Search Results (166)

The detection of trace chemicals at low and ultra-low concentrations is critical for applications in environmental monitoring, medical diagnostics, food safety and other fields. Conventional detection techniques often lack the required sensitivity, specificity, or cost-effectiveness, making real-time, in situ analysis challenging. Surface-enhanced Raman spectroscopy (SERS) is a powerful analytical tool, offering improved sensitivity through the enhancement of Raman scattering by plasmonic nanostructures. While noble metals such as Ag and Au are currently the reference choices for SERS substrates, fabrication methods should balance enhancement efficiency, reproducibility and scalability. In this study, we propose a novel approach for SERS substrate fabrication using reactive Aerosol Jet Printing (r-AJP) as an innovative additive manufacturing technique. The r-AJP process enables in-flight Ag seed reduction and nucleation of Ag nanoparticles (NPs) by mixing silver nitrate and ascorbic acid aerosols before deposition, as suggested by computational fluid dynamics (CFD) simulations. The resulting coatings were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses, revealing the formation of nanoporous crystalline Ag agglomerates partially covered by residual matter. The as-prepared SERS substrates exhibited remarkable SERS activity, demonstrating a high enhancement factor (10⁶) for rhodamine (R6G) detection. Our findings highlight the potential of r-AJP as a scalable and cost-effective fabrication strategy for next-generation SERS sensors, paving the way for the development of a new additive manufacturing tool for noble metal material deposition. Full article

Tribological processes in extreme environments pose serious material challenges, requiring coatings that resist both wear and corrosion. This review summarizes recent advances in protective coatings engineered for extreme environments such as high temperatures, chemically aggressive media, and high-pressure and abrasive domains, as well as cryogenic and space applications. A comprehensive overview of promising coating materials is provided, including ceramic-based coatings, metallic and alloy coatings, and polymer and composite systems, as well as nanostructured and multilayered architectures. These materials are deployed using advanced coating technologies such as thermal spraying (plasma spray, high-velocity oxygen fuel (HVOF), and cold spray), chemical and physical vapor deposition (CVD and PVD), electrochemical methods (electrodeposition), additive manufacturing, and in situ coating approaches. Key degradation mechanisms such as adhesive and abrasive wear, oxidation, hot corrosion, stress corrosion cracking, and tribocorrosion are examined with coating performance. The review also explores application-specific needs in aerospace, marine, energy, biomedical, and mining sectors operating in aggressive physiological environments. Emerging trends in the field are highlighted, including self-healing and smart coatings, environmentally friendly coating technologies, functionally graded and nanostructured coatings, and the integration of machine learning in coating design and optimization. Finally, the review addresses broader considerations such as scalability, cost-effectiveness, long-term durability, maintenance requirements, and environmental regulations. This comprehensive analysis aims to synthesize current knowledge while identifying future directions for innovation in protective coatings for extreme environments. Full article

The electrocatalytic CO₂ reduction reaction (CO₂RR) offers an energy-saving and environmentally friendly approach to producing hydrocarbon fuels. The use of a gas diffusion electrode (GDE) flow cell has generally improved the rate of CO₂RR, while the gas diffusion layer (GDL) remains a significant challenge. In this study, we successfully engineered a novel metal–organic framework (MOF) heterojunction through the controlled coating of zeolitic imidazolate framework (ZIF-L) on ultrathin nickel—metal–organic framework (Ni-MOF) nanosheets. This innovative architecture simultaneously integrates GDL functionality and exposes abundant solid–liquid–gas triple-phase boundaries. The resulting Ni-MOF@ZIF-L heterostructure demonstrates exceptional performance, achieving a formate Faradaic efficiency of 92.4% while suppressing the hydrogen evolution reaction (HER) to 6.7%. Through computational modeling of the optimized heterojunction configuration, we further elucidated its competitive adsorption behavior and electronic modulation effects. The experimental and theoretical results demonstrate an improvement in electrochemical CO₂ reduction activity with suppressed hydrogen evolution for the heterojunction because of its hydrophobic interface, good electron transfer capability, and high CO₂ adsorption at the catalyst interface. This work provides a new insight into the rational design of porous crystalline materials in electrocatalytic CO₂RR. Full article

Amorphous boron powder, as a high-energy fuel, is widely used in the energy sector. However, its ignition and combustion difficulties have long limited its performance in propellants, explosives, and pyrotechnics. In this study, Mg/Al-coated boron powder with enhanced combustion properties was synthesized using the electrical explosion method. To investigate the effect of Mg/Al coating on the ignition and combustion behavior of boron powder, four samples with different Mg/Al coating contents (4 wt.%, 6 wt.%, 8 wt.%, and 10 wt.%) were prepared. Compared with raw B95 boron powder, the coated powders showed a significant reduction in particle size (from 2.9 μm to 0.2–0.3 μm) and a marked increase in specific surface area (from 10.37 m²/g to over 20 m²/g). The Mg/Al coating formed a uniform layer on the boron surface, which reduced the ignition delay time from 143 ms to 40–50 ms and significantly improved the combustion rate, combustion pressure, and combustion calorific value. These results demonstrate that Mg/Al coating effectively promotes rapid ignition and sustained combustion of boron particles. Furthermore, with the increasing Mg/Al content, the ignition delay time decreased progressively, while the combustion rate, combustion pressure, and heat release increased accordingly, reaching optimal values at 8 wt.% Mg/Al. An analysis of the combustion residues revealed that both Mg and Al reacted with boron oxide to form new multicomponent compounds, which reduced the barrier effect of the oxide layer on oxygen diffusion into the boron core, thereby facilitating continuous combustion and high heat release. This work innovatively employs the electrical explosion method to prepare dual-metal-coated boron powders and, for the first time, reveals the synergistic promotion effect of Mg and Al coatings on the ignition and combustion performance of boron. The results provide both experimental data and theoretical support for the high-energy release and practical application of boron-based fuels. Full article

To enhance interaction with the host tissue and protect the metal surface, various surface treatments can be applied to dental implants. This study aimed to produce layer-by-layer (LbL) films by alternated immersion of the titanium sample into polyacrylic acid (PAA) and chitosan solutions, obtaining a PAA/chitosan bilayer architecture, seeking to improve the corrosion resistance. For this purpose, 03 experimental groups (n = 05) were performed: Ti-Cp (as control), Ti-Cp+8 bilayers PAA/chitosan, and Ti-Cp+12 bilayers PAA/chitosan. The corrosion behavior was assessed by using open-circuit potential (OCP), potentiodynamic polarization curves (PPcs) and electrochemical impedance spectroscopy (EIS) techniques, conducted in 0.9 wt% NaCl solution at a controlled temperature of 25 ± 1 °C. The samples were characterized morphologically and structurally by atomic force microscope (AFM), scanning electron microscopy/energy-dispersive X-ray (SEM/EDX), and X-ray diffraction (XRD) techniques before and after the corrosion tests. The electrochemical results significantly highlight the beneficial influence of coatings based on PAA/chitosan in enhancing the corrosion resistance of titanium. These findings not only corroborate the feasibility of using alternative materials for the protection of titanium but also open new possibilities for the development of innovative coatings that can be applied within the biomedical sector, serving as mediators for medicinal purposes, particularly in osteoconductive interventions. Full article

The growing prevalence of bacterial infections and the alarming rise of antimicrobial resistance (AMR) have driven the need for innovative antimicrobial coatings for medical implants and biomaterials. However, implant surface properties, such as roughness, chemistry, and reactivity, critically influence biological interactions and must be engineered to ensure biocompatibility, corrosion resistance, and sustained antibacterial activity. This review evaluates three principal categories of antimicrobial agents utilized in surface functionalization: metal/metaloxide nanoparticles, antibiotics, and phytochemical compounds. Metal/metaloxide-based coatings, especially those incorporating silver (Ag), zinc oxide (ZnO), and copper oxide (CuO), offer broad-spectrum antimicrobial efficacy through mechanisms such as reactive oxygen species (ROS) generation and bacterial membrane disruption, with a reduced risk of resistance development. Antibiotic-based coatings enable localized drug delivery but often face limitations related to burst release, cytotoxicity, and diminishing effectiveness against multidrug-resistant (MDR) strains. In contrast, phytochemical-derived coatings—using bioactive plant compounds such as curcumin, eugenol, and quercetin—present a promising, biocompatible, and sustainable alternative. These agents not only exhibit antimicrobial properties but also provide anti-inflammatory, antioxidant, and osteogenic benefits, making them multifunctional tools for implant surface modification. The integration of these antimicrobial strategies aims to reduce bacterial adhesion, inhibit biofilm formation, and enhance tissue regeneration. By leveraging the synergistic effects of metal/metaloxide nanoparticles, antibiotics, and phytochemicals, next-generation implant coatings hold the potential to significantly improve infection control and clinical outcomes in implant-based therapies. Full article

This article presents a comprehensive overview of recent advancements in photonic crystal fiber (PCF)-based sensors, with a particular focus on the surface plasmon resonance (SPR) phenomenon for biosensing. With their ability to modify core and cladding structures, PCFs offer exceptional control over light guidance, dispersion management, and light confinement, making them highly suitable for applications in refractive index (RI) sensing, biomedical imaging, and nonlinear optical phenomena such as fiber tapering and supercontinuum generation. SPR is a highly sensitive optical phenomenon, which is widely integrated with PCFs to enhance detection performance through strong plasmonic interactions at metal–dielectric interfaces. The combination of PCF and SPR technologies has led to the development of innovative sensor geometries, including D-shaped fibers, slotted-air-hole structures, and internal external metal coatings, each optimized for specific sensing goals. These PCF-SPR-based sensors have shown promising results in detecting biomolecular targets such as excess cholesterol, glucose, cancer cells, DNA, and proteins. Furthermore, this review provides an in-depth analysis of key design parameters, plasmonic materials, and sensor models used in PCF-SPR configurations, highlighting their comparative performance metrics and application prospects in medical diagnostics, environmental monitoring, and chemical analysis. Thus, an exhaustive analysis of various sensing parameters, plasmonic materials, and sensor models used in PCF-SPR sensors is presented and explored in this article. Full article

Using low-cost transition-metal chlorides and furfuryl alcohol as raw materials, the (TiZrHfNbTa)C precursor was prepared, and a three-dimensional braided carbon fiber preform (C/C) coated with pyrolytic carbon (PyC) was used as the reinforcing material. A C/C-(TiZrHfNbTa)C composite was successfully fabricated through the precursor impregnation pyrolysis (PIP) process. Under extreme oxyacetylene ablation conditions (2311 °C/60 s), this composite material demonstrated outstanding ablation resistance, with a mass ablation rate as low as 0.67 mg/s and a linear ablation rate of only 20 μm/s. This excellent performance can be attributed to the dense (HfZr)₆(TaNb)₂O₁₇ oxide layer formed during ablation. This oxide layer not only has an excellent anti-erosion capability but also effectively acts as an oxygen diffusion barrier, thereby significantly suppressing further ablation and oxidation within the matrix. This study provides an innovative strategy for the development of low-cost ultra-high-temperature ceramic precursors and opens up a feasible path for the efficient preparation of C/C-(TiZrHfNbTa)C composites. Full article

Diamond-like carbon (DLC) coatings have emerged as a focal point in advanced carbon materials research due to exceptional tribological properties, including ultralow friction coefficient, exceptional wear resistance, ultrahigh hardness, and chemical inertness. Deposition of DLC coatings on metal components represents an innovative solution to enhance wear resistance in engineering applications. However, suboptimal adhesion strength between coatings and substrates, coupled with inherent material limitations, critically compromises the tribological performance. This review systematically examines recent advances in improving the wear resistance of DLC-coated metal components. First, the fundamental wear mechanisms governing both metallic substrates and DLC coatings under service conditions are elucidated. Next, three pivotal technologies, substrate material treatment/strengthening, coating structure design, and elemental doping, all demonstrating significant efficacy in wear resistance enhancement, are critically analyzed. Furthermore, a comparative assessment of these techniques reveals the synergistic potential in hybrid approaches. Finally, a concise summary of the outlook is presented. Full article

The primary challenge associated with stainless steel in fuel cell operation is its susceptibility to corrosion, which leads to increased contact resistance and subsequent degradation of electrochemical performance. In general, the protective layers have been loaded onto the metal surface by widely used traditional techniques such as physical vapor deposition (PVD), or cathode arc ion plating. However, the above sputtering and evaporation ways require a high-vacuum condition, complicated experimental setups, higher costs, and an elevated temperature. Therefore, herein the achievement for uniform coatings over a large surface area has been realized by using a cost-effective strategy through a complete wet chemical process. The synergistic regulation of two conductive components and a plastic additive has been employed together with the entrapment of a surfactant to optimize the microstructure of the coating surface. The assembly of layered graphite and a polystyrene sphere could maintain both the high corrosion resistance feature and excellent electrical conductivity. In particular, the intrinsic vacant space in the above physical barriers has been filled with fine powders of indium tin oxide (ITO) due to its small size, and the interconnected conductive network with vertical/horizontal directions would be formed. All the key technical targets based on the U.S. Department of Energy (DOE) have been achieved under the simulated operating environments of a proton exchange membrane fuel cell. The corrosion current density has been measured as low as 0.52 μA/cm² (for the sample of graphite/mixed layer) over the applied potentials from −0.6 V to 1.2 V and its protective efficiency is evaluated to be 99.8%. The interfacial contact resistance between the sample and the carbon paper is much less than 10 mΩ·cm² (3.4 mΩ·cm²) under a contact pressure of 165 N/cm². The wettability has been investigated and its contact angle has been evolved from 48° (uncoated sample) to even 110°, providing superior hydrophobicity to prevent water penetration. Such an innovative approach opens up new possibilities for improving the durability and reducing the costs of carbon-based coatings. Full article

Chinese lacquer, a historically significant bio-based coating, has garnered increasing attention in sustainable materials research due to its outstanding corrosion resistance, thermal stability, and environmental friendliness. Its curing process relies on the laccase-catalyzed oxidation and polymerization of urushiol to form a dense lacquer film. However, the stringent temperature and humidity requirements (20–30 °C, 70–80% humidity) and a curing period that can extend over several weeks severely constrain its industrial application. Recent studies have significantly enhanced the curing efficiency through strategies such as pre-polymerization control, metal ion catalysis (e.g., Cu²⁺ reducing drying time to just one day), and nanomaterial modification (e.g., nano-Al₂O₃ increasing film hardness to 6H). Nevertheless, challenges remain, including the sensitivity of laccase activity to environmental fluctuations, the trade-off between accelerated curing and film performance, and issues related to toxic pigments and VOC emissions. Future developments should integrate enzyme engineering (e.g., directed evolution to broaden laccase tolerance), intelligent catalytic systems (e.g., photo-enzyme synergy), and green technologies (e.g., UV curing), complemented by multiscale modeling and circular design strategies, to drive the innovative applications of Chinese lacquer in high-end fields such as aerospace sealing and cultural heritage preservation. Full article

GBM is the most common and aggressive primary brain tumor in adults, characterized by low survival rates, high recurrence, and resistance to conventional therapies. Traditional diagnostic and therapeutic methods remain limited due to the difficulty in permeating the blood–brain barrier (BBB), diffuse tumor cell infiltration, and tumor heterogeneity. In recent years, nano-based technologies have emerged as innovative approaches for the detection and treatment of GBM. A wide variety of nanocarriers, including dendrimers, liposomes, metallic nanoparticles, carbon nanotubes, carbon dots, extracellular vesicles, and many more demonstrate the ability to cross the BBB, precisely deliver therapeutic agents, and enhance the effects of radiotherapy and immunotherapy. Surface functionalization, peptide modification, and cell membrane coating improve the targeting capabilities of nanostructures toward GBM cells and enable the exploitation of their photothermal, magnetic, and optical properties. Furthermore, the development of miRNA nanosponge systems offers the simultaneous inhibition of multiple tumor growth mechanisms and the modulation of the immunosuppressive tumor microenvironment. This article presents current advancements in nanotechnology for GBM, with a particular focus on the characteristics and advantages of specific groups of nanoparticles, including their role in radiosensitization. Full article

This study explores an innovative method for depositing graphene directly onto metal surfaces, using cyclic voltammetry with a suspension of graphene in water. Most electrochemical deposition techniques up to now have concentrated on graphene oxide (GO) rather than pure graphene, largely because GO disperses more readily in water. This characteristic makes GO simpler to manipulate and apply in deposition processes, giving it an advantage in terms of usability and practicality. We demonstrated that graphene can indeed be deposited onto metal surfaces using this innovative electrochemical approach. We conducted a thorough characterization of the resulting graphene deposits, employing advanced techniques, including interferometric microscopy, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and Raman spectroscopy. These analyses provided us with insights into the structural, chemical, and morphological characteristics of the graphene deposits. This comparison allowed us to assess the strengths and potential improvements needed for this direct deposition method, as it offers a more sustainable and streamlined alternative to conventional GO-based processes. One important finding is that, while the quality of these direct graphene deposits has not yet reached the level of GO-based coatings, this new approach has some compelling advantages. Specifically, it is a simpler, more environmentally friendly process that could streamline production and reduce the environmental impact compared to traditional methods using GO. Full article

Lightning-induced ablation can severely compromise the structural integrity of composite materials. While metallic coatings have been widely studied for lightning protection, this study focuses on a different application—applying aluminum coatings to repaired composite materials. The goal is to address the challenge of ensuring that composite structures can withstand subsequent lightning strikes after repair. This study utilized an electro-thermal coupling finite element analysis model to assess the damage to laminates and the effectiveness of identical material patches for repairs. It is found that although patched laminates may experience more severe ablation damage when subjected to the same lightning strike, the application of an aluminum coating can significantly mitigate damage. Furthermore, this study improved the aluminum coating scheme, investigating the impact of coating width and shape on its lightning protection efficacy. The results indicate that a cross-shaped aluminum coating provides significant advantages in protecting repaired laminates against lightning strike, with a significant reduction compared to the uncoated controls. However, it was noted that narrowing the coating width could limit the coating’s ability to handle high current densities, potentially affecting its protective capabilities. These insights may contribute to the advancement of composite material repair strategies and the development of innovative protective structures against lightning damage. Full article

Nanotechnology is emerging as an innovative and sustainable agricultural approach that minimizes environmental impacts by developing nanostructured materials to promote plant growth and combat plant-parasitic nematodes (PPNs). Plant-based nanoparticles (NPs) are attracting increasing attention as they are more environmentally friendly, economical and biocompatible compared to traditional chemical and physical synthesis methods. The ability of plants to reduce and stabilize metal ions and form NPs of specific size and morphology through their biochemical content offers great advantages for agricultural applications. Phytochemicals produced by plants enable the biological synthesis of metal and metal oxide NPs by acting as reducing agents and coating agents in NP synthesis. The effects of plant-based NPs in nematode control are based on mechanisms such as the disruption of the nematode cuticle, induction of oxidative stress and interference with parasite metabolism. Several plant species have been investigated for the synthesis of metal and metal oxide nanoparticles such as silver (Ag-NPs), nickel oxide (NiO-NPs), zinc oxide (ZnO-NPs), copper oxide (CuO-NPs) and iron (Fe-NPs). These biologically synthesized NPs show potent biological activity against important PPNs such as Meloidogyne spp., Pratylenchus spp. and Heterodera spp. The integration of plant-derived NPs into agricultural systems has significant potential for plant growth promotion, nematode suppression and soil health improvement. This review highlights their role in reducing environmental impact in agricultural applications by examining the sustainable synthesis processes of plant-based NPs. Full article