraviolet region, attributed to electronic transitions associated with Si–O–Si bonds within the amorphous silica network. FTIR analysis enabled the identification of functional groups present on the material surface, providing direct evidence of the nanostructures’ chemical composition. Additionally, FE-SEM micrographs showed that the rice husk surface after biosynthesis exhibited a rough and porous texture with a morphology consistent with the formation of composite silica-containing amorphous nanostructures, in agreement with the characteristic Si–O–Si vibrational bands observed in the FTIR spectra and the strong ultraviolet absorption detected by UV–Vis analysis. Full article

The transformation of waste plastics into hydrogen and functional carbon (C) materials represents a promising pathway for achieving both resource recycling and the production of value-added products. Owing to their tunable physicochemical properties, plastic-derived carbons have attracted significant attention in electrochemical energy storage applications. Various C nanostructures, including graphene, porous C, hard C, and C nanotubes (CNTs), can be generated from discarded plastics through thermochemical processes. The electrochemical performance of these materials is closely governed by their structural characteristics, such as pore architecture, specific surface area, heteroatom doping, surface functionalities, and dimensional morphology. This review aims to provide a comprehensive and systematic overview of the conversion of waste plastics into functional C nanomaterials via thermochemical routes, particularly catalytic pyrolysis and carbonization. The resulting C nanostructures are systematically categorized based on their dimensional architectures (0D, 1D, 2D, and 3D) and comparatively analyzed in terms of their structural features and electrochemical performance. Emphasis is placed on the transformation of diverse plastic feedstocks into high-value C materials with tailored dimensional architectures, including graphene, CNTs, C nanospheres, C nanosheets, porous carbons, and their composites. Furthermore, recent progress and critical challenges in utilizing these materials for electrochemical energy storage systems, such as supercapacitors and rechargeable batteries (Li-ion, Na-ion, K-ion, Li-S, and Zn-air), are discussed. Distinct from previous reports, this review highlights the correlation between thermochemical processing strategies, resulting structural features, and electrochemical performance, providing new insights into the rational design of high-performance C materials. These findings are expected to facilitate the advancement of sustainable energy storage technologies while contributing to effective plastic waste valorization. Full article

In order to satisfy the requirement for lightweight, highly reliable sprayable silicone rubber insulation material (SASI) in next-generation spacecraft, and to achieve a synergistic balance among the sprayability, mechanical properties and ablation resistance of SASI, this paper describes the preparation of nanostructured magnesium silicate (n-MS) via a hydrothermal method and systematically investigates its effects on the sprayability, mechanical properties and ablation resistance of sprayable SASI. The findings suggest that when the n-MS loading is set at 15 parts, the linear ablation rate and mass ablation rate of the SASI under oxy-acetylene conditions are as low as 0.10 mm/s and 0.07 g/s, respectively, representing reductions of 41.8% and 67.1% compared to the unmodified samples. Building upon this enhancement in ablation resistance, the tensile strength was also increased by 3.70 MPa, representing a 19.3% increase. It is crucial to note that during the spraying process, the viscosity of the silicone rubber system remained within a narrow range of 540–550 mPa·s following the addition of this filler. This finding indicates that the introduction of n-MS had no significant adverse effect on the spraying process. In summary, n-MS has been demonstrated to enhance the mechanical strength and ablation resistance of silicone rubber materials while maintaining adequate spray coating performance. In comparison with conventional filled silicone rubbers, the sprayable silicone rubber insulating material developed in this study provides a new material basis for the future lightweight and intelligent development of aerospace engines. Full article

Peptide-based materials represent a rapidly growing field in nanotechnology, bridging bottom-up self-assembly and top-down approaches for the development of functional nanostructures. Among these systems, peptide-based nanogels (NGs), namely nanogels in which peptides assume a structural role, have emerged as a promising class of injectable formulations. Typically characterized by a core–shell architecture, these systems are closely related to peptide hydrogels in terms of structural organization. This review provides a state-of-the-art overview of peptides used as core structural elements for NG formulation, focusing on the peptide building blocks employed, the main formulation methodologies, and their current applications, with particular emphasis on pharmaceutical ones. Their potential as drug delivery systems and stimuli-responsive platforms for controlled and targeted release is also reported. For clarity, the reported formulations are classified according to the chemical nature of the core-structuration peptide, distinguishing systems based on Fmoc-FF from those derived from other primary sequences, including Boc-protected tripeptides, dehydropeptides, and chemically crosslinked peptide assemblies. Full article

Acute kidney injury (AKI) presents a critical clinical challenge due to its rapid progression and lack of effective targeted therapies. The herbal combination of rhubarb and Salvia miltiorrhiza, a cornerstone of Traditional Chinese Medicine (TCM) for renal protection, shows promise, yet its bioactive components and mode of action remain incompletely understood. This study identifies and characterizes inherent nanoscale entities from this herbal pair as a novel nanotherapeutic platform. Self-assembled nanoparticles (designated RSNPs) were isolated from the ethanol extract via differential centrifugation. Comprehensive characterization revealed that RSNPs form stable nanostructures through spontaneous self-assembly, primarily driven by supramolecular interactions (e.g., π-π stacking and hydrogen bonding). UPLC-MS/MS quantification confirmed the co-assembly of multiple bioactive constituents within RSNPs. Network pharmacology and molecular docking initially predicted their synergistic action on AKI-related pathways. In a cisplatin-induced murine AKI model, RSNP administration markedly attenuated renal dysfunction and histopathological damage, mechanistically linked to the mitigation of oxidative stress (e.g., decreased MDA and increased SOD) and inflammation (e.g., downregulated TNF-α and IL-6). In vitro, RSNPs demonstrated enhanced cellular internalization and superior cytoprotection against cisplatin toxicity in renal tubular epithelial cells, significantly reducing apoptosis. These findings unveil that the therapeutic efficacy of the Rheum palmatum L.–Salvia miltiorrhiza Bunge pair is intrinsically embedded within its nanoscale architecture. RSNPs represent a new class of TCM-derived nanotherapeutics with a well-defined material basis and multimodal mechanisms, offering a promising strategy for AKI treatment. Full article

The development of efficient, sustainable, and low-cost catalysts for wastewater treatment remains a major environmental challenge. In this work, Zn-doped CuO nanostructures were successfully synthesized via a green route using Aloysia citrodora leaf extract as a natural reducing and stabilizing agent. The structural and morphological properties of the prepared catalysts were systematically characterized by XRD, Raman spectroscopy, FTIR, SEM, and EDX analyses. The results revealed the formation of highly crystalline monoclinic CuO nanoparticles, whose defect density and surface properties were significantly modified by Zn incorporation. The catalytic performance of the synthesized materials was evaluated through the heterogeneous Fenton-like degradation of Rhodamine B in aqueous solution under dark conditions. The Zn-doped CuO catalyst exhibited outstanding degradation efficiency (~99.97%) within only 30 min, using a low catalyst dosage of 15 mg and a minimal H₂O₂ amount of 25 μL. The enhanced catalytic activity is attributed to the synergistic interaction between Zn-induced lattice defects and the Cu²⁺/Cu⁺ redox cycle, which promotes efficient H₂O₂ activation and •OH radical generation. Radical scavenging experiments confirmed the dominant role of hydroxyl radicals in the degradation process. Compared with previously reported CuO-based catalysts, the present system demonstrates superior performance in terms of reaction rate, oxidant consumption, and energy efficiency. These findings highlight the potential of Zn-doped CuO synthesized via green chemistry as a promising and sustainable catalyst for advanced wastewater treatment applications. Full article

Background/Objectives: Beeswax, a complex natural secretion primarily derived from Apis mellifera and Apis cerana, has evolved from an ancient remedy into a multifunctional excipient and bioactive material in modern pharmaceutical sciences. This review evaluates its physicochemical properties, pharmaceutical applications, and emerging biomedical potential, while addressing current quality and regulatory challenges. Methods: A narrative review was conducted by analyzing literature on the chemical composition, functional properties, conventional uses, advanced drug delivery applications, pharmacological activities, and quality control of beeswax, emphasizing structural characteristics, formulation roles, and integration into innovative delivery technologies. Results: Beeswax is a lipid-based matrix composed of over 300 constituents, including wax esters, hydrocarbons, and free fatty acids, conferring thermoplasticity, biocompatibility, and structural stability. Traditionally, it functions as a stiffening agent, viscosity modifier, and emulsion stabilizer in topical formulations, forming an occlusive barrier that enhances skin hydration. In advanced systems, it serves as a solid lipid matrix in nanostructured lipid carriers (NLCs), microspheres, and 3D-printed tablets, enabling controlled drug release and improved bioavailability of lipophilic compounds. It also exhibits antimicrobial, anti-inflammatory, and wound-healing activities, while beeswax-derived policosanols show potential cardiovascular and gastroprotective benefits. However, concerns regarding paraffin adulteration and pesticide contamination highlight the need for stringent analytical and regulatory oversight. Conclusions: With rigorous quality control and sustainable sourcing, beeswax remains a versatile, eco-friendly material bridging traditional medicine and advanced pharmaceutical innovation. Full article

Polymer films and coatings play an increasingly critical role in extending material functionality across industrial, biomedical, and environmental applications. Recent advances in surface engineering have enabled precise control of interfacial properties, leading to enhanced durability, cleanliness, and protection. This review summarizes state-of-the-art strategies for modifying polymer surfaces, with an emphasis on plasma-based surface modification and plasma-induced polymerization as versatile, solvent-free methods for tailoring wettability, chemical functionality, and adhesion. Furthermore, it examines emerging classes of self-cleaning and self-sterilizing coatings that leverage photocatalytic, hydrophobic, or antimicrobial mechanisms to mitigate contamination, biofouling, and pathogen transmission. Additionally, developments in high-performance barrier films designed to protect food products and electronic devices through improved resistance to gases, moisture, and chemical agents are highlighted. By integrating insights from materials chemistry, surface physics, and nanostructured coating design, this review provides a comprehensive overview of current achievements and future directions in functional polymer films and coatings aimed at anti-pollution, antibacterial, and anti-corrosion performance. Full article