Search Results (40)

In the absence of appropriate tools and a knowledge base for exploring high-grade metamorphic terrains, felsic gneiss complexes at granulite facies have long been considered barren and have remained undermapped and understudied. This was the case of the Bondy gneiss complex in the southwestern Grenville Province of Canada which consists of 1.39–1.35 Ga volcanic and plutonic rocks metamorphosed under granulite facies conditions at 1.19 Ga. Iron oxide–apatite and Cu-Ag-Au mineral occurrences occur among gneisses rich in biotite, cordierite, garnet, K-feldspar, orthopyroxene and/or sillimanite-rich gneisses, plagioclase-cordierite-orthopyroxene white gneisses, magnetite-garnet-rich gneisses, garnetites, hyperaluminous sillimanite-pyrite-quartz gneisses, phlogopite-sillimanite gneisses, and tourmalinites. Petrological and geochemical studies indicate that the precursors of these gneisses are altered volcanic and volcaniclastic rocks with attributes of pre-metamorphic Na, Ca-Fe, K-Fe, K, chloritic, argillic, phyllic, advanced argillic and skarn alteration. The nature of these hydrothermal rocks and the ore deposit model that best represents them are further investigated herein through lithogeochemistry. The lithofacies mineralized in Cu (±Au, Ag, Zn) are distinguished by the presence of garnet, magnetite and zircon, and exhibit pronounced enrichment in Fe, Mg, HREE and Zr relative to the least-altered rocks. In discrimination diagrams, the metamorphosed mineral system is demonstrated to exhibit the diagnostic attributes of, and is interpreted as, a metasomatic iron and alkali-calcic (MIAC) mineral system with iron oxide–apatite (IOA) and iron oxide copper–gold (IOCG) mineralization that evolves toward an epithermal cap. This contribution demonstrates that alteration facies diagnostic of MIAC systems and their IOCG and IOA mineralization remain diagnostic even after high-grade metamorphism. Exploration strategies can thus use the lithogeochemical footprint and the distribution and types of alteration facies observed as pathfinders for the facies-specific deposit types of MIAC systems. Full article

Rammed earth (RE), a traditional material aligned with circular economy (CE) principles, has been gaining renewed interest in contemporary construction due to its low environmental impact and compatibility with sustainable building strategies. Though not a modern invention, it is being reintroduced in response to the increasingly strict European Union (EU) regulations on carbon footprint, life cycle performance, and thermal efficiency. RE walls offer multiple benefits, including humidity regulation, thermal mass, plasticity, and structural strength. This study also draws attention to their often-overlooked ability to mitigate indoor overheating. To preserve these advantages while enhancing thermal performance, this study explores insulation strategies that maintain the vapor-permeable nature of RE walls. A parametric analysis using Delphin 6.1 software was conducted to simulate heat and moisture transfer in two main configurations: (a) a ventilated system insulated with mineral wool (MW), wood wool (WW), hemp shives (HS), and cellulose fiber (CF), protected by a jute mat wind barrier and finished with wooden cladding; (b) a closed system using MW and WW panels finished with lime plaster. In both cases, clay plaster was applied on the interior side. The results reveal distinct hygrothermal behavior among the insulation types and confirm the potential of natural, low-processed materials to support thermal comfort, moisture buffering, and the alignment with CE objectives in energy-efficient construction. Full article

This study utilizes EnMAP hyperspectral satellite data to map the mineralogical footprints of hydrocarbon microseepage systems induced in the Upper-Red Formation (URF), a clastic Upper Miocene sedimentary sequence in the Qom region (Iran) affected by petroleum leakage from the underlying Alborz reservoir. The Level 2A surface reflectance product of EnMAP was processed using spectral matching and polynomial fitting techniques to characterize diagnostic absorption features associated with microseepage-induced alteration minerals. The identified mineralogical changes include partial to complete bleaching of hematite from redbeds, the formation of secondary goethite, and the development of montmorillonite, calcite, and Fe²⁺-bearing chlorite across the affected zones. Compared to previous studies conducted using ASTER and Sentinel-2 multispectral data, EnMAP demonstrated superior performance in identifying mineralogy and delineating petroleum-affected zones, with results aligning closely with field observations and laboratory spectroscopy. This study highlights the advantages of EnMAP hyperspectral data for mapping diagenetic mineralogical alterations induced in sedimentary strata, facilitating remote sensing-based detection of microseepage, and advancing petroleum exploration in exposed terrains. Full article

Metasomatic iron and alkali-calcic (MIAC) mineral systems form district-scale metasomatic footprints in the upper crust that are genetically associated with iron oxide–apatite (IOA), iron oxide and iron sulfide copper–gold (IOCG, ISCG), skarn, and affiliated critical and precious metal deposits. The development of MIAC systems is characterized by series of alteration facies that form key mappable entities in the field and along drill cores. Each facies can precipitate deposit types specific to the facies or host deposits formed at a subsequent facies. Defining the spatial and temporal relations between alteration facies and host rocks as well as with pre, syn, and post MIAC magmatic, tectonic, and mineralization events is essential to understanding the evolution of a MIAC system and to evaluating its overall mineral prospectivity. This paper proposes an ontology for MIAC systems that frames the key characteristics of the main alteration facies described and links it to a taxonomy and descriptive lexicons that allow the user to build an efficient data collection system tailored to the description of MIAC systems. The application developed by the Geological Survey of Canada for collecting field data is used as an example. The data collection system, including the application for collecting field data and the lexicons, are applicable to regional- and deposit-scale geological mapping as well as to drill core logging. They respond to the need for the metallogenic mapping of mineral systems and the development of more robust mineral prospectivity maps and exploration strategies for the discovery of critical and precious metal resources in MIAC systems. Full article

Sustainable agriculture increasingly relies on strategies that improve soil fertility while reducing the environmental footprint of chemical inputs. The primary objective of this research was to disentangle the individual and combined effects of crop rotation and fertilization on soil quality. This study aimed to determine whether the effectiveness of fertilization was modified by rotational practices—exploring whether these interactions were additive, antagonistic, or synergistic. This study assessed the impact of two-year open-field crop rotations—broccoli–tomato and broccoli–pepper—combined with organic and mineral fertilization on soil chemical and biological properties. Treatments included sulfur bentonite enriched with orange waste (SBO), horse manure (HM), mineral fertilizer (NPK), and an unfertilized control (CTR). Soil samples were collected after each crop cycle and analyzed for enzymatic activities (fluorescein diacetate hydrolase, dehydrogenase, catalase), microbial biomass carbon (MBC), organic matter, total nitrogen, and macro- and micronutrient content. The results showed that organic amendments, particularly SBO and HM, significantly increased microbial activity, MBC, and nutrient availability compared to NPK and CTR. Organic treatments also led to a reduction in soil pH (−12%) and a more balanced ionic profile, enhancing soil biological fertility across both rotations. By contrast, the NPK treatments favored higher nitrate and chloride concentrations (3.5 and 4.6 mg * g⁻¹ dw, respectively) but did not improve biological indicators. Improvements were more pronounced in the second crop cycle, suggesting the cumulative benefits of organic amendments over time. These findings highlight the potential of combining organic fertilization with crop rotation to enhance soil health and support long-term sustainability in horticultural systems. Full article

The increasing global population, projected to exceed 9.1 billion by 2050, presents a critical challenge for sustainable food production. Edible insects have emerged as a promising alternative protein source due to their high nutritional value, low environmental footprint, and efficient resource utilization. This review explores the opportunities and challenges of integrating edible insects into food systems. Benefits include their high protein content and quality, low greenhouse gas emissions, low-cost production, and ability to thrive on organic waste. Furthermore, edible insect cultivation requires significantly less land and water compared to traditional livestock. Edible insects are nutritionally rich, containing substantial amounts of essential amino acids, unsaturated fatty acids, and minerals. However, barriers to widespread adoption persist, such as cultural perceptions, regulatory hurdles, potential allergenicity, and biological and chemical contamination. Furthermore, standardizing rearing practices and ensuring food safety are critical for broader adoption. While edible insects represent a nutritious, low-cost food and feed, there are a lot of variables that have not been fully investigated. Only after further research, promising results, and solutions that are relatively easy to apply might edible insects be considered a sustainable food source. Considering the challenges that may arise by 2050, more intensive research is highly advised. Full article

Worldwide, a growing list of critical (Bi, Co, Cu, F, Fe, Mo, Ni, P, PGE, REE, W, U, and Zn) and precious metal (Ag and Au) resources have been identified in mineral systems forming Fe-oxide-copper-gold (IOCG) deposits; Fe-oxide-apatite (IOA); Fe-sulfide Cu-Au (ISCG); and affiliated W skarn; Fe-rich Au-Co-Bi or Ni; albitite-hosted U or Au ± Co; and five-element (Ag, As, Co, Ni, and U) vein deposits. This paper frames the genesis of this metallogenic diversity by defining the Metasomatic Iron and Alkali-Calcic (MIAC) mineral system and classifying its spectrum of Fe-rich-to-Fe-poor and alkali-calcic deposits. The metasomatic footprint of MIAC systems consists of six main alteration facies, each recording a distinct stage of mineralization as systems have evolved. The fluid flow pathways and the thermal and chemical gradients inferred from the space–time distribution of the alteration facies within a system are best explained by the ascent and lateral propagation of a voluminous hypersaline fluid plume. The primary fluid plume evolves, chemically and physically, as metasomatism progresses and through periodic ingresses of secondary fluids into the plume. Exploration strategies can take advantage of the predictability and the expanded range of exploration targets that the MIAC system framework offers, the building blocks of which are the alteration facies as mappable prospectivity criteria for the facies-specific critical and precious metal deposits the systems generate. Global case studies demonstrate that these criteria are applicable to MIAC systems worldwide. Full article

The global construction industry heavily relies on cementitious systems, which are a major contributor to carbon dioxide emissions due to the energy-intensive nature of cement production. These emissions account for approximately 8% of global CO₂ output, exacerbating climate change and environmental degradation. The global reliance on cementitious systems has led to substantial carbon dioxide emissions during cement production, intensifying the need for environmentally sustainable alternatives. Turkey, which holds 73% of the world’s boron reserves, offers a unique opportunity to explore boron-based minerals like colemanite as potential replacements for cement. In this study, the effects of colemanite (a boron mineral) and four fiber types—steel, basalt, carbon, and polypropylene—on the compressive strength, flexural strength, and water absorption of mortar mixtures incorporating air-entraining admixtures were investigated. All mixtures contained 0.1% air-entraining admixture (by cement weight), with fixed parameters: a water/binder ratio of 0.485, a sand/binder ratio of 2.75, and slump-flow values of 190 ± 20 mm. Cement was partially replaced with colemanite at 3% and 5%, while fibers were added at 0.5% by volume. Fresh-state properties (slump-flow and admixture requirements) and hardened-state properties (28-day compressive/flexural strength and water absorption) were evaluated. Selected samples underwent SEM analysis for microstructural assessment. Key findings revealed that both colemanite and fibers increased admixture demand to achieve target slump flow. While colemanite and fibers collectively enhanced compressive strength, their interactions varied: basalt and carbon fibers exhibited superior performance in mixtures without colemanite, whereas steel fibers showed greater efficacy in colemanite-containing mixtures. The strength increase was less pronounced when colemanite was introduced to mixtures containing carbon, polypropylene fibers, and basalt. The trend of flexural strengths was comparable to that of compressive strengths. SEM images revealed that the void distribution in the samples, influenced by the effects of colemanite and fibers, had a more dominant effect on compressive and flexural strengths. Water absorption inversely correlated with mechanical performance. This study not only contributes to reducing the carbon footprint of cementitious systems by partially replacing cement with colemanite but also provides practical insights to optimize the use of fibers to increase strength performance and reduce water absorption properties from durability parameters. These findings support the development of more sustainable and durable materials. Full article

Characterizing alteration and its geochemical signature provides critical information relevant to ore-deposit genesis and its related footprint; for porphyry-type deposits, zoned potassic-phyllic-propylitic alteration and metal enrichment are critical features. Here we integrate earlier lithological and mineralogical studies of the (10+ Moz Au) Archean Côté Gold porphyry-type Au(-Cu) deposit (Ontario, Canada) with identified alteration types to provide exploration vectors. The ca. 2740 tonalite-quartz diorite-diorite intrusive complex and co-temporal Au(-Cu) mineralization as disseminations, breccias and veins are co-spatial with ore-related alteration types (amphibole, biotite, muscovite). An early, locally developed amphibole event coring the deposit is followed by emplacement of a Au(-Cu) mineralized biotite-rich magmatic-hydrothermal breccia body and broad halo of disseminated biotite and quartz veining. These rocks record gains via mass balance calculations of K, Fe, Mg, LILE, and LREE with Au, Cu, Mo, Ag, Se and Bi. Later muscovite alteration is enriched in K, Rb, Cs, Ba, CO₂, and LOI with varied Au, Cu, Mo, Te, As, and Bi values. A strong albite overprint records extreme Na gains with the loss of most other elements, including ore metals (i.e., Au, Cu). Together these data define an Au-Cu-Mo-Ag-Te-Bi-Se core co-spatial with biotite breccia versus a peripheral stockwork and sheeted vein zone with a Te-Se-Zn-Pb-As association. These features further support the posited porphyry-type model for the Côté Gold Au(-Cu) deposit. Full article

The increasing global demand for critical minerals, driven by rapid population growth and the widespread adoption of low-carbon technologies, electric vehicles, and clean energy systems, highlights the urgent need for sustainable resource management. Mine tailings, traditionally considered waste, are now being recognized as valuable secondary sources for mineral recovery. This paper compiles a comprehensive review of the four short- and mid-term critical minerals (lithium, cobalt, nickel, and rare earth elements) and provides insights regarding their recovery with a focus on the latest technological advancements. By exploring key innovations in separation processes, the review demonstrates how these technologies are addressing supply chain bottlenecks while simultaneously reducing the environmental footprint of mining operations. The paper also advocates for a holistic approach to mine waste management, integrating mineral recovery with environmental remediation. It emphasizes the dual benefits of recovering valuable resources while purifying contaminated water and mitigating pollution risks. The proposed circular economy model suggests a sustainable blueprint for managing mine tailings, emphasizing resource reuse, waste reduction, and economic viability. Full article

This strategic review examines the pivotal role of sustainable methodologies in battery recycling and the recovery of critical minerals from waste batteries, emphasizing the need to address existing technical and environmental challenges. Through a systematic analysis, it explores the application of green organic solvents in mineral processing, advocating for establishing eco-friendly techniques aimed at clipping waste and boosting resource utilization. The escalating demand for and shortage of essential minerals including copper, cobalt, lithium, and nickel are comprehensively analyzed and forecasted for 2023, 2030, and 2040. Traditional extraction techniques, including hydrometallurgical, pyrometallurgical, and bio-metallurgical processes, are efficient but pose substantial environmental hazards and contribute to resource scarcity. The concept of green extraction arises as a crucial step towards ecological conservation, integrating sustainable practices to lessen the environmental footprint of mineral extraction. The advancement of green organic solvents, notably ionic liquids and deep eutectic solvents, is examined, highlighting their attributes of minimal toxicity, biodegradability, and superior efficacy, thus presenting great potential in transforming the sector. The emergence of organic solvents such as palm oil, 1-octanol, and Span 80 is recognized, with advantageous low solubility and adaptability to varying temperatures. Kinetic (mainly temperature) data of different deep eutectic solvents are extracted from previous studies and computed with machine learning techniques. The coefficient of determination and mean squared error reveal the accuracy of experimental and computed data. In essence, this study seeks to inspire ongoing efforts to navigate impediments, embrace technological advancements including artificial intelligence, and foster an ethos of environmental stewardship in the sustainable extraction and recycling of critical metals from waste batteries. Full article

This study explores the potential of novel feed ingredients for monogastric animals, such as pigs and poultry, to enhance meat quality and nutritional value while reducing the environmental footprint of production. Innovative feed options like black soldier fly larvae, Schizochytrium microalga, Laminaria seaweed, fermented soybean hulls, fortified flaxseed and grape pomace have significantly improved meat quality and nutritional traits. Results indicate that these ingredients enrich meat with omega-3 fatty acids, antioxidants, vitamins and minerals, enhancing nutritional value while improving sensory traits such as flavour, tenderness and colour. For instance, including Laminaria seaweed increased iodine content by up to 45%, while Schizochytrium microalga improved omega-3 deposition by over 70%. The inclusion of grape pomace enhanced oxidative stability and extended meat shelf life. This review also discusses the influence of ingredient composition, inclusion levels and processing techniques, alongside challenges such as regulatory constraints, ingredient cost and palatability. The alignment of these alternative feeds with circular economy principles and sustainability goals further emphasizes their role in reducing environmental impact. By summarising recent advancements, this paper underscores the transformative potential of novel feed ingredients in advancing monogastric meat production towards greater nutritional quality, sustainability and consumer acceptance. Full article

This study presents a comparative analysis of titanium leaching from tionite (a byproduct of the titanium dioxide production process) and carbothermally reduced red mud (derived from aluminum residues). Tionites from the sulfate process and red mud residue are known for their environmental impacts due to their metal content and acidic/basic nature. This study explored leaching as a method to recover titanium and other metals under high-pressure and high-temperature conditions using sulfuric acid. Experiments were conducted in an autoclave with different parameter changes, like varying oxygen pressure, temperature, and reaction time to optimize metal extraction. The leaching efficiency of titanium was found to be higher in the carbothermal-reduced slag compared to tionite due to the altered mineral phases in the reduced material. XRD and SEM-EDS analyses confirmed the differing leaching behaviors, with titanium compounds in tionite showing greater resistance to dissolution. These findings highlight the importance of thermal pre-treatment for optimizing metal recovery from industrial residues. The main aim of this study is to contribute to the development of sustainable waste management solutions for tionites and red mud, emphasizing the potential of hydrometallurgical methods for metal recovery. The results are expected to inform future research and industrial applications, advancing the recovery of valuable metals while reducing the environmental footprint of titanium and aluminum residue disposal. Full article

Ladle furnace slag (LFS), a by-product of steel refining, shows a promising reuse pathway as an alternative additive or substitute for Portland cement due to its high alkalinity and similar chemical composition to clinkers. However, LFS is often stored in large, open surface areas, leading to many environmental issues. To tackle waste management challenges, LFS can be recycled as supplementary cementitious material (SCM) in many cementitious composites. However, LFS contains some mineral phases that hinder its reactivity (dicalcium silicate (γ-C₂S)) and pose long-term durability issues in the cured cemented final product (free lime (f-CaO) and free magnesia (f-MgO)). Therefore, LFS needs to be adequately treated to enhance its reactivity and ensure long-term durability in the structures of the cementitious materials. This literature review assesses possible LFS treatments to enhance its suitability for valorization. Traditional reviews are often multidisciplinary and explore all types of iron and steel slags, sometimes including the recycling of LFS in the steel industry. As the reuse of industrial by-products requires a knowledge of their characteristics, this paper focuses first on LFS characterization, then on the obstacles to its use, and finally compiles an exhaustive inventory of previously investigated treatments. The main parameters for treatment evaluation are the mineralogical composition of treated LFS and the unconfined compressive strength (UCS) of the final geo-composite in the short and long term. This review indicates that the treatment of LFS using rapid air/water quenching at the end-of-refining process is most appropriate, allowing a nearly amorphous slag to be obtained, which is therefore suitable for use as a SCM. Moreover, the open-air watering treatment leads to an optimal content of treated LFS. Recycling LFS in this manner can reduce OPC consumption, solve the problem of limited availability of blast furnace slag (GGBFS) by partially replacing this material, conserve natural resources, and reduce the carbon footprint of cementitious material operations. Full article

Mineral exploration works conducted in the Alto Guaporé Gold Province (AGGP), situated in the southwest region of the Amazon Craton in Brazil, faces the challenges of many gold provinces around the world, i.e., declines in the discoveries of new economic deposits and increases in exploration costs. Ground geophysical methods, combined with structural analyses and geological mapping, are valuable tools that have potential to improve accuracy in selecting exploration targets and in determining drilling locations. AGGP deposits are primarily associated with regional N20°–W50° inverse faulting and sheared geologic contacts between Meso-Neoproterozoic siliciclastic metasedimentary rocks and Mesoproterozoic basement (granite and volcano–sedimentary sequences). Mining currently occurring in the central portion of the province drives exploration works towards the many existing targets at the area. Among them, the ABP target is one of the most promising for being located few kilometers north of the Pau-a-Pique mine. At the ABP target, gold is associated with hydrothermal alteration located in the sheared contacts and in the hinge zone of folded metasedimentary sequence. Hydrothermal phases include Fe-oxides, sulfide (py), muscovite and quartz veins. In this study, we use magnetic and geoelectric (induced polarization) surveys coupled with structural and geological mapping to identify potential footprints within the ABP target. The results from induced polarization (IP) profiles successfully mapped the shape and orientation of the main structures down to approximately 350 m at the ABP target, indicating potential locations for hydrothermal alteration hosting gold. Additionally, 3D magnetic data inversions illustrated the distribution of magnetic susceptibilities and magnetization vectors associated with shear zone structures and isolated magnetic bodies. Magnetic data highlighted fault zones along the contacts between metamorphic rocks and granites, while IP data identified areas with high chargeability, correlating with sulfidation zones mineralized with gold. These findings suggest a metallogenic model where gold deposits are transported through deep structures connected to regional faults, implying significant tectonic and structural control over gold deposition. The results underscore the potential of multiparameter geophysics in identifying and characterizing deposits in both deep and strike, thereby advancing our understanding of mineral occurrences in the region and enhancing the search for new mineralized zones. Full article