Search Results (198)

The precise characterization of surface rupture zones and associated co-seismic displacement fields from large earthquakes provides critical insights into seismic rupture mechanisms, earthquake dynamics, and hazard assessments. Stereo-photogrammetric digital elevation models (DEMs), produced from high-resolution satellite stereo imagery, offer reliable global datasets that are suitable for the detailed extraction and quantification of vertical co-seismic displacements. In this study, we utilized pre- and post-event WorldView-2 stereo images of the 2024 Ms7.1 Wushi earthquake in Xinjiang to generate DEMs with a spatial resolution of 0.5 m and corresponding terrain point clouds with an average density of approximately 4 points/m². Subsequently, we applied the Iterative Closest Point (ICP) algorithm to perform differencing analysis on these datasets. Special care was taken to reduce influences from terrain changes such as vegetation growth and anthropogenic structures. Ultimately, by maintaining sufficient spatial detail, we obtained a three-dimensional co-seismic displacement field with a resolution of 15 m within grid cells measuring 30 m near the fault trace. The results indicate a clear vertical displacement distribution pattern along the causative sinistral–thrust fault, exhibiting alternating uplift and subsidence zones that follow a characteristic “high-in-center and low-at-ends” profile, along with localized peak displacement clusters. Vertical displacements range from approximately 0.2 to 1.4 m, with a maximum displacement of ~1.46 m located in the piedmont region north of the Qialemati River, near the transition between alluvial fan deposits and bedrock. Horizontal displacement components in the east-west and north-south directions are negligible, consistent with focal mechanism solutions and surface rupture observations from field investigations. The successful extraction of this high-resolution vertical displacement field validates the efficacy of satellite-based high-resolution stereo-imaging methods for overcoming the limitations of GNSS and InSAR techniques in characterizing near-field surface displacements associated with earthquake ruptures. Moreover, this dataset provides robust constraints for investigating fault-slip mechanisms within near-surface geological contexts. Full article

This study examined the integraftion of airborne Light Detection and Ranging (LiDAR), Simultaneous Localization and Mapping (SLAM)-based handheld LiDAR, and iPhone LiDAR to inspect forest road networks following forest operations. The goal is to overcome the challenges posed by dense canopy cover and ensure accurate and efficient data collection and mapping. Airborne data were collected using the DJI Matrice 300 RTK UAV equipped with a Zenmuse L2 LiDAR sensor, which achieved a high point density of 285 points/m² at an altitude of 80 m. Ground-level data were collected using the BLK2GO handheld laser scanner (HPLS) with SLAM methods (LiDAR SLAM, Visual SLAM, Inertial Measurement Unit) and the iPhone 13 Pro Max LiDAR. Data processing included generating DEMs, DSMs, and True Digital Orthophotos (TDOMs) via DJI Terra, LiDAR360 V8, and Cyclone REGISTER 360 PLUS, with additional processing and merging using CloudCompare V2 and ArcGIS Pro 3.4.0. The pairwise comparison analysis between ALS data and each alternative method revealed notable differences in elevation, highlighting discrepancies between methods. ALS + iPhone demonstrated the smallest deviation from ALS (MAE = 0.011, RMSE = 0.011, RE = 0.003%) and HPLS the larger deviation from ALS (MAE = 0.507, RMSE = 0.542, RE = 0.123%). The findings highlight the potential of fusing point clouds from diverse platforms to enhance forest road mapping accuracy. However, the selection of technology should consider trade-offs among accuracy, cost, and operational constraints. Mobile LiDAR solutions, particularly the iPhone, offer promising low-cost alternatives for certain applications. Future research should explore real-time fusion workflows and strategies to improve the cost-effectiveness and scalability of multisensor approaches for forest road monitoring. Full article

This paper addresses the critical challenge of point cloud down-sampling for digital twin creation, where reducing data volume while preserving geometric fidelity remains an ongoing research problem. We propose a novel down-sampling approach that combines Low-Discrepancy Sequences (LDS) with Hilbert curve ordering to create a method that preserves both global distribution characteristics and local geometric features. Unlike traditional methods that impose uniform density or rely on computationally intensive feature detection, our LDS-Hilbert approach leverages the complementary mathematical properties of Low-Discrepancy Sequences and space-filling curves to achieve balanced sampling that respects the original density distribution while ensuring comprehensive coverage. Through four comprehensive experiments covering parametric surface fitting, mesh reconstruction from basic closed geometries, complex CAD models, and real-world laser scans, we demonstrate that LDS-Hilbert consistently outperforms established methods, including Simple Random Sampling (SRS), Farthest Point Sampling (FPS), and Voxel Grid Filtering (Voxel). Results show parameter recovery improvements often exceeding 50% for parametric models compared to the FPS and Voxel methods, nearly 50% better shape preservation as measured by the Point-to-Mesh Distance (than FPS) and up to 160% as measured by the Viewpoint Feature Histogram Distance (than SRS) on complex real-world scans. The method achieves these improvements without requiring feature-specific calculations, extensive pre-processing, or task-specific training data, making it a practical advance for enhancing digital twin fidelity across diverse application domains. Full article

With the rapid advancement of smart forestry, 3D reconstruction and the extraction of structural parameters have emerged as indispensable tools in modern forest monitoring. Although traditional methods involving LiDAR and manual surveys remain effective, they often entail considerable operational complexity and fluctuating costs. To provide a cost-effective and scalable alternative, this study introduces FS-MVSNet—a multi-view image-based 3D reconstruction framework incorporating feature pyramid structures and attention mechanisms. Field experiments were performed in three representative forest parks in Beijing, characterized by open canopies and minimal understory, creating the optimal conditions for photogrammetric reconstruction. The proposed workflow encompasses near-ground image acquisition, image preprocessing, 3D reconstruction, and parameter estimation. FS-MVSNet resulted in an average increase in point cloud density of 149.8% and 22.6% over baseline methods, and facilitated robust diameter at breast height (DBH) estimation through an iterative circle-fitting strategy. Across four sample plots, the DBH estimation accuracy surpassed 91%, with mean improvements of 3.14% in AE, 1.005 cm in RMSE, and 3.64% in rRMSE. Further evaluations on the DTU dataset validated the reconstruction quality, yielding scores of 0.317 mm for accuracy, 0.392 mm for completeness, and 0.372 mm for overall performance. The proposed method demonstrates strong potential for low-cost and scalable forest surveying applications. Future research will investigate its applicability in more structurally complex and heterogeneous forest environments, and benchmark its performance against state-of-the-art LiDAR-based workflows. Full article

Accurate individual tree segmentation (ITS) in dense rubber plantations is a challenging task due to overlapping canopies, indistinct tree apexes, and intricate branch structures. To address these challenges, we propose a bottom-up, multi-feature fusion method for segmenting rubber trees using UAV-LiDAR point clouds. Our approach first involves performing a trunk extraction based on branch-point density variations and neighborhood directional features, which allows for the precise separation of trunks from overlapping canopies. Next, we introduce a multi-feature fusion strategy that replaces single-threshold constraints, integrating geometric, directional, and density attributes to classify core canopy points, boundary points, and overlapping regions. Disputed points are then iteratively assigned to adjacent trees based on neighborhood growth angle consistency, enhancing the robustness of the segmentation. Experiments conducted in rubber plantations with varying canopy closure (low, medium, and high) show accuracies of 0.97, 0.98, and 0.95. Additionally, the crown width and canopy projection area derived from the segmented individual tree point clouds are highly consistent with ground truth data, with R² values exceeding 0.98 and 0.97, respectively. The proposed method provides a reliable foundation for 3D tree modeling and biomass estimation in structurally complex plantations, advancing precision forestry and ecosystem assessment by overcoming the critical limitations of existing ITS approaches in high-closure tropical agroforests. Full article

Under the synergy of urban heritage conservation and regional cultural continuity, this study explores the spatial features of “mausoleum–city symbiosis” landscapes in Huangling County’s gully regions. Focusing on Fangzhou Ancient City, we address historical spatial degradation caused by excessive industrialization and disordered urban expansion. A methodological framework is proposed, combining low-altitude UAV-derived high-density point cloud data with RandLA-Net for semi-automatic semantic segmentation of buildings, vegetation, and roads by integrating multispectral and geometric attributes. Key findings reveal: (1) Modern buildings’ abnormal elevation in steep slopes disrupts the plateau–city visual corridor; (2) Statistical analysis shows significant morphological disparities between historical and modern streets; (3) Modern structures exceed traditional height limits, while divergent roof slopes aggravate aesthetic fragmentation. This multi-level spatial analysis offers a paradigm for quantifying historical urban spaces and validates deep learning’s feasibility in heritage spatial analytics, providing insights for balancing conservation and development in ecologically fragile areas. Full article

Accurate and efficient detection of road damage is crucial in traffic safety and maintenance management. Traditional road detection methods have problems such as low efficiency and insufficient accuracy, making it difficult to meet the needs of large-scale road health assessments. With the development of drone technology and computer vision, new ideas have been provided for the automatic detection of road diseases. The existing drone-based road detection methods have poor performance in dealing with complex road scenes such as vehicle occlusion, and there is still room for improvement in 3D modeling accuracy and disease detection accuracy, lacking a comprehensive and efficient solution. This paper proposes a UAV (Unmanned Aerial Vehicle)-based 3D reconstruction and large-scale disease detection method for roads. By capturing aerial images with UAVs and utilizing an improved YOLOv8 model, vehicles in the images are identified and removed. Apply MVSNet (Multi-View Stereo Network) 3D reconstruction algorithm for road surface modeling, and finally use point cloud processing and DBSCAN (Density-Based Spatial Clustering of Applications with Noise) clustering for disease detection. The experimental results show that this method performs excellently in terms of 3D modeling accuracy and speed. Compared with the traditional colmap method, the reconstruction speed is greatly improved, and the reconstruction density is three times that of colmap. Meanwhile, the reconstructed point cloud can effectively detect road smoothness and settlement. This study provides a new method for effective disease detection under complex road conditions, suitable for large-scale road health assessment tasks. Full article

In the past two decades, there has been a tremendous increase in demand for services requiring a high bandwidth, a low latency, and high data rates, such as broadband internet services, video streaming, cloud computing, IoT devices, and mobile data services (5G and beyond). Optical wireless communication (OWC) technology, which is also envisioned for next-generation satellite networks using laser links, offers a promising solution to meet these demands. Establishing a line-of-sight (LOS) link and initiating communication in laser links is a challenging task. This process is managed by the acquisition, pointing, and tracking (APT) system, which must deal with the narrow beam divergence and the presence of satellite platform vibrations. These factors increase acquisition time and decrease acquisition probability. This study presents a framework for evaluating the acquisition time of four different scanning methods: spiral, raster, square spiral, and hexagonal, using a probabilistic approach. A satellite platform vibration model is used, and an algorithm for estimating its power spectral density is applied. Maximum likelihood estimation is employed to estimate key parameters from satellite vibrations to optimize scan parameters, such as the overlap factor and beam divergence. The simulation results show that selecting the scan path, overlap factor, and beam divergence based on an accurate estimation of satellite vibrations can prevent multiple scans of the uncertainty region, improve target satellite detection, and increase acquisition probability, given that the satellite vibration amplitudes are within the constraints imposed by the scan parameters. This study contributes to improving the acquisition process, which can, in turn, enhance the pointing and tracking phases of the APT system in laser links. Full article

Wheat canopy height is an important parameter for monitoring growth status. Accurately predicting the wheat canopy height can improve field management efficiency and optimize fertilization and irrigation. Changes in the growth characteristics of wheat at different growth stages affect the canopy structure, leading to changes in the quality of the LiDAR point cloud (e.g., lower density, more noise points). Multispectral data can capture these changes in the crop canopy and provide more information about the growth status of wheat. Therefore, a method is proposed that fuses LiDAR point cloud features and multispectral feature parameters to estimate the canopy height of winter wheat. Low-altitude unmanned aerial systems (UASs) equipped with LiDAR and multispectral cameras were used to collect point cloud and multispectral data from experimental winter wheat fields during three key growth stages: green-up (GUS), jointing (JS), and booting (BS). Analysis of variance, variance inflation factor, and Pearson correlation analysis were employed to extract point cloud features and multispectral feature parameters significantly correlated with the canopy height. Four wheat canopy height estimation models were constructed based on the Optuna-optimized RF (OP-RF), Elastic Net regression, Extreme Gradient Boosting, and Support Vector Regression models. The model training results showed that the OP-RF model provided the best performance across all three growth stages of wheat. The coefficient of determination values were 0.921, 0.936, and 0.842 at the GUS, JS, and BS, respectively. The root mean square error values were 0.009 m, 0.016 m, and 0.015 m. The mean absolute error values were 0.006 m, 0.011 m, and 0.011 m, respectively. At the same time, it was obtained that the estimation results of fusing point cloud features and multispectral feature parameters were better than the estimation results of a single type of feature parameters. The results meet the requirements for canopy height prediction. These results demonstrate that the fusion of point cloud features and multispectral parameters can improve the accuracy of crop canopy height monitoring. The method provides a valuable method for the remote sensing monitoring of phenotypic information of low and densely planted crops and also provides important data support for crop growth assessment and field management. Full article

The accurate and efficient 3D reconstruction of trees is beneficial for urban forest resource assessment and management. Close-range photogrammetry (CRP) is widely used in the 3D model reconstruction of forest scenes. However, in practical forestry applications, challenges such as low reconstruction efficiency and poor reconstruction quality persist. Recently, novel view synthesis (NVS) technology, such as neural radiance fields (NeRF) and 3D Gaussian splatting (3DGS), has shown great potential in the 3D reconstruction of plants using some limited number of images. However, existing research typically focuses on small plants in orchards or individual trees. It remains uncertain whether this technology can be effectively applied in larger, more complex stands or forest scenes. In this study, we collected sequential images of urban forest plots with varying levels of complexity using imaging devices with different resolutions (cameras on smartphones and UAV). These plots included one with sparse, leafless trees and another with dense foliage and more occlusions. We then performed dense reconstruction of forest stands using NeRF and 3DGS methods. The resulting point cloud models were compared with those obtained through photogrammetric reconstruction and laser scanning methods. The results show that compared to photogrammetric method, NVS methods have a significant advantage in reconstruction efficiency. The photogrammetric method is suitable for relatively simple forest stands, as it is less adaptable to complex ones. This results in tree point cloud models with issues such as excessive canopy noise and wrongfully reconstructed trees with duplicated trunks and canopies. In contrast, NeRF is better adapted to more complex forest stands, yielding tree point clouds of the highest quality that offer more detailed trunk and canopy information. However, it can lead to reconstruction errors in the ground area when the input views are limited. The 3DGS method has a relatively poor capability to generate dense point clouds, resulting in models with low point density, particularly with sparse points in the trunk areas, which affects the accuracy of the diameter at breast height (DBH) estimation. Tree height and crown diameter information can be extracted from the point clouds reconstructed by all three methods, with NeRF achieving the highest accuracy in tree height. However, the accuracy of DBH extracted from photogrammetric point clouds is still higher than that from NeRF point clouds. Meanwhile, compared to ground-level smartphone images, tree parameters extracted from reconstruction results of higher-resolution and varied perspectives of drone images are more accurate. These findings confirm that NVS methods have significant application potential for 3D reconstruction of urban forests. Full article

Object detection is a critical task in autonomous driving. Currently, 3D object detection methods for autonomous driving primarily rely on stereo cameras and LiDAR, which are susceptible to adverse weather conditions and low lighting, resulting in limited robustness. In contrast, automotive mmWave radar offers advantages such as resilience to complex weather, independence from lighting conditions, and a low cost, making it a widely studied sensor type. Modern 4D millimeter-wave (mmWave) radar can provide spatial dimensions (x, y, z) as well as Doppler information, meeting the requirements for 3D object detection. However, the point cloud density of 4D mmWave radar is significantly lower than that of LiDAR in the case of short distances, and existing point cloud object detection methods struggle to adapt to such sparse data. To address this challenge, we propose a novel 4D mmWave radar point cloud object detection framework. First, we employ moving least squares (MLS) to densify multi-frame fused point clouds, effectively increasing the point cloud density. Next, we construct a 3D object detection network based on point pillar encoding and utilize an SSD detection head for detection on feature maps. Finally, we validate our method on the VoD dataset. Experimental results demonstrate that our proposed framework outperforms comparative methods, and the MLS-based point cloud densification method significantly enhances the object detection performance. Full article

Medium–low density UAV point clouds often suffer from incomplete lower canopy structures and sparse distributions due to self-occlusion. While existing point cloud completion models achieve high metric accuracy, they inadequately address missing regions in trunks and lower canopy areas. To resolve these issues, this paper proposes a hierarchical random sampling strategy and a spatially constrained loss function. First, we dynamically stratify point clouds based on density distribution characteristics, employing hierarchical random sampling to preserve proportional representation of lower-level points, thereby effectively retaining basal tree structure information. Second, we introduce a distance constraint term for mid-lower point clouds into the symmetrical Chamfer distance (CD) loss, compelling models to prioritize completion quality in trunk base regions. Experiments on the FOR-instance-created completion dataset and Xiong’an dataset demonstrate that our method significantly enhances structural recovery capability at tree trunk bases, with visual results outperforming the baseline SeedFormer model. Additionally, we refer to existing point cloud-based diameter at breast height (DBH) calculation methods to measure the completed trees and compare the computed results with the measured values to evaluate the accuracy of the completion effect. Experimental results show that, after integrating our proposed strategies with existing completion methods, the accuracy of DBH measurement from point clouds is significantly improved. This study provides novel insights for addressing structural bias in tree point cloud completion and offers valuable references for digital forestry resource management. Full article

Currently, it is very important to accurately estimate growing stock volumes; it is crucial for quantitatively assessing forest growth and formulating forest management plans. It is convenient and quick to use the Structure from Motion (SfM) algorithm in computer vision to obtain 3D point cloud data from captured highly overlapped stereo photogrammetry images, while the optimal algorithm for estimating growing stock volume varies across different data sources and forest types. In this study, the performance of UAV stereo photogrammetry (USP) in estimating the growing stock volume (GSV) using three machine learning algorithms for a coniferous plantation in Northern China was explored, as well as the impact of point density on GSV estimation. The three machine learning algorithms used were random forest (RF), K-nearest neighbor (KNN), and support vector machine (SVM). The results showed that USP could accurately estimate the GSV with R² = 0.76–0.81, RMSE = 30.11–35.46, and rRMSE = 14.34%–16.78%. Among the three machine learning algorithms, the SVM showed the best results, followed by RF. In addition, the influence of point density on the estimation accuracy for the USP dataset was minimal in terms of R², RMSE, and rRMSE. Meanwhile, the estimation accuracies of the SVM became stable with a point density of 0.8 pts/m² for the USP data. This study evidences that the low-density point cloud data derived from USP may be a good alternative for UAV Laser Scanning (ULS) to estimate the growing stock volume of coniferous plantations in Northern China. Full article

Woody debris (WD) is an important element in forest ecosystems. It provides critical habitats for plants, animals, and insects. It is also a source of fuel contributing to fire propagation and sometimes leads to catastrophic wildfires. WD inventory is usually conducted through field surveys using transects and sample plots. Light Detection and Ranging (LiDAR) point clouds are emerging as a valuable source for the development of comprehensive WD detection strategies. Results from previous LiDAR-based WD detection approaches are promising. However, there is no general strategy for handling point clouds acquired by different platforms with varying characteristics such as the pulse repetition rate and sensor-to-object distance in natural forests. This research proposes a general and adaptive morphological WD detection strategy that requires only a few intuitive thresholds, making it suitable for multi-platform LiDAR datasets in both plantation and natural forests. The conceptual basis of the strategy is that WD LiDAR points exhibit non-planar characteristics and a distinct intensity and comprise clusters that exceed a minimum size. The developed strategy was tested using leaf-off point clouds acquired by Geiger-mode airborne, uncrewed aerial vehicle (UAV), and backpack LiDAR systems. The results show that using the intensity data did not provide a noticeable improvement in the WD detection results. Quantitatively, the approach achieved an average recall of 0.83, indicating a low rate of omission errors. Datasets with a higher point density (i.e., from UAV and backpack LiDAR) showed better performance. As for the precision evaluation metric, it ranged from 0.40 to 0.85. The precision depends on commission errors introduced by bushes and undergrowth. Full article

With the rapid advancement of drone technology, modern drones have achieved high levels of functional integration, alongside structural improvements that include lightweight, compact designs with foldable features, greatly enhancing their flexibility and applicability in photogrammetric applications. Nevertheless, limited research currently explores data collected by such compact UAVs, and whether they can balance a small form factor with high data quality remains uncertain. To address this challenge, this study acquired the remote sensing data of a peri-urban area using the DJI Mavic 3 Enterprise and applied Object-Based Image Analysis (OBIA) to extract high-density buildings. It was found that this drone offers high portability, a low operational threshold, and minimal regulatory constraints in practical applications, while its captured imagery provides rich textural details that clearly depict the complex surface features in urban villages. To assess the accuracy of the extraction results, the visual comparison between the segmentation outputs and airborne LiDAR point clouds captured by the DJI M300 RTK was performed, and classification performance was evaluated based on confusion matrix metrics. The results indicate that the boundaries of the segmented objects align well with the building edges in the LiDAR point cloud. The classification accuracy of the three selected algorithms exceeded 80%, with the KNN classifier achieving an accuracy of 91% and a Kappa coefficient of 0.87, which robustly demonstrate the reliability of the UAV data and validate the feasibility of the proposed approach in complex cases. As a practical case reference, this study is expected to promote the wider application of lightweight UAVs across various fields. Full article