Search Results (298)

Urban parking around the world faces similar challenges of inadequate space, pollution, and carbon emissions. Although various smart parking technologies have been tested and implemented, they primarily aim to reduce the time spent searching for parking, without considering the impact on air quality. In this study, the air quality in three urban garages was investigated with portable instruments at the entrance and exit gates and inside the garages. Garage emissions measured include CO₂, PM_2.5, PM₁₀, NO₂, and total VOCs. The results suggested that the PM_2.5 levels in these garages tend to be higher than the ambient levels. The emissions also exhibit seasonal variations, with the highest concentrations occurring in the summer, which are 20.32 µg/m³ in Campus Green, 14.25 µg/m³ in CCM, and 15.23 µg/m³ in Washington Park garages, respectively. PM_2.5 measured from these garages is strongly correlated (with an R² of 0.64) with ambient levels. CO₂ emissions are higher than ambient levels but within the indoor air quality limit. This suggests that urban garages in Cincinnati tend to enrich ambient air concentrations, which can affect garage users and garage attendants. Portable sensors are capable of long-term emission monitoring and are compatible with other technologies in smart garage development. With portable air sensors becoming increasingly accessible and affordable, there is an opportunity to integrate these devices with smart garage management systems to enhance the sustainability of parking garages. Full article

The reliability of passive samplers in measuring volatile organic compounds (VOCs) in indoor air depends on whether the uptake rate is constant given the environmental conditions and sampler exposure duration. The first phase of this study evaluated the performance of charcoal-based, solvent-extracted passive samplers (e.g., Radiello^® 130 passive samplers with white diffusive bodies) over exposure periods ranging from 1 week to 1 year in a test house with known vapor intrusion (VI). Chloroform %Bias values exceeded the ±30% acceptance criterion after 4 weeks exposure. Benzene, hexane, and trichloroethylene (TCE) concentrations were within the acceptance criterion for up to three months. Toluene and tetrachloroethylene (PCE), the two least volatile compounds, demonstrated uniform uptake rates over one year. In the second phase of this study, testing of the longer exposure times of 6 months and 1 year were evaluated with three additional passive samplers: Waterloo Membrane Sampler^TM (WMS^TM), SKC 575 with secondary diffusive cover, and Radiello^® 130 passive samplers with yellow diffusive bodies. The SKC 575 and Radiello^® 130 passive samplers produced acceptable results (%Bias ≤ 30%) over the 6-month exposure period, while the WMS^TM sampler results favored petroleum hydrocarbon more than chlorinated solvent uptake. After the 1-year exposure period, the passive sampler performances were acceptable under specific conditions of this study. The results suggest that all three samplers can produce acceptable results over exposure time periods beyond 30 days and up to a year for some compounds. Full article

Volatile organic compounds (VOCs) are highly volatile chemicals in natural and anthropogenic environments, significantly affecting indoor air quality. Major sources of indoor VOCs include emissions from building materials, furnishings, and consumer products. Natural wood products release VOCs, including terpenes and aldehydes, which exert diverse health effects ranging from mild respiratory irritation to severe outcomes, such as formaldehyde-induced carcinogenicity. The temporal dynamics of VOC emissions were investigated, and the toxicological and physiological effects of the VOCs emitted by two types of natural wood, Korean Red Pine (Pinus densiflora) and Japanese Cypress (Chamaecyparis obtusa), were evaluated. Using female C57BL/6 mice as an animal model, the exposure setups included phytoncides, formaldehyde, and intact wood samples over short- and long-term durations. The exposure effects were assessed using oxidative stress markers, antioxidant enzyme activity, hepatic and renal biomarkers, and inflammatory cytokine profiles. Long-term exposure to Korean Red Pine and Japanese Cypress wood VOCs did not induce significant pathological changes. Japanese Cypress exhibited more distinct benefits, including enhanced oxidative stress mitigation, reduced systemic toxicity, and lower pro-inflammatory cytokine levels compared to the negative control group, attributable to its more favorable VOC emission profile. These findings highlight the potential health and environmental benefits of natural wood VOCs and offer valuable insights for optimizing timber use, improving indoor air quality, and informing public health policies. Full article

The emission and presence of volatile organic compounds (VOCs) in the indoor air of houses and factories has been a growing topic of debate in the industry and related research fields. Given the extended times people in modern society spend indoors, monitoring VOCs is crucial due to the associated potential health hazards, with formaldehyde being particularly noteworthy. Wood and wood-based panels (WBPs) (the latter constituting a significant segment of the wood-transforming industry, being widely used in furniture, construction, and other applications) are known sources for the emission of VOCs to indoor air. In the case of the WBPs, the emission of VOCs depends on the type and species of wood, together with industrial processing and addition of additives. This review integrates perspectives on the production processes associated with WBPs, together with the evolving global regulations, and thoroughly examines VOC sources associated with WBPs, health risks from exposure, and current analytical methods utilized for VOC detection. It comprises an overview of the WBP industry, providing relevant definitions, descriptions of manufacturing processes and adhesive use, analysis of legal constraints, and explanations of VOC source identification and describing analysis techniques utilized for VOCs in WBPs. Full article

This review examines the research progress on non-noble-metal-based catalysts for formaldehyde (HCHO) oxidation at room temperature. It begins with an introduction to the hazards of HCHO as an indoor pollutant and the urgency of its removal, comparing several HCHO removal technologies and highlighting the advantages of room-temperature catalytic oxidation. It delves into the classification, preparation methods, and regulation strategies for non-precious metal catalysts, with a focus on manganese-based, cobalt-based, and other transition metal-based catalysts. The effects of catalyst preparation methods, morphological structure, and specific surface area on catalytic performance are discussed, and the catalytic oxidation mechanisms of HCHO, including the Eley–Rideal, Langmuir–Hinshelwood, and Mars–van Krevelen mechanisms, are analyzed. Finally, the challenges faced by non-precious metal catalysts are summarized, such as issues related to the powder form of catalysts in practical applications, lower catalytic activity at room temperature, and insufficient research in the presence of multiple VOC molecules. Suggestions for future research directions are also provided. Full article

Ambient monitoring in chemical laboratories and industrial sites that use toxic, hazardous, or flammable materials is essential to protect the lives of workers, material resources, and infrastructure at these sites. In this research paper, we present an innovative approach for developing a low-cost and portable sensor node that detects and warns of hazardous chemical gas and vapor leaks. The system also enables leak location tracking using an indoor tracking and positioning system operating in ultra-wideband (UWB) technology. An array of sensors is used to detect gases, vapors, and airborne particles, while the leak location is identified through a UWB unit integrated with an Internet of Things (IoT) processor. This processor transmits real-time location data and sensor readings via wireless fidelity (Wi-Fi). The real-time indoor positioning system (IPS) can automatically select a tracking area based on the distances measured from the three nearest anchors of the movable sensor node. The environmental sensor data and distances between the node and the anchors are transmitted to the cloud in JSON format via the user datagram protocol (UDP), which allows the fastest possible data rate. A monitoring server was developed in Python to track the movement of the portable sensor node and display live measurements of the environment. The system was tested by selecting different paths between several adjacent areas with a chemical leakage of different volatile organic compounds (VOCs) in the test path. The experimental tests demonstrated good accuracy in both hazardous gas detection and location tracking. The system successfully issued a leak warning for all tested material samples with volumes up to 500 microliters and achieved a positional accuracy of approximately 50 cm under conditions without major obstacles obstructing the UWB signal between the active system units. Full article

Volatile Organic Compounds (VOCs) are important contributors to indoor and occupational air pollution, such as environments involving the extensive use of paints and solvents. The routine measurement of VOCs is often limited by resource constraints, creating a need for indirect estimation techniques. This work presents the need for a predictive framework that offers a practical, interpretable alternative to a full-spectrum chemical analysis and supports early exposure detection in resource-limited settings, contributing to environmental health monitoring and occupational risk assessment. This study explores the capability of machine learning to simultaneously predict the concentrations of five paint-related VOCs using other co-emitted VOCs along with demographic variables. Three models—Multi-Output Gaussian Process Regression (MOGP), CatBoost Multi-Output Regressor, and Multi-Output Neural Networks—were calibrated and each achieved a high predictive performance. Further, a feature importance analysis is conducted and showed that certain VOCs and some demographic variables consistently influenced the predictions across all models, pointing to common exposure determinants for individuals, regardless of their specific exposure setting. Additionally, a subgroup analysis identified the exposure disparities across demographic groups, supporting targeted risk mitigation efforts. Full article

The acceleration of industrialization and urbanization worldwide has dramatically improved living standards but has also introduced serious environmental and public health challenges. One of the most critical challenges is air pollution, particularly indoors, where individuals typically spend over 90% of their time. Ensuring good Indoor Air Quality (IAQ) is essential, especially in heavily frequented public spaces such as shopping malls. This study focuses on assessing IAQ in a large shopping mall located in Tabuk, Saudi Arabia, covering retail zones as well as an attached underground parking area. Monitoring is conducted over a continuous two-month period using calibrated instruments placed at representative locations to capture variations in pollutant levels. The investigation targets key contaminants, including carbon monoxide (CO), carbon dioxide (CO₂), fine particulate matter (PM_2.5), total volatile organic compounds (TVOCs), and formaldehyde (HCHO). The data are analyzed and compared against international and national guidelines, including World Health Organization (WHO) standards and Saudi environmental regulations. The results show that concentrations of CO, CO₂, and PM_2.5 in the shopping mall are generally within acceptable limits, with values ranging from approximately 7 to 15 ppm, suggesting that ventilation systems are effective in most areas. However, the study identifies high levels of TVOCs and HCHO, particularly in zones characterized by poor ventilation and high human occupancy. Peak concentrations reach 1.48 mg/m³ for TVOCs and 1.43 mg/m³ for HCHO, exceeding recommended exposure thresholds. These findings emphasize the urgent need for enhancing ventilation designs, prioritizing the use of low-emission materials, and establishing continuous air quality monitoring protocols within commercial buildings. Improving IAQ is not only crucial for protecting public health but also for enhancing occupant comfort, satisfaction, and overall building sustainability. This study offers practical recommendations to policymakers, building managers, and designers striving to create healthier indoor environments in rapidly expanding urban centers. Full article

Current tomato harvesters rely primarily on external color as the sole indicator of ripeness. However, this approach often results in premature harvesting, leading to insufficient lycopene accumulation and a suboptimal nutritional content for human consumption. Such limitations are especially critical in controlled-environment agriculture (CEA) systems, where maximizing fruit quality and nutrient density is essential for both the yield and consumer health. To address that challenge, this study introduces a novel, multimodal harvest readiness framework tailored to nutrient film technology (NFT)-based smart farms. The proposed approach integrates plant-level stress diagnostics and fruit-level phenotyping using wearable biosensors, AI-assisted computer vision, and non-invasive physiological sensing. Key physiological markers—including the volatile organic compound (VOC) methanol, phytohormones salicylic acid (SA) and indole-3-acetic acid (IAA), and nutrients nitrate and ammonium concentrations—are combined with phenomic traits such as fruit color (a*), size, chlorophyll index (rGb), and water status. The innovation lies in a four-stage decision-making pipeline that filters physiologically stressed plants before selecting ripened fruits based on internal and external quality indicators. Experimental validation across four plant conditions (control, water-stressed, light-stressed, and wounded) demonstrated the efficacy of VOC and hormone sensors in identifying optimal harvest candidates. Additionally, the integration of low-cost electrochemical ion sensors provides scalable nutrient monitoring within NFT systems. This research delivers a robust, sensor-driven framework for autonomous, data-informed harvesting decisions in smart indoor agriculture. By fusing real-time physiological feedback with AI-enhanced phenotyping, the system advances precision harvest timing, improves fruit nutritional quality, and sets the foundation for resilient, feedback-controlled farming platforms suited to meeting global food security and sustainability demands. Full article

Schools are vital infrastructures where students acquire essential skills and foster social values. Indoor air quality (IAQ) is of paramount importance in schools, given that students spend a considerable amount of time indoors. This study examines the influence of a natural green structure (NGS) on IAQ in an Eco-Campus classroom. The IAQ of a classroom with an NGS was compared to that of an adjacent classroom without an NGS. The thermal conditions were monitored, including air temperature (T) and relative humidity (RH), as well as indoor pollutants, including carbon dioxide (CO₂), volatile organic compounds (VOCs), and particulate matter (PM_2.5 and PM₁₀). The findings indicated a substantial improvement in indoor air quality in the classroom where the green structure was installed. This study lends support to the incorporation of biophilic solutions as sustainable approaches to fostering healthier learning environments, which in turn can lead to improvements in student performance and well-being. Full article

Air pollution is an escalating global concern with significant implications for human health and athletic performance. This narrative review synthesizes and critically compares the current literature on the impact of air pollution on health and football performance, elucidates the physiological mechanisms involved, and evaluates available mitigation strategies. Comparative studies consistently demonstrate that football players—who frequently engage in high-intensity outdoor exercise—are particularly susceptible to the harmful effects of airborne pollutants such as particulate matter (PM), volatile organic compounds (VOCs), nitrogen dioxide (NO₂), ozone (O₃), and carbon monoxide (CO). These pollutants bypass natural respiratory defenses due to increased pulmonary ventilation during exercise, reaching deeper lung regions and triggering oxidative stress, inflammation, and impaired lung function. Evidence across studies indicates that poor air quality is associated with decreased football performance, including reduced distance covered, fewer high-intensity efforts, elevated physiological strain, and diminished training adaptation. Long-term exposure exacerbates respiratory conditions, suppresses immune function, and heightens the risk of illness and injury. Furthermore, comparative genetic research highlights inter-individual variability in pollution sensitivity, with specific gene variants conferring either increased vulnerability or resilience to adverse effects. This review also explores practical and emerging mitigation strategies—such as timing training to avoid peak pollution, utilizing air quality monitoring and antioxidant-rich diets, and promoting sustainable infrastructure—to safeguard athlete health and optimize performance. Novel approaches including respiratory training, anti-smog masks, indoor sessions, and personalized recovery protocols offer additional protection and recovery support. Full article

Air pollution is a significant health concern identified by the World Health Organization (WHO) as it poses serious health risks and climate impacts. WHO indicates that 99% of the global population breathes air with pollutant levels exceeding safe guidelines. Indoor particulate level (IPL) is approximately 20% higher in naturally ventilated buildings than mechanically ventilated ones. Volatile organic compounds (VOCs), found in products such as pesticides and gasoline, and pollutants including PM2.5 and PM10 contribute to these health risks. This study aims to characterize six common household pollutants, focusing on their concentrations and potential health impacts indoor environments. By understanding the characteristics of the pollutants, indoor air quality can be improved to mitigate associated health risks. The results showed that VOC showed the highest level of concentration as 23.8% was filtered while vape showed the highest concentration of PM2.5 with 83.3% filtered. No significant difference was observed among the VOC concentrations of candles, mosquito coils, and cigarettes. For PM2.5, frying and LPG had the same levels of concentration while the other groups had similar levels. Full article

Indoor air quality (IAQ) has emerged as a critical area of research, reflecting growing concerns regarding occupant health, well-being, and comfort in enclosed environments. The increasing complexity of modern indoor spaces, coupled with rapid advancements in sensing technologies and data analysis methodologies, has intensified scientific interest in effective IAQ assessment and management. This review aims to examine current technologies and methodologies for monitoring key indoor air quality indicators. Furthermore, it offers practical recommendations for enhancing IAQ in diverse built environments and explores the integration of artificial intelligence (AI) into monitoring systems. The findings underscore the potential of AI-enhanced approaches to optimize indoor environmental conditions and support proactive air quality management strategies. Full article

Many US states have adopted regulations to divert food waste from landfills to composts. While this may lower greenhouse emissions from landfills, volatile organic compound (VOC) emissions from compost may contain hazardous air pollutants or produce odors, posing potential public health concerns. Effective methods to analyze speciated VOCs in compost are needed to better understand VOC source generation. Here, a two-component compost sampling method was developed and employed consisting of a chilled impinger and pump apparatus to trap water-soluble VOCs, and dual sorbent tubes to capture hydrophobic VOCs in yard and food/yard waste compost. VOCs were measured via headspace gas chromatography with flame ionization detection (HS-GC-FID) and thermal desorption–gas chromatography–mass spectrometry (TD-GC-MS). Overall, there was higher VOC generation within higher-temperature compost piles, with concentrations ranging up to 27,000 ppm for ethanol and 3500 ppm for methanol. Alpha-pinene and D-limonene were seen in these piles with concentrations over 1600 ppb. Methanol and ethanol were more than one thousand times as concentrated in mixed food/yard waste than yard waste alone, while terpenes were seen in slightly higher concentrations for yard waste than the mixed food/yard waste. Methanol was observed to be higher than permissible indoor levels and may pose potential health risks. Full article

Formaldehyde is the most abundant carbonyl globally and the biggest driver of cancer risk in the United States among hazardous air pollutants. Ambient formaldehyde concentration measurements are generally sparse due to high measurement costs and limited measurement infrastructure. Recent studies have used low-cost air quality sensors to affordably improve spatial coverage and provide real-time measurements. Our previous research evaluated the laboratory performance of a low-cost electrochemical formaldehyde sensor (Sensirion SFA30) over formaldehyde concentrations ranging from 0 to 76 ppb. The sensors exhibited good linearity of response, a low limit of detection, and good accuracy in detecting formaldehyde. This study evaluated the cross-sensitivity of the SFA30 and the Gravity sensors (electrochemical formaldehyde sensors) over formaldehyde concentrations ranging from 0 to 326 ppb in a laboratory evaluation system, with broadband cavity-enhanced absorption spectroscopy used to obtain the reference measurements. We evaluated the sensors in a mixture of formaldehyde with five outdoor trace gases (CO, NO, NO₂, O₃, and isobutylene) and two indoor VOCs (methanol and isopropyl alcohol). The results suggest that the Gravity sensors may be useful for outdoor formaldehyde measurements when formaldehyde levels are well above background levels and that the SFA30 sensors may be useful screening tools for indoor environments, if properly calibrated. Full article