Search Results (873)

Knowledge Graph Reasoning (KGR) aims to deduce missing or novel knowledge by learning structured information and semantic relationships within Knowledge Graphs (KGs). Despite significant advances achieved by deep neural networks in recent years, existing models typically extract non-linear representations from explicit features in a relatively simplistic manner and fail to fully exploit semantic heterogeneity of relation types and entity co-occurrence frequencies. Consequently, these models struggle to capture critical predictive cues embedded in various entities and relations. To address these limitations, this paper proposes a relation aware spectral decoupling attention network for KGR (RASD). First, a spectral decoupling attention network module projects joint embeddings of entities and relations into the frequency domain, extracting features across different frequency bands and adaptively allocating attention at the global level to model frequency specific information. Next, a relation-aware learning module employs relation aware filters and an augmentation mechanism to preserve distinct relational properties and suppress redundant features, thereby enhancing representation of heterogeneous relations. Experimental results demonstrate that RASD achieves significant and consistent improvements over multiple leading baseline models on link prediction tasks across five public benchmark datasets. Full article

Accurate and robust calibration of multifocal plenoptic cameras is essential for high-precision 3D light field reconstruction. In this work, we propose a blur feature-guided cascaded calibration for the plenoptic camera. First, white images at different aperture values are used to estimate the high-confidence center point and radius of micro-images, and the defocus theory is used to estimate the initial values of the intrinsic parameters. Second, the gradient value is introduced to quantify the degree of blurring of the corner points, which are then divided into three types: clear, semi-clear, and blurred. Furthermore, a joint geometric constraint model of epipolar lines and virtual depth is constructed, and the coordinates of the semi-clear and blurred corner points are optimized in a step-by-step manner by using the clear corner point coordinates. The micro-image center ray projection equation is then devised to assist in the optimization of the microlens array core parameters and establish blur-adaptive credibility weights, thereby constructing a global nonlinear optimization. Finally, the proposed method is tested on both simulated and captured datasets, and the results exhibit superior performance when compared with the established methods described by Labussière, Nousias, and Liu. The proposed method excels in corner feature extraction, calibration accuracy of both internal and external parameters, and calibration sensitivity when applied to multifocal-length light field cameras, highlighting its advantages and robustness. Full article

In freeform surface grid structures, quadrilateral meshes offer high visual transparency and simple joint connections, but their structural stability is relatively limited. To enhance stability, designers often introduce additional structural elements along the diagonals of the quadrilateral mesh, forming double-layer quadrilateral grid systems such as cable-braced gridshells. However, current design methodologies do not support the simultaneous optimization of both layers. As a result, the two layers are often designed independently in practical applications, leading to complex joint detailing that compromises construction efficiency, architectural aesthetics, and overall structural performance. To address these challenges, this study presents a weighted multi-objective geometry optimization framework based on a Guided-Projection algorithm. The proposed method integrates half-edge data structure and multiple geometric and structural constraints, enabling the simultaneous optimization of quadrilateral mesh planarity (i.e., panels lying on flat planes) and the orthogonality (i.e., angles approaching 90°) of diagonal cable layouts. Through multiple case studies, the method demonstrates significant improvements in panel planarity and cable orthogonality. The results also highlight the algorithm’s rapid convergence and high computational efficiency. Finite element analysis further validates the structural benefits of the optimized configurations, including reduced peak axial forces in cables, more uniform cable force distribution, and enhanced overall stiffness and buckling resistance. In conclusion, the method improves structural stability, constructability, and design efficiency, offering a practical tool for optimizing freeform cable-braced gridshells. Full article

Biofilms are structured communities of microorganisms encased in a self-produced extracellular matrix, and they represent one of the most widespread forms of microbial life on Earth. Their presence poses serious challenges in both environmental and clinical settings. In natural and industrial systems, biofilms contribute to water contamination, pipeline corrosion, and biofouling. Clinically, biofilm-associated infections are responsible for approximately 80% of all microbial infections, including endocarditis, osteomyelitis, cystic fibrosis, and chronic sinusitis. A particularly critical concern is their colonization of medical devices, where biofilms can lead to chronic infections, implant failure, and increased mortality. Implantable devices, such as orthopedic implants, cardiac pacemakers, cochlear implants, urinary catheters, and hernia meshes, are highly susceptible to microbial attachment and biofilm development. These infections are often recalcitrant to conventional antibiotics and frequently necessitate surgical revision. In the United States, over 500,000 biofilm-related implant infections occur annually, with prosthetic joint infections alone projected to incur revision surgery costs exceeding USD 500 million per year—a figure expected to rise to USD 1.62 billion by 2030. To address these challenges, surface modification of medical devices has emerged as a promising strategy to prevent bacterial adhesion and biofilm formation. This review focuses on recent advances in chemical surface functionalization using non-antibiotic agents, such as enzymes, chelating agents, quorum sensing quenching factors, biosurfactants, oxidizing compounds and nanoparticles, designed to enhance antifouling and mature biofilm eradication properties. These approaches aim not only to prevent device-associated infections but also to reduce dependence on antibiotics and mitigate the development of antimicrobial resistance. Full article

Based on a comprehensive review of the current research status of ecological compensation both domestically and internationally, combined with field survey data, this study delves into the issue of multi-stakeholder participation in the ecological compensation mechanisms of the Xin’an River Basin. This research reveals that the joint participation of multiple stakeholders is crucial to achieving the goals of ecological compensation in river basins. The government plays a significant role in macro-guidance, financial support, policy guarantees, supervision, and management. It promotes the comprehensive implementation of ecological environmental protection by formulating relevant laws and regulations, guiding the public to participate in ecological conservation, and supervising and punishing pollution behaviors. The public, serving as the main force, forms strong awareness and behavioral habits of ecological protection through active participation in environmental protection, monitoring, and feedback. As participants, enterprises contribute to industrial transformation and green development by improving resource utilization efficiency, reducing pollution emissions, promoting green industries, and participating in ecological restoration projects. Scientific research institutions, as technology enablers, have effectively enhanced governance efficiency through technological research and innovation, ecosystem value accounting to provide decision-making support, and public education. Social organizations, as facilitators, have injected vitality and innovation into watershed governance by extensively mobilizing social forces and building multi-party collaboration platforms. Communities, as supporters, have transformed ecological value into economic benefits by developing characteristic industries such as eco-agriculture and eco-tourism. Based on the above findings, further recommendations are proposed to mobilize the enthusiasm of upstream communities and encourage their participation in ecological compensation, promote the market-oriented operation of ecological compensation mechanisms, strengthen cross-regional cooperation to establish joint mechanisms, enhance supervision and evaluation, and establish a sound benefit-sharing mechanism. These recommendations provide theoretical support and practical references for ecological compensation worldwide. Full article

This study quantitatively assesses the risk of water shortage (WSR) in the Baiyangdian area due to the Inter-Basin Water Transfer (IBWT) project, focusing on the impact of water transfer on regional water security. The actual evapotranspiration (ETa) is calculated, and the correlation simulation using Archimedes’ Copula function is implemented in Python 3.7.1, with optimization using the sum of squares of deviations (OLS) and the AIC criterion. The joint distribution model between ETa and three water supply scenarios is constructed. Key findings include (1) ETa increased by 27.3% after water transfer, far exceeding the slight increase in water supply before the transfer; (2) various Archimedean Copulas effectively capture the dependence and joint probability distribution between water supply and ETa; (3) water shortage risk increased after water transfer, with rainfall and upstream water unable to alleviate the problem in Baiyangdian; and (4) cross-basin water transfer reduced risk, with a reduction of 8.90% in the total probability of three key water resource scheduling combinations. This study establishes a Copula-based framework for water shortage risk assessment, providing a scientific basis for water allocation strategies in ecologically sensitive areas affected by human activities. Full article

This study presents the design, fabrication, and clinical validation of a lightweight, body-powered prosthetic index finger actuated via metacarpophalangeal (MCP) joint motion. The proposed system incorporates an underactuated, cable-driven mechanism combining rigid and compliant elements to achieve passive adaptability and embodied intelligence, supporting intuitive user interaction. Results indicate that the prosthesis successfully mimics natural finger flexion and adapts effectively to a variety of grasping tasks with minimal effort. This study was conducted in accordance with ethical standards and approved by the Institutional Review Board (IRB), Project No. 670161, titled “Biologically-Inspired Synthetic Finger: Design, Fabrication, and Application.” The findings suggest that the device offers a viable and practical solution for individuals with partial hand loss, particularly in settings where electrically powered systems are unsuitable or inaccessible. Full article

The increasing integration of wind and photovoltaic energy into power systems brings about large fluctuations and significant challenges for power absorption. Wind–solar–hydro–storage multi-energy complementary systems, especially joint dispatching strategies, have attracted wide attention due to their ability to coordinate the advantages of different resources and enhance both flexibility and economic efficiency. This paper develops a capacity optimization model for a wind–solar–hydro–storage multi-energy complementary system. The objectives are to improve net system income, reduce wind and solar curtailment, and mitigate intraday fluctuations. We adopt the quantum particle swarm algorithm (QPSO) for outer-layer global optimization, combined with an inner-layer stepwise simulation to maximize life cycle benefits under multi-dimensional constraints. The simulation is based on the output and load data of typical wind, solar, water, and storage in Yunnan Province, and verifies the effectiveness of the proposed model. The results show that after the wind–solar–hydro–storage multi-energy complementary system is optimized, the utilization rate of new energy and the system economy are significantly improved, which has a wide range of engineering promotion value. The research results of this paper have important reference significance for the construction of new power systems and the engineering design of multi-energy complementary projects. Full article

The Norwegian construction sector has long struggled with conflict, particularly in large-scale and complex projects, where adversarial practices, rigid procurement systems, and insufficient early collaboration are common. This study explores how partnering contracts, which are collaborative delivery models designed to align stakeholder interests, affect conflict dynamics in real-world settings. Employing a mixed-methods approach, it combines semi-structured interviews with 21 experienced Norwegian construction professionals and a structured survey of 33 industry experts. The findings reveal that partnering can foster trust, improve communication, and reduce adversarial behavior through mechanisms such as early contractor involvement, joint goal setting, and open dialogue. However, participants also identified critical risks: superficial collaboration rituals, ambiguous roles, and unresolved structural inequalities that can exacerbate tensions. Importantly, the study emphasizes that partnering success depends less on the contract itself and more on cultural alignment, stakeholder competence, and long-term relational commitment. These insights contribute to a more nuanced understanding of how collaborative contracting influences conflict mitigation in the Norwegian construction sector. Full article

In this work, we introduce IK-AUG, a unified algorithmic framework for kinematics-driven data augmentation tailored to sign language recognition (SLR). Departing from traditional augmentation techniques that operate at the pixel or feature level, our method integrates inverse kinematics (IK) and virtual simulation to synthesize anatomically valid gesture sequences within a structured 3D environment. The proposed system begins with sparse 3D keypoints extracted via a pose estimator and projects them into a virtual coordinate space. A differentiable IK solver based on forward-and-backward constrained optimization is then employed to reconstruct biomechanically plausible joint trajectories. To emulate natural signer variability and enhance data richness, we define a set of parametric perturbation operators spanning spatial displacement, depth modulation, and solver sensitivity control. These operators are embedded into a generative loop that transforms each original gesture sample into a diverse sequence cluster, forming a high-fidelity augmentation corpus. We benchmark our method across five deep sequence models (CNN3D, TCN, Transformer, Informer, and Sparse Transformer) and observe consistent improvements in accuracy and convergence. Notably, Informer achieves 94.1% validation accuracy with IK-AUG enhanced training, underscoring the framework’s efficacy. These results suggest that algorithmic augmentation via kinematic modeling offers a scalable, annotation free pathway for improving SLR systems and lays the foundation for future integration with multi-sensor inputs in hybrid recognition pipelines. Full article

The European Health Technology Assessment (HTA) regulation (HTAR) came into effect in January 2025 and impacts the HTA process in all European Member States. Member States must give due consideration to the joint clinical assessment (JCA) report. This may require adaptations at the national level. This paper describes the anticipated changes to the Dutch national HTA process and how the Dutch National Health Care Institute (Zorginstituut Nederland, ZIN) prepared for this, because sharing experience between Member States can be of general interest for future expansion of the EU HTAR. ZIN’s implementation activities were facilitated by a project-governance structure and by a continuous gap analysis of the current national assessment and appraisal process of medicinal products, resulting in a concrete action plan. The implementation of the HTAR has two major implications for ZIN’s HTA process, namely that the scoping phase starts much earlier and that the JCA report is the starting point for the national assessment. Gaps, challenges and issues were identified in the categories: information and knowledge, IT and template, communication and stakeholder engagement, capacity and resources, and financial aspects. Based on a thorough and well-defined implementation plan, ZIN is ready to implement the HTAR in national HTA processes and to take on (co-)assessor roles for JCA of medicinal products in 2025. Full article

Whole-leg radiographs (WLRs) are widely used to assess coronal alignment before total knee arthroplasty (TKA), but may be inaccurate in patients with atypical morphotypes or malrotation. This study evaluated the discrepancy between WLR and 3D computed tomography (CT) scans across coronal plane alignment of the knee (CPAK) morphotypes and introduced a novel projection index—the femoral notch projection ratio (FNPR). In CPAK III knees, 19% of cases exceeded a clinically relevant threshold (>3° difference), prompting investigation of underlying projection factors. In 187 knees, coronal angles—including the medial distal femoral angle (MDFA°), medial proximal tibial angle (MPTA°), femoral mechanical angle (FMA°), and arithmetic hip–knee–ankle angle (aHKA°)—were measured using WLR and CT. Rotational positioning on WLR was assessed using FNPR and the patellar projection ratio (PPR). CPAK classification was applied. WLR systematically underestimated alignment, with the greatest bias in CPAK III (MDFA° + 1.5° ± 2.0°, p < 0.001). FNPR was significantly higher in CPAK III and VI (+1.9° vs. −0.3°, p < 0.001), indicating a tendency toward internally rotated limb positioning during imaging. The PPR–FNPR mismatch peaked in CPAK III (4.1°, p < 0.001), suggesting patellar-based centering may mask rotational malprojection. Projection artifacts from anterior osteophytes contributed to outlier measurements but were correctable. Valgus morphotypes with oblique joint lines (CPAK III) were especially prone to projection error. FNPR more accurately reflected rotational malposition than PPR in morphotypes prone to patellar subluxation. A 3D method (e.g., CT) or repeated imaging may be considered in CPAK III to improve surgical planning. Full article

This study examines the added value of territorial cooperation within the LEADER approach, a key pillar of the EU’s rural development policy. Both interterritorial and transnational cooperation projects empower Local Action Groups (LAGs) to tackle common challenges through innovative and community-driven strategies. Drawing on over 3000 projects since 1994, LEADER cooperation has proven its ability to deliver tangible results—such as joint publications, pilot projects, and shared digital platforms—alongside intangible benefits like knowledge exchange, improved governance, and stronger social capital. By facilitating experiential learning and inter-organizational collaboration, cooperation enables stakeholders to work across territorial boundaries and build networks that respond to both national and transnational development issues. The interaction among diverse actors often fosters innovative responses to local and regional problems. Using a mixed-methods approach, including case studies of Italian LAGs, this research analyses the dynamics, challenges, and impacts of cooperation, with a focus on learning processes, capacity building, and long-term sustainability. Therefore, this study focuses not only on project outcomes but also on the processes and learning dynamics that generate added value through cooperation. The findings highlight how territorial cooperation promotes inclusivity, fosters cross-border dialogue, and supports the development of context-specific solutions, ultimately enhancing rural resilience and innovation. In conclusion, LEADER cooperation contributes to a more effective, participatory, and sustainable model of rural development, offering valuable insights for the broader EU cohesion policy. Full article

With the accelerated development of urban underground spaces, prefabricated tunnel linings have become a research focus due to their advantages in construction efficiency and cost effectiveness. However, issues such as stress concentration at joints and insufficient overall stability hinder their broader application. This study investigates a cut-and-cover prefabricated tunnel project in the Chongqing High-Tech Zone through scale model tests and numerical simulations to systematically compare the mechanical behaviors of cast-in situ linings and three-segment prefabricated linings under surrounding rock loads. The experimental results show that the ultimate bearing capacity of the prefabricated lining is 15.3% lower than that of the cast-in situ lining, with asymmetric failure modes and cracks concentrated near joint regions. Numerical simulations further reveal the influence of joint stiffness on structural performance: when the joint stiffness is 30 MN·m/rad, the bending moment of the segmented lining decreases by 37.7% compared to the cast-in situ lining, while displacement increments remain controllable. By optimising joint pre-tightening forces and stiffness parameters, prefabricated linings can achieve stability comparable to cast-in situ structures while retaining construction efficiency. This research provides theoretical and technical references for the design and construction of open-cut prefabricated tunnel linings. Full article

This proceedings summarize the presentations of the 14th Alcohol Hangover Research Group (AHRG) meeting, 11–13 April 2024 in Glasgow, UK. At this annual meeting, researchers and industry representatives discussed the current state of knowledge on the causes, consequences, and treatment of alcohol hangovers, networked, and established collaborations to conduct joint future research projects. At the 14th AHRG meeting, factors impacting the presence and severity of hangovers were discussed, such as having underlying diseases, daily diet, baseline mood and personality, new information on the pathology of the alcohol hangover, a mobile phone app to monitor alcohol consumption and hangovers, and various novel treatments. Full article