Search Results (23)

The most organic-rich shales are defined in the Dobele Fm. of the Aeronian Stage of about 10 m thick in west Lithuania. This particular layer is documented in the whole Baltic Basin. Compatible shales are widely distributed in other basins referred to as similar Silurian “hot” shales. The average TOC was estimated at 6.67 wt.% (good and excellent source rock). The thermal maturity of shales was evaluated through organic geochemical techniques, including TOC determination, Rock–Eval pyrolysis, and organic petrography studies. The thermal maturity varies from T_max = 431 °C and eq.VR_o = 0.65% (early oil) to T_max = 468 °C and VR_o = 1.38% (locally up to 1.94%) (late oil and wet to dry gas generation). It is notable, most of the study area is confined to regional-scale West Lithuanian Geothermal Anomaly. Most of the geothermal features, both palaeo- and recent, recorded in lateral variation in thermal maturity of shales unravel persistence of heat flow. Locally, the Variscan tectonic activity was imprinted in thermal maturity of organic matter-rich shales (Žemaičių Naumiestis anomaly). Full article

Being an essential issue in global climate warming, the response of urban green spaces to air pollution and climate variability because of rapid urbanization has become an increasing concern at both the local and global levels. This study explored the response of urban vegetation to air pollution and climate variability in the Bucharest metropolis in Romania from a spatiotemporal perspective during 2000–2024, with a focus on the 2020–2024 period. Through the synergy of time series in situ air pollution and climate data, and derived vegetation biophysical variables from MODIS Terra/Aqua satellite data, this study applied statistical regression, correlation, and linear trend analysis to assess linear relationships between variables and their pairwise associations. Green spaces were measured with the MODIS normalized difference vegetation index (NDVI), leaf area index (LAI), photosynthetically active radiation (FPAR), evapotranspiration (ET), and net primary production (NPP), which capture the complex characteristics of urban vegetation systems (gardens, street trees, parks, and forests), periurban forests, and agricultural areas. For both the Bucharest center (6.5 km × 6.5 km) and metropolitan (40.5 km × 40.5 km) test areas, during the five-year investigated period, this study found negative correlations of the NDVI with ground-level concentrations of particulate matter in two size fractions, PM2.5 (city center r = −0.29; p < 0.01, and metropolitan r = −0.39; p < 0.01) and PM10 (city center r = −0.58; p < 0.01, and metropolitan r = −0.56; p < 0.01), as well as between the NDVI and gaseous air pollutants (nitrogen dioxide—NO₂, sulfur dioxide—SO₂, and carbon monoxide—CO. Also, negative correlations between NDVI and climate parameters, air relative humidity (RH), and land surface albedo (LSA) were observed. These results show the potential of urban green to improve air quality through air pollutant deposition, retention, and alteration of vegetation health, particularly during dry seasons and hot summers. For the same period of analysis, positive correlations between the NDVI and solar surface irradiance (SI) and planetary boundary layer height (PBL) were recorded. Because of the summer season’s (June–August) increase in ground-level ozone, significant negative correlations with the NDVI (r = −0.51, p < 0.01) were found for Bucharest city center and (r = −76; p < 0.01) for the metropolitan area, which may explain the degraded or devitalized vegetation under high ozone levels. Also, during hot summer seasons in the 2020–2024 period, this research reported negative correlations between air temperature at 2 m height (TA) and the NDVI for both the Bucharest city center (r = −0.84; p < 0.01) and metropolitan scale (r = −0.90; p < 0.01), as well as negative correlations between the land surface temperature (LST) and the NDVI for Bucharest (city center r = −0.29; p< 0.01) and the metropolitan area (r = −0.68, p < 0.01). During summer seasons, positive correlations between ET and climate parameters TA (r = 0.91; p < 0.01), SI (r = 0.91; p < 0.01), relative humidity RH (r = 0.65; p < 0.01), and NDVI (r = 0.83; p < 0.01) are associated with the cooling effects of urban vegetation, showing that a higher vegetation density is associated with lower air and land surface temperatures. The negative correlation between ET and LST (r = −0.92; p < 0.01) explains the imprint of evapotranspiration in the diurnal variations of LST in contrast with TA. The decreasing trend of NPP over 24 years highlighted the feedback response of vegetation to air pollution and climate warming. For future green cities, the results of this study contribute to the development of advanced strategies for urban vegetation protection and better mitigation of air quality under an increased frequency of extreme climate events. Full article

Spectropolarimetric techniques are a mainstay of astrophysical inquiry, ranging from Solar System objects to the Cosmic Background Radiation. This review highlights applications of stellar polarimetry for massive hot stars, particularly in the context of ultraviolet (UV) spaceborne missions. The prevalence of binarity in the massive star population and uncertainties regarding the degree of rotational criticality among hot stars raises important questions about stellar interactions, interior structure, and even the lifetimes of evolutionary phases. These uncertainties have consequences for stellar population synthesis calculations. Spectropolarimetry is a key tool for extracting information about stellar and binary geometries. We review methodologies involving electron scattering in circumstellar envelopes; gravity darkening from rapid rotation; spectral line effects, including the (a) “line effect”, (b) Öhman effect, and (c) Hanle effect; and the imprint of interstellar polarization on measurements. Finally, we describe the Polstar UV spectropolarimetric SMEX mission concept as one means for employing these diagnostics to clarify the state of high rotation and its impacts for massive stars. Full article

The increasing occurrence of hot summer days causes stress to both humans and animals, particularly in urban areas where temperatures can remain high, even at night. Living nature offers potential solutions that require minimal energy and material costs. For instance, the Saharan silver ant (Cataglyphis bombycina) can endure the desert heat by means of passive radiative cooling induced by its triangular hairs. The objective of this study is to transfer the passive radiative cooling properties of the micro- and nanostructured chitin hairs of the silver ant body to technically usable, biodegradable and bio-based materials. The potential large-scale transfer of radiative cooling properties, for example, onto building exteriors such as house facades, could decrease the need for conventional cooling and, therefore, lower the energy demand. Chitosan, a chemically altered form of chitin, has a range of medical uses but can also be processed into a paper-like film. The procedure consists of dissolving chitosan in diluted acetic acid and uniformly distributing it on a flat surface. A functional structure can then be imprinted onto this film while it is drying. This study reports the successful transfer of the microstructure-based structural colors of a compact disc (CD) onto the film. Similarly, a polyvinyl siloxane imprint of the silver ant body shall make it possible to transfer cooling functionality to technically relevant surfaces. FTIR spectroscopy measurements of the reflectance of flat and structured chitosan films allow for a qualitative assessment of the infrared emissivity. A minor decrease in reflectance in a relevant wavelength range gives an indication that it is feasible to increase the emissivity and, therefore, decrease the surface temperature purely through surface-induced functionalities. Full article

Paper-based test strips with on-site visual detection have become a hot spot in the field of target detection. Yet, low specific surface area and uneven deposition limit the further application of test strips. Herein, a novel “turn-on” ratio of molecularly imprinted membranes (Eu@CDs-MIMs) was successfully prepared based on a Eu complex-doped polyvinylidene fluoride membrane for the selective, rapid and on-site visual detection of norfloxacin (NOR). The formation of surface-imprinted polymer-containing carbon dots (CDs) improves the roughness and hydrophilicity of Eu@CDs-MIMs. Fluorescence lifetimes and UV absorption spectra verified that the fluorescence enhancement of CDs is based on the synergistic effect of charge transfer and hydrogen bonding between CDs and NOR. The fluorescent test strip showed a linear fluorescent response within the concentration range of 5–50 nM with a limit of detection of 1.35 nM and a short response time of 1 min. In comparison with filter paper-based test strips, Eu@CDs-MIMs exhibit a brighter and more uniform fluorescent color change from red to blue that is visible to the naked eye. Additionally, the applied ratio fluorescent test strip was combined with a smartphone to translate RGB values into concentrations for the visual and quantitative detection of NOR and verified the detection results using high-performance liquid chromatography. The portable fluorescent test strip provides a reliable approach for the rapid, visual, and on-site detection of NOR and quinolones. Full article

As a technology for polymer surface fabrication, roll-to-roll hot embossing has been widely used because of its advantages, such as its low cost and high efficiency. However, the metal micro-mold is a major factor that determines the hot embossing of the polymer. In this study, a new metal micro-mold manufacturing method is proposed. The metal micro-mold is produced using laser shock imprinting (LSI) on the surface of metal foil. It has the characteristics of good thermal stability and high strength. During our LSI experiment, the strength of the mold increased after laser shocking. In this study, copper foils of different thicknesses were selected for LSI experiments. Through the analysis of the profile and forming depth of the microstructure, combined with the numerical simulation of the forming mechanism of copper foils with different thicknesses using ABAQUS software(Abaqus 2021), a copper foil with a flat back was selected as the final metal micro-mold. On this basis, copper molds with different microstructure shapes were created. Then, the mold was used in the hot-embossing experiment to manufacture the microstructure on the surface of polyethylene terephthalate (PET) and to study the fidelity and integrity of the molded microstructure. The deformation resistance of the copper mold under hot-embossing conditions was verified through a nano-indentation experiment. The final results show that the metal micro-mold produced via LSI had a high accuracy and molding stability and has potential applications in the field of roll-to-roll hot embossing. Full article

The accurate detection of biological substances such as proteins has always been a hot topic in scientific research. Biomimetic sensors seek to imitate sensitive and selective mechanisms of biological systems and integrate these traits into applicable sensing platforms. Molecular imprinting technology has been extensively practiced in many domains, where it can produce various molecular recognition materials with specific recognition capabilities. Molecularly imprinted polymers (MIPs), dubbed plastic antibodies, are artificial receptors with high-affinity binding sites for a particular molecule or compound. MIPs for protein recognition are expected to have high affinity via numerous interactions between polymer matrices and multiple functional groups of the target protein. This critical review briefly describes recent advances in the synthesis, characterization, and application of MIP-based sensor platforms used to detect proteins. Full article

To this day, the preparation of surface-enhanced Raman spectroscopy (SERS) substrates with high sensitivity, selectivity, and stability has been the bottleneck to realizing SERS-based quantitative analysis in practical applications. In this paper, a thermo-sensitive imprinting SERS substrate material (TM@TiO₂@Ag) is developed with a uniform structure and morphology, a controllable “hot spot” and photocatalytic regeneration. The as-prepared TM@TiO₂@Ag nanocomposite is characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, dynamic light scattering, ultraviolet–visible (UV-Vis) spectroscopy, etc. After the effects of its thermo-sensitive property on localized surface plasmon resonance (LSPR) and SERS signals are investigated, this nanomaterial is used as the Raman-enhanced substrate for rapid and trace detection of ofloxacin (OFL) in water. It is found that, with the aid of unique structure and composition, temperature sensitivity, and molecule imprinting, the SERS sensor possesses considerably strong anti-interference ability not only to structure-unlike but also to structure-like co-existing substances, extremely low detectable concentration of 1.1 × 10⁻¹¹ M for OFL at 1397 cm⁻¹, as well as excellent reusability due to its photocatalytic degradation to target analytes. Full article

Nowadays, the demand for surface functionalized plastics is constantly rising. To address this demand with an industry compatible solution, here a strategy is developed for producing hierarchical microstructures on polyethylene terephthalate (PET) by hot embossing using a stainless steel stamp. The master was structured using three laser-based processing steps. First, a nanosecond-Direct Laser Writing (DLW) system was used to pattern dimples with a depth of up to 8 µm. Next, the surface was smoothed by a remelting process with a high-speed laser scanning at low laser fluence. In the third step, Direct Laser Interference Patterning (DLIP) was utilized using four interfering sub-beams to texture a hole-like substructure with a spatial period of 3.1 µm and a depth up to 2 µm. The produced stamp was used to imprint PET foils under controlled temperature and pressure. Optical confocal microscopy and scanning electron microscopy imaging showed that the hierarchical textures could be accurately transferred to the polymer. Finally, the wettability of the single- and multi-scaled textured PET surfaces was characterized with a drop shape analyzer, revealing that the highest water contact angles were reached for the hierarchical patterns. Particularly, this angle was increased from 77° on the untreated PET up to 105° for a hierarchical structure processed with a DLW spot distance of 60 µm and with 10 pulses for the DLIP treatment. Full article

Toxemia of pregnancy is a very dangerous disease for pregnant women. The mortality rate of toxemia of pregnancy is close to 10% to 15%. Early detection of pregnancy toxemia is to monitoring uric acid concentration in urine. The current mainstream method for detecting uric acid requires an enzyme (urate oxidase), which needs to be stored in a low-temperature environment, and the method requires complex chemical steps, which takes a longer time and more samples. In this study, we propose an integrated miniature three-electrode electrochemical surface-enhanced Raman spectroscopy chip (EC-SERS chip) suitable for rapid EC-SERS detection applications. The integrated microfluidic reservoir on the chip makes it easy to use, which is very suitable for rapid detection applications. The SERS active working electrode for the proposed integrated EC-SERS chip is a nanocone array polycarbonate (PC) substrate decorated with an evenly distributed and tightly packed array of gold nanospheres. It showed good uniformity and can be easily reproduced. The integrated EC-SERS chip is very small compared to the traditional electrochemical cell, which reduces the sample volume required for the testing. In addition, the chip is for one-time use only. It eliminates the need to clean electrochemical cells for reuse, thereby reducing the possibility of contamination and inaccurate detection. Various low-concentration Rhodamine 6G (R6G) solutions were tested to verify the performance of the developed EC-SERS chip. Experimental results showed that the proposed EC-SERS chip has a strong enhancement factor of up to 8.5 × 10⁶ and a very good EC-SERS uniformity (the relative standard deviation of EC-SERS intensity is as low as 1.41%). The EC-SERS chip developed has been further tested for the detection of uric acid in synthetic urine. The results showed that the EC-SERS signal intensity has a highly linear relationship with the logarithm of the uric acid concentration in synthetic urine, which indicates that the developed EC-SERS chip is suitable for the quantitative detection of uric acid in synthetic urine. Therefore, the developed EC-SERS chip is very promising to be used in routine and early diagnosis of pregnancy toxemia and may be used in many other medical tests, food safety, and biotechnology applications. Full article

Detection and monitoring of volatiles is a challenging and fascinating issue in environmental analysis, agriculture and food quality, process control in industry, as well as in ‘point of care’ diagnostics. Gas chromatographic approaches remain the reference method for the analysis of volatile organic compounds (VOCs); however, gas sensors (GSs), with their advantages of low cost and no or very little sample preparation, have become a reality. Gas sensors can be used singularly or in array format (e.g., e-noses); coupling data output with multivariate statical treatment allows un-target analysis of samples headspace. Within this frame, the use of new binding elements as recognition/interaction elements in gas sensing is a challenging hot-topic that allowed unexpected advancement. In this review, the latest development of gas sensors and gas sensor arrays, realized using peptides, molecularly imprinted polymers and DNA is reported. This work is focused on the description of the strategies used for the GSs development, the sensing elements function, the sensors array set-up, and the application in real cases. Full article

Hot embossing is in the spotlight due to the development of electronic devices, wearable devices, microfluidic channels, and optical devices. The conventional hot-embossing process creates a pattern on polymer film by using a previously patterned stamp that applied heat and pressure. This method has a disadvantage because it depends on the shape of the patterned stamp. For this reason, this method requires a high cost and a lot of time when replacing the stamp for making a new pattern shape or for modifying the error of the pattern. To solve this problem, the impact print-type hot-embossing method was proposed to create arbitrary patterns, and equipment for this method was assembled. In addition, patterning experiments were conducted to imprint several tens of micrometer-sized patterns in real time. For this method, we proposed an electromagnetic actuator for making the hot-embossing print type and for reducing the size of the actuator compared to previous studies. Through the patterning experiment, we determined that the proposed device could engrave fine dot patterns ranging from 60 μm to 120 μm in diameter. We verified the size of the generated pattern by using a confocal microscope, and we found the proposed hot-embossing technology can realize the desired shape in any position by using the proposed technique. Full article

Hepatocellular carcinoma (HCC), the most common primary liver cancer, is challenging to treat due to its typical late diagnosis, mostly at an advanced stage. Therefore, there is a particular need for research in diagnostic and prognostic biomarkers and therapeutic targets for HCC. The use of long noncoding (lnc) RNAs can widen the list of novel molecular targets improving cancer therapy. In hepatocarcinogenesis, the role of the lncRNA H19, which has been known for more than 30 years now, is still controversially discussed. H19 was described to work either as a tumor suppressor in vitro and in vivo, or to have oncogenic features. This review attempts to survey the conflicting study results and tries to elucidate the potential reasons for the contrary findings, i.e., different methods, models, or readout parameters. This review encompasses in vitro and in vivo models as well as studies on human patient samples. Although the function of H19 in HCC remains elusive, a short outlook summarizes some ideas of using the H19 locus as a novel target for liver cancer therapy. Full article

High-purity solanesol can be used for pharmaceutical applications, but the current method for purifying solanesol has high cost and difficult continuous operation, and the use of molecular imprinting to purify natural products is a hot research topic of current research. Solanesol molecularly imprinted polymers were synthesized via emulsion polymerization for the first time. The morphology of the SSO-MIPs was observed with a scanning electron microscope, and the effects of the synthesis time, initiator dosage, functional monomer dosage, and cross-linking agent dosage on the adsorption effects under high-temperature and rapid synthesis conditions were discussed. The results demonstrate that the optimum synthesis conditions were a ratio of the template molecules to the functional monomers to the cross-linking agents of 1:8:30 (mol:mol:mol), 10 mg of the initiator, and a synthesis temperature of 70 °C. The imprinting factor of SSO-MIPs synthesized under the optimized process was found to reach 2.51, and the SSO-MIPs synthesized by this method exhibited a good adsorption effect, emitted less pollution during the synthesis process, and are convenient for demulsification. This research reports a reliable method for the synthesis of solanesol molecularly imprinted polymers. Full article

We live in an era of unprecedented biodiversity loss, affecting the taxonomic composition of ecosystems worldwide. The immense task of quantifying human imprints on global ecosystems has been greatly simplified by developments in high-throughput DNA sequencing technology (HTS). Approaches like DNA metabarcoding enable the study of biological communities at unparalleled detail. However, current protocols for HTS-based biodiversity exploration have several drawbacks. They are usually based on short sequences, with limited taxonomic and phylogenetic information content. Access to expensive HTS technology is often restricted in developing countries. Ecosystems of particular conservation priority are often remote and hard to access, requiring extensive time from field collection to laboratory processing of specimens. The advent of inexpensive mobile laboratory and DNA sequencing technologies show great promise to facilitate monitoring projects in biodiversity hot-spots around the world. Recent attention has been given to portable DNA sequencing studies related to infectious organisms, such as bacteria and viruses, yet relatively few studies have focused on applying these tools to Eukaryotes, such as plants and animals. Here, we outline the current state of genetic biodiversity monitoring of higher Eukaryotes using Oxford Nanopore Technology’s MinION portable sequencing platform, as well as summarize areas of recent development. Full article