Search Results (238)

Accomplishing China’s national targets of carbon peaking and carbon neutrality necessitates proactive solutions, hinging critically on fundamentally transforming rural construction models. Current construction practices in rural areas are characterized by inefficiency, high resource consumption, and reliance on imported materials. These shortcomings not only jeopardize the attainment of climate objectives, but also hinder equitable development between urban and rural regions. Using the Digital Industrial Park in Yongtai County, Fuzhou City, as a case study, this study focuses on prefabricated public buildings in regions with extreme hot–humid climate, and innovatively integrates BIM (Building Information Modeling)-driven carbon modeling with the Gaussian Two-Step Floating Catchment Area (G2SFCA) method for spatial accessibility assessment to investigate the carbon emissions and economic benefits of prefabricated buildings during the embodied stage, and analyzes the spatial accessibility of prefabricated building material suppliers in Fuzhou City and identifies associated bottlenecks, seeking pathways to promote sustainable rural revitalization. Compared with traditional cast-in-situ buildings, embodied carbon emissions of prefabricated during their materialization phase significantly reduced. This dual-perspective approach ensures that the proposed solutions possess both technical rigor and logistical feasibility. Promoting this model across rural areas sharing similar climatic conditions would advance the construction industry’s progress towards the dual carbon goals. Full article

Background: Arthropod-borne diseases primarily affect tropical and subtropical regions, exhibiting seasonal patterns that peak during hot and rainy months when conditions favor mosquito vector proliferation. Factors such as high temperatures, elevated humidity, rainfall, urbanization, and the abundance of natural and artificial breeding sites influence Aedes vector dynamics. In this context, arboviruses pose significant public health challenges, likely worsened by global warming. In Brazil, Aedes (Stegomyia) aegypti (Linnaeus, 1762) is the primary vector for yellow fever, dengue, chikungunya, and Zika. Aedes (Stegomyia) albopictus (Skuse, 1894) is an important global arbovirus vector and is considered a potential vector in Brazil. Entomological surveillance of these species often uses oviposition traps targeting immature stages. Evaluating studies that use ovitraps to collect Ae. aegypti and Ae. albopictus egg is essential for improving mosquito surveillance strategies. This study systematically reviewed peer-reviewed articles on ovitrap-based surveillance of Aedes mosquitoes in Brazil, published in Portuguese and English from 2012 to 2022. The findings suggest that ovitraps are an effective method for detecting the presence or absence of Ae. aegypti and Ae. albopictus, serving as a reliable proxy for estimating mosquito abundance in Brazilian contexts. Full article

Creating a comfortable microclimate in the premises of buildings is currently becoming one of the priorities in the field of architecture, construction and engineering systems. The increased attention from the scientific community to this topic is due not only to the desire to ensure healthy and favorable conditions for human life but also to the need for the rational use of energy resources. This area is becoming particularly relevant in the context of global challenges related to climate change, rising energy costs and increased environmental requirements. Practice shows that any technical solutions to ensure comfortable temperature, humidity and air exchange in rooms should be closely linked to the concept of energy efficiency. This allows one not only to reduce operating costs but also to significantly reduce greenhouse gas emissions, thereby contributing to sustainable development and environmental safety. In this connection, this study presents a parametric assessment of the influence of climatic and geometric factors on the aerodynamic characteristics of the air cavity, which affect the heat exchange process in the ventilated layer of curtain wall systems. The assessment was carried out using a combined analytical calculation method that provides averaged thermophysical parameters, such as mean air velocity ($V_s$), average internal surface temperature ($t_{in.s}^{av}$), and convective heat transfer coefficient (${\alpha }_s$) within the air cavity. This study resulted in empirical average values, demonstrating that the air velocity within the cavity significantly depends on atmospheric pressure and façade height difference. For instance, a 10-fold increase in façade height leads to a 4.4-fold increase in air velocity. Furthermore, a three-fold variation in local resistance coefficients results in up to a two-fold change in airflow velocity. The cavity thickness, depending on atmospheric pressure, was also found to affect airflow velocity by up to 25%. Similar patterns were observed under ambient temperatures of +20 °C, +30 °C, and +40 °C. The analysis confirmed that airflow velocity is directly affected by cavity height, while the impact of solar radiation is negligible. However, based on the outcomes of the analytical model, it was concluded that the method does not adequately account for the effects of solar radiation and vertical temperature gradients on airflow within ventilated façades. This highlights the need for further full-scale experimental investigations under hot climate conditions in South Kazakhstan. The findings are expected to be applicable internationally to regions with comparable climatic characteristics. Ultimately, a correct understanding of thermophysical processes in such structures will support the advancement of trends such as Lightweight Design, Functionally Graded Design, and Value Engineering in the development of curtain wall systems, through the optimized selection of façade configurations, accounting for temperature loads under specific climatic and design conditions. Full article

Residential and agricultural buildings must prioritize environmental sustainability, employing locally sourced, bio/geologically sustainable materials, and reversible construction methods. Hence, adobe construction and earth-based building methods are experiencing a comeback. This article describes the hygrothermal performances of a real scale agricultural building prototype, in real field conditions, built and designed to be energy-efficient, environmentally friendly, and well-suited for the hot, dry climates typical of the Mediterranean region during summer. The building prototype is a small modular two room construction, one room based on wood (for control purpose) and the other one on raw earth. The experimental set up highlights the passive cooling and humidity regulation potential provided by raw earth and adobe brick technology in agricultural buildings used for fruit and vegetable storage. Such passive cooling alternatives in the Mediterranean climate could reduce the need for energy-intensive and environmentally impactful cold storage rooms. Full article

Driven by the global energy transition and China’s dual-carbon targets, Passive ultra-low-energy buildings are a key route for carbon reduction in the construction sector. This study addresses the high energy demand of office buildings and the limited suitability of current efficiency codes in the hot-summer/cold-winter, high-humidity zone of central and southern Anhui. Using multi-year climate records and energy-use surveys from five cities and one scenic area (2013–2024), we systematically investigate climate-adaptive passive-design strategies. Climate-Consultant simulations identify composite envelopes, external shading, and natural ventilation as the three most effective measures. Empirical evidence confirms that optimized envelope thermal properties significantly curb heating and cooling loads; a Huangshan office-building case validates the performance of the proposed passive measures, while analysis of a near-zero-energy demonstration project in Chuzhou yields a coordinated insulation-and-heat-rejection scheme. The results demonstrate that region-specific passive design can provide a comprehensive technical framework for ultra-low-energy buildings in transitional climates and thereby supporting China’s carbon-neutrality targets. Full article

The Lower–Middle Jurassic of the Kuqa Depression consists of terrestrial clastic deposits containing coal seams and thick lacustrine mudstones, and is of great significance for oil and gas exploration. Based on the comprehensive analysis of core, well-logging, outcrop, and seismic data, the sequence stratigraphy, depositional systems, and the controlling factors of the basin filling in the depression are systematically documented. Four primary depositional systems, including braided river delta, meandering river delta, lacustrine, and swamp deposits, are identified within the Ahe, Yangxia, and Kezilenuer Formations of the Lower–Middle Jurassic. The basin fills can be classified into two second-order and nine third-order sequences (SQ1–SQ9) confined by regional or local unconformities and their correlative conformities. This study shows that the sedimentary evolution has undergone the following three stages: Stage I (SQ1–SQ2) primarily developed braided river, braided river delta, and shallow lacustrine deposits; Stage II (SQ3–SQ5) primarily developed meandering river, meandering river delta, and extensive deep and semi-deep lacustrine deposits; Stage III (SQ6–SQ9) primarily developed swamp (SQ6–SQ7), meandering river delta, and shore–shallow lacustrine deposits (SQ8–SQ9). The uplift of the Tianshan Orogenic Belt in the Early Jurassic (Stage I) may have facilitated the development of braided fluvial–deltaic deposits. The subsequential expansion of the sedimentary area and the weakened sediment supply can be attributed to the planation of the source area and widespread basin subsidence, with the transition of the depositional environments from braided river delta deposits to meandering river delta and swamp deposits. The regional expansion or rise of the lake during Stage II was likely triggered by the hot and humid climate conditions, possibly associated with the Early Jurassic Toarcian Oceanic Anoxic Event. The thick swamp deposits formed during Stage III may be controlled by the interplay of rational accommodation, warm and humid climatic conditions, and limited sediment supply. Milankovitch cycles identified in Stage III further reveal that coal accumulation was primarily modulated by long-period eccentricity forcing. Full article

Background: The Lingnan region is characterized by a hot and humid climate and abundant, diverse natural resources, while the Central Plains region experiences distinct four seasons and has a rich agricultural culture. Both regions possess unique dietary traditions and preferences. This study aims to investigate the differences in dietary structure between the Lingnan region (Guangdong, Guangxi, Hainan) and the Central Plains region (Shanxi, Shaanxi, Henan) and their impact on health. Methods: Using cross-sectional survey data from the 2015–2017 China National Nutrition and Health Survey, this study selected residents aged 18 and above as the research subjects. Generalized linear models were employed to analyze differences in the intake of various food groups between the two regions, while logistic regression models were used to examine regional differences in the prevalence of obesity, hypertension, diabetes mellitus, and hyperlipidemia. Results: A total of 14,484 adults were included in this study. Lingnan participants consumed significantly more rice products, red meat, poultry, seafood, and dark-colored vegetables, while Central Plains residents had higher intakes of wheat products, other cereals, soybeans, and eggs. Lingnan exhibited lower prevalence rates of obesity (8.6% vs. 18.1%), diabetes (7.6% vs. 9.8%), and hypertension (33.0% vs. 46.9%) compared to the Central Plains, with no significant difference in hyperlipidemia prevalence. Adjusted analyses confirmed that Lingnan residents had significantly reduced risks of obesity (OR = 0.431, 95% CI: 0.388–0.479), diabetes mellitus (OR = 0.841, 95% CI: 0.744–0.950), and hypertension (OR = 0.564, 95% CI: 0.523–0.608). Conclusions: The dietary structure in the Lingnan region plays a positive role in cardiometabolic health. Further analysis of the combined effects of different foods on health could provide a scientific basis for future nutrition and health management. Full article

The eastern Junggar Basin in Xinjiang, China is a key coal-bearing region dominated by the Middle Jurassic Xishanyao Formation. Despite its significance as a major coal resource base, detailed paleoenvironmental reconstructions of its coal seams remain limited. This study investigates the B₁, B₂, B₃, and B₅ coal seams of the Xishanyao Formation using X-ray fluorescence spectroscopy (XRF) and inductively coupled plasma mass spectrometry (ICP-MS) to assess geochemical indicators of the depositional environment during coal formation. The results show that the coal samples are characterized by high inertinite content and low vitrinite reflectance, indicative of low-rank coal. Slight enrichment of strontium (Sr) was observed in the B₁, B₂, and B₅ seams, while cobalt (Co) showed minor enrichment in B₃. Redox-sensitive elemental ratios (Ni/Co, V/Cr, and Mo) suggest that the peat-forming environment ranged from oxidizing to dysoxic conditions, with relatively high oxygen availability and strong hydrodynamic activity. A vertical trend of increasing paleosalinity and a shift from warm–humid to dry–hot paleoclimatic conditions was identified from the lower (B₁) to upper (B₅) coal seams. Additionally, the estimated atmospheric oxygen concentration during the Middle Jurassic was approximately 28.4%, well above the threshold for wildfire combustion. These findings provide new insights into the paleoenvironmental evolution of the Xishanyao Formation and offer a valuable geochemical framework for coal exploration and the assessment of coal-associated mineral resources in the eastern Junggar Basin. Full article

This study focuses on how modern architecture can be interpreted using regional data and how hot and humid climate data ultimately affect façade design. Despite modernism’s dominance in 20th-century architecture, research on its adaptation to climates remains limited. Five educational buildings of modern architectural style in Adana, Türkiye, a city with a hot–humid climate, were selected for detailed analysis. These buildings were evaluated based on key façade parameters such as opening configurations and solar shading elements. Additionally, thermal imaging, sun-path diagram simulation, and thermal comfort evaluations were conducted to assess façade performance. The findings suggest that contrary to criticisms of modern architecture’s disregard for local conditions, the studied buildings integrate climate-responsive design strategies. In contrast to contemporary architecture’s reliance on technical equipment for thermal comfort, this study also demonstrates that passive design strategies and structural decisions can offer effective alternatives in hot and humid climates. Full article

Buildings account for a significant portion of global energy consumption and are increasingly vulnerable to the adverse effects of climate change, including rising greenhouse gas emissions and shifting weather patterns. These disruptions significantly impact energy demand, necessitating proactive measures to ensure buildings remain functional, sustainable, and energy efficient. This study offers a novel contribution by systematically comparing the energy performance of office building prototypes using a simulation-based method across all U.S. climate zones under projected Representative Concentration Pathways (RCPs) 4.5 (moderate emissions) and 8.5 (high emissions) for the years 2050 and 2080. This multi-scale and multi-scenario simulation provides a nationally comprehensive view of how building size and climate conditions interact to influence vulnerability to future energy demand shifts. The findings reveal that medium-sized office buildings are the most vulnerable to climate change, with an average Energy Unit Intensity (EUI) increase of 12.5% by 2080 under RCP 8.5, compared to a 7.4% rise for large office buildings and a slight decline of 2.5% for small office buildings. Hot and humid cities such as Miami, FL, experience the highest increases, with EUI projected to rise by 21.2% for medium offices, while colder regions like Fairbanks, AK, show reductions of up to 18.2% due to decreasing heating demands. These results underscore the urgent need for climate-compatible building design strategies, particularly in high-risk areas. As climate change intensifies, integrating resilience-focused policies will safeguard energy systems and ensure long-term occupant comfort. Full article

The buffalo species (Bubalus bubalis) is crucial for the global economy, supplying high-nutritional-value animal proteins vital for children’s growth. These animals efficiently convert fiber into energy and thrive in various harsh environments, from frigid climates to hot, humid areas, including wetlands. They produce milk and meat while supporting the sustainability of ecosystems that other ruminants cannot inhabit. Buffalo offers a unique opportunity to supply resources for both rural communities and larger farms located in specific regions, such as marshlands and humid savannahs. They also thrive on extensive pastures and family farms, thus preserving biodiversity, habitats, and cultural practices. Intensive farming brings distinct challenges and is often criticized for its negative effects on climate change. To counter these impacts, multiple strategies have been researched and implemented. These include enhancing livestock genetics, adopting sustainable agricultural practices, optimizing local feed resources (including by-products), managing manure (with an emphasis on renewable energy), and improving animal health and welfare. This review explores various buffalo farming system applications in different global contexts. It is based on the hypothesis that the adaptable traits of buffalo, as well as the environmental and economic challenges that must be addressed for sustainability, are the key factors in determining the viability of such enterprises. Full article

Enclosed courtyards with partially ground floor pilotis represent a prevalent architectural spatial configuration in hot-humid regions, where the shaded outdoor areas serve as frequently utilized spaces for heat avoidance and rest. This study employed a combined approach of ENVI-met simulations and field measurements to investigate the wind and thermal environment in the shaded areas of courtyards under 40 different pilotis width configurations. The Comfortable Wind Zone Ratio (CWZR) and Physiological Equivalent Temperature (PET) were used as primary evaluation metrics to systematically investigate the influence of varying inlet/outlet width ratios in building pilotis on the wind-thermal environment within courtyard-shaded zones. The results demonstrate that: (1) Under a fixed outlet size, enlarging the inlet significantly enhances the CWZR in the shaded area, with a 28.66% difference observed between inlet sizes of L/4 and L. In contrast, under a fixed inlet size, expanding the outlet has a negligible effect on CWZR improvement. (2) Under a fixed outlet size, increasing the inlet width substantially reduces PET in the shaded zone, showing a 2.46 °C difference between inlet sizes of L/4 and L. Conversely, under a fixed inlet size, widening the outlet has a minimal impact on PET reduction. (3) A negative correlation exists between CWZR and PET in the shaded area, indicating that an increase in CWZR leads to a decrease in PET values. The findings provide bioclimatically quantified guidelines for the spatial design of courtyard pilotis in hot-humid regions, offering practical insights for optimizing thermal comfort in shaded outdoor environments. Full article

This study aims to optimize indoor thermal environment assessment methods for primary school classrooms in regions with hot summers and cold winters, enhancing air-conditioning management efficiency and accuracy. Given the complexity of Predicted Mean Vote (PMV) calculations and its reduced accuracy under high temperature and humidity, this research explores the use of Thermal Sensation Vote (TSV) as a simpler alternative. Field measurements and subjective assessments were conducted to analyze the relationship between TSV and PMV, leading to a regression model linking predicted TSV (TSV_p) with temperature and humidity. Results indicate that temperature and humidity significantly impact TSV, with regression coefficients of 0.499 and 0.055, respectively. Furthermore, when TSV is ≥1, the proportion of PMV of ≥0.5 remains stable, validating TSV_p as a reliable indicator. Based on these findings, energy-efficient air-conditioning management strategies are proposed, recommending a temperature setting of 28 °C for thermal comfort. This study provides insights into climate control strategies in educational buildings, promoting sustainable development. Full article

This study focuses on assessing the physical growth of cities and the land-cover changes resulting from it, which play a crucial role in understanding the environmental impacts and managing phenomena such as the Daytime Urban Surface Heat Island Intensity (DSUHII). Predicting the trends of these changes for the future provides valuable insights for urban planning and mitigating thermal effects in arid environments. This research aims to evaluate the spatial and temporal changes in the intensity of urban surface heat islands in cities under different climatic conditions, resulting from land-cover changes in the past, and to predict future trends. For this purpose, Landsat satellite data products, including Surface Reflectance with a 30-m resolution and Land Surface Temperature (LST) originally at a 100 (120)-meter resolution for Landsat 8 (Landsat 5) (resampled to 30 m for compatibility), along with a database of underlying criteria affecting urban growth, were used to analyze land-cover and LST changes. The land-cover classification was carried out using the Support Vector Machine (SVM) algorithm, and its accuracy was assessed. Spatial and temporal changes in LST and land-cover classes were quantified using cross-tabulation models and subtraction operators. Subsequently, the impact of land-cover changes on LST in different climates was analyzed, and the trends of land-cover and DUSHII changes were simulated for the future using the CA–Markov model. The results showed that in the humid climate (Babol and Rasht), built-up areas increased by over 100% from 1990 to 2023 and are projected to grow further by 2055, while green spaces significantly decreased. In the cold–dry climate (Mashhad), urban development increased dramatically, and green spaces nearly halved. In the hot–dry climate (Yazd and Kerman), built-up areas tripled, and the reduction of green spaces will continue. Additionally, in cities with hot and dry climates, a significant area of barren land was converted into built-up areas, and this trend is predicted to continue in the future. DSUHII in Babol increased from 2.5 °C in 1990 to 5.4 °C in 2023 and is projected to rise to 7.8 °C by 2055. In Rasht, this value increased from 2.9 °C to 5.5 °C, and is expected to reach 7.6 °C. In Mashhad, the DSUHII was negative, decreasing from −1.1 °C in 1990 to −1.5 °C in 2023, and is projected to decline to −1.9 °C by 2055. In Yazd, DSUHII also remained negative, decreasing from −2.5 °C in 1990 to −3.3 °C in 2023, with an expected drop to −6.4 °C by 2055. Similarly, in Kerman, the intensity of DSUHII decreased from −2.8 °C to −5.1 °C, and it is expected to reach −7.1 °C by 2055. Overall, the conclusions highlight that in humid climates, DSUHII has significantly increased, while green spaces have decreased. In moderate, cold, and dry climates, a gradual reduction in DSUHII is observed. In the hot–dry climate, the most substantial decrease in DSUHII is evident, indicating the varying impacts of land-cover changes on DSUHII across these regions. Full article

With the intensification of global climate change, buildings in hot climate zones face increasing challenges related to high energy consumption and thermal comfort. Building integrated photovoltaic (BIPV) façades, which combine power generation and energy saving potential, require further optimization in their climate-adaptive design. Most existing studies primarily focus on the photoelectric conversion efficiency of PV modules, yet there is a lack of systematic analysis of the coupled effects of temperature, humidity, and solar radiation intensity on PV performance. Moreover, the current literature rarely addresses the regional material degradation patterns, integrated cooling solutions, or intelligent control systems suitable for hot and humid climates. There is also a lack of practical, climate specific design guidelines that connect theoretical technologies with real world applications. This paper systematically reviews BIPV façade design strategies following a climate zoning framework, summarizing research progress from 2019 to 2025 in the areas of material innovation, thermal management, light regulation strategies, and parametric design. A climate responsive strategy is proposed to address the distinct challenges of humid hot and dry hot climates. Finally, this study discusses the barriers and challenges of BIPV system applications in hot climates and highlights future research directions. Unlike previous reviews, this paper offers a multi-dimensional synthesis that integrates climatic classification, material suitability, passive and active cooling strategies, and intelligent optimization technologies. It further provides regionally differentiated recommendations for façade design and outlines a unified framework to guide future research and practical deployment of BIPV systems in hot climates. Full article