Search Results (35,453)

The emergence of antibiotic-resistant bacteria has resulted in a lack of available drugs that can be used to treat various diseases. Antimicrobial peptides (AMPs) are green and safe antibiotic alternatives. In 2022, an outbreak of an acute diarrheal disease caused by Gram-negative cocci named Neisseria occurred among domestic geese (Anser cygnoides orientalis) in Northeast China. In this study, we analyzed Neisseria S1, which caused diarrhea in geese, and determined whether AMP R7I designed in our laboratory can be used to treat Neisseria infection. This is the first report and isolation of enteropathogenic Neisseria, as well as the first report of Neisseria infection in Anser cygnoides orientalis. Peptide R7I has the capability to counteract Neisseria S1 infection both in vivo and in vitro. R7I induced the release of intracellular contents, leading to the death of Neisseria. Oral treatment of R7I modulated metabolic levels, antioxidant capacity, and immune responses and inhibited inflammation in Neisseria-infected geese. Furthermore, R7I significantly contributed to the recovery of intestinal homeostasis and regulated intestinal function via a signaling pathway related to metabolism in Neisseria infection. During our study of the mechanism of R7I against Neisseria infection, we preliminary found that R7I regulates lipid metabolism disorder and inflammation caused by Neisseria infection through the PPAR signaling pathway. In conclusion, R7I shows a strong ability against Neisseria infection, and it can be used as an oral antibiotic alternative in animal feed. Full article

Periodontitis is a chronic oral inflammatory disease whose treatment is often hindered by poor drug retention, prolonged therapeutic regimens, and the rise of antibiotic resistance. In this study, we developed a Hydrogel@ZIF-8@metronidazole (Hydrogel@ZIF-8@MNZ) nanocomposite dressing for targeted, sustained, and in situ antimicrobial therapy. This system integrates ZIF-8, a pH-responsive metal–organic framework, with the antimicrobial agent metronidazole (MNZ), encapsulated within a crosslinked hydrogel matrix to enhance stability and retention in the oral environment. Drug release studies demonstrated that MNZ release was significantly accelerated under acidic conditions (pH 5.0), mimicking the periodontal microenvironment. The Hydrogel@ZIF-8 composite achieved a maximum MNZ adsorption capacity of 132.45 mg·g⁻¹, with a spontaneous and exothermic uptake process best described by a pseudo-second-order kinetic model, suggesting chemisorption as the dominant mechanism. The nanoplatform exhibited strong pH-responsive behavior, with enhanced drug release under acidic conditions and potent dose-dependent bactericidal activity against Fusobacterium nucleatum (Fn). At the highest tested concentration, bacterial survival was reduced to approximately 30%, with extensive membrane disruption observed through live/dead fluorescence microscopy. In summary, the stimuli-responsive Hydrogel@ZIF-8@MNZ nanocomposite offers an intelligent and effective therapeutic strategy for periodontitis. By tailoring its action to the disease microenvironment, this platform enables sustained and localized antibacterial therapy, addressing major challenges in the treatment of chronic oral infections. Full article

In this study, the differences in gene expression of Stropharia rugosoannulata at different treatment times under high temperature and drought stress were analyzed by transcriptomics. Here, a total of 74,571 transcripts and 16,233 unigenes were identified, with an average assembly length of 3002 bp. A total of 10,248 differentially expressed genes (DEGs) were identified. DEG analysis indicated that the numbers of DEGs under high-temperature stress for 1 d, 2 d, and 3 d were 798, 851, and 1484, respectively. These DEGs were involved in 96 GO functional categories and 69 KEGG metabolic pathways. Meanwhile, the numbers of DEGs under drought stress for 3 d, 6 d, and 9 d were 421, 1072, and 2880, respectively. These DEGs were involved in 108 GO functional categories and 78 KEGG metabolic pathways. Further analysis of the metabolic pathway (ko04011) commonly enriched by DEGs identified 15 candidate genes responding to high-temperature or drought stress. Eight candidate genes were randomly selected for qRT-PCR verification, and the qRT-PCR results were basically consistent with the transcriptome datasets. These findings provide critical candidate genes for understanding the molecular regulation mechanism of S. rugosoannulata in response to high temperature and drought stress and have important reference value for its stress resistance breeding. Full article

To address the synergistic degradation mechanisms in engineering service environments, we propose a boron microalloying strategy to enhance the multifunctional surface performance of AlCoCrFeNiMo-based high-entropy alloys. AlCoCrFeNiMoTiBx coatings (x = 0, 0.5, 1, and 1.5) were fabricated on Q235 steel substrates using laser cladding. The microstructure of the coatings was characterized using scanning electron microscope (SEM) and energy dispersive spectrometer (EDS), while their wear and corrosion resistance were evaluated through tribological and electrochemical tests. The key findings indicate that boron addition preserves the original body-centered cubic (BCC) and σ phases in the coating while promoting the in situ formation of TiB₂, leading to lattice distortion. With increasing B content, the BCC phase becomes refined, and both the fraction and size of TiB₂ particles increase. Boron incorporation improves the coating’s microhardness and wear resistance, with the highest wear resistance achieved at x = 1, where abrasive and oxidative wear predominate. At lower content (x = 0.5), B enhances the stability of the passive film and thereby improves corrosion resistance. In contrast, excessive formation of large TiB₂ particles introduces defects into the passive film, accelerating its degradation. Full article

Laser shock processing (LSP) is a surface treatment technique used to enhance mechanical properties such as hardness, corrosion resistance, and wear resistance. This study investigates the effects of LSP on a 6061-T6 aluminium alloy using four treatment conditions: nanosecond (ns-LSP), picosecond (ps-LSP), and a combination of nanosecond–picosecond (nsps-LSP) and picosecond–nanosecond (psns-LSP) pulses. Two laser systems were employed: a Q-switched Nd:YAG laser (850 mJ/pulse, 6 ns, 1064 nm, 10 Hz), and an Ekspla Atlantic 355-60 laser (0.110 mJ/pulse, 13 ps, 1064 nm, 1 kHz). All treatments induced compressive residual stresses up to 1 mm in depth. Additionally, improvements in microhardness were observed, particularly at deeper layers in the combined nsps-LSP treatment. Surface roughness was measured and compared. Among all configurations, the nsps-LSP treatment produced the highest compressive residual stresses (−428 MPa) and greater microhardness at depth. These results suggest that the combined nsps-LSP treatment represents a promising approach to enhance the mechanical performance of metallic components. Full article

To increase semiconductor production yield and meet the growing global demand, air bearings offering higher processing speeds and reduced friction losses have been proposed as an ideal solution. However, due to the non-contact support characteristic of air bearings, challenges such as shaft displacement caused by processing resistance inevitably arise. As an engineering requirement, the shaft must restrict lateral deflection to within 30 μm under transverse force. In our previous research, a compensation system using a nozzle–flapper mechanism as a displacement sensor was proposed to address shaft displacement. The effectiveness of the nozzle–flapper system in measuring shaft displacement was validated at rotational speeds up to 20,000 rpm. Furthermore, the compensation system’s ability to maintain the shaft’s initial position under a 5 N external force was verified in related collaborative research. In this study, building upon prior work, we further analyze the system characteristics of the cylindrical nozzle–flapper. This includes modeling the geometric space formed by the specific shape of the cylindrical flapper and nozzle and proposing an airflow hypothesis based on this geometry. The hypothesis is incorporated into the theoretical model of a standard nozzle–flapper system, resulting in an optimized theoretical method applicable to cylindrical configurations. Experimental results validating the effectiveness of the proposed model are also presented. Full article

Background/Objectives: Biofilms are key in spreading antibiotic resistance in various ecosystems. This study employed comparative genomics to examine the resistance and adaptability mechanisms of the Vibrio parahaemolyticus strain Vaw-5, isolated from a seafood market biofilm. Methods: A comparative examination of Vaw-5 and 32 publicly available V. parahaemolyticus genomes identified a distinct set of genetic resistance characteristics. Results: Unlike clinical strains, Vaw-5 lacks acquired antimicrobial resistance genes like the blaCARB and qnr variations. Instead, its resistance potential is based on chromosomal alterations, efflux pump systems (vmeAB, vcmD), and a unique repertoire of 16 strain-specific transposons, including Tn5501 and Tn5393, which are well-known vectors for antibiotic resistance gene (ARG) mobilization. Although not multidrug-resistant, Vaw-5 possesses unique genomic islands that share negligible homology with those of clinical strains, enriched with gene clusters for environmental adaptation, such as exopolysaccharide production and a fully functional Type VI Secretion System. Vaw-5 carries a distinctive plasmid with the resistance gene aac(2${}^{\prime }$)-Ia. Conclusions: Biofilm adaptation promotes structural integrity, inherent processes, and resistance above standard ARG acquisition. This study focuses on how biofilm communities in the food chain can operate as covert incubators for mobilizable resistance determinants, emphasizing the significance of ecological monitoring within a One Health paradigm to reduce possible public health hazards. Full article

Suture anchors are widely used for tendon and ligament repair, but their fixation strength is compromised in osteoporotic bone and limited bone volume such as the coracoid process. Existing designs are prone to penetration and insufficient cortical engagement under such conditions. In this study, we developed a novel short expandable-wing (SEW) suture anchor (Ti6Al4V) designed to enhance pull-out resistance through a deployable wing mechanism that locks directly against the cortical bone. Finite element analysis based on CT-derived bone material properties demonstrated reduced intra-bone displacement and improved load transfer with the SEW compared to conventional anchors. Mechanical testing using matched artificial bone surrogates (N = 3 per group) demonstrated significantly higher static pull-out strength in both normal (581 N) and osteoporotic bone (377 N) relative to controls (p < 0.05). Although the sample size was limited, results were consistent and statistically significant. After cyclic loading, SEW anchor fixation strength increased by 25–56%. In a 3D-printed anatomical coracoclavicular ligament reconstruction model, the SEW anchor provided nearly double the fixation strength of the hook plate, underscoring its superior stability under high-demand clinical conditions. This straightforward implantation protocol—requiring only a 5 mm drill hole without tapping, followed by direct insertion and knob-driven wing deployment—facilitates seamless integration into existing surgical workflows. Overall, the SEW anchor addresses key limitations of existing anchor designs in small bone volume and osteoporotic environments, demonstrating strong potential for clinical translation. Full article

Background/Objectives: Helicobacter pylori (H. pylori) is a Gram-negative bacterium that colonizes the human stomach and causes various gastrointestinal diseases. Although antibiotic therapy is the most effective method for its eradication, the increasing prevalence of antibiotic resistance has made treatment increasingly challenging in recent years. In this study, the antimicrobial activity, synergistic effects with antibiotics, and mechanisms of action of Bicarinalin, an antimicrobial peptide (AMP) derived from the venom of Tetramorium bicarinatum, were investigated against H. pylori. Methods: To determine the antibacterial activity of Bicarinalin, a well diffusion assay was performed, yielding an inhibition zone of 18.3 mm at a concentration of 32 µg/mL for ATCC strain. MIC₉₉ values were determined by microdilution tests as 4.8 μg/mL for the reference strain. The enhancement of the antimicrobial potential of levofloxacin and clarithromycin when administered together with Bicarinalin has been demonstrated using the well diffusion method. Results: Inhibition zones increased from 14.2 mm to 20 mm for levofloxacin and from 7.3 mm to 16 mm for clarithromycin. This study is the first to identify DNA and protein leakage caused by Bicarinalin in H. pylori. Intracellular protein and DNA leakage were measured, with protein and DNA levels released into the extracellular environment determined as 33.25% and 55.10%, respectively, following Bicarinalin treatment. Furthermore, to investigate its effect on membrane damage, scanning electron microscopy (SEM) was performed, revealing disrupted cell membrane structures, penetration between cells, and severe deterioration of morphological integrity. Conclusions: This study has demonstrated for the first time that, when administered concomitantly, Bicarinalin enhances the antimicrobial activities of levofloxacin and clarithromycin. This highlights its potential as an adjunctive treatment for H. pylori alongside existing drugs. Full article

Grazing systems’ production efficiency is a dynamic interaction between soil, pasture, livestock, and climate. The magnitude of the changes is related to the mechanical stress applied by the livestock and their feeding behaviour. In Southern Chile, dairy cattle present a high heterogeneity in breeds, size, live weight, and milk production. This study investigated whether cows of contrasting size/live weight can improve degraded pasture and positively modify soil (Andosol-Duric Hapludand) physical features. Three pasture types were used as follows: (i) cultivated fertilised Lolium perenne L. (perennial ryegrass) and Trifolium repens L. (white clover) mixture (BM); (ii) cultivated fertilised L. perenne, T. repens, Bromus valdivianus Phil. (pasture brome), Holcus lanatus L. (Yorkshire fog), and Dactylis glomerata L. (cocksfoot) mixture (MSM); and (iii) naturalised fertilised pasture Agrostis capillaris L. (browntop), B. valdivianus, and T. repens (NFP). Pastures were grazed with two groups of dairy cows of contrasting size and live weight: light cows (LC) [live weight: 464 ± 5.4 kg; height at the withers: 132 ± 0.6 cm (average ± s.e.m.)] and heavy cows (HC) [live weight: 600 ± 8.7 kg; height at the withers: 141 ± 0.9 cm (average ± s.e.m.)]. Hoof area was measured, and the pressure applied by cows on the soil was calculated. Soil differences in penetration resistance (PR) and macro-porosity (wCP > 50 μm) between pastures were explained by tillage and seeding, rather than as a result of livestock presence and movement (animal trampling). The PR variation during the year was associated with the soil water content (SWC). Grazing dairy cows of contrasting live weight caused changes in soil and pasture attributes, and they behaved differently during grazing. Light cows were linked to more intense grazing, a stable soil structure, and pastures with competitive species and greater tiller density. In MSM, pasture consumption increased, and the soil was more resilient to hoof compression. In general, grazing with heavy cows in these three different pasture systems did not negatively impact soil physical properties. These findings indicate that volcanic soils are resilient and that during renovation, the choice of pasture type has a greater initial impact on soil structure than the selection of cow size, but incorporating lighter cows can be a strategy to promote denser pasture swards in these grazing systems. Full article

To explore superior biocontrol resources for Rhododendron brown spot disease, five antagonistic fungal strains exhibiting significant inhibitory activity against the pathogen responsible for RBS were isolated from healthy Rhododendron hybridum Ker Gawl leaves. Among them, strain DJW5-2-1 demonstrated the highest inhibition rate, reaching 63.88% against the pathogenic fungus. Based on morphological characteristics and multigene phylogenetic analysis (ITS, β-tubulin, and tef1-α), DJW5-2-1 was identified as Diaporthe phoenicicola (Traverso & Spessa) Udayanga, Crous & K.D. Hyde. Dual culture assays further confirmed its broad-spectrum antifungal activity, with inhibition rates ranging from 39.15% to 72.54% against various phytopathogenic fungi. Biochemical analyses revealed that DJW5-2-1 secretes multiple extracellular enzymes and exhibits plant growth-promoting traits. In both in vitro and potted plant efficacy assays, the biocontrol efficacy of strain DJW5-2-1 against RBS was 49.67% and 50.61%, respectively, indicating that strain DJW5-2-1 exhibits a certain level of control efficacy against RBS. Through pot experiments, we found that strain DJW5-2-1 could promote the growth of rhododendron seedlings and significantly increase growth indicators. Among these indicators, the growth-promoting rates of plant height and stem diameter were 15.27% and 41.27%, respectively. Moreover, DJW5-2-1 contributed to improved host resistance by elevating the activities of key defense-related enzymes, including superoxide dismutase (SOD), peroxidase (POD), catalase (CAT), and polyphenol oxidase (PPO). Taken together, these findings suggest that strain DJW5-2-1 represents a promising microbial agent for the integrated control of RBS and the development of fungal-based biofertilizers. Further investigation is warranted to assess its performance under field conditions and elucidate its underlying mechanisms of action. Full article

Potholes are typical scattered distresses on asphalt pavements, severely impairing traffic safety and pedestrian safety due to delayed repair time and secondary distress. Aiming to extend the service life of repaired potholes, this study develops a pothole repair technique characterized by repair materials with superior performance and adhesive materials with high bonding strength. Firstly, the mechanical analysis for repaired potholes was conducted via finite element simulation, and thereafter, corresponding technical measures were derived to prevent the recurrence of distress in repaired potholes. Secondly, according to the material composition of solvent-based cold-mix asphalt (SCMA) and emulsified-based cold-mix asphalt (ECMA), pavement performance testing methods were proposed to test and evaluate their forming strength, high-temperature stability, low-temperature crack resistance, and water stability. On this basis, interlayer shear tests, pull-out tests, and field pothole repair cases with varying repair materials and adhesive materials were conducted, and the interfacial bonding strengths with the old pavement were then compared to optimize the pothole re-pair technique. The results showed that (1) increasing the repair material modulus and interfacial friction coefficient reduces the pressure strain (σ_y) and pressure stress (ε_y), thereby decreasing the risk of secondary dis-tress; (2) ECMA exhibits superior pavement performance, with strength and rutting resistance 49.7%–64.6% higher than SCMA; (3) the combination of ECMA and WER-EA achieves the highest interfacial pull-out and shear strengths, with their values 76.7%–78.2% higher than SCMA+WER-EA); and (4) after 1 year of opening to traffic, potholes repaired with ECMA+WER-EA show minimal thickness loss of 0.2 cm and no aggregate peeling at the edges, thus being recommended as the optimal solution for repairing potholes. This study clarifies the secondary distress mechanism of repaired potholes and provides an optimal repair scheme (ECMA+WER-EA) for engineering applications. Full article

As a key piece of equipment in badminton, the surface treatment technology of rackets has garnered significant attention in the fields of material science and sports engineering. This study is the first to systematically review research on racket coatings, integrating interdisciplinary knowledge on the classification of functional coatings, their performance-enhancing principles, and their relationship with competitive levels, thereby addressing a gap in theoretical research in this field. This study focuses on four major functional coating systems: superhydrophobic coatings (to improve environmental adaptability and reduce air resistance), anti-scratch coatings (to prolong the life of the equipment), vibration-damping coatings (to optimise vibration damping performance), and strength-enhancing coatings (to safeguard structural stability). In badminton, differences in player skill levels and usage scenarios lead to variations in racket materials, which, in turn, result in different preparation processes and performance effects. The use of vibration-damping materials alleviates the impact force on the wrist, effectively preventing sports injuries caused by prolonged training; leveraging the aerodynamic properties of superhydrophobic technology enhances racket swing speed, thereby improving hitting power and accuracy. From the perspective of performance optimization, coating technology improves athletic performance in three ways: nanocomposite coatings enhance the fatigue resistance of the racket frame; customized damping layers reduce muscle activation delays; and surface energy regulation technology improves grip stability. Challenges remain in the industrial application of environmentally friendly water-based coatings and the evaluation system for coating lifespan under multi-field coupling conditions. Future research should integrate intelligent algorithms to construct a tripartite optimization system of “racket-coating-user” and utilize digital sports platforms to analyze its mechanism of influence on professional athletes’ tactical choices, providing a theoretical paradigm and technical roadmap for the targeted development of next-generation smart badminton rackets. Full article

This study investigates the structure–property–performance (SPP) relationships of two thermoplastic polyurethanes (TPUs), FILAFLEX FOAMY 70A and SMARTFIL^® FLEX 98A, manufactured by fused filament fabrication (FFF). Disc specimens were produced with varying gyroid infill densities (10–100%) and Archimedean surface textures, and their tribological and surface characteristics were analyzed through Ball-on-Disc tests, profilometry, and optical microscopy. SMARTFIL^® FLEX 98A exhibited a sharp reduction in the coefficient of friction (μ) with increasing infill, from 1.174 at 10% to 0.371 at 100%, linked to improved structural stability at higher densities. In contrast, FILAFLEX FOAMY 70A maintained a stable but generally higher coefficient of friction (0.585–0.729) across densities, reflecting its foamed microstructure and bulk yielding behavior. Surface analysis revealed significantly higher roughness in SMARTFIL^® FLEX 98A, while FILAFLEX FOAMY 70A showed consistent roughness across infill levels. Both TPUs resisted inducing abrasive wear on the steel counterpart, but their stress-accommodation mechanisms diverged. These findings highlight distinct application profiles: SMARTFIL^® FLEX 98A for energy-absorbing, deformable components, and FILAFLEX FOAMY 70A for applications requiring stable surface finish and low adhesive wear. The results advance the design of functionally graded TPU materials through the controlled tuning of infill and surface features. Full article

High-entropy boride (HEB) ceramics combine ultra-high melting points, superior hardness, and compositional tunability, enabling service in extreme environments; however, difficult densification and limited fracture toughness still constrain their aerospace applications. In this study, metallic Ta was introduced into high-entropy (Ti_0.2Zr_0.2Hf_0.2Nb_0.2Ta_0.2)B₂ as both a sintering aid and a toughening phase. Bulk HEB-Ta composites were fabricated by spark plasma sintering to investigate the effect of Ta content on densification behavior, microstructure, mechanical properties, and high-temperature oxidation resistance. The results show that an appropriate amount of Ta markedly promotes densification; at 10 vol% Ta, the open porosity reaches a minimum of 0.15%. Hardness and fracture toughness exhibit an increase-then-decrease trend with Ta content, attaining maxima at 15 vol% Ta (20.79 ± 0.17 GPa and 4.31 ± 0.12 MPa·, respectively). During oxidation at 800–1400 °C, the extent of oxidation increases with temperature, yet the composite with 10 vol% Ta shows the best oxidation resistance. This improvement arises from the formation of a viscous, protective Ta₂O₅-B₂O₃ glassy layer that effectively suppresses oxygen diffusion and enhances high-temperature stability. Overall, incorporating metallic Ta is an effective route to improve the manufacturability and service durability of HEB ceramics, providing a composition guideline and a mechanistic basis for simultaneously enhancing densification, toughness, and oxidation resistance. Full article