Search Results (736)

The balance between cortical excitation and inhibition (E/I balance) in the cerebral cortex is critical for cognitive processing and neuroplasticity. Modulation of this balance has been linked to a wide range of neuropsychiatric and neurodegenerative disorders. The human visual system has well-differentiated magnocellular (M) and parvocellular (P) pathways, which provide a useful model to study cortical excitability using non-invasive visual flicker stimulation. We present an Arduino-driven non-image forming system to deliver controlled flickering light stimuli at different frequencies and wavelengths. By triggering the critical flicker fusion (CFF) frequency, we attempt to modulate the M-pathway activity and attenuate P-pathway responses, in parallel with induced optical scattering. EEG recordings were used to monitor cortical excitability and oscillatory dynamics during visual stimulation. Visual stimulation in the CFF, combined with induced optical scattering, selectively enhanced magnocellular activity and suppressed parvocellular input. EEG analysis showed a modulation of cortical oscillations, especially in the high frequency beta and gamma range. Our results support the hypothesis that visual flicker in the CFF, in addition to spatial degradation, initiates detectable neuroplasticity and regulates cortical excitation and inhibition. These findings suggest new avenues for therapeutic manipulation through visual pathways in diseases such as Alzheimer’s disease, epilepsy, severe depression, and schizophrenia. Full article

As the resolution and data volume of remote sensing imagery continue to grow, achieving efficient compression without sacrificing reconstruction quality remains a major challenge, given that traditional handcrafted codecs often fail to balance rate-distortion performance and computational complexity, while deep learning-based approaches offer superior representational capacity. However, challenges remain in achieving a balance between fine-detail adaptation and computational efficiency. Mamba, a state–space model (SSM)-based architecture, offers linear-time complexity and excels at capturing long-range dependencies in sequences. It has been adopted in remote sensing compression tasks to model long-distance dependencies between pixels. However, despite its effectiveness in global context aggregation, Mamba’s uniform bidirectional scanning is insufficient for capturing high-frequency structures such as edges and textures. Moreover, existing visual state–space (VSS) models built upon Mamba typically treat all channels equally and lack mechanisms to dynamically focus on semantically salient spatial regions. To address these issues, we present an innovative architecture for distant sensing image compression, called the Multi-scale Channel Global Mamba Network (MGMNet). MGMNet integrates a spatial–channel dynamic weighting mechanism into the Mamba architecture, enhancing global semantic modeling while selectively emphasizing informative features. It comprises two key modules. The Wavelet Transform-guided Local Structure Decoupling (WTLS) module applies multi-scale wavelet decomposition to disentangle and separately encode low- and high-frequency components, enabling efficient parallel modeling of global contours and local textures. The Channel–Global Information Modeling (CGIM) module enhances conventional VSS by introducing a dual-path attention strategy that reweights spatial and channel information, improving the modeling of long-range dependencies and edge structures. We conducted extensive evaluations on three distinct remote sensing datasets to assess the MGMNet. The results of the investigations revealed that MGMNet outperforms the current SOTA models across various performance metrics. Full article

Target detection in UAV aerial images has found increasingly widespread applications in emergency rescue, maritime monitoring, and environmental surveillance. However, traditional detection models suffer significant performance degradation due to challenges including substantial scale variations, high proportions of small targets, and dense occlusions in UAV-captured images. To address these issues, this paper proposes DMF-YOLO, a high-precision detection network based on YOLOv10 improvements. First, we design Dynamic Dilated Snake Convolution (DDSConv) to adaptively adjust the receptive field and dilation rate of convolution kernels, enhancing local feature extraction for small targets with weak textures. Second, we construct a Multi-scale Feature Aggregation Module (MFAM) that integrates dual-branch spatial attention mechanisms to achieve efficient cross-layer feature fusion, mitigating information conflicts between shallow details and deep semantics. Finally, we propose an Expanded Window-based Bounding Box Regression Loss Function (EW-BBRLF), which optimizes localization accuracy through dynamic auxiliary bounding boxes, effectively reducing missed detections of small targets. Experiments on the VisDrone2019 and HIT-UAV datasets demonstrate that DMF-YOLOv10 achieves 50.1% and 81.4% mAP50, respectively, significantly outperforming the baseline YOLOv10s by 27.1% and 2.6%, with parameter increases limited to 24.4% and 11.9%. The method exhibits superior robustness in dense scenarios, complex backgrounds, and long-range target detection. This approach provides an efficient solution for UAV real-time perception tasks and offers novel insights for multi-scale object detection algorithm design. Full article

Monitoring land cover/use dynamics and wildfire occurrences is very important for land management planning and risk mitigation practices. In this research, moderate-resolution imaging spectroradiometer (MODIS) annual land cover images for the period 2001–2023 are utilized for the twenty administrative regions of Italy. Monthly MODIS burned area images are utilized for the period 2001–2020 to study wildfire occurrences across these regions. In addition, monthly Global Precipitation Measurement images for the period 2001–2020 are employed to estimate correlations between precipitation and burned areas annually and seasonally. Boxplots are produced to show the distributions of each land cover/use type within the regions. The non-parametric Mann–Kendall trend test and Sen’s slope are applied to estimate a linear trend, with statistical significance being evaluated for each land cover/use time series of size 23. Pearson’s correlation method is applied for correlation analysis. It is found that grasslands and woodlands have been declining and increasing in most regions, respectively, most significantly in Abruzzo (−0.88%/year for grasslands and 0.71%/year for grassy woodlands). The most significant and frequent wildfires have been observed in southern Italy, particularly in Basilicata, Apulia, and Sicily, mainly in grasslands. The years 2007 and 2017 experienced severe wildfires in the southern regions, mainly during July and August, due to very hot and dry conditions. Negative Pearson’s correlations are estimated between precipitation and burnt areas, with the most significant one being for Basilicata during the fire season (r = −0.43). Most of the burned areas were mainly within the elevation range of 0–500 m and the lowlands of Apulia. In addition, for the 2001–2020 period, a high positive correlation (r > 0.7) is observed between vegetation and land surface temperature, while significant negative correlations between these variables are observed for Apulia (r ≈ −0.59), Sicily (r ≈ −0.69), and Sardinia (r ≈ −0.74), and positive correlations (r > 0.25) are observed between vegetation and precipitation in these three regions. This study’s findings can guide land managers and policymakers in developing or maintaining a sustainable environment. Full article

A comprehensive framework for ultrasound imaging simulations is presented. Solutions to an inhomogeneous wave equation are provided, yielding a linear model for characterizing ultrasound propagation and scattering in soft tissue. This simulation approach, which is based upon the fast nearfield method, is implemented in the Fast Object-oriented C++ Ultrasound Simulator (FOCUS) and is extended to a range of imaging modalities, including synthetic aperture, B-mode, plane wave, and color Doppler imaging. The generation of radiofrequency (RF) data and the receive beamforming techniques employed for each imaging modality, along with background on color Doppler imaging, are described. Simulation results demonstrate rapid convergence and lower error rates compared to conventional spatial impulse response methods and Field II, resulting in substantial reductions in computation time. Notably, the framework effectively simulates hundreds of thousands of scatterers without the need for a full three-dimensional (3D) grid, and the inherent randomness in the scatterer distributions produces realistic speckle patterns. A plane wave imaging example, for instance, achieves high fidelity using 100,000 scatterers with five steering angles, and the simulation is completed on a personal computer in a few minutes. Furthermore, by modeling scatterers as moving particles, the simulation framework captures dynamic flow conditions in vascular phantoms for color Doppler imaging. These advances establish FOCUS as a robust, versatile tool for the rapid prototyping, validation, and optimization of both established and novel ultrasound imaging techniques. Full article

Semantic segmentation of remote sensing imagery is a pivotal task for intelligent interpretation, with critical applications in urban monitoring, resource management, and disaster assessment. Recent advancements in deep learning have significantly improved RS image segmentation, particularly through the use of convolutional neural networks, which demonstrate remarkable proficiency in local feature extraction. However, due to the inherent locality of convolutional operations, prevailing methodologies frequently encounter challenges in capturing long-range dependencies, thereby constraining their comprehensive semantic comprehension. Moreover, the preprocessing of high-resolution remote sensing images by dividing them into sub-images disrupts spatial continuity, further complicating the balance between local feature extraction and global context modeling. To address these limitations, we propose DMA-Net, a Dynamic Morphology-Aware Segmentation Network built on an encoder–decoder architecture. The proposed framework incorporates three primary parts: a Multi-Axis Vision Transformer (MaxViT) encoder achieves a balance between local feature extraction and global context modeling through multi-axis self-attention mechanisms; a Hierarchy Attention Decoder (HA-Decoder) enhanced with Hierarchy Convolutional Groups (HCG) for precise recovery of fine-grained spatial details; and a Channel and Spatial Attention Bridge (CSA-Bridge) to mitigate the encoder–decoder semantic gap while amplifying discriminative feature representations. Extensive experimentation has been conducted to demonstrate the state-of-the-art performance of DMA-Net, which has been shown to achieve 87.31% mIoU on Potsdam, 83.23% on Vaihingen, and 54.23% on LoveDA, thereby surpassing existing methods. Full article

Short-term precipitation forecasting is a core task in meteorological science, aiming to achieve accurate predictions by modeling the spatiotemporal evolution of radar echo sequences, thereby supporting meteorological services and disaster warning systems. However, existing spatiotemporal sequence prediction methods still struggle to disentangle complex spatiotemporal dependencies effectively and fail to capture the nonlinear chaotic characteristics of precipitation systems. This often results in ambiguous predictions, attenuation of echo intensity, and spatial localization errors. To address these challenges, this paper proposes a unified spatiotemporal sequence prediction framework based on spatiotemporal masking, which comprises two stages: self-supervised pre-training and task-oriented fine-tuning. During pre-training, the model learns global structural features of meteorological systems from sparse contexts by randomly masking local spatiotemporal regions of radar images. In the fine-tuning stage, considering the importance of the temporal dimension in short-term precipitation forecasting and the complex long-range dependencies in spatiotemporal evolution of precipitation systems, we design an RNN-based cyclic temporal mask self-encoder model (MAE-RNN) and a transformer-based spatiotemporal attention model (STMT). The former focuses on capturing short-term temporal dynamics, while the latter simultaneously models long-range dependencies across space and time via a self-attention mechanism, thereby avoiding the smoothing effects on high-frequency details that are typical of conventional convolutional or recurrent structures. The experimental results show that STMT improves 3.73% and 2.39% in CSI and HSS key indexes compared with the existing advanced models, and generates radar echo sequences that are closer to the real data in terms of air mass morphology evolution and reflection intensity grading. Full article

This paper presents FWStab, a specialized video stabilization dataset tailored for flapping-wing platforms. The dataset encompasses five typical flight scenarios, featuring 48 video clips with intense dynamic jitter. The corresponding Inertial Measurement Unit (IMU) sensor data are synchronously collected, which jointly provide reliable support for multimodal modeling. Based on this, to address the issue of poor image acquisition quality due to severe vibrations in aerial vehicles, this paper proposes a multi-modal signal fusion video stabilization framework. This framework effectively integrates image features and inertial sensor features to predict smooth and stable camera poses. During the video stabilization process, the true camera motion originally estimated based on sensors is warped to the smooth trajectory predicted by the network, thereby optimizing the inter-frame stability. This approach maintains the global rigidity of scene motion, avoids visual artifacts caused by traditional dense optical flow-based spatiotemporal warping, and rectifies rolling shutter-induced distortions. Furthermore, the network is trained in an unsupervised manner by leveraging a joint loss function that integrates camera pose smoothness and optical flow residuals. When coupled with a multi-stage training strategy, this framework demonstrates remarkable stabilization adaptability across a wide range of scenarios. The entire framework employs Long Short-Term Memory (LSTM) to model the temporal characteristics of camera trajectories, enabling high-precision prediction of smooth trajectories. Full article

Optical coherence tomography (OCT) is a non-invasive imaging technique that provides high-resolution, real-time visualization of soft and hard periodontal tissues. It offers micrometer-level resolution (typically ~10–15 μm) and a scan depth ranging from approximately 0.5 to 2 mm, depending on tissue type and system configuration. The field of view generally spans a few millimeters, which is sufficient for imaging gingiva, sulcus, and superficial bone contours. Over the past two decades, its application in periodontology has gained increasing attention due to its ability to detect structural changes in gingival and alveolar tissues without the need for ionizing radiation. Various OCT modalities, including time-domain, Fourier-domain, and swept-source OCT, have been explored for periodontal assessment, offering valuable insights into tissue morphology, disease progression, and treatment outcomes. Recent innovations include the development of three-dimensional (3D) OCT imaging and OCT angiography (OCTA), enabling the volumetric visualization of periodontal structures and microvascular patterns in vivo. Compared to conventional imaging techniques, such as radiography and cone beam computed tomography (CBCT), OCT offers superior soft tissue contrast and the potential for dynamic in vivo monitoring of periodontal conditions. Recent advancements, including the integration of artificial intelligence (AI) and the development of portable OCT systems, have further expanded its diagnostic capabilities. However, challenges, such as limited penetration depth, high costs, and the need for standardized clinical protocols, must be addressed before widespread clinical implementation. This narrative review provides an updated overview of the principles, applications, and technological advancements of OCT in periodontology. The current limitations and future perspectives of this technology are also discussed, with a focus on its potential role in improving periodontal diagnostics and personalized treatment approaches. Full article

This paper proposes a dual-mode CMOS analog front-end (AFE) circuit for short-wave infrared (SWIR) image sensors, which integrates a hybrid readout circuit (ROIC) and a 12-bit two-step single-slope analog-to-digital converter (TS-SS ADC). The ROIC dynamically switches between buffered-direct-injection (BDI) and direct-injection (DI) modes, thus balancing injection efficiency against power consumption. While the DI structure offers simplicity and low power, it suffers from unstable biasing and reduced injection efficiency under high background currents. Conversely, the BDI structure enhances injection efficiency and bias stability via an input buffer but incurs higher power consumption. To address this trade-off, a dual-mode injection architecture with mode-switching transistors is implemented. Mode selection is executed in-pixel via a low-leakage transmission gate and coordinated by the column timing controller, enabling low-current pixels to operate in low-noise BDI mode, whereas high-current pixels revert to the low-power DI mode. The TS-SS ADC employs a four-terminal comparator and dynamic reference voltage compensation to mitigate charge leakage and offset, which improves signal-to-noise ratio (SNR) and linearity. The prototype occupies 2.1 mm × 2.88 mm in a 0.18 µm CMOS process and serves a 64 × 64 array. The AFE achieves a dynamic range of 75.58 dB, noise of 249.42 μV, and 81.04 mW power consumption. Full article

Strongly driven fluid and combustion systems typically contain a few, nonlinearly coupled, major flow constituents. It is necessary to identify the flow constituents in order to establish the underlying dynamics and to control these complex flows. Due to non-trivial boundary condition in realistic systems and long-range coupling, it is often difficult to construct accurate models of large-scale reacting systems. The question then arises if these flow constituents can be identified and controlled through analysis of experimental data. The difficulties in such analyses originate in the presence of high levels of noise and irregularities in the flow. A typical time series contains high-frequency noise as well as low-frequency features originating from the near translational invariance of the underlying fluid systems. We propose a pair of approaches to study such data. The first is the use of auto and cross correlation functions. Auto-correlation functions of the time series from a single transducer can be used effectively to demonstrate the low dimensionality of the flow. Second, we show that multi-point time series from appropriately placed transducers can be used to establish spatial characteristics of these flow constituents. The novelty of the approaches lies in the establishment of geometric and dynamic features of the primary flow constituents based on sensor data only, without the need of expensive imaging tools. These methods can potentially identify changes in flow behavior within complex propulsion systems, such as aircraft engines, by utilizing data collected from embedded transducers. Full article

Aerosols play a critical role in modulating the land–atmosphere energy balance, influencing regional climate dynamics, and affecting air quality. Xinjiang, a typical arid and semi-arid region in China, frequently experiences dust events and complex aerosol transport processes. This study provides a comprehensive analysis of the spatiotemporal evolution and potential source regions of aerosols in Xinjiang from 2005 to 2023, based on Moderate Resolution Imaging Spectroradiometer (MODIS) aerosol products (MCD19A2), Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) vertical profiles, ground-based PM_2.5 and PM₁₀ concentrations, MERRA-2 and ERA5 reanalysis datasets, and HYSPLIT backward trajectory simulations. The results reveal pronounced spatial and temporal heterogeneity in aerosol optical depth (AOD). In Northern Xinjiang (NXJ), AOD exhibits relatively small seasonal variation with a wintertime peak, while Southern Xinjiang (SXJ) shows significant seasonal and interannual variability, characterized by high AOD in spring and a minimum in winter, without a clear long-term trend. Dust is the dominant aerosol type, accounting for 96.74% of total aerosol content, and AOD levels are consistently higher in SXJ than in NXJ. During winter, aerosols are primarily deposited in the near-surface layer as a result of local and short-range transport processes, whereas in spring, long-range transport at higher altitudes becomes more prominent. In NXJ, air masses are primarily sourced from local regions and Central Asia, with stronger pollution levels observed in winter. In contrast, springtime pollution in Kashgar is mainly influenced by dust emissions from the Taklamakan Desert, exceeding winter levels. These findings provide important scientific insights for atmospheric environment management and the development of targeted dust mitigation strategies in arid regions. Full article

Oriented object detection in remote sensing images is a particularly challenging task, especially when it involves detecting tiny, densely arranged, or occluded objects. Moreover, such remote sensing images are often susceptible to noise, which significantly increases the difficulty of the task. To address these challenges, we introduce the Wavelet-Domain Adaptive Receptive Field Network (WDARFNet), a novel architecture that combines Convolutional Neural Networks (CNNs) with Discrete Wavelet Transform (DWT) to enhance feature extraction and noise robustness. WDARFNet employs DWT to decompose feature maps into four distinct frequency components. Through ablation experiments, we demonstrate that selectively combining specific high-frequency and low-frequency features enhances the network’s representational capacity. Discarding diagonal high-frequency features, which contain significant noise, further enhances the model’s noise robustness. In addition, to capture long-range contextual information and adapt to varying object sizes and occlusions, WDARFNet incorporates a selective kernel mechanism. This strategy dynamically adjusts the receptive field based on the varying shapes of objects, ensuring optimal feature extraction for diverse objects. The streamlined and efficient WDARFNet achieves state-of-the-art performance on three challenging remote sensing object detection benchmarks: DOTA-v1.0, DIOR-R, and HRSC2016. Full article

High Dynamic Range (HDR) imaging is capable of capturing vivid and lifelike visual effects, which are crucial for fields such as computer vision, photography, and medical imaging. However, real-time processing of HDR content remains challenging due to the computational complexity of tone mapping algorithms and the inherent limitations of Low Dynamic Range (LDR) capture systems. This paper presents an adaptive HDR tone mapping processor that achieves high computational efficiency and robust image quality under varying exposure conditions. By integrating an exposure-adaptive factor into a bilateral filtering framework, we dynamically optimize parameters to achieve consistent performance across fluctuating illumination conditions. Further, we introduce a high-radix Taylor expansion technique to accelerate floating-point logarithmic and exponential operations, significantly reducing resource overhead while maintaining precision. The proposed architecture, implemented on a Xilinx XCVU9P FPGA, operates at 250 MHz and processes 4K video at 30 frames per second (FPS), outperforming state-of-the-art designs in both throughput and hardware efficiency. Experimental results demonstrate superior image fidelity with an average Tone Mapping Quality Index (TMQI): 0.9314 and 43% fewer logic resources compared to existing solutions, enabling real-time HDR processing for high-resolution applications. Full article

Background: Pancreatic neuroendocrine tumors (PanNETs) are relatively rare neoplasms with heterogeneous behavior, ranging from indolent to aggressive disease. The evolution of nuclear medicine has allowed the development of an efficient and advanced toolkit for the diagnosis and treatment of PanNETs. Case: A 45-year-old woman was diagnosed with a grade 1 PanNET and multiple liver metastases. She underwent distal pancreatectomy with splenectomy, extended liver resection, and radiofrequency ablation (RFA). Surgical planning was guided by [^99mTc]Tc-EDDA/HYNIC-TOC SPECT/CT (single-photon emission computed tomography/computed tomography) and preoperative [^99mTc]Tc-mebrofenin-based functional liver volumetry. Functional liver volumetry based on dynamic [^99mTc]Tc-mebrofenin SPECT/CT facilitated precise surgical planning and reliable assessment of the efficacy of parenchymal modulation, thereby aiding in the prevention of post-hepatectomy liver failure. Liver fibrosis was non-invasively evaluated using two-dimensional shear wave elastography (2D-SWE). Tumor progression was monitored using somatostatin receptor scintigraphy, chromogranin A, and contrast-enhanced CT. Recurrent disease was treated with somatostatin analogues (SSAs) and [¹⁷⁷Lu]Lu-DOTA-TATE peptide receptor radionuclide therapy (PRRT). Despite progression to grade 3 disease (Ki-67 from 1% to 30%), the patient remains alive 53 months post-diagnosis, in complete remission, with an ECOG (Eastern Cooperative Oncology Group) status of 0. Conclusions: Functional imaging played a pivotal role in guiding therapeutic decisions throughout the disease course. This case not only underscores the clinical utility of advanced nuclear imaging but also illustrates the dynamic nature of pancreatic neuroendocrine tumors. The transition from low-grade to high-grade disease highlights the need for further studies on tumor progression mechanisms and the potential role of adjuvant therapies in managing PanNETs. Full article