Search Results (367)

Adequate treatment of the organic fraction of municipal solid waste (OFMSW) in co-digestion with sewage sludge (SS) through dark fermentation (DF) technologies has been widely studied and recognized. However, there is little experience with a high-solids approach, where practical and scalable conditions are established to lay the groundwork for further development of feasible industrial-scale projects. In this study, the biochemical hydrogen potential of OFMSW using a 7 L batch reactor at mesophilic conditions was evaluated. Parameters such as pH, redox potential, temperature, alkalinity, total solids, and substrate/inoculum ratio were adjusted and monitored. Biogas composition was analyzed by gas chromatography. The microbial characterization of SS and post-reaction percolate liquids was determined through metagenomics analyses. Results show a biohydrogen yield of 38.4 NmLH₂/gVS OFMSW, which forms ~60% of the produced biogas. Aeration was proven to be an efficient inoculum pretreatment method, mainly to decrease the levels of methanogenic archaea and metabolic competition, and at the same time maintain the required total solid (TS) contents for high-solids conditions. The microbial community analysis reveals that biohydrogen production was carried out by specific anaerobic and aerobic bacteria, predominantly dominated by the phylum Firmicutes, including the genus Bacillus (44.63% of the total microbial community), Clostridium, Romboutsia, and the phylum Proteobacteria, with the genus Proteus. Full article

The treatment of wastewater and the utilization of the by-products of these processes are an important part of the circular economy. The sewage sludge, a result of wastewater treatment, could be used as a material for plant nutrient supply and/or soil-improving products. The city of Nyíregyháza, Hungary, with 120,000 citizens, has a well-planned water treatment plant operated by Nyírségvíz Ltd., which, in cooperation with the Research Institute of Nyíregyháza, developed a municipal sewage sludge compost (SSC). The closed loop of sewage water treatment and the agricultural utilization of its by-product has been developed and managed. The compost product called Nyírkomposzt was planned for acidic sandy soils. Beyond the agronomic benefits, the sustainable and environmentally sound utilization of SSC reduces sewage sludge disposal. This active involvement of a water utility company demonstrates the potential of cross-sectoral cooperation in solving environmental problems. The quality of the compost fits the Hungarian legislation. To study the effects of 0, 9, 18, and 27 t ha⁻¹ doses of compost on acidic sandy soil, a long-term small plot experiment was started in 2003. The cumulative effects of the regular (every third year, last treatment before sampling in 2021) application of the SSC showed positive changes in basic soil properties, depending on the doses used. Increasing values were found in the case of pH from 4.5 to 6, plant available P₂O₅ from 240 to 690 ppm, and plant available K₂O from 180 to 200 ppm. The plant-available zinc and copper content also increased. Soil organic matter and total N content stabilized at around 0.9% and 0.08%, respectively. The grain yields of winter rye also increased in both investigated years. The yields of 18 t ha⁻¹ treatment were about two times higher compared to the control, but only in 2022 was the difference significant. Our findings underscore the potential of well-planned SSC applications to improve the fertility of ploughed, acidic sandy soil, taking into account the theory of the circular economy by utilizing wastes and decreasing landfilling. Full article

Substantial boosts in the low-energy nano-oxygenation of incoming process water were achieved at a municipal wastewater treatment plant (WWTP) upstream of activated sludge (AS) aeration lanes on a single-pass basis by means of an electric field nanobubble (NB) generation method (with unit residence times of the order of just 10–15 s). Both ambient air and O₂ cylinders were used as gas sources. In both cases, it was found that the levels of dissolved oxygen (DO) were maintained far higher for much longer than those of conventionally aerated water in the AS lane—and at DO levels in the optimal operational WWTP oxygenation zone of about 2.5–3.5 mg/L. In the AS lanes themselves, there were also excellent conversions to nitrate from nitrite, owing to reactive oxygen species (ROS) and some improvements in BOD and E. coli profiles. Nanobubble-enhanced Dissolved Air Flotation (DAF) was found to be enhanced at shorter times for batch processes: settlement dynamics were slowed slightly initially upon contact with virgin NBs, although the overall time was not particularly affected, owing to faster settlement once the recruitment of micro-particulates took place around the NBs—actually making density-filtering ultimately more facile. The development of machine learning (ML) models predictive of NB populations was carried out in laboratory work with deionised water, in addition to WWTP influent water for a second class of field-oriented ML models based on a more narrow set of more easily and quickly measured data variables in the field, and correlations were found for a more facile prediction of important parameters, such as the NB generation rate and the particular dependent variable that is required to be correlated with the efficient and effective functioning of the nanobubble generator (NBG) for the task at hand—e.g., boosting dissolved oxygen (DO) or shifting Oxidative Reductive Potential (ORP). Full article

The integration of renewable energy with circular economy strategies offers effective pathways to reduce greenhouse gas emissions while enhancing local energy independence. This study analyses three real-world projects implemented in Spain that exemplify this synergy. LIFE Smart Agromobility converts pig manure into biomethane to power farm vehicles, using anaerobic digestion and microalgae-based upgrading systems. Smart Met Value refines biogas from a wastewater treatment plant in Guadalajara to produce high-purity biomethane for the municipal fleet, demonstrating the viability of energy recovery from sewage sludge. The UNDERGY project addresses green hydrogen storage by repurposing a depleted natural gas reservoir, showing geochemical and geomechanical feasibility for seasonal underground hydrogen storage. Each project utilises regionally available resources to produce clean fuels—biomethane or hydrogen—while mitigating methane and CO₂ emissions. Results show significant energy recovery potential: biomethane production can replace a substantial portion of fossil fuel use in rural and urban settings, while hydrogen storage provides a scalable solution for surplus renewable energy. These applied cases demonstrate not only the technical feasibility but also the socio-economic benefits of integrating waste valorisation and energy transition technologies. Together, they represent replicable models for sustainable development and energy resilience across Europe and beyond. Full article

Municipal sewage sludge, a by-product of urban wastewater treatment, is increasingly recognized to be a strategic resource rather than a disposal burden. Traditional management practices, such as landfilling, incineration, and land application, are facing growing limitations due to environmental risks, regulatory pressures, and the underuse of the sludge’s energy and nutrient potential. This review examines the evolution of sludge management, focusing on technologies that enable energy recovery and resource valorization. The transition from linear treatment systems toward integrated biorefineries is underway, combining biological, thermal, and chemical processes. Anaerobic digestion remains the most widely used energy-positive method, but it is significantly improved by processes such as thermal hydrolysis, hydrothermal carbonization, and wet oxidation. Among these, hydrothermal carbonization stands out for its scalability, energy efficiency, and phosphorus-rich hydrochar production, although implementation barriers remain. Economic feasibility is highly context-dependent, being shaped by capital costs, energy prices, product markets, and policy incentives. This review identifies key gaps, including the need for standardized treatment models, decentralized processing hubs, and safe residual management. Supportive regulation and economic instruments will be essential to facilitate widespread adoption. In conclusion, sustainable sludge management depends on modular, integrated systems that recover energy and nutrients while meeting environmental standards. A coordinated approach across technology, policy, and economics is vital to unlock the full value of this critical waste stream. Full article

Volatile fatty acids (VFA) are valuable intermediates with growing demand in chemical, pharmaceutical, and environmental applications. Their sustainable production from organic waste is increasingly explored in the context of circular economy and biorefinery models. This study investigates the co-fermentation of waste-activated sludge (WAS) and the organic fraction of municipal solid waste (OFMSW) as a strategy for integrated VFA and biogas production. Semi-continuous experiments were carried out to assess the effect of the substrates ratio (WAS:OFMSW = 90:10 and 30:70), hydraulic retention time (HRT), and pH control (5, 9, no control) on VFA yield and composition. Results showed that higher OFMSW content and alkaline conditions favoured VFA production, with a maximum yield of 144.9 mgHAc·gVS⁻¹ at pH 9 and 70:30 ratio. Acetate dominated, while butyrate production peaked at 114.1 mgHBu·gVS⁻¹ under high sludge conditions. However, the addition of alkali required for pH control may lead to excessive accumulation of alkaline-earth metal ions, which can disrupt biological processes due to their potential toxicity. Anaerobic digestion of fermentation residues enhanced biomethane yields significantly (0.27 NL·gVS⁻¹ vs. 0.05 NL·gVS⁻¹ from raw sludge). The proposed process demonstrates potential for converting wastewater treatment plants into biorefineries, maximising resource recovery while reducing environmental impact. Full article

Against the backdrop of China’s “dual carbon” strategy, investigating the carbon emission characteristics and low-carbon operational status of wastewater treatment plants (WWTPs) across regions is pivotal for achieving synergistic pollution reduction and carbon mitigation. Leveraging 2024 operational data from 98 WWTPs in eastern China—encompassing treatment volume, energy consumption, sludge production, and chemical dosages—this study refined the Assessment Standard for Carbon Mitigation in Municipal WWTPs and Technical Specification for Low-Carbon Operation of WWTPs. A novel carbon accounting framework and low-carbon performance evaluation system were subsequently developed to analyze the impacts of treatment scale, technological configuration, and load rate on carbon footprints. Key findings revealed an average carbon intensity of 0.399 kg CO₂-eq/m³ for the region, with small-scale facilities (0.582 kg CO₂-eq/m³) exhibiting significantly higher emissions compared to their large-scale counterparts (0.392 kg CO₂-eq/m³). Indirect emissions constituted 62.1% of the total footprint, while chemical dosing contributed 14.2%, primarily driven by carbon sources and phosphorus removal agents. Fossil-derived CO₂ accounted for 4.6% of emissions. Notably, the AAO process demonstrated the lowest carbon intensity (0.370 kg CO₂-eq/m³), whereas SBR systems registered the highest (0.617 kg CO₂-eq/m³). Furthermore, 25% of the assessed facilities were classified as high-emission plants. Strategic recommendations are proposed, including prioritizing AAO process optimization, implementing intelligent chemical dosing control, utilizing food wastewater as an alternative carbon source, and enhancing operational load rates, to advance synergistic environmental and carbon mitigation goals in eastern China’s wastewater sector. Full article

To analyze the microbiological mechanisms of biological denitrification during low-temperature operations, continuous sampling of influent and activated sludge samples was conducted at the Changchun Municipal Wastewater Treatment Plant. The relative abundance and absolute gene abundance of ammonia-oxidizing bacteria, ammonia-oxidizing archaea, and denitrifying bacteria were determined using high-throughput sequencing technology and reverse transcription–polymerase chain reaction (RT–PCR) technology, respectively. Nitrosomonas and Nitrosospira were the dominant bacteria in ammonia-oxidizing bacteria; the detection rate was 100%; and the abundance distribution fluctuated greatly. The percentages of net proliferation rate greater than −0.05 were 75% and 62.5%, respectively, but the temperature effect was not obvious. The detection rate of Nitrosomonadaceae (norank) was 76.67%, and the percentage of net proliferation rate greater than −0.05 was 50%. The growth of ammonia-oxidizing archaea was limited at low temperature, and the abundance of most bacteria fluctuated greatly. The frequencies of net proliferation rate of Crenarchaeota (norank), Thaumarchaeota (norank), and Nitrososphaera greater than −0.05 were more than 50%. Of the 20 OUTs of denitrifying bacteria, 16 had a net increment rate greater than −0.2/d with a frequency greater than 50 per cent, of which Sinorhizobium and Alphaproteobacteria were detected with a frequency of 100% in activated sludge. The frequency of AOB and denitrifying bacteria net proliferation rate greater than zero during the low-temperature period was relatively high, which ensured the smooth progress of the denitrification process and reasonably explains the microbiological mechanism. In addition, it can be inferred that the migration of influent microorganisms can shape the population structure of denitrifying bacteria, as the net proliferation rate of most bacterial populations was less than 0. Full article

This study evaluates Spain’s biomethane production potential for 2030 and 2050, focusing on agricultural residues, livestock manure, municipal solid waste (MSW), and wastewater treatment plant (WWTP) sludge. The research aims to provide a regional analysis based on historical data on livestock populations, cultivated land, waste availability, and demographic projections. Using utilization coefficients and technological assumptions derived from existing biogas infrastructure, the study estimates that Spain could generate 9.71 TWh of biomethane by 2030, slightly below the national target of 10.41 TWh. By 2050, agricultural and livestock residues are expected to contribute 30.04 TWh, accounting for nearly 80% of total biomethane production, while the relative share of MSW and WWTP sludge will decrease. Andalusia, Castilla-La Mancha, and Castilla y León emerge as key contributors due to their extensive agricultural and livestock sectors. Catalonia and Madrid maintain significant roles driven by urban waste generation. The findings underscore the need for infrastructure expansion, particularly enhancing biomethane injection facilities into the natural gas grid, alongside financial incentives to support industry growth. This study highlights the role of biomethane in Spain’s renewable energy sector, emphasizing its potential to reduce greenhouse gas emissions, optimize organic waste utilization, and contribute to a sustainable energy transition. Full article

The expansion of sewage networks and treatment facilities results in considerable amounts of municipal sludge, which is essential for biogas production as part of energy diversification efforts. Principal Component Analysis (PCA) demonstrated a strong correlation between biogas production and its utilization in power generation units. Modernization efforts led to an increase in biogas utilization in power units but a decrease in boiler utilization, independent of the overall biogas production levels. The general linear model (GLM) further confirmed that biogas production was positively influenced by the amount of waste digested, while utilization in power units increased post modernization. A repeated measures ANOVA (Analysis of Variance) indicated significant increases in both dry matter and mineral content in digested sludge compared to raw sludge. SIMPER (Similarity Percentage) analysis revealed that the addition of glycerin water significantly reduced the nitrogen, ammonium nitrogen, and calcium content, while modernization increased these elements and slightly decreased the magnesium concentration. Multivariate dispersion analysis showed that samples treated with glycerin water exhibited less variability in metal content. Regression models explored the factors influencing mineral elements and dry mass in fermented sludge. The zinc content was positively associated with mineral content, while copper showed a negative correlation. The addition of glycerin water increased the mineral content, whereas modernization had the opposite effect. The nitrogen content was negatively correlated with dry mass. These findings provide valuable insights into optimizing sewage sludge treatment and biogas production processes by underlining the approaches for enhancing sludge properties to support efficient biogas production. Full article

In recent years, there has been an increase in the emission of tire wear particle (TWP) microplastics from wastewater treatment plants into the environment. The aim of this study was to determine the effect of TWPs in wastewater flowing into a biological reactor on the transcription of the 16S rRNA gene and the key genes responsible for nitrogen metabolism, amoA, nirK and nosZ, in aerobic granular sludge. The laboratory experiment was carried out in sequencing aerobic granular sludge reactors operated in an 8 h cycle into which TWP microplastics were introduced with municipal wastewater at a dose of 50–500 mg TWPs/L. The ammonia removal rate and the production of oxidized forms of nitrogen increased with the TWP dose. Gene transcript abundance analysis showed that the presence of rubber and substances leached from it promoted the activity of ammonium-oxidizing bacteria (160% increase), while the transcription of genes related to denitrification conversions was negatively affected. The activity of nitrite reductase gradually decreased with increasing TWP concentration in wastewater (decreased by 33% at 500 mg TWPs/L), while nitric oxide reductase activity was significantly inhibited even at the lowest TWP dose (decreased by 58% at 500 mg TWPs/L). The data obtained indicate that further studies are needed on the mechanisms of the effects of TWPs on the activities of the most important groups of microorganisms in wastewater treatment to minimize the negative effects of TWPs on biological wastewater treatment. Full article

With the continuous expansion of urban areas, the treatment of urban sewage is facing significant challenges. Tens of thousands of tons of municipal sludge (MS) are produced annually, which not only occupies substantial land resources but also poses potential environmental threats, thereby complicating wastewater treatment processes. Proper management of MS has thus become a critical issue requiring urgent attention. Meanwhile, water pollution continues to worsen, endangering both ecological systems and human health. MS contains a variety of organic compounds with active functional groups capable of forming strong coordination interactions with various waterborne pollutants. Building on this foundation, we successfully develop a multifunctional adsorbent using MS as the raw material through biomineralization. The synthesized adsorbent shows outstanding performance, exhibiting high adsorption capacity for fluoride (F⁻) and hexavalent uranium (U(VI)) in high-fluorine uranium-containing wastewater, effectively reducing the concentrations of these harmful substances. Additionally, the adsorbent shows strong affinity for the cationic dye methylene blue, making it highly suitable for the treatment of wastewater from the printing and dyeing industries. Notably, the adsorbent also possesses antibacterial properties, demonstrating significant bactericidal activity against Gram-negative E. coli in wastewater. The multifunctional adsorbent not only offers a novel solution to enhancing water quality and safety, but also represents a promising strategy for sustainable wastewater treatment. Full article

Microplastics have emerged as a global environmental concern due to their widespread presence and potential effects on ecosystems. Wastewater treatment plants (WWTPs) play a critical role in mitigating the release of microplastics into the environment. This study aimed to evaluate the abundance and distribution of microplastics in three municipal WWTPs exhibiting different sludge and water treatment technologies. Samples were collected at various stages of the treatment process, including influent, primary and biological sludge, treated water, thickened sludge and dehydrated sludge. Quantification analyses were performed and then coupled with operational data to assess pollution flow rates and the microplastic balance. An important removal rate (>97%) of microplastics along the water line was observed in all three WWTPs. The lower performance of 0.75 mm screening was observed regarding microplastic capture compared to conventional primary settling on the water line. No significant differences in the pollution flow rates between primary and biological sludge were detected. Whatever the thickening and dehydration technologies that were tested, the specific quantities of microplastics along the sludge treatment lines were steady, implying the comparable behaviour of microparticular pollution to total suspended solids. These results underscored the important role of the different concentration stages of sludge treatment lines in sequestrating microplastics within the sludge fraction. Full article

Sequencing batch reactor Grundfos technology (SBR-GT) system efficiently treats municipal and selected industrial wastewater, designed for small and medium-scale facilities. It offers advanced solutions for biodegradable wastewater, including municipal and food industry effluents. Important features include stable sedimentation under fluctuating influent conditions, no need for sludge recirculation, and full process automation. The system uses a static decanter and constant chamber filling for optimal oxygenation efficiency and reduced costs. The system uses a static decanter and constant chamber filling for optimal oxygenation efficiency and reduced costs. It is ideal for small settlements with variable inflow, such as towns, allowing flexible operation and cost-effective maintenance. Implementations showed stable parameters for COD (chemical oxygen demand), BOD5 (biochemical oxygen demand), total suspended solids (TSS), total nitrogen (TN), and total phosphorus (TP) and up to 99% pollutant reduction, demonstrating high effectiveness in regular and stormwater conditions. Using multivariate multiple linear regression, significant relationships were identified. A multiple regression analysis revealed a strong relationship between water quality parameters. Total suspended solids, Total nitrogen, and Total phosphorus collectively and significantly influenced both chemical oxygen demand and biochemical oxygen demand (p < 0.01 for all). The models explained a high proportion of variance, with R² values of 0.99 for COD and 0.93 for BOD5 (p < 0.001 for both). Specifically, TSS had a strong positive effect on COD (p < 0.001), while TN and TP also significantly affected COD (p < 0.01). Although the overall BOD5 model was highly significant, the individual effects of TSS, TN, and TP on BOD5 were not statistically significant in this model. This method demonstrated high effectiveness in both regular and stormwater conditions, enhancing overall treatment performance. Full article

This work investigates the adsorption of benzo[a]pyrene (BaP) using a charcoal adsorbent derived from sewage treatment plant sludge. BaP is a polycyclic aromatic hydrocarbon (PAH), carcinogenic to humans, which his used by the World Health Organization as a marker for all PAH mixtures. The charcoal was produced by the pyrolysis (500 °C, 4 h) of municipal sewage sludge. The resulting biochar presented mesoporous and oxygenated functional groups that are beneficial for the adsorption of benzo[a]pyrene. The material contained graphitic structures, suggesting potential sites for π–π interactions. The adsorption followed the Elovich kinetic model. A maximum adsorbed value of 60.8 µg g⁻¹ was achieved for an initial BaP concentration of 100 µg L⁻¹ of BaP at 298 K after 20 min. Parameters related to mass transfer phenomena, such as the intraparticle diffusion coefficient, were determined using the homogeneous solid diffusion model (HSDM). These experimental data demonstrate the great potential for computational fluid dynamics (CFD) applications. The value reached for the intraparticle diffusion coefficient was 1.63 × 10⁻¹³ m²s⁻¹. Adsorption equilibrium experiments showed that the Langmuir model was most suitable for experimental data, suggesting a monolayer molecular adsorption process. The results showed that charcoal can be employed as an effective material for removing BaP. Full article