Search Results (39)

Wellbore instability in shale formations represents a worldwide challenge in drilling engineering. The development of high-performance shale stabilizers is crucial for enhancing wellbore stability. A core–shell structured shale stabilizer, designated AAD-CaCO₃, was synthesized via inverse emulsion polymerization using acrylamide (AM), 2-acrylamido-2-methylpropanesulfonic acid (AMPS), and dimethyl diallyl ammonium chloride (DMDAAC) as monomers. Nano-CaCO₃ was generated in situ by reacting calcium chloride and sodium carbonate. Sodium bisulfite and ammonium persulfate were used as initiators. The product was characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). Its effects on the rheological properties and filtration performance of a bentonite-based mud were evaluated. The stabilizer’s efficacy in inhibiting shale hydration swelling and dispersion was evaluated through linear swelling tests and shale rolling dispersion experiments, while its plugging performance was examined via a filtration loss test with a nanoporous membrane and spontaneous imbibition tests. The results indicated that AAD-CaCO₃ possesses a core–shell structure with the nano-CaCO₃ encapsulated by the polymer. It moderately improved the rheology of the bentonite-based mud and significantly reduced both the low-temperature and low-pressure (LTLP) filtration loss and the high-temperature and high-pressure (HTHP) filtration loss. AAD-CaCO₃ could be adsorbed onto shale surfaces through electrostatic attraction, resulting in substantially reduced clay hydration swelling and an increased shale cutting recovery rate. Effective plugging of micro-nanopores in shale was achieved, demonstrating a dual mechanism of chemical inhibition and physical plugging. Full article

With the increasing harsh drilling environments encountered more frequently than ever before, developing environmentally benign and multifunctional additives is essential to formulate high performance drilling fluids. Herein, hydrothermal carbon/bentonite composites (HCBCs) were prepared by a hydrothermal carbonization reaction using soluble starch and sodium bentonite as raw materials. A systematic investigation was conducted into the effects of HCBC concentration on the rheological, filtration, and lubricating characteristics of xanthan gum, modified starch, and high-temperature polymer slurries. These properties were evaluated before and after exposure to hot rolling at different temperatures. The hydroxyl radical scavenging properties of HCBC were evaluated. Observation showed plentiful micro- and nano-sized carbon spheres deposited on the bentonite particles, endowing the bentonite with better dispersion. HCBCs could maintain stability of the water-based drilling fluids’ rheological profile, decrease filtration loss, and improve the lubrication with relatively low concentrations. The excellent properties were attributed to the highly efficient scavenging of free radicals and the stabilization of bentonite particle dispersion. Full article

Long-term water flooding development has exacerbated reservoir heterogeneity, and traditional polymer gels are unable to simultaneously meet the requirements of high injectability and strong plugging strength. If the viscosity of the polymer is high, its injectability will be poor; on the contrary the viscosity is low, the plugging strength will be poor, which severely restricts the oil recovery effect. This study synthesized an NBAP through free radical polymerization followed by a substitution reaction, and a plugging system (NBAP-B1) was subsequently formed by combining the polymer with a Cr³⁺ crosslinking agent. Rheological experiments demonstrated that the system exhibited significant shear thinning behavior, as well as excellent temperature and salt resistance. Gelation experiments indicated that the NBAP-B1 system featured controllable gelation time (20~150 h) and high gelation strength (J grade), along with excellent resistance to both high temperature and high salinity. Microscopic analysis revealed that the gel formed by NBAP-B1 possessed a dense and uniform three-dimensional network structure. Injection and plugging experiments demonstrated that NBAP-B1 exhibited optimal injectability and outstanding plugging performance. Additionally, profile control and displacement tests revealed a 18.37% enhancement in oil recovery efficiency by water flooding after the application of NBAP-B1 for conformance control. Collectively, these results demonstrate that the NBAP exhibits significantly superior performance compared to single component systems. It combines excellent injectability with high strength plugging capability, offering an effective approach for enhancing oil recovery in low permeability reservoirs. Full article

Among the main man-made water pollutants that pose a danger to the environment are oil products, heavy metals, and radionuclides, as well as micro- and nanoplastics. To purify such waters, it is necessary to use advanced methods, with sorption being one of them. The aim of this work is to develop a nano-functionalized composite, comprising magnetically responsive, thermally expanded graphite (TEG) and the natural clay bentonite, and to assess its ability to purify man-made contaminated waters. Throughout the course of the research, the methods of scanning electron microscopy, optical microscopy, dynamic light scattering, radiometry, and atomic absorption spectrophotometry were used. The use of the TEG–bentonite composite for the purification of the model water, simulating radioactively contaminated nuclear power plant (NPP) effluent, reduced the content of organic substances by 10–15 times, and the degree of extraction of cesium, strontium, cobalt, and manganese was between 81.4% and 98.8%. The use of the TEG–bentonite composite for the purification of real radioactively contaminated water obtained from the object “Shelter” (“Ukryttya” in Ukrainian), in the Chernobyl Exclusion Zone, Ukraine, with high activity, containing organic substances, including micro- and nanoplastics, reduced the radioactivity by three orders of magnitude. The use of cesium-selective sorbents for additional purification of the filtrate allowed for further decontamination of radioactively contaminated water with an efficiency of 99.99%. Full article

With the low-carbon transformation of the steel industry, using low-carbon raw materials is one of the important ways to achieve the “dual carbon” goals. Pellets have great physical and chemical properties as low-carbon furnace materials, which can significantly reduce blast furnace carbon emissions, exhibiting favorable overall environmental benefits. Increasing their proportion in the furnace is one of the important measures the steel industry can take to reduce carbon emissions. Binders play a critical role in the pelletizing process, and their properties directly influence pellet quality, thereby affecting the subsequent blast furnace smelting process. Compared with traditional bentonite, organic binders have become a potential alternative material due to their environmental friendliness, renewability, and ability to significantly reduce silica and alumina impurities in pellets while improving the iron grade. This work systematically elucidates the mechanism of organic binders, which primarily rely on the chemical adsorption of carboxyl groups and the hydrogen bonding of hydroxyl groups to enhance pellet strength, and then provides three typical examples of organic binders: lignosulfonate, carboxymethyl cellulose (CMC), and carboxymethyl starch (CMS). The common characteristic of these organic binders is that they are derived from renewable biomass through chemical modification, which is a derivative of biomass with renewable and abundant resources. However, the main problem with organic binders is that they burn and decompose at high temperatures. Current research has achieved technological breakthroughs in pellet quality by combining LD sludge, low-iron oxides, and nano-CaCO₃, including improved iron grade, reduced reduction swelling index (RSI), and enhanced preheating/roasting strength. Future studies should focus on optimizing the molecular structure of organic binders by increasing the degree of substitution of functional groups and the overall degree of polymerization. This approach aims to replace traditional bentonite while exploring applications of composite industrial solid wastes, effectively addressing the high-temperature strength loss issues in organic binders and providing strong support for the steel industry to achieve the green and low-carbon goals. Full article

Sustainable deepwater drilling for oil and gas offers significant potential. In this work, we synthesized a nanoscale collapse-prevention agent by grafting didecyldimethylammonium chloride onto spherical nano-silica and characterized it using Fourier-transform infrared spectroscopy, thermogravimetric analysis, zeta-potential, and particle-size measurements, as well as SEM and TEM. Adding 1 wt% of this agent to a bentonite slurry only marginally alters its rheology and maintains acceptable low-temperature flow properties. Microporous-membrane tests show filtrate passing through 200 nm pores drops to 55 mL, demonstrating excellent plugging. Core-immersion studies reveal that shale cores retain integrity with minimal spalling after prolonged exposure. Rolling recovery assays increase shale-cutting recovery to 68%. Wettability tests indicate the water contact angle rises from 17.1° to 90.1°, and capillary rise height falls by roughly 50%, reversing suction to repulsion. Together, these findings support a synergistic plugging–adsorption–hydrophobization mechanism that significantly enhances wellbore stability without compromising low-temperature rheology. This work may guide the design of high-performance collapse-prevention additives for safe, efficient deepwater drilling. Full article

Modified nano-clays, alone or combined with probiotics, may offer a novel and sustainable approach to improve ruminal fermentation and mitigate CH₄ emissions in high-fiber diets. This study evaluated the properties and effects of modified nano-bentonite (MNB), with or without yeast (Saccharomyces cerevisiae), compared to natural bentonite (NB) and monensin, using the in vitro gas production (GP) technique. The substrate used was a basal diet composed primarily of forage (Trifolium alexandrinum clover) in a 70:30 forage-to-concentrate ratio. The treatments were a control group receiving the basal diet without additives; a monensin-added diet containing 40 mg/kg of dry matter (DM); a yeast-added diet with Saccharomyces cerevisiae at 2 × 10⁸ CFU/g of DM; a NB clay-added diet at 5 g/kg of DM; and MNB diets added at two levels (0.5 g/kg of DM (MNB_Low) and 1 g/kg of DM (MNB_High)), with or without S. cerevisiae. MNB showed a smaller particle size and improved properties, such as higher conductivity, surface area, and cation exchange capacity, than NB. Sulfur and related functional groups were detected only in MNB. No differences were observed in total GP, while both the monensin diet and the MNB_High-with-yeast diet significantly reduced CH₄ emissions compared to the control (p < 0.05). The MNB_High-without-yeast combination significantly (p < 0.05) reduced hemicellulose degradation, as well as total protozoal counts, including Isotricha and Epidinium spp. (p < 0.05), compared to the control. Ammonia levels did not differ significantly among treatments, while NB and MNB_High diets tended to have (p = 0.063) the highest short-chain fatty acid (SCFA) concentrations. These findings suggest the potential modulatory effects of yeast and MNB on rumen fermentation dynamics and CH₄ mitigation. Full article

The current investigation aims to offer fundamental, molecular- to microscopic-level descriptions of methane gas inside natural source clay minerals. Texas montmorillonite (STx-1), Georgia kaolinite (KGa-2), and Ca²⁺-saturated Texas montmorillonite (Ca-STx-1, Ca-bentonite) were utilized as subsurface model clay minerals for elucidating nano-confinement behaviors of ¹³C-labeled methane gas. High-pressure magic angle spinning (MAS) nuclear magnetic resonance (NMR) was used to describe the interactions between methane and the clays by varying temperature and pressure. Proton-decoupled ¹³C-NMR spectra were acquired at 28.2 bar at 307 K, 32.6 bar at 346 K, 56.4 bar at 307 K, 65.1 bar at 346 K, 112.7 bar at 307 K, and 130.3 bar at 346 K. In the pure state, no significant thermal effect on the behavior of methane was observed. However, there was a perceptible variation in the chemical shift position of confined methane in the mixtures with the clays up to 346 K. Conversely, the ¹³C-NMR chemical shift of methane altered by varying pressure in a pure state, and the mixtures with clays, attributed to the interaction of methane with the clay surfaces or the nanopore network of the clay–silica mixed phase. Pressure-induced shifts in methane peak positions were observed: 0.25 ppm (28.2–56.4 bar) and 0.47 ppm (56.4–112.3 bar) at 307 K. For methane in a montmorillonite mixture, shifts were 0.32 ppm for bulk-like methane and 0.20 ppm for confined methane under similar conditions. At 346 K, increasing pressure from 65.1 to 130.3 bar caused shifts exceeding 0.50 ppm, with bulk-like methane showing a 0.64 ppm shift and confined methane a 0.57 ppm shift. There was only one ¹³C-NMR methane peak in the mixture with either kaolinite (KGa-2) or Ca-bentonite with line broadening compared to that of pure methane. Still, two peaks were observed in the mixture with STx-1, explained by the imbibition and mobility of methane in the pore network. Full article

Until now, no slow-release urea (SRU) fertilizer has been made using the screw press method and the powder of plant residues rich in polyphenols, which are considered eco-friendly materials due to some health benefits for agricultural soil. Therefore, the goal of this experiment was to synthesize a novel SRU fertilizer using “eco-friendly materials” and the “screw press method”. In order to achieve this goal, urea (U) was innovatively and highly intercalated between interlayers of impure montmorillonite (Mt) (bentonite) with the help of polyphenol-rich pomegranate peel powder (PPP) by a single-screw oil press machine. The experiment had five treatments, including a fixed ratio of U/Mt (4:1) with variable ratios of U/Mt/PPP (w/w), including 4:1:0 (F₁), 4:1:1 (F₂), 4:1:1.5 (F₃), and 4:1:2 (F₄). Control (U) and F₅ treatments (U/PPP at ratio of 4:1) were also included. These composites were fabricated using a single-screw oil press machine. The produced composites were characterized using FTIR, SEM, XRD, and TG analyses. The release pattern was studied using the White method. The XRD (low-angle) results revealed that the interlayer space of Mt increased from 12.3 Å in bentonite to 19.4 Å, 27.3 Å, 25.7 Å, and 0 Å in the F₁, F₂, F₃, and F₄ composites, respectively, which is an indicator of the high intercalation of U between the interlayers of Mt, especially in the F₂ treatment. The XRD (low- and normal-angle) analyses indicated that the two main reasons for the high intercalation in the F₂ treatment were, first, the complete conversion of urea from a crystalline to an amorphous state by PPP and, second, the increase in the interlayer space of Mt nano-sheets by PPP. It seems that PPP at a low concentration (F₂) can have a positive effect on the placement of U in the interlayer space, but at high concentrations (F₄), due to intensive pectin gelation, the space between the Mt layers grows until complete exfoliation. FTIR spectra and TG analysis also confirmed this hypothesis. SEM images revealed the formation of an intensive crosslink between U, Mt, and PPP. A release test in water revealed that only 10% of U in the F₂ treatment was released after 10 h, and 87% after 120 h, which indicates the satisfactory slow-release pattern of this composite. By comparing the results of the present study with the other SRUs reported in the literature, it can be concluded that the composite F₂, in addition to offering valuable polyphenol-rich plant materials, had an acceptable performance in the aspect of the U release pattern. Full article

Producing an eco-friendly fuel with the least amount of sulfur compounds has been an ongoing issue for petroleum refineries. In this study, bentonite (which is a cheap material and is locally available in abundance) is employed to prepare a nano-silica catalyst with a high surface area to be used for the oxidative desulfurization of kerosene. Two composite catalysts of Fe/silica were supported on CAT-1 (0% HY-zeolite and 100% nano-silica) and CAT-2 (20% HY-zeolite and 80% nano-silica). The activity of the catalysts was evaluated in a batch ODS (oxidative desulfurization) process at temperatures of 30, 60, 90, and 120 °C, a pressure of 1 atm, and a reaction time of 30, 60, 90, and 120 min using 120 L/h of air as the oxidant. The results revealed that the highest total sulfur removal efficiency was 50% and 87.88% for 100% nano-silica (CAT-1) and 80% nano-silica (CAT-2), respectively. The experimental data were then used to construct and validate an accurate mathematical model of the process. The operational parameters for eliminating more than 99% of sulfur and producing eco-friendly fuel were then achieved by using the model. The testing methods for these characterizing materials included X-ray diffraction (XRD), thermal gravimetric examination (TGA), X-ray fluorescence (XRF), and surface area (BET). The outcomes indicated that the addition of HY-zeolite increased the activity of the catalyst (CAT-2 > CAT-1). Full article

The issue of wellbore instability poses a significant challenge in the current exploration of shale gas reservoirs. Exploring more efficient shale stabilizers has always been a common goal pursued by researchers. In this paper, a novel shale stabilizer, denoted as ANS, was prepared by employing a silane-coupling modification method to graft (3-Aminopropyl) triethoxysilane (APTES) onto the surface of nano-silica. The structure of ANS was characterized through Fourier transforms infrared spectroscopy (FT-IR), thermo-gravimetric analysis (TGA), and particle size tests (PST). The shale stabilizing properties of ANS were evaluated through tests such as pressure penetration, BET analysis, hydration expansion and dispersion. Furthermore, the interaction between ANS as a shale stabilizer and clay was explored through clay zeta potential and particle size analysis. The results indicated that ANS exhibited a stronger plugging capability compared to nano-silica, as evidenced by its ability to increase the shale pressure penetration time from 19 to 131 min. Moreover, ANS demonstrated superior hydration inhibition compared to commonly used KCl. Specifically, it reduced the expansion height of bentonite from 8.04 to 3.13 mm and increased the shale recovery rate from 32.84% to 87.22%. Consequently, ANS played a dual role in providing dense plugging and effective hydration inhibition, contributing significantly to the enhancement of wellbore stability in drilling operations. Overall, ANS proved to be a promising shale stabilizer and could be effective for drilling troublesome shales. Full article

When drilling into a reservoir, the drilling fluid containing bentonite is prone to solid phase invasion, causing serious damage to the reservoir, and the conventional API barite suspension stability is poor, which makes it easy to cause sedimentation and blockage. Therefore, in order to avoid accidents, we use ultrafine barite to obtain a good suspension stability. More importantly, the method of modifying zwitterionic polymers on the surface of nano-silica is used to develop a temperature-resistant and salt-resistant fluid loss reducer FATG with a core-shell structure, and it is applied to ultra-fine clay-free water-based drilling fluid (WBDF). The results show that the filtration loss of clay-free drilling fluid containing FATG can be reduced to 8.2 mL, and AV can be reduced to 22 mPa·s. Although the viscosity is reduced, FATG can reduce the filter loss by forming a dense mud cake. The clay-free drilling fluid system obtained by further adding sepiolite can reduce the filtration loss to 3.8 mL. After aging at 220 °C for 15 d, it still has significant salt tolerance, the filtration loss is only 9 mL, the viscosity does not change much, a thinner and denser mud cake is formed, and the viscosity coefficient of the mud cake is smaller. The linear expansion test and permeability recovery evaluation were carried out. The hydration expansion inhibition rate of bentonite can reach 72.5%, and the permeability recovery rate can reach 77.9%, which can meet the long-term drilling fluid circulation work in the actual drilling process. This study can provide guidance for technical research in related fields such as reservoir protection. Full article

Since bentonite can absorb neutrons and gamma rays without sacrificing structural integrity, it is frequently used as the main shielding material in many nuclear installations. Recently, there has been a trend toward enhancing the shielding qualities of bentonite by adding various chemicals. However, the majority of the added materials either require particular handling procedures or pose health risks. The availability of environmentally friendly additives would be wonderful. The addition of barite to bentonite composites greatly raises the density of the specimens. Additionally, the performance of bentonite–barite composites as radiation shielding materials is improved by adding various amounts of bulk and nano Bi₂O₃ as a filler (6%, 13%, and 20%). Energy dispersive X-ray analysis (EDX) was used to determine the chemical makeup of the produced specimens. The scanning electron microscopy (SEM) pictures showed the samples’ cross-sections’ porosity and homogeneity. ²⁴¹Am, ¹³³Ba, ¹³⁷Cs, and ⁶⁰Co are radioactive sources that emit energies of 59.53, 80.99, 356.01, 661.66, 1173.23, and 1332.5 keV, respectively, and the NaI (Tl) scintillation detector was used in this investigation. The area under the peak of the observed energy spectra was measured using the Genie 2000 program in both the specimen’s absence and presence. The coefficients for linear and mass attenuation were calculated. To determine the theoretical mass attenuation coefficients, the XCOM program was utilized and then compared to the corresponding experimental values. Various radiation shielding parameters dependent on the linear attenuation coefficient were computed for each studied composite. These parameters include the mean free path (MFP), half value layer (HVL), and tenth value layer (TVL). Also, the Z_eff and the EABF were determined for each specimen. According to the findings, bismuth oxide was added to bentonite–barite composites to reduce the transmitted flux through the specimens, which increased the LAC of the bentonite–barite composites. Furthermore, adding nanosized bismuth oxide particles increased the sample’s density and improved the material’s shielding properties. At a photon energy of 0.356 keV, the relative deviation (∆%) between the experimental nano- and micro values for Bi₂O₃ (20 wt%) was 12.1974, confirming that the nanoparticles increase attenuation efficiency. Full article

Dyes are the most carcinogenic organic compounds that are discarded by most of the textile industries without any prior treatment, which is harmful for the environment. This study aims to develop a bentonite-clay/carbon-nanotube (CNT)-based adsorbent to treat textile wastewater for water sustainability. The preliminary and post-characterization of adsorbent involves scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and Brunauer–Emmett–Teller (BET) and energy-dispersive X-ray (EDX) analysis to determine the changes in surface morphology, functional group, and surface area of the adsorbent. Linear and nonlinear isotherms and kinetic studies were performed to explore the sorption mechanism. The results show that the nonlinear form of the Langmuir isotherm best fits adsorption with a qmax of 550 mg/g. The adsorption followed the nonlinear pseudo-first-order kinetics, favoring chemisorption with R² ≈ 1 and X₂ = 0.22. Maximum dye removal (89.9%) was achieved under the optimum conditions of pH 3, an adsorbent dose of 100 mg, and a contact time of 120 min, with an initial COD concentration of 1140 mgL⁻¹. This study has demonstrated the successful application of a bentonite-clay/CNT-based adsorbent on textile wastewater treatment. Full article

Drought stress in arid regions is a serious factor affecting yield quantity and quality of economic crops. Under drought conditions, the application of nano-elements and nano-agents of water retention improved the water use efficiency, growth performance, and yield quantity of drought-stressed plants. For this objective, two field experiments were performed and organized as randomized complete block designs with six replications. The treatments included kaolin (5 t. ha⁻¹) bentonite (12.5 t. ha⁻¹), perlite (1.25 t.ha⁻¹), N-zeolite (1.3 L.ha⁻¹), N-silicon (2.5 L.ha⁻¹), and N-zinc (2.5 L.ha⁻¹). The current study showed that the application of silicon, zinc, and zeolite nanoparticles only positively influenced the morphological, physiological, and biochemical properties of the drought-stressed coriander plant. Exogenous application of N-silicon, N-zinc, and N-zeolite recorded the higher growth parameters of drought-stressed plants; namely, plant fresh weight, plant dry weight, leaf area, and root length than all the other treatments in both seasons. The improvement ratio, on average for both seasons, reached 17.93, 17.93, and 18.85% for plant fresh weight, 73.46, 73.46, and 75.81% for plant dry weight, 3.65, 3.65, and 3.87% for leaf area, and 17.46, 17.46, and 17.16% for root length of drought-stressed plants treated with N-silicon, N-zinc, and N-zeolite, respectively. For physiological responses, the application of N-zeolite, N-silicon, and N-zinc significantly increased leaf chlorophyll content, photosynthetic rate, water use efficiency, chlorophyll fluorescence, and photosystem II efficiency compared with the control in both seasons, respectively. Similar results were observed in antioxidant compounds, nutrient accumulation, and phytohormones. In contrast, those treatments markedly reduced the value of transpiration rate, nonphotochemical quenching, MDA, ABA, and CAT compared to control plants. Regarding the seed and oil yield, higher seed and oil yields were recorded in drought-stressed plants treated with N-zeolite followed by N-silicon and N-zinc than all the other treatments. Application of N-zeolite, N-silicon and N-zinc could be a promising approach to improve plant growth and productivity as well as to alleviate the adverse impacts of drought stress on coriander plants in arid and semi-arid areas. Full article