Search Results (46)

The rapid development of nanotechnology has significantly transformed the design and performance of glucose biosensors, leading to enhanced sensitivity, selectivity, and real-time monitoring capabilities. This review highlights recent advances in glucose-sensing platforms facilitated by nanomaterials, including metal and metal oxide nanoparticles, carbon-based nanostructures, two-dimensional materials, and metal–organic frameworks (MOFs). The integration of these nanoscale materials into electrochemical, optical, and wearable biosensors has addressed longstanding challenges associated with enzyme stability, detection limits, and invasiveness. Special emphasis is placed on non-enzymatic glucose sensors, flexible and wearable devices, and hybrid nanocomposite systems. The multifunctional properties of nanomaterials, such as large surface area, excellent conductivity, and biocompatibility, have enabled the development of next-generation sensors for clinical, point-of-care, and personal healthcare applications. The review also discusses emerging trends such as biodegradable nanosensors, AI-integrated platforms, and smart textiles, which are poised to drive the future of glucose monitoring toward more sustainable and personalized healthcare solutions. Full article

The convergence of carbon nanomaterials and functional polymers has led to the emergence of smart carbon–polymer nanocomposites (CPNCs), which possess exceptional potential for next-generation sensing and actuation systems. These hybrid materials exhibit unique combinations of electrical, thermal, and mechanical properties, along with tunable responsiveness to external stimuli such as strain, pressure, temperature, light, and chemical environments. This review provides a comprehensive overview of recent advances in the design and synthesis of CPNCs, focusing on their application in multifunctional sensors and actuator technologies. Key carbon nanomaterials including graphene, carbon nanotubes (CNTs), and MXenes were examined in the context of their integration into polymer matrices to enhance performance parameters such as sensitivity, flexibility, response time, and durability. The review also highlights novel fabrication techniques, such as 3D printing, self-assembly, and in situ polymerization, that are driving innovation in device architectures. Applications in wearable electronics, soft robotics, biomedical diagnostics, and environmental monitoring are discussed to illustrate the transformative impact of CPNCs. Finally, this review addresses current challenges and outlines future research directions toward scalable manufacturing, environmental stability, and multifunctional integration for the real-world deployment of smart sensing and actuation systems. Full article

Conductive composites are a flexible class of engineered materials that combine conductive fillers with an insulating matrix—usually made of ceramic, polymeric, or a hybrid material—to customize a system’s electrical performance. By providing tunable electrical properties in addition to benefits like low density, mechanical flexibility, and processability, these materials are intended to fill the gap between conventional insulators and conductors. The increasing need for advanced technologies, such as energy storage devices, sensors, flexible electronics, and biomedical interfaces, has significantly accelerated their development. The electrical characteristics of composite materials, including metallic, ceramic, polymeric, and nanostructured systems, are thoroughly examined in this review. The impact of various reinforcement phases—such as ceramic fillers, carbon-based nanomaterials, and metallic nanoparticles—on the electrical conductivity and dielectric behavior of composites is highlighted. In addition to conduction models like correlated barrier hopping and Debye relaxation, the study investigates mechanisms like percolation thresholds, interfacial polarization, and electron/hole mobility. Because of the creation of conductive pathways and improved charge transport, developments in nanocomposite engineering, especially with regard to graphene derivatives and silver nanoparticles, have shown notable improvements in electrical performance. This work covers the theoretical underpinnings and physical principles of conductivity and permittivity in composites, as well as experimental approaches, characterization methods (such as SEM, AFM, and impedance spectroscopy), and real-world applications in fields like biomedical devices, sensors, energy storage, and electronics. This review provides important insights for researchers who want to create and modify multifunctional composite materials with improved electrical properties by bridging basic theory with technological applications. Full article

MXenes, a class of two-dimensional transition metal carbides and nitrides, emerged as a promising material for next-generation energy storage and corresponding applications due to their unique combination of high electrical conductivity, tunable surface chemistry, and lamellar structure. This review highlights recent advances in MXene-based composites, focusing on their integration into electrode architectures for the development of supercapacitors, batteries, and multifunctional devices, including triboelectric nanogenerators. It serves as a comprehensive overview of the multifunctional capabilities of MXene-based composites and their role in advancing efficient, flexible, and sustainable energy and sensing technologies, outlining how MXene-based systems are poised to redefine multifunctional energy platforms. Electrochemical performance optimization strategies are discussed by considering surface functionalization, interlayer engineering, scalable synthesis techniques, and integration with advanced electrolytes, with particular attention paid to the development of hybrid supercapacitors, triboelectric nanogenerators (TENGs), and wearable sensors. These applications are favored due to improved charge storage capability, mechanical properties, and the multifunctionality of MXenes. Despite these aspects, challenges related to long-term stability, sustainable large-scale production, and environmental degradation must still be addressed. Emerging approaches such as three-dimensional self-assembly and artificial intelligence-assisted design are identified as key challenges for overcoming these issues. Full article

Carbon dots (CDs), a class of carbon-based fluorescent nanomaterials, have garnered significant attention due to their tunable optical properties and functional versatility. In this study, we developed a hybrid material by grafting pH- and temperature-responsive copolymers onto CDs via reversible addition-fragmentation chain-transfer (RAFT) polymerization. Triamino-tetraphenylethylene (ATPE) and N-isopropylacrylamide (NIPAM) were copolymerized at varying ratios and covalently linked to CDs, forming a dual-responsive system. Structural characterization using FTIR, ¹H NMR, and TEM confirmed the successful grafting of the copolymers onto CDs. The hybrid material exhibited pH-dependent fluorescence changes in acidic aqueous solutions, with emission shifting from 450 nm (attributed to CDs) to 500 nm (aggregation-induced emission, AIE, from ATPE) above a critical pH threshold. Solid films of the hybrid material demonstrated reversible fluorescence quenching under HCl vapor and recovery/enhancement under NH₃ vapor, showing excellent fatigue resistance over multiple cycles. Temperature responsiveness was attributed to the thermosensitive poly(NIPAM) segments, with fluorescence intensity increasing above 35 °C due to polymer chain collapse and ATPE aggregation. This work provides a strategy for designing multifunctional hybrid materials with potential applications in recyclable optical pH/temperature sensors. Full article

The increasing prevalence of diabetes mellitus necessitates the development of advanced glucose-monitoring systems that are non-invasive, reliable, and capable of real-time analysis. Wearable electrochemical biosensors have emerged as promising tools for continuous glucose monitoring (CGM), particularly through sweat-based platforms. This review highlights recent advancements in enzymatic and non-enzymatic wearable biosensors, with a specific focus on the pivotal role of nanomaterials in enhancing sensor performance. In enzymatic sensors, nanomaterials serve as high-surface-area supports for glucose oxidase (GOx) immobilization and facilitate direct electron transfer (DET), thereby improving sensitivity, selectivity, and miniaturization. Meanwhile, non-enzymatic sensors leverage metal and metal oxide nanostructures as catalytic sites to mimic enzymatic activity, offering improved stability and durability. Both categories benefit from the integration of carbon-based materials, metal nanoparticles, conductive polymers, and hybrid composites, enabling the development of flexible, skin-compatible biosensing systems with wireless communication capabilities. The review critically evaluates sensor performance parameters, including sensitivity, limit of detection, and linear range. Finally, current limitations and future perspectives are discussed. These include the development of multifunctional sensors, closed-loop therapeutic systems, and strategies for enhancing the stability and cost-efficiency of biosensors for broader clinical adoption. Full article

Over the past two decades, titanium dioxide nanotubes (TiO₂ NTs) have gained considerable attention as multifunctional materials in sensing technologies. Their large surface area, adjustable morphology, chemical stability, and photoactivity have positioned them as promising candidates for diverse sensor applications. This review presents a broad overview of the development of TiO₂ NTs in sensing technologies for medical diagnostics over the last two decades. It further explores strategies for enhancing their sensing capabilities through structural modifications and hybridization with nanomaterials. Despite notable advancements, challenges such as device scalability, long-term operational stability, and fabrication reproducibility remain. This review outlines the evolution of TiO₂ NT-based sensors for medical diagnostics, highlighting both foundational progress and emerging trends, while providing insights into future directions for their practical implementation across scientific and industrial domains. Full article

The rapid development of wearable electronics requires multifunctional, transient electronic devices to reduce the ecological footprint and ensure data security. Unfortunately, existing transient electronic materials need to be degraded in chemical solvents or body fluids. Here, we report green luminescent, water-soluble, and biocompatible piezoelectric nanofibers developed by electrospinning green carbon quantum dots (G-CQDs), mulberry silk fibroin (SF), and polyvinyl alcohol (PVA). The introduction of G-CQDs significantly enhances the piezoelectric output of silk fibroin-based fiber materials. Meanwhile, the silk fibroin-based hybrid fibers maintain the photoluminescent response of G-CQDs without sacrificing valuable biocompatibility. Notably, the piezoelectric output of a G-CQD/PVA/SF fiber-based nanogenerator is more than three times higher than that of a PVA/SF fiber-based nanogenerator. This is one of the highest levels of state-of-the-art piezoelectric devices based on biological organic materials. As a proof of concept, in the actual scenario of a rope skipping exercise, the G-CQD/PVA/SF fiber-based nanogenerator is further employed as a self-powered wearable sensor for real-time sensing of athletic motions. It demonstrates high portability, good flexibility, and stable piezoresponse for smart sports applications. This class of water-disposable, piezo/photoactive biological materials could be compelling building blocks for applications in a new generation of versatile, transient, wearable/implantable devices. Full article

Soft anthropomorphic robotic grippers are attractive because of their inherent compliance, allowing them to adapt to the shape of grasped objects and the overload protection needed for safe human–robot interaction or gripping delicate objects with sophisticated control. The anthropomorphic design allows the gripper to benefit from the biological evolution of the human hand to create a multi-functional robotic end effector. Entirely soft grippers could be more efficient because they yield under high loads. A trending solution is a hybrid gripper combining soft and rigid elements. This work describes a prototype of an anthropomorphic, underactuated five-finger gripper with a direct pneumatic drive from soft bending actuators and an integrated resistive tactile sensor array. It is a hybrid construction with soft robotic structures and rigid skeletal elements, which reinforce the body, focus the direction of the actuator’s movement, and make the finger joints follow the forward kinematics. The hand is equipped with a resistive tactile dielectric elastomer sensor array that directly triggers the hand’s actuation in the sense of reflexes. The hand can execute precision grips with two and three fingers, as well as lateral grip and strong grip types. The softness of the actuation allows the finger to adapt to the shape of the objects. Full article

This study presents the fabrication and characterization of hybrid magneto-responsive composites (hMRCs), composed of recyclable components: magnetite microparticles (MMPs) as fillers, lard as a natural binding matrix, and cotton fabric for structural reinforcement. MMPs are obtained by in-house plasma-synthesis, a sustainable, efficient, and highly tunable method for producing high-performance MMPs. hMRCs are integrated into flat capacitors, and their electrical capacitance (C), resistance (R), dielectric permittivity (${ϵ}^{\prime }$), and electrical conductivity ($\sigma$) are investigated under a static magnetic field, uniform force field, and an alternating electric field. The experimental results reveal that the electrical properties of hMRCs are dependent on the volume fractions of MMPs and microfibers in the fabric, as well as the applied magnetic flux density (B) and compression forces (F). C shows an increase with both B and F, while R decreases due to improved conductive pathways formed by alignment of MMPs. $\sigma$ is found to be highly tunable, with increases of up to 300% under combined field effects. In the same conditions, C increases up to 75%, and R decreases up to 80%. Thus, by employing plasma-synthesized MMPs, and commercially available recyclable lard and cotton fabrics, this study demonstrates an eco-friendly, low-cost approach to designing multifunctional smart materials. The tunable electrical properties of hMRCs open new possibilities for adaptive sensors, energy storage devices, and magnetoelectric transducers. Full article

Conductive hydrogels, integrating high conductivity, mechanical flexibility, and biocompatibility, have emerged as crucial materials driving the evolution of next-generation wearable sensors. Their unique ability to establish seamless interfaces with biological tissues enables real-time acquisition of physiological signals, external stimuli, and even therapeutic feedback, paving the way for intelligent health monitoring and personalized medical interventions. To fully harness their potential, significant efforts have been dedicated to tailoring the conductive networks, mechanical properties, and environmental stability of these hydrogels through rational design and systematic optimization. This review comprehensively summarizes the design strategies of conductive hydrogels, categorized into metal-based, carbon-based, conductive polymer-based, ionic, and hybrid conductive systems. For each type, the review highlights structural design principles, strategies for conductivity enhancement, and approaches to simultaneously enhance mechanical robustness and long-term stability under complex environments. Furthermore, the emerging applications of conductive hydrogels in wearable sensing systems are thoroughly discussed, covering physiological signal monitoring, mechano-responsive sensing platforms, and emerging closed-loop diagnostic–therapeutic systems. Finally, this review identifies key challenges and offers future perspectives to guide the development of multifunctional, intelligent, and scalable conductive hydrogel sensors, accelerating their translation into advanced flexible electronics and smart healthcare technologies. Full article

Humidity sensors are widely utilized in meteorological research, industrial production, precision instrument maintenance, agriculture, health care, and other fields. However, the long response time and low sensitivity of current metal oxide and hybrid humidity sensors limit their practical applications. In this study, a humidity sensor was prepared using a simple drop-casting method with 2-hydroxy-2-methylpropiophenone (HOMPP) and 1-vinyl-3-butylimidazolium bromide (C₉H₁₅BrN₂) as the humidity sensing materials. This approach offers advantages such as low cost, high chemisorption capacity, and excellent moisture-sensitive performance. The prepared humidity sensors demonstrate high sensitivity, good repeatability, excellent flexibility, low hysteresis, and response/recovery times of 6/12.5 s, respectively, over a wide relative humidity (RH) range (2–97%). Additionally, the sensor exhibits potential for various multifunctional applications, including humidity detection in daily life, respiratory monitoring, non-contact sensing, and flexible electronics applications. Full article

Dynamic hydrogels have attracted considerable attention in the application of flexible electronics, as they possess injectable and self-healing abilities. However, it is still a challenge to combine high conductivity and antibacterial properties into dynamic hydrogels. In this work, we fabricated a type of dynamic hydrogel based on acylhydrazone bonds between thermo-responsive copolymer and silver nanoparticles (AgNPs) functionalized with hydrazide groups. The hybrid hydrogels exhibited sol–gel transition, self-healable, injectable and thermo-responsive abilities. The self-healing efficiency was over 92%. Moreover, the hydrogel displayed antimicrobial properties and high conductivity (6.85 S/m). Notably, the fabricated hydrogel-based sensors exhibited strain and temperature sensing (22.05%/°C) and could detect human motion and speech, and electrocardiographic (ECG) and electromyography (EMG) signals. Overall, this work provides a simple strategy to synthesize AgNPs-based dynamic hydrogels with multi-functions, and the hydrogels may find potential applications in antibacterial wearable electronics, health monitoring and speech recognition. Full article

This paper presents the architecture, design, and testing results of a scalable, multi-core, multi-function sensor interface, integrating CMOS technology and memristor elements for efficient neuromorphic and bio-inspired analysis. The architecture leverages the high-density and non-volatile properties of memristors to support different analysis functions. Each processing core is equipped with hybrid CMOS/memristor arrays, enabling real-time parallel acquisition and analysis, and each can be configured independently. The system facilitates communication between cores and is fully scalable. The first implementation supports 16 input channels, storing 256 neural signal samples, and the second implementation supports 576 input channels, storing 9k neural signal samples. Full article

Non-conjugated polymer-derived functional nanocomposites are one of the important ways to develop multifunctional hybrids. By increasing the degree of crosslinking, their photophysical properties can be improved. PbS is a class of narrow bandgap infrared active materials. To avoid aggregation and passivation of the surface defects of PbS nanomaterials, a large number of organic and inorganic ligands are usually used. In this study, PbS/C composite nanosheets were synthesized with Pb²⁺ ion-crosslinked sodium alginate gel by one-pot carbonization. The resulting nanosheets were coated on untreated A4 printing paper, and the electrodes were the graphite electrodes with 5B pencil drawings. The photocurrent signals of the products were measured using typical 650, 808, 980, and 1064 nm light sources. The results showed that the photocurrent switching signals were effectively extracted in the visible and near-infrared regions, which was attributed to the mutual passivation of defects during the in situ preparation of PbS and carbon nanomaterials. At the same time, the resulting nanocomposite exhibited electrical switching responses to the applied strain to a certain extent. The photophysical and defect passivation mechanisms were discussed based on the aggregation state of the carbon hybrid and the interfacial electron interaction. This material would have potential applications in broadband flexible photodetectors, tentacle sensors, or light harvesting interdisciplinary areas. This study provided a facile approach to prepare a low-cost hybrid with external stimulus response and multifunctionality. These results show that the interfacial charge transfer is the direct experimental evidence of interfacial interaction, and the regulation of interfacial interaction can improve the physical and chemical properties of nanocomposites, which can meet the interdisciplinary application. The interdisciplinary and application of more non-conjugated polymer systems in some frontier areas will be expanded upon. Full article