Search Results (12)

Interest in improved disposal pathways and proliferation-resistant systems for used nuclear fuel recycling has driven research on monoamide extractants. Existing comparisons against the industry standard, tributyl phosphate (TBP), emphasize a fundamental approach and span a wide range of test conditions. This work narrows that range and addresses process-scale considerations by presenting hydrodynamic performance results alongside extraction capacity at optimized conditions. The monoamide solvents, 1.0 M DEHiBA (N,N-di(2-ethylhexyl)isobutanamide), 1.5 M DEHBA (N,N-di(2-ethylhexyl)butanamide), and 1.5 M DEHDMPA (N,N-di(2-ethylhexyl)-2,2-dimethylpropanamide), are compared to 1.1 M TBP in bench-scale extraction tests with nitric acid (2–6 M) and uranium (∼0.8 M). Performance is assessed with distribution ratios and dispersion number ratings and supported by specific gravity and viscosity measurements. DEHBA and DEHDMPA exhibited inadequate coalescence behavior with failed or poor dispersion ratings despite uranium distribution ratios of 2.06 ± 0.03 and 0.86 ± 0.01 at O/A = 1.9, limiting suitability for process application. TBP and DEHiBA maintained adequate dispersion ratings across all conditions tested, with maximum distribution ratios of 4.37 ± 0.08 at O/A = 2.6 and 0.67 ± 0.01 at O/A = 2.9, respectively. Higher viscosity values for DEHBA (5.21 cP ± 0.3%) and DEHDMPA (6.53 cP ± 0.4%) relative to TBP (2.04 cP ± 0.4%) and DEHiBA (3.18 cP ± 0.4%) correlate with observed coalescence deficiencies. The methods presented in this work demonstrate the significance of evaluation beyond extraction capacity. Full article

Perimidine derivatives are versatile heterocycles with growing significance in medicinal chemistry and materials sciences. However, their structural variety remains limited. This study focused on the synthesis and crystal structure characterization of a new perimidine-based molecule. A bicyclic perimidine lactone, (1S,4R)-4,7,7-trimethyl-1-(1H-perimidin-2-yl)-2-oxabicyclo[2.2.1]heptan-3-one (1), was synthesized through an intramolecular dehydration of a monoamide intermediate formed from 1,8-diaminonaphthalene and (1S)-(–)-camphanic chloride under basic conditions. The product was purified and crystallized from acetone, giving single crystals suitable for X-ray diffraction. Structural analysis revealed two stereogenic centers and crystallization in the chiral tetragonal P4₃2₁2 space group, with stabilization through N—H···O and C—H···N hydrogen bonds as well as C—H···π interactions. Full article

The class of diamino-naphthalene exhibits antioxidant properties, which are partly related to the relative positions of the two amino groups. This study demonstrates how the reactivity of one of these compounds, 1,5-diamino-naphthalene (DAN), can be adjusted by introducing a single amide bond through a simple thermal coupling with l-pyroglutamic acid (PyroGlu). The solventless thermal reaction between PyroGlu and DAN at 160 °C yielded a new mono-pyroglutanilide compound (PyroDAN) that was characterized using various analytical techniques, including a thermal and infrared analysis, HRMS (ESI), and one- (1D) and two-dimensional (2D) NMR. The optical properties were investigated using UV-Vis and fluorescence spectroscopy. Additionally, two chemical standard assays were used to measure both the antioxidant and pro-oxidant properties of PyroDAN. The molecule has shown nearly negligible pro-oxidant activity, while a mild antioxidant activity is still retained. These findings indicate that the transformation of DAN into a mono-pyroglutanilide derivative breaks the original molecular symmetry and effectively modifies the electronic distribution of the aromatic system, suppressing the oxidant properties while keeping a mild antioxidant activity. Furthermore, the tuneable fluorescent properties of PyroDAN—the mild antioxidant activity and the inhibition of the cytologically harmful pro-oxidant properties—suggest promising applications in bioimaging and other biological fields. Full article

Herein we report a feasible study concerning the synthesis and the in vitro antimicrobial activity of some new homodrimane sesquiterpenoids with a benzimidazole unit. Based on some homodrimane carboxylic acids, on their acyl chlorides and intermediate monoamides, a series of seven N-homodrimenoyl-2-amino-1,3-benzimidazoles and 2-homodrimenyl-1,3-benzimidazoles was synthesized. The syntheses involved the decarboxylative cyclization and condensation of the said acids or acyl chlorides with o-phenylendiamine and 2-aminobenzimidazole, as well as the p-TsOH-mediated cyclodehydration of the said monoacylamides. The structures of the synthesized compounds have been fully confirmed, including by the X-ray diffraction. Their biological activities were evaluated on five species of fungi (Aspergillus niger, Fusarium solani, Penicillium chrysogenum, P. frequentans, and Alternaria alternata) and two strains of bacteria (Bacillus sp. and Pseudomonas aeruginosa). Compounds 7 and 20 showed higher antifungal (MIC = 0.064 and 0.05 μg/mL) and antibacterial (MIC = 0.05 and 0.032 μg/mL) activities compared to those of the standards: caspofungin (MIC = 0.32 μg/mL) and kanamycin (MIC = 2.0 μg/mL), and compounds 4, 10, 14, and 19 had moderate activities. Full article

Based on the previously reported involvement of homophthalic acid monoesters in the Castagnoli–Cushman reaction-type cyclocondensation with imines, we tested a number of other o-methyl benzoic acids bearing various electron-withdrawing groups in the α-position. The majority of these substrates delivered the expected tetrahydroisoquinolone adducts on activation with CDI or acetic anhydride. Homophthalic acid mononitriles displayed the highest promise as substrates for the new reaction, both in terms of scope and product yields. Homophthalic acid monoamides either gave low yields or failed to react with imines. Sulfonyl-substituted substrates gave the desired (and hitherto unknown) type of tetrahydroisoquinolines. Despite the low yields, this approach to sulfonyl-substituted tetrahydroisoquinolines appears practical as alternative syntheses based on the traditional, carboxylic acid CCR adducts would presumably be cumbersome and multistep. The azido- and nitro-substituted o-methyl benzoic acids failed to react with imines. Full article

Some organic compounds are known to self-assemble into nanotubes in solutions, but the packing of the molecules into the walls of the tubes is known only in a very few cases. Herein, we study two compounds forming nanotubes in alkanes. They bear a secondary alkanamide chain linked to a benzoic acid propyl ester (HUB-3) or to a butyl ester (HUB-4). They gel alkanes for concentrations above 0.2 wt.%. The structures of these gels, studied by freeze fracture electron microscopy, exhibit nanotubes: for HUB-3 their external diameters are polydisperse with a mean value of 33.3 nm; for HUB-4, they are less disperse with a mean value of 25.6 nm. The structure of the gel was investigated by small- and wide-angle X-ray scattering. The evolution of the intensities show that the tubes are metastable and transit slowly toward crystals. The intensities of the tubes of HUB-4 feature up to six oscillations. The shape of the intensities proves the tubular structure of the aggregates, and gives a measurement of 20.6 nm for the outer diameters and 11.0 nm for the inner diameters. It also shows that the electron density in the wall of the tubes is heterogeneous and is well described by a model with three layers. Full article

Nine monoamides were synthesized from carboxylic acids (C8–C18) and crude glycerol. The final monoamides were the result of a rearrangement of the acyl chain during the final hydrogenation process. The purity of the final compounds was determined by spectroscopic and mass spectrometry (MS) techniques. The thermophysical properties of solid monoamides were investigated to determine their capability to act as phase change materials (PCM) in thermal energy storage. Thermophysical properties were determined with a differential scanning calorimeter (DSC). The melting temperatures of the analyzed material ranged from 62.2 °C to 116.4 °C. The analyzed enthalpy of these monoamides ranged from 25.8 kJ/kg to 149.7 kJ/kg. Enthalpy values are analyzed considering the carbon chain and the formation of hydrogen bonds. Full article

Poly(styrene-co-maleic anhydride)s were modified with poly(propylene oxide (PO)-co-ethylene oxide (EO)) side chains (Jeffamine^®) with different EO/PO molar ratios, varying between 0.11 and 3.60. These copolymers were then further functionalized with a β-mercapto ketone of δ-damascone. The obtained poly(maleic acid monoamide)-based β-mercapto ketones were then studied as delivery systems for the controlled release of δ-damascone by retro 1,4-addition. The release of δ-damascone, a volatile, bioactive molecule of the family of rose ketones, was studied by dynamic headspace analysis above a cotton surface after deposition of a cationic surfactant containing fabric softening formulation, as a function of the ethylene oxide (EO)/propylene oxide (PO) molar ratio of the grafted copolymer side chains. The polarity of the EO/PO side chain influenced the release efficiency of the damascone in a typical fabric softening application. PO-rich copolymers and the corresponding poly(styrene-co-maleic anhydride) without Jeffamine^® side chains were found to be less efficient for the desired fragrance release than the corresponding bioconjugate with a EO/PO ratio of 3.60 in the side chain. This copolymer conjugate seemed to represent a suitable balance between hydrophilicity and hydrophobicity to favor the release of the δ-damascone and to improve the deposition of the conjugate from an aqueous environment onto a cotton surface. Full article

Following our studies on the gastroprotective effect and cytotoxicity of terpene derivatives, new amides were prepared from the diterpene 8(17)-labden-15,19-dioic acid (junicedric acid) and its 8(9)-en isomer with C-protected amino acids (amino acid esters). The new compounds were evaluated for their gastroprotective effect in the ethanol/HCl-induced gastric lesions model in mice, as well as for cytotoxicity using the following human cell lines: normal lung fibroblasts (MRC-5), gastric adenocarcinoma cells (AGS) and liver hepatocellular carcinoma (Hep G2). A dose-response experiment showed that at 25 mg/kg the C-15 leucyl and C-15,19-dileucylester amides of junicedric acid reduced gastric lesions by about 65.6 and 49.6%, respectively, with an effect comparable to lansoprazole at 20 mg/kg (79.3% lesion reduction). The comparison of the gastroprotective effect of 18 new amino acid ester amides was carried out at a single oral dose of 25 mg/kg. Several compounds presented a strong gastroprotective effect, reducing gastric lesions in the 70.9-87.8% range. The diprolyl derivative of junicedric acid, the most active product of this study (87.8% lesion reduction at 25 mg/kg) presented a cytotoxicity value comparable with that of the reference compound lansoprazole. The structure-activity relationships are discussed. Full article

Condensation of 1-acetyl-1,2,3,4-tetrahydro-9H-carbazole (2) with some amino compounds furnished the corresponding imino derivatives 3a-e. Compound 3a reacted with chloroacetic acid and underwent cyclization to give the thiazolidine derivative 5. Also, treatment of 3c with thionyl chloride caused cyclization to yield the [1,2,6]thiadiazino derivative 6, which gave the corresponding N-formyl derivative 7 upon heating with ethyl formate. In addition, interaction of 3d with ethyl cyanoacetate yielded the monoamide of malonic acid derivative 8. Acylation of carbazole 1 with succinoyl chloride or phenylacetyl choride produced the corresponding azepine (11) and 1,9-diphenyl acetyl derivatives (14), respectively. Compounds 11, 14 were further reacted to give the carbazole derivatives 12, 13 and 15a,b. The cytotoxic activity for some of the prepared compounds against breast cancer B₂₀ is discussed. Full article

HPCD inhibits the hydrolysis reaction of monoamides and monoesters of phthalic and maleic acid at pH 2. The magnitude of inhibition depends on the leaving group. For some of the substrates, the reaction in the cavity is more than 100 times slower than that in solution. Full article