Search Results (672)

This study was conducted using Geographic Information Systems (GISs), Remote Sensing (RS) techniques, and the SLEUTH model based on Cellular Automata (CA) to analyze the spatial and temporal dynamics of urban growth in Sanliurfa Province and to create future projections. The model in question simulates urban sprawl by using Slope, Land Use/Land Cover (LULC), Excluded Areas, urban areas, transportation, and hill shade layers as inputs. In addition, disaster risk areas and public policies that will affect the urbanization of the city were used as input layers. In the study, the spatial pattern of urbanization in Sanliurfa was determined by using Landsat satellite images of six different periods covering the years 1985–2025. The Analytical Hierarchy Process (AHP) method was applied within the scope of Multi-Criteria Decision Analysis (MCDA). Weighting was made for each parameter. Spatial analysis was performed by combining these values with data in raster format. The results show that the SLEUTH model successfully reflects past growth trends when calibrated at different spatial resolutions and can provide reliable predictions for the future. Thus, the proposed model can be used as an effective decision support tool in the evaluation of alternative urbanization scenarios in urban planning. The findings contribute to the sustainability of land management policies. Full article

Atmospheric turbulence severely degrades high-resolution satellite videos through spatiotemporally coupled distortions, including temporal jitter, spatial-variant blur, deformation, and scintillation, thereby constraining downstream analytical capabilities. Restoring turbulence-corrupted videos poses a challenging ill-posed inverse problem due to the inherent randomness of turbulent fluctuations. While existing turbulence mitigation methods for long-range imaging demonstrate partial success, they exhibit limited generalizability and interpretability in large-scale satellite scenarios. Inspired by refractive-index structure constant ($C_n^2$) estimation from degraded sequences, we propose a physics-informed turbulence signature (TS) prior that explicitly captures spatiotemporal distortion patterns to enhance model transparency. Integrating this prior into a lucky imaging framework, we develop a Physics-Based Turbulence Mitigation Network guided by Turbulence Signature (TMTS) to disentangle atmospheric disturbances from satellite videos. The framework employs deformable attention modules guided by turbulence signatures to correct geometric distortions, iterative gated mechanisms for temporal alignment stability, and adaptive multi-frame aggregation to address spatially varying blur. Comprehensive experiments on synthetic and real-world turbulence-degraded satellite videos demonstrate TMTS’s superiority, achieving 0.27 dB PSNR and 0.0015 SSIM improvements over the DATUM baseline while maintaining practical computational efficiency. By bridging turbulence physics with deep learning, our approach provides both performance enhancements and interpretable restoration mechanisms, offering a viable solution for operational satellite video processing under atmospheric disturbances. Full article

The Xixia Imperial Tombs (XITs) represent a crucial, yet still largely mysterious, component of the Tangut civilization’s legacy. Located in northwestern China, this extensive necropolis offers invaluable insights into the Tangut state, culture, and burial practices. This study employs an integrated approach utilizing multi-resolution and multi-temporal satellite remote sensing data, including Gaofen-2 (GF-2), Landsat-8 OLI, declassified GAMBIT imagery, and Google Earth, combined with deep learning techniques, to conduct a comprehensive archaeological investigation of the XITs’ burial landscape. We performed geomorphological analysis of the surrounding environment and automated identification and mapping of burial mounds and mausoleum features using YOLOv5, complemented by manual interpretation of very-high-resolution (VHR) satellite imagery. Spectral indices and image fusion techniques were applied to enhance the detection of archaeological features. Our findings demonstrated the efficacy of this combined methodology for archaeology prospect, providing valuable insights into the spatial layout, geomantic considerations, and preservation status of the XITs. Notably, the analysis of declassified GAMBIT imagery facilitated the identification of a suspected true location for the ninth imperial tomb (M9), a significant contribution to understanding Xixia history through remote sensing archaeology. This research provides a replicable framework for the detection and preservation of archaeological sites using readily available satellite data, underscoring the power of advanced remote sensing and machine learning in heritage studies. Full article

With the widespread application of deep learning in Earth observation, remote sensing image-based building change detection has achieved numerous groundbreaking advancements. However, differences across time periods caused by temporal variations in land cover, as well as the complex spatial structures in remote sensing scenes, significantly constrain the performance of change detection. To address these challenges, a change detection algorithm based on spatio-spectral information aggregation is proposed, which consists of two key modules: the Cross-Scale Heterogeneous Convolution module (CSHConv) and the Spatio-Spectral Information Fusion module (SSIF). CSHConv mitigates information loss caused by scale heterogeneity, thereby enhancing the effective utilization of multi-scale features. Meanwhile, SSIF models spatial and spectral information jointly, capturing interactions across different spatial scales and spectral domains. This investigation is illustrated with a case study conducted with the real-world dataset QL-CD (Qinling change detection), acquired in the Qinling region of China. The work includes the construction of QL-CD, which includes 12,724 pairs of images captured by the Gaofen-1 satellite. Experimental results demonstrate that the proposed approach outperforms a wide range of state-of-the-art algorithms. Full article

Increasing water demand and climate change exacerbate water management challenges in arid and semi-arid regions experiencing water scarcity resulting from low and irregular precipitation and high evapotranspiration. These regions rely on substantial water storage capacity, typically provided by large multi-purpose public reservoirs and small private reservoirs. While public reservoirs are typically monitored, the number, size, and private ownership of small reservoirs complicate effective storage monitoring, hindering efforts to assess water availability during droughts and to allocate water efficiently and equitably. Remote sensing provides a solution to complement existing monitoring systems by offering high spatial and temporal resolution observations. This study introduces a methodology for monitoring the surface area of large and small reservoirs based on optical and radar images from Sentinel-1 and Sentinel-2 satellites. The Normalized Difference Water Index (NDWI) and the Otsu image segmentation method are employed to identify and estimate water body areas, and the Google Earth Engine and programming languages are used to automate the process. The validation results demonstrated correlation for most reservoirs, with slight underestimations at flood peaks. Among the 17 large reservoirs, 16 had an R² value above 0.82, 12 had an RMSE value below 0.8, and 14 had a KGE value above 0.7. For the small reservoirs, the method correctly identified 3224 of the 6370 reservoirs recorded in situ, with greater accuracy in the classes of reservoirs with elevation above 10 m. A total of 7251 reservoirs were mapped, including 4027 not present in the database of the responsible regulatory entity, most with an area of less than 1.8 ha. Performance was better for larger areas (>3 ha), while small areas were underestimated. This methodology offers a practical water management tool adaptable for various-sized surface water bodies, including small, unmonitored water bodies. Full article

Aerosols play a crucial role in air quality, climate regulation, and public health; their timely monitoring is hence fundamental. The aerosol optical depth (AOD) is the parameter used to investigate the spatial–temporal distribution of aerosols from space. Specifically, the AOD retrieved from the Multi-Angle Implementation of Atmospheric Correction (MAIAC) algorithm applied to a Moderate Resolution Imaging Spectroradiometer (MODIS) is suitable for aerosol investigation at a local scale by exploiting its high spatial resolution (1 km × 1 km). In this study, the MAIAC AOD retrieval over Rome (Italy) was validated for the first time, using ground-based data provided by an AERONET station operating in a semi-rural environment close to the city, over a time series from January 2001 to December 2022. Moreover, AOD trends were evaluated in a study area encompassing Rome and its surroundings, characterized by a transition zone between urban and rural environments. The results show a general underestimation of the MAIAC AOD; specifically, the validation process highlighted the less accurate performance of the algorithm under higher aerosol loading and with predominantly coarse mode aerosol. Interesting results were obtained concerning the influence of the geometrical configuration of satellite acquisition on the accuracy of the MAIAC product. In particular, the solar zenith angle, the relative azimuth and the scattering angle between the principal plane of the sun and satellite synergistically influence retrievals. Finally, the spatial distribution of the AOD shows a decreasing trend over the 2001–2022 period and a strong influence of the city of Rome over the whole study area. Full article

Satellite cloud images exhibit complex multidimensional characteristics, including spectral, textural, and spatiotemporal dynamics. The temporal evolution of cloud systems plays a crucial role in accurate classification, particularly under the coexistence of multiple weather systems. However, most existing models—such as those based on convolutional neural networks (CNNs), Transformer architectures, and their variants like Swin Transformer—primarily focus on spatial modeling of static images and do not explicitly incorporate temporal information, thereby limiting their ability to effectively integrate spatiotemporal features. To address this limitation, we propose SIG-ShapeFormer, a novel classification model specifically designed for satellite cloud images with temporal continuity. To the best of our knowledge, this work is the first to transform satellite cloud data into multivariate time series and introduce a unified framework for multi-scale and multimodal feature fusion. SIG-Shapeformer consists of three core components: (1) a Shapelet-based module that captures discriminative and interpretable local temporal patterns; (2) a multi-scale Inception module combining 1D convolutions and Transformer encoders to extract temporal features across different scales; and (3) a differentially enhanced Gramian Angular Summation Field (GASF) module that converts time series into 2D texture representations, significantly improving the recognition of cloud internal structures. Experimental results demonstrate that SIG-ShapeFormer achieves a classification accuracy of 99.36% on the LSCIDMR-S dataset, outperforming the original ShapeFormer by 2.2% and outperforming other CNN- or Transformer-based models. Moreover, the model exhibits strong generalization performance on the UCM remote sensing dataset and several benchmark tasks from the UEA time-series archive. SIG-Shapeformer is particularly suitable for remote sensing applications involving continuous temporal sequences, such as extreme weather warnings and dynamic cloud system monitoring. However, it relies on temporally coherent input data and may perform suboptimally when applied to datasets with limited or irregular temporal resolution. Full article

The objective of this study is to detect the locations of submarine groundwater discharge (SGD) in the coastal area of the El Jebha region, located in northwestern Morocco. It is hypothesized that this zone is fed by one of the most rain-rich karstic aquifers in Morocco (the Dorsale Calcaire). The region’s geology is complex, characterized by multiple faults and fractures. Thermal remote sensing is used in this study to locate potential SGD zones, as groundwater emerging from karst systems is typically cooler than surrounding ocean water. Landsat satellite imagery was used to assess temperature variations and detect anomalies associated with the presence of freshwater in the marine environment. El Jebha’s geographical location, with a direct interface between limestone and sea, makes it an ideal site for the appearance of submarine groundwater discharges. This study constitutes the first use of Landsat-8/9 thermal-infrared imagery, processed with a multi-temporal fuzzy-overlay method, to detect SGD. Out of 107 Landsat scenes reviewed, 16 cloud-free images were selected. The workflow identified 18 persistent cold anomalies, of which three were classified as high-probability SGD zones based on recurrence and spatial consistency. The results highlight several potential SGD zones, confirming the cost-effectiveness of thermal remote sensing in mapping thermal anomalies and opening up new perspectives for the study of SGD in Morocco, where these phenomena remain rarely documented. Full article

The wheat stem sawfly (WSS, Cephus cinctus Norton) is a major insect pest of wheat (Triticum aestivum L.) in North America. Few management tactics exist, and quantifying their efficacy is confounded by the difficulty in monitoring infestation at the field scale. Accurate estimates of WSS infestation are cost prohibitive as they rely on comprehensive stem dissection surveys due to the concealed life cycle of the pest. Consolidating the available management tactics into an effective strategy requires inexpensive, spatially explicit estimates of WSS infestation that are compatible with the large field sizes dryland wheat is often sown to. Therefore, we investigated using multitemporal satellite passive remote sensing (RS) to estimate various metrics of WSS infestation collected from field surveys at the subfield scale. To achieve this, we dissected 43,155 individual stems collected from 1158 unique locations across 9 production wheat fields in Montana, USA. The dissected stem samples from each location were then quantified using the following metrics: the proportion of total WSS-infested stems, proportion of stems with more than one node burrowed through (adequate WSS infestations), and proportion of WSS cut stems only. Cloud-free Sentinel 2 images were collected from Google Earth Engine for each field from across the growing season and sparse multiway partial least squares regression was used to produce a model for total WSS infestations, adequate WSS infestations, and WSS cut stems, for each sampled field. Upon comparing the performance of these models, we found that, on average, the metrics for total (R² = 0.57) and adequate WSS infestations (R² = 0.57) were more accurately estimated than WSS cut (R² = 0.34). The results of this study indicate that multitemporal RS can help estimate total and adequate WSS infestations, but more holistic methods of field level sensing should be explored, especially for estimating WSS cutting. Full article

Ambient fine particulate matter of size less than 2.5 μm in aerodynamic diameter (PM_2.5) is a key ambient air pollutant that has been linked to numerous adverse health outcomes. Reliable estimates of PM_2.5 are important for supporting epidemiological and health impact assessment studies. Precise measurements of PM_2.5 are available through networks of monitors; however, these are spatially sparse and temporally incomplete. Chemical transport model (CTM) simulations and satellite-retrieved aerosol optical depth (AOD) measurements are two data sources that have been used to develop prediction models for PM_2.5 at fine spatial resolutions with increased spatial coverage. As part of the Multi-Angle Imager for Aerosols (MAIA) project, a geostatistical regression model has been developed to bias-correct AOD, followed by Bayesian ensemble averaging to gap-fill missing AOD values with CTM simulations. Here, we present a suite of statistical software (available in the R package ensembleDownscaleR) to facilitate the adaptation of this modeling approach to other settings and air quality modeling applications. We describe the Bayesian ensemble averaging approach, model specifications, estimation methods, and evaluation via cross-validation that is implemented in the software. We also provide a case study of estimating PM_2.5 using 2018 data from the Los Angeles metropolitan area with an accompanying tutorial. All code is fully reproducible and available on GitHub, data are made on Zenodo, and the ensembleDownscaleR package is available for download on GitHub. Full article

Novel view synthesis of remote sensing scenes from satellite images is a meaningful but challenging task. Due to the wide temporal span of image acquisition, satellite image collections often exhibit significant appearance variations, such as seasonal changes and shadow movements, as well as transient objects, making it difficult to reconstruct the original scene accurately. Previous work has noted that a large amount of image variation in satellite images is caused by changing light conditions. To address this, researchers have proposed incorporating the direction of solar rays into neural radiance fields (NeRF) to model the amount of sunlight reaching each point in the scene. However, this approach fails to effectively account for seasonal variations and suffers from a long training time and slow rendering speeds due to the need to evaluate numerous samples from the radiance field for each pixel. To achieve fast, efficient, and high-quality novel view synthesis for multi-temporal satellite scenes, we propose SatGS, a novel method that leverages 3D Gaussian points for scene reconstruction with an appearance-adaptive adjustment strategy. This strategy enables our model to adaptively adjust the seasonal appearance features and shadow regions of the rendered images based on the appearance characteristics of the training images and solar angles. Additionally, the impact of transient objects is mitigated through the use of visibility maps and uncertainty optimization. Experiments conducted on WorldView-3 images demonstrate that SatGS not only renders superior image quality compared to existing State-of-the-Art methods but also surpasses them in rendering speed, showcasing its potential for practical applications in remote sensing. Full article

In the context of sea levels rising, monitoring spatial and temporal topographic changes along coastal dunes is crucial to understand their dynamics since they represent natural barriers against coastal flooding and large sources of sediment that can mitigate coastal erosion. Different technologies are currently used to monitor coastal dune topographic changes (GNSS, UAV, airborne LiDAR, etc.). Satellites recently emerged as a new source of topographic data by providing high-resolution images with a rather short revisit time at the global scale. Stereoscopic or tri-stereoscopic acquisition of some of these images enables the creation of 3D models using stereophotogrammetry methods. Here, the Ames Stereo Pipeline was used to produce digital elevation models (DEMs) from tri-stereo panchromatic and high-resolution Pleiades images along three 19 km long stretches of coastal dunes in SW France. The vertical errors of the Pleiades-derived DEMs were assessed by comparing them with DEMs produced from airborne LiDAR data collected a few months apart from the Pleiades images in 2017 and 2021 at the same three study sites. Results showed that the Pleiades-derived DEMs could reproduce the overall dune topography well, with averaged root mean square errors that ranged from 0.5 to 1.1 m for the six sets of tri-stereo images. The differences between DEMs also showed that Pleiades images can be used to monitor multi-annual coastal dune morphological changes. Strong erosion and accretion patterns over spatial scales ranging from hundreds of meters (e.g., blowouts) to tens of kilometers (e.g., dune retreat) were captured well, and allowed to quantify changes with reasonable errors (30%). Furthermore, relatively small averaged root mean square errors (0.63 m) can be obtained with a limited number of field-collected elevation points (five ground control points) to perform a simple vertical correction on the generated Pleiades DEMs. Among different potential sources of errors, shadow areas due to the steepness of the dune stoss slope and crest, along with planimetric errors that can also occur due to the steepness of the terrain, remain the major causes of errors still limiting accurate enough volumetric change assessment. However, ongoing improvements on the stereo matching algorithms and spatial resolution of the satellite sensors (e.g., Pleiades Neo) highlight the growing potential of Pleiades images as a cost-effective alternative to other mapping techniques of coastal dune topography. Full article

Small landscape elements are critical in ecological systems, encompassing vegetated and non-vegetated features. As vegetated elements, hedgerows contribute significantly to biodiversity conservation, erosion protection, and wind speed reduction within agroecosystems. This study focuses on the semi-automatic extraction of hedgerows by applying the Object-Based Image Analysis (OBIA) approach to two multispectral satellite datasets. Multitemporal image data from PlanetScope and Copernicus Sentinel-2 have been used to test the applicability of the proposed approach for detailed land cover mapping, with an emphasis on extracting Small Woody Elements. This study demonstrates significant results in classifying and extracting hedgerows, a smaller landscape element, from both Sentinel-2 and PlanetScope images. A good overall accuracy (OA) was obtained using PlanetScope data (OA = 95%) and Sentinel-2 data (OA = 85%), despite the coarser resolution of the latter. This will undoubtedly demonstrate the effectiveness of the OBIA approach in leveraging freely available image data for detailed land cover mapping, particularly in identifying and classifying hedgerows, thus supporting biodiversity conservation and ecological infrastructure enhancement. Full article

Distinguishing vegetation types from satellite images has long been a goal of remote sensing, and the combination of multi-source and multi-temporal remote sensing images for vegetation classification is currently a hot topic in the field. In species-rich mountainous environments, this study selected four remote sensing images from different seasons (two aerial images, one WorldView-2 image, and one UAV image) and proposed a vegetation classification method integrating hierarchical extraction and object-oriented approaches for 11 vegetation types. This method innovatively combines the Random Forest algorithm with a decision tree model, constructing a hierarchical strategy based on multi-temporal feature combinations to progressively address the challenge of distinguishing vegetation types with similar spectral characteristics. Compared to traditional single-temporal classification methods, our approach significantly enhances classification accuracy through multi-temporal feature fusion and comparative experimental validation, offering a novel technical framework for fine-grained vegetation classification under complex land cover conditions. To validate the effectiveness of multi-temporal features, we additionally performed Random Forest classifications on the four individual remote sensing images. The results indicate that (1) for single-temporal images classification, the best classification performance was achieved with autumn images, reaching an overall classification accuracy of 72.36%, while spring images had the worst performance, with an accuracy of only 58.79%; (2) the overall classification accuracy based on multi-temporal features reached 89.10%, which is an improvement of 16.74% compared to the best single-temporal classification (autumn). Notably, the producer accuracy for species such as Quercus acutissima Carr., Tea plantations, Camellia sinensis (L.) Kuntze, Pinus taeda L., Phyllostachys spectabilis C.D.Chu et C.S.Chao, Pinus thunbergii Parl., and Castanea mollissima Blume all exceeded 90%, indicating a relatively ideal classification outcome. Full article

Monitoring volumetric glacier change requires cost-effective and accessible methods to generate multi-temporal digital elevation models (DEMs). We present Planet4Stereo, an open-source photogrammetry pipeline developed to generate DEMs from low-cost PlanetScope images, exploiting the high temporal repetition rate of the constellation for stereo reconstruction. Our approach enables multi-temporal 3D change detection using the freely available NASA Ames Stereo Pipeline (ASP), making the pipeline particularly valuable for geoscientists. We applied Planet4Stereo in two case studies: the Shisper glacier (Karakoram, Pakistan) for surge investigation and the Bøverbrean glacier (Smørstabb Massif, Norway) for change detection. The results from Shisper are in good agreement with previous studies using the same images but proprietary methods. The accuracy of the DEM of Bøverbrean was evaluated using high-precision LiDAR data, revealing varying deviations across terrain types, with higher errors in steep shadowed areas. Additionally, the change detection analysis confirmed the expected glacier retreat. Our results show that Planet4Stereo produces DEMs with comparable accuracy to commercial software and is freely accessible and easy to use. As both ASP and the PlanetScope satellites evolve, future work could refine the pipeline’s stereo-matching capabilities and evaluate its performance with next-generation satellite data. Full article