Search Results (595)

Nonlinear characteristics are essential for neuromorphic devices to process high-dimensional and unstructured data. However, enabling a device to realize a nonlinear response under the same stimulation condition is challenging as this involves two opposing processes: simultaneous charge accumulation and recombination. In this study, a hybrid transistor based on a mixed-halide perovskite was fabricated to achieve dynamic nonlinear changes in synaptic plasticity. The utilization of a light-induced mixed-bandgap structure within the mixed perovskite film has been demonstrated to increase the recombination paths of photogenerated carriers of the hybrid film, thereby promoting the formation of nonlinear signals in the device. The constructed heterojunction optoelectronic synaptic transistor, formed by combining a mixed-halide perovskite with a p-type semiconductor, generates dynamic nonlinear decay responses under 400 nm light pulses with an intensity as low as 0.02 mW/cm². Furthermore, it has been demonstrated that nonlinear photocurrent growth can be achieved under 650 nm light pulses. It is important to note that this novel nonlinear response is characterized by its dynamism. These improvements provide a novel method for expanding the modulation capability of optoelectronic synaptic devices for synaptic plasticity. Full article

Lead halide perovskite quantum dots, also known as perovskite nanocrystals, are considered one of the most promising photovoltaic materials for solar cells due to their outstanding optoelectronic properties and simple preparation techniques. The key factors restricting the photoelectric conversion efficiency of solar cell systems are the separation and transmission performances of charge carriers. Here, femtosecond time-resolved ultrafast spectroscopy was used to measure the interfacial charge transfer dynamics of different sizes of CsPbBr₃ assembled with TiO₂. The effect of perovskite size on the charge transfer is discussed. According to our experimental data analysis, the time constants of the interfacial electron transfer and charge recombination of the assembled systems of CsPbBr₃ and titanium dioxide become larger when the size of the CsPbBr₃ nanocrystals increases. We discuss the physical mechanism by which the size of perovskites affects the rate of charge transfer in detail. We expect that our experimental results provide experimental support for the application of novel quantum dots for solar cell materials. Full article

A potential field of study for improving the efficiency of next-generation photovoltaic devices hot carriers in perovskite solar cells is investigated in this review paper. Considering their relevance to hot carrier dynamics, the paper thoroughly studies metal halide perovskites’ essential characteristics and topologies. We review important aspects like carrier excitation, exciton binding energy, phonon coupling, carrier excitation, thermalization, and hot hole and hot electron dynamics. We investigate, in particular, the significance of relaxation mechanisms, including thermalization and the Auger heating effect. Moreover, the bottleneck effect and defect management are discussed with an eye on their impact on device performance and carrier behaviour. A review of experimental methods for their use in investigating hot carrier dynamics, primarily transient photovoltage measurements, is included. Utilizing this thorough investigation, we hope to provide an insightful analysis of the difficulties and techniques for reducing the effect of hot carriers in perovskite solar cells and optimizing their performance. Full article

The rapid growth of the private space industry has intensified the demand for lightweight, efficient, and cost-effective photovoltaic technologies. Metal halide perovskite solar cells (PSCs) offer high power conversion efficiency (PCE), mechanical flexibility, and low-temperature solution processability, making them strong candidates for next-generation space power systems. However, exposure to extreme thermal cycling, high-energy radiation, vacuum, and ultraviolet light in space leads to severe degradation. This study addresses these challenges by introducing three key design strategies: self-healing perovskite compositions that recover from radiation-induced damage, gradient buffer layers that mitigate mechanical stress caused by thermal expansion mismatch, and advanced encapsulation that serves as a multifunctional barrier against space environmental stressors. These approaches enhance device resilience and operational stability in space. The design strategies discussed in this review are expected to support long-term power generation for low-cost satellites, high-altitude platforms, and deep-space missions. Additionally, insights gained from this research are applicable to terrestrial environments with high radiation or temperature extremes. Perovskite solar cells represent a transformative solution for space photovoltaics, offering a pathway toward scalable, flexible, and radiation-tolerant energy systems. Full article

In this study, we investigate the influence of the halogen elements bromine (Br) and chlorine (Cl) on iodine defect properties primarily in FAPbI₃ through first-principles calculations, aiming to understand the effect of high defect densities on the efficiency of organic–inorganic hybrid perovskite cells. The results indicate that Br and Cl interstitials minimally alter the overall band structure of FAPbI₃ but significantly modify the defect energy levels. Br and Cl interstitials, with defect states closer to the valence band and lower formation energies, effectively convert deep-level traps induced by iodine interstitials (I_i) into shallow-level traps. This conversion enhances carrier transport by reducing non-radiative recombination while preserving light absorption efficiency. Excess Br/Cl co-doping in FAPbI₃ synthesis thereby suppresses non-radiative recombination and mitigates the detrimental effects of iodide-related defects. Full article

Two-dimensional lead halide perovskites are of significant interest for a variety of practical applications. However, the relationships between their composition and properties are not fully clear. Here we investigated photoluminescence from 2D Ruddlesden–Popper perovskites with different bulky spacer cations. Significant differences in their optical properties and stability are observed, and perovskites with benzylammonium (BZA) and phenethylammonium (PEA) were selected for more detailed investigation of the observed stability differences due to their similar structure. We find that PEA₂PbI₄ exhibits more narrow emission and increased stability compared to BZA₂PbI₄. In addition, PEA₂PbI₄ exhibits self-healing of defects evident from PL enhancement, which is absent for BZA₂PbI₄. The observed differences between perovskites with BZA and PEA spacer cations can be attributed to differences in the formation of spacer cation vacancies. Full article

Two−dimensional halide perovskites have emerged as promising optoelectronic materials, yet the uncontrolled defect formation during synthesis remains a critical challenge for their practical applications. In this work, we systematically investigate the structural, electronic, and optical properties of monolayer CsPb₂Br₅ in two representative configurations: ds−CsPb₂Br₅ and ss−CsPb₂Br₅. By introducing four types of vacancy defects—V_Br−c, V_Br−b, V_Cs, and V_Pb, we analyze their structural distortions, formation energies, and their impact on band structure and optical response using first−principles calculations. Our results reveal that Br−related vacancies are energetically most favorable and induce shallow defect levels and absorption edge redshifts in the ds−CsPb₂Br₅ structure, while in the ss−CsPb₂Br₅ configuration, only V_Br−b forms a defect state. V_Pb and V_Cs lead to significant sub−bandgap absorption enhancement and dielectric response due to band−edge reorganization, despite not introducing in−gap states. Notably, V_Br−c exhibits distinct infrared absorption in the ss−CsPb₂Br₅ model without electronic trap formation. These findings underscore the critical influence of defect type and slab asymmetry on the optoelectronic behavior of CsPb₂Br₅, providing guidance for defect engineering in perovskite−based optoelectronic applications. Full article

Ionic liquids (ILs) can ideally reduce defects and improve the film stability of emissive metal halide perovskite films. In this work, we measure how the structure and emission of methylammonium lead tribromide (MAPbBr₃) perovskite films is modulated by long alkyl chain-containing pyridinium, imidazolium, or pyrrolidinium ILs. Two different film deposition methods are compared, with the resultant films characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and photoluminescence (PL) spectroscopy. For the latter, the differences in PL intensity of the perovskite are quantified using photoluminescence quantum efficiency (PLQE) measurements. It is found that a spin coating method in conjunction with the use of an imidazolium-containing IL (for a given precursor concentration) produces the strongest emissive perovskite. This optimal enhancement is attributed to a function of accessible surface charges associated with the heterocyclic cation of a given IL and perovskite defect passivation by bromide, the latter elucidated with the help of density functional theory. Proof-of-concept device fabrication is demonstrated for the case of a light emitting diode (LED) with the IL present in the emissive perovskite layer. Full article

Artificial photoelectric synapses exhibit great potential for overcoming the Von Neumann bottleneck in computational systems. All-inorganic halide perovskites hold considerable promise in photoelectric synapses due to their superior photon-harvesting efficiency. In this study, a novel wavy-structured CsPbBr₃/ZnO hybrid film was realized by depositing zinc oxide (ZnO) onto island-like CsPbBr₃ film via atomic layer deposition (ALD) at 70 °C. Due to the capability of ALD to grow high-quality films over small surface areas, dense and thin ZnO film filled the gaps between the island-shaped CsPbBr₃ grains, thereby enabling reduced light-absorption losses and efficient charge transport between the CsPbBr₃ light absorber and the ZnO electron-transport layer. This ZnO/island-like CsPbBr₃ hybrid synaptic transistor could operate at a drain-source voltage of 1.0 V and a gate-source voltage of 0 V triggered by green light (500 nm) pulses with low light intensities of 0.035 mW/cm². The device exhibited a quiescent current of ~0.5 nA. Notably, after patterning, it achieved a significantly reduced off-state current of 10⁻¹¹ A and decreased the quiescent current to 0.02 nA. In addition, this transistor was able to mimic fundamental synaptic behaviors, including excitatory postsynaptic currents (EPSCs), paired-pulse facilitation (PPF), short-term to long-term plasticity (STP to LTP) transitions, and learning-experience behaviors. This straightforward strategy demonstrates the possibility of utilizing neuromorphic synaptic device applications under low voltage and weak light conditions. Full article

In this study, we investigated the formation mechanism of organo-metal halide perovskite nanostructures through a two-step process categorized as dissolution–recrystallization. It is proposed that the initial formation of nanostructures is governed by the generation of seed grains, whereas the Ostwald ripening model explains only the subsequent growth stage of these structures. We suggest that newly generated grains—formed adjacent to pre-positioned grains—experience compressive stress arising from volume expansion during the phase transition from PbI₂ to the MAPbI₃ perovskite phase. Owing to their unstable state, these grains may serve as effective seeds for the nucleation and growth of nanostructures. Depending on the dipping time, diverse morphologies such as nanorods, plates, and cuboids were observed. The morphology, including the aspect ratio and growth direction of these nanostructures, appears to be strongly influenced by the residual compressive stress within the seed grains. These findings suggest that the shape and aspect ratio of perovskite nanostructures can be tailored by carefully regulating nucleation, dissolution, and growth dynamics during the two-step process. Full article

Perovskite quantum dots (PVK QDs) are gaining significant attention as potential materials for next-generation memory devices leveraged by their ion dynamics, quantum confinement, optoelectronic synergy, bandgap tunability, and solution-processable fabrication. In this review paper, we explore the fundamental characteristics of organic/inorganic halide PVK QDs and their role in resistive switching memory architectures. We provide an overview of halide PVK QDs synthesis techniques, switching mechanisms, and recent advancements in memristive applications. Special emphasis is placed on the ionic migration and charge trapping phenomena governing resistive switching, along with the prospects of photonic memory devices that leverage the intrinsic photosensitivity of PVK QDs. Despite their advantages, challenges such as stability, scalability, and environmental concerns remain critical hurdles. We conclude this review with insights into potential strategies for enhancing the reliability and commercial viability of PVK QD-based memory technologies. Full article

This study investigates the potential correlation between C—H···Br and N—H···Br hydrogen bonds in CH₃NH₃PbBr₃ over a broad temperature range (50–350 K), using a statistical analysis of molecular dynamics simulations. The analysis focused on quantifying the relationship between both hydrogen bond types via Pearson and Spearman correlation coefficients, derived from extensive datasets obtained from simulation trajectories. The results revealed a notable discrepancy between the two coefficients at low temperatures (T ≤ 125 K): While Spearman’s values suggested a strong monotonic correlation, Pearson’s values indicated a lack of linear association. Further analysis through data segmentation and block averaging demonstrated that the high Spearman coefficients at low temperatures were not statistically robust. At higher temperatures (T > 125 K), both correlation coefficients consistently exhibited low values, confirming the absence of meaningful correlation. These findings suggest that the formation of C–H···Br and N–H···Br hydrogen bonds occurs independently, with no evidence of cooperative behavior. Full article

Organic–inorganic hybrid halide perovskites have emerged as promising optoelectronic materials owing to their exceptional optoelectronic properties and versatile crystal structures. The introduction of chiral organic ligands into perovskite frameworks, breaking the inversion symmetry of the structure, has attracted significant attention toward chiral perovskites. Herein, the recent advances in various synthesis strategies for chiral perovskite single crystals (SCs) are systematically demonstrated. Then, we elucidate an in-depth understanding of the chirality transfer mechanisms from chiral organic ligands to perovskite inorganic frameworks. Furthermore, representative examples of chiral perovskite SC-based applications are comprehensively discussed, including circularly polarized light (CPL) photodetection, nonlinear optical (NLO) responses, and other emerging chirality-dependent applications. In the end, an outlook for future challenges and research opportunities is provided, highlighting the transformative potential of chiral perovskites in next-generation optoelectronic devices. Full article

Metal halide perovskite (MHP) nanocrystals (NCs) offer great potential for high-efficiency optoelectronic devices; however, they suffer from structural softness and chemical instability. Doping MHP NCs can overcome this issue. In this work, we synthesize Mn-doped methylammonium lead bromide (MAPbBr₃) NCs using the ligand-assisted reprecipitation method and investigate their structural and optical stability. X-ray diffraction confirms Mn²⁺ substitution at Pb²⁺ sites and lattice contraction. Photoluminescence (PL) measurements show a blue shift, significant PL quantum yield enhancement, reaching 72% at 17% Mn²⁺ doping, and a 34% increase compared to undoped samples, attributed to effective defect passivation and reduced non-radiative recombination, supported by time-resolved PL data. Mn²⁺ doping also improves long-term stability under ambient conditions. Low-temperature PL reveals the crystal-phase transitions of perovskite NCs and Mn-doped NCs to be somewhat different than those of pure MAPbBr₃. Mn²⁺ incorporation into perovskite promotes self-assembly into superlattices with larger crystal sizes, better structural order, and stronger inter-NC coupling. These results demonstrate that Mn²⁺ doping enhances both optical performance and structural robustness, advancing the potential of MAPbBr₃ NCs for stable optoelectronic applications. Full article

Lead halide perovskites (LHPs) have superior luminescent properties, but their toxicity hinders their commercialization, arousing interests in tin halide perovskites as environmentally friendly substitutes for LHPs. Herein, we synthesized a series of two-dimensional tin halide perovskite ODASnBr_4-xI_x (ODA denotes 1,8-octanediammonium, X = 0, 1, 2, 3, 4) microcrystals via an aqueous-phase method. The differences between ODASnI₄ and ODASnBr₄ in luminescent properties and morphological characteristics were systematically discussed for the first time and attributed to light-driven ligand-to-metal charge transfer. The prepared ODASnBr₄ has a PL peak at 567 nm and a PL QY of 99%, and the white light-emitting diodes fabricated with ODASnBr₄ and commercial blue phosphors realized a luminous efficacy of up to 96.27 lm/W, which demonstrated the remarkable potential of ODASnBr₄ microcrystals for high-efficiency white light-emitting diode applications. Full article