Search Results (589)

Ecosystem restoration represents a promising solution for enhancing ecosystem services and environmental sustainability. However, border regions—characterized by ecological fragility and geopolitical complexity—remain underrepresented in ecosystem service and restoration research. To fill this gap, we coupled spatially explicit models (e.g., InVEST and RUSLE) with scenario analysis to quantify the ecosystem service potential that could be achieved in China’s Tibetan borderlands under two interacting agendas: ecological restoration and border-strengthening policies. Restoration feasibility was evaluated through combining local biophysical constraints, economic viability (via restoration-induced carbon gains vs. opportunity costs), operational practicality, and simulated infrastructure expansion. The results showed that per-unit-area ecosystem services in border counties (particularly Medog, Cona, and Zayu) exceed that of interior Tibet by a factor of two to four. Combining these various constraints, approximately 4–17% of the border zone remains cost-effective for grassland or forest restoration. Under low carbon pricing (US$10 t⁻¹ CO₂), the carbon revenue generated through restoration is insufficient to offset the opportunity cost of agricultural production, constituting a major constraint. Habitat quality, soil conservation, and carbon sequestration increase modestly when induced by restoration, but a pronounced carbon–water trade-off emerges. Planned infrastructure reduces restoration benefits only slightly, whereas raising the carbon price to about US$50 t⁻¹ CO₂ substantially expands such benefits. These findings highlight both the opportunities and limits of ecosystem restoration in border regions and point to carbon pricing as the key policy lever for unlocking cost-effective restoration. Full article

According to the United Nations Environment Programme reports, buildings are responsible for nearly 40% of energy-related emissions; therefore, energy-optimized building design is crucial to reduce the reliance on non-renewable energy sources as well as greenhouse gas emissions. The OECD reports indicate the use of Building Information Modelling (BIM) as one of the effective strategies for decarbonization of buildings, since a 3D digital representation of both physical and functional characteristics of a building can help to design a more efficient infrastructure. An efficient integration of solar energy in building design can be vital for the enhancement of energy performance in terms of heating, cooling, and lighting demand. This paper presents results of an analysis of how factors related to the use of daylight, such as automatic control of artificial lighting, external shading, or the visual absorptance of internal surfaces, influence the energy efficiency within an example room in two different climatic zones. The simulation was conducted using Design Builder software, with predefined occupancy schedules and internal heat gains, and standard EPW weather files for Warsaw and Genua climate zones. The study indicates that for the examined room, when no automatic sunshades or a lighting control system is utilized, most of the final energy demand is for cooling purposes (45–54%), followed by lighting (42–43%), with only 3–12% for heating purposes. The introduction of sunshades and/or the use of daylight allowed for a reduction of the total demand by up to half. Moreover, it was pointed out that often neglected factors, like the colour of the internal surfaces, can have a significant effect on the final energy consumption. In variants with light interior, the total energy consumption was lower by about 3–4% of the baseline demand, compared to their corresponding ones with dark surfaces. These results are consistent with previous studies on daylighting strategies and highlight the importance of considering both visual and thermal impacts when evaluating energy performance. Similarly, possible side effects of certain actions were highlighted, such as an increase in heat demand resulting from a reduced need for artificial lighting. The results of the analysis highlight the potential of a simulation-based design approach in optimizing daylight use, contributing to the broader goals of building decarbonization. Full article

Rangelands form the ecological and economic backbone of Namibia, yet the woody plant dynamics that sustain these landscapes remain sporadically quantified across the semi-arid interior. We investigated the characteristics (stand structure, regeneration, richness, diversity, composition, ecological importance, and indicator species) of woody communities along a pronounced south-to-north rainfall gradient (85–346 mm yr⁻¹) at five representative sites: Warmbad, Gibeon, Otjimbingwe, Ovitoto, and Sesfontein. Field sampling combined point-centered quarter surveys (10 points site⁻¹) and belt transects (15 plots site⁻¹). The basal area increased almost ten-fold along the gradient (0.4–3.4 m² ha⁻¹). Principal Coordinates Analysis (PCoA) arranged plots in near-perfect rainfall order, and Permutational Multivariate Analysis of Variance (PERMANOVA) confirmed significant site differences (F_3,56 = 9.1, p < 0.001). Nanophanerophytes dominated hyper-arid zones, while microphanerophytes appeared progressively with increasing rainfall. Mean annual precipitation explained 45% of the variance in mean height and 34% of Shannon diversity but only 5% of stem density. Indicator value analysis highlighted Montinia caryophyllacea for Warmbad (IndVal = 100), Rhigozum trichotomum (75.8) for Gibeon, Senegalia senegal (72.6) for Otjimbingwe, and Senegalia mellifera (97.3) for Ovitoto. Rainfall significantly influences woody structure and diversity; however, other factors also modulate density and regeneration dynamics. This quantitative baseline can serve as a practical toolkit for designing site-specific management strategies across Namibia’s aridity gradient. Full article

Industrial energy systems are increasingly required to reduce operating costs and CO₂ emissions while integrating variable renewable energy sources. Managing these objectives under uncertainty requires advanced optimization strategies capable of delivering reliable and real-time decisions. To address these challenges, this study focuses on the short-term operational planning of an industrial energy supply system using the rolling horizon approach (RHA). The RHA offers an effective framework to handle uncertainties by repeatedly updating forecasts and re-optimizing over a moving time window, thereby enabling adaptive and responsive energy management. To solve the resulting nonlinear and constrained optimization problem at each RHA iteration, we propose a novel hybrid algorithm that combines Bayesian optimization (BO) with the Interior Point OPTimizer (IPOPT). While global deterministic and stochastic optimization methods are frequently used in practice, they often suffer from high computational costs and slow convergence, particularly when applied to large-scale, nonlinear problems with complex constraints. To overcome these limitations, we employ the BO–IPOPT, integrating the global search capabilities of BO with the efficient local convergence and constraint fulfillment of the IPOPT. Applied to a large-scale real-world case study of a food and cosmetic industry in Germany, the proposed BO–IPOPT method outperformed state-of-the-art solvers in both solution quality and robustness, achieving up to 97.25%-better objective function values at the same CPU time. Additionally, the influence of key parameters, such as forecast uncertainty, optimization horizon length, and computational effort per RHA iteration, was analyzed to assess their impact on system performance and decision quality. Full article

In the forest ecosystems of Central European Russia, the influence of forest edges on the spatial distribution of Drosophilidae was studied for the first time. The research was conducted during the period of 2021–2022 in the Republic of Mordovia. Beer traps baited with fermented beer and sugar were used to collect Drosophilidae. Two study plots were selected, differing in their forest edges, tree stands, and adjacent open ecosystems. In both cases, the forest directly bordered an open ecosystem. Edges serve as transitional biotopes, where both forest and meadow (open area) faunas coexist. Knowing that many drosophilid species prefer forest habitats, we designated forest interior sites as control points. Traps were set at heights of 1.5 m (lower) and 7.5 m (upper) on trees. A total of 936 specimens representing 27 species were collected. Nine species were common across all traps, while ten species were recorded only once. At the forest edges, 23 species were captured across both heights, compared to 19 species in the forest interiors. However, the total abundance at the forest edges was 370 specimens, while it was 1.5 times higher in the forest interiors. Both abundance and species richness varied between plots. Margalef’s index was higher at the forest edges than in the forest interiors, particularly at 1.5 m height at the edge and at 7.5 m height in the forest interior. Shannon and Simpson indices showed minimal variation across traps at different horizontal and vertical positions. The highest species diversity was observed among xylosaprobionts (9 species) and mycetophages (8 species). All ecological groups were represented at the forest edges, whereas only four groups were recorded in the forest interiors, with the phytosaprophagous species Scaptomyza pallida being absent. In general, both species richness and drosophilid abundance increased in the lower strata, both at the forest edge and within the interior. Using the R package Indicspecies, we identified Gitona distigma as an indicator species for the forest edge and Scaptodrosophila rufifrons as an indicator for the forest interior in the lower tier for both plots. In addition, Drosophila testacea, D. phalerata, and Phortica semivirgo were found to be indicator species for the lower tier in both plots, while Leucophenga quinquemaculata was identified as an indicator species for the upper tier at the second plot. Full article

This paper presents an accurate analysis of the power losses of an interior permanent magnet synchronous motor fed by a cascaded H-bridge multilevel inverter. The main goal of this study is to investigate the impact of the cascaded h-bridge inverter, multicarrier PWM strategies, and inverter switching frequency on the synchronous motor power losses. With this aim in mind, a detailed frequency domain power analysis was carried out on motor power losses at different operating points in the frequency–torque plane. Motor power losses were further categorized into fundamental and harmonic power losses. This evaluation involved driving the power converter using six distinct multicarrier PWM strategies at four different switching frequencies. Additionally, a comparison was conducted with a conventional two-level PWM inverter to quantify the reduction in motor power losses. The experimental results show that the cascaded h-bridge inverter guarantees a notable increase in the motor efficiency, up to 7%, and losses in segregation at the fundamental frequency, if compared to the standard two-level PWM inverter, especially at low speed and with partial-load conditions. Such results mark out the cascaded H-bridge inverter as a valuable choice, also with regard to low-voltage drive applications. Full article

Traditional approaches in tunnel lighting have been directed toward the installation of appropriate luminaires in the intermediate and transitional sections with the simple objective of diminishing the effect of delayed visual accommodation during daylight hours. Such efforts run in parallel with the target of keeping the huge electrical use at the lowest level. Nevertheless, inadequate attention has been conceded to the interior areas, whose noticeable longitude in several instances, and subsequently the duration of occupancy of the users, can produce discomfort in the majority of the tunnel or underground passageway. It is in this region where the flicker effect presents a more remarkable impact. Although such effect is in fact uncomfortable, the strategies to eliminate it efficiently have not been developed in depth and the result is still deserving, especially in terms of sustainability. The reasons for this neglect, as well as some particularities and solutions, are exposed and discussed in the present article. Specifically, it is proved that the use of sunlight can be an adequate initiative and a positive energy input into design and retrofit tunnels capable of hampering or totally avoiding such unwanted effect. The innovative tunnel geometry explained in this manuscript is not cylindrical, and it is not based in revolution forms. Thus, it prevents the appearance of such unnerving visual effects, which compromise sustainability and endanger security. We are in the position to explain how the vector field generated by the normal to the points of the novel surface displayed remains non-parallel, ensuring appropriate diffusivity and, consequently, an even distribution of radiated energy. In the same manner, the notion of the tunnel is extended from a linear system to a veritable network of galleries, which can traverse in space bi- or even three-dimensionally. Accordingly, we will offer diverse instances of junctions and splices that further enhance the permeability into the terrain, augmenting the resilience capabilities of this disruptive technology. With all the former, a net reduction of costs reaching 25% can be easily expected with revenues. Full article

Bilinear systems can be developed from the point of view of time-varying linear differential equations or from the symmetry of Lie theory, in particular Lie algebras, Lie groups, and Lie semigroups. For bilinear control systems with bounded control range, we analyze when a unique control set (i.e., a maximal set of approximate controllability) with nonvoid interior exists, for the induced system on projective space. We use the system semigroup by considering piecewise constant controls and use spectral properties to extend the result to bilinear systems in ${\mathbb{R}}^d$. The contribution of this paper highlights the relationship between all the existent control sets. We show that the controllability property of a bilinear system is equivalent to the existence and uniqueness of a control set of the projective system. Full article

We explore chaos, local dynamics, codimension-one, and codimension-two bifurcations of an asymmetric discrete predator–prey model. More precisely, for all the model’s parameters, it is proved that the model has two boundary fixed points and a trivial fixed point, and also under parametric conditions, it has an interior fixed point. We then constructed the linearized system at these fixed points. We explored the local behavior at equilibria by the linear stability theory. By the series of affine transformations, the center manifold theorem, and bifurcation theory, we investigated the detailed codimensions-one and two bifurcations at equilibria and examined that at boundary fixed points, no flip bifurcation exists. Furthermore, at the interior fixed point, it is proved that the discrete model exhibits codimension-one bifurcations like Neimark–Sacker and flip bifurcations, but fold bifurcation does not exist at this point. Next, for deeper understanding of the complex dynamics of the model, we also studied the codimension-two bifurcation at an interior fixed point and proved that the model exhibits the codimension-two 1:2, 1:3, and 1:4 strong resonances bifurcations. We then investigated the existence of chaos due to the appearance of codimension-one bifurcations like Neimark–Sacker and flip bifurcations by OGY and hybrid control strategies, respectively. The theoretical results are also interpreted biologically. Finally, theoretical findings are confirmed numerically. Full article

The natural gas pipeline network transmission system involved in the coordinated operation of pipeline networks and gas-fired power generation facilities is complex. It consists of multiple components, such as gas sources, users, valves, compressor stations, and pipelines. The addition of natural gas-fired power generation facilities overlaps with the high and low peak periods of civil gas, imposing dual peak-shaving pressures on pipeline networks and requiring more stringent operational control strategies for maintaining system stability. To address the aforementioned issues and improve the overall operating revenues of the system, we proposed the coordinated optimization model of gas-fired power generation facilities, pipeline networks, gas storage, and compressor stations. The optimization algorithm is written using the penalty function method of the Interior Point OPTimizer (IPOPT) solver. Meanwhile, the basic parameters of the system’s pipeline networks, users, gas storage, natural gas-fired power generation facilities, compressors, and electricity prices were input into the solver. The research results reveal that the algorithm ensures solution accuracy while accounting for computational efficiency and practical applicability. The algorithm can be used to effectively calculate the ideal coordinated operation solution, significantly improve the operating revenues of the system, and achieve safe, stable, coordinated, and efficient operation of the system. Full article

This research presents a method for improving the regenerative efficiency of interior permanent magnet synchronous motors (IPMSMs) used in traction applications such as electric vehicles. In conventional powertrain control, the maximum torque per ampere (MTPA) strategy is commonly applied in the constant-torque region. However, this approach does not account for the combined losses of both the motor and inverter. In this study, overall system efficiency is investigated, and an improved current combination is proposed to minimize total losses. The single switching method is employed in the inverter due to its simplicity and its ability to reduce inverter losses. Simulations incorporating both motor and inverter losses were performed for two driving conditions around the MTPA current point. The results show that the optimal current combination slightly deviates from the MTPA point and leads to a slight improvement in efficiency. Experimental results under the two steady-state driving torque and angular velocity conditions confirm that the optimized current combination enhances system efficiency. Furthermore, simulations based on the Urban Dynamometer Driving Schedule predict an increase in recovered energy of approximately 1%. The proposed control strategy is simple, easy to implement, and enables the powertrain to operate with highly efficient current references. Full article

In this design, foam packaging for consumer products is replaced by the kraft paper cushioning system. The kraft paper is made into a cylindrical structure, with small cylindrical structures pasted to its outer walls. The cylindrical structure can withstand a high amount of stress, internally and externally. These cylindrical structures’ center points make an imaginary equilateral triangle. Therefore, the applied load is distributed equally across the cylinders and hexagonal structures. We can replace foam packaging with this kraft paper packaging. This design is expected to provide a more eco-friendly product than a normal packaging system. The interior design for the kraft paper is created as integrated cylindrical structures designed using Computer Aided Drawing (CAD). Various tests, such as on compression, impact, and vibration, were carried out. In this design, stimulation, cost comparison of the design, and manufacturing feasibility were examined. Full article

This study presents a sustainable and adaptive approach to mineral processing. A hybrid intelligent control system was developed to beneficiate fine chromite ore in a jigging machine. The objective is to enhance separation efficiency and reduce chromium losses through real-time optimization of process parameters under variable feed conditions. The method addresses ore composition fluctuations by integrating three components: Physical modeling of particle motion, regression analysis, and neural network-based prediction. The jig bed level and pulsation frequency are used as control variables, while the Cr₂O₃ content in the feed ($C_r$) is treated as a disturbance. A neural network predicts the Cr₂O₃ content in the concentrate ($C_c$) and in the tailings ($C_t$), representing chromite-rich and gangue fractions, respectively. The optimization is performed using a constrained Interior-Point algorithm. The model demonstrates high predictive accuracy, with a mean squared error (MSE) below 0.01. The proposed control algorithm reduces chromium losses in tailings from 7.5% to 5.5%, while improving concentrate quality by 3–6%. A real-time human–machine interface (HMI) was developed in SIMATIC WinCC for process visualization and control. The hybrid framework can be adapted to other mineral processing systems by adjusting the model structure and retraining the neural network on new ore datasets. Full article

Prefabricated components inevitably generate numerous assembly joints during installation, with each 1 mm increase in joint width correlating to a 15–20% elevation in the annual occurrence frequency of the frost formation risk. In the Inner Mongolia Region, the water migration at wall connection interfaces during winter significantly exacerbates freeze–thaw damage due to persistent thermal gradients. A coupled heat–moisture transfer model incorporating gas–liquid–solid phase transitions was developed, with the liquid moisture content and temperature gradient as dual driving forces. A validation against internationally recognized BS EN 15026:2007 benchmark cases confirmed the model robustness. The prefabricated sandwich insulation walls reconstructed with region-specific volcanic ash materials underwent a comparative evaluation of temperature and relative humidity distributions under varied winter conditions. Furthermore, we analyze and assess the potential for freezing at connection points and identify the specific areas at risk. Synergistic effects between assembly gaps and indoor–outdoor environmental interactions on wall performance degradation were systematically assessed. The results indicated that, across all working conditions, both the temperature and relative humidity at each wall measurement point underwent periodic variations influenced by the outdoor environment. These fluctuations decreased in amplitude from the exterior to the interior, accompanied by a noticeable delay effect. Specifically, at Section 2, the wall temperatures at points B2–B8 were higher compared to those at A2–A8 of Section 1. The relative humidity gradient remained relatively stable at each measurement point, while the temperature fluctuation amplitude was smaller by 2.58 ± 0.3 °C compared to Section 1. Under subfreezing conditions, Section 1 demonstrates a marked reduction in relative humidity (Cases 1-3 and 2-3) compared to reference cases, which is indicative of internal ice crystallization. Conversely, Section 2 maintains higher relative humidity values under identical therma. These findings suggest that prefabricated building joints significantly impact indoor and outdoor wall temperatures, potentially increasing the indoor heat loss and accelerating temperature transfer during winter. Full article

With accelerating urbanization, the outdoor thermal environment has become a critical factor affecting the thermal comfort of public spaces, particularly in high-density commercial districts and pedestrian-concentrated areas. To enhance thermal comfort and livability in public outdoor space, this study proposes a thermal demand-responsive design approach that integrates thermal conditions with pedestrian flow dynamics. A commercial pedestrian mall featuring semi-open public spaces and air-conditioned interior retail areas was selected as a case study. Computational Fluid Dynamics (CFD) simulations were conducted based on design-phase documentation and field measurements to model the thermal environment. The Universal Thermal Climate Index (UTCI) was employed to assess thermal comfort levels, and thermal discomfort was further quantified using the Heat Discomfort Index (HI). Simultaneously, pedestrian density distribution (λ) was analyzed using the agent-based simulation software MassMotion (Version 11.0). A demand of thermal comfort (DTC) index was developed by coupling UTCI-based thermal conditions with pedestrian density, enabling the spatial quantification of thermal demand across the whole commercial pedestrian mall. For example, in a sidewalk area parallel to the main street, several points exhibited high discomfort levels (HI = 0.95) but low pedestrian volume, resulting in DTC values approximately 0.2 units lower than adjacent zones with lower discomfort levels (HI = 0.7) but higher foot traffic. Such differences demonstrate how DTC can reveal priority areas for intervention. Key zones requiring thermal improvement were identified based on DTC values, providing a quantitative foundation for outdoor thermal environment design. This method provides both a theoretical foundation and a practical tool for the sustainable planning and optimization of urban public spaces. Full article