Search Results (127)

This study presents the development of Cu-doped NiMo/TiO₂ photoelectrocatalysts for simultaneous green hydrogen production and pharmaceutical pollutant removal under simulated solar irradiation. The catalysts were synthesized via wet impregnation (15 wt.% total metal loading with 0.6 wt.% Cu) and thermally treated at 400 °C and 900 °C to investigate structural transformations and catalytic performance. Comprehensive characterization (XRD, BET, SEM, XPS) revealed phase transitions, enhanced crystallinity, and redistribution of redox states upon Cu incorporation, particularly the formation of NiTiO₃ and an increase in oxygen vacancies. Crystallite sizes for anatase, rutile, and brookite ranged from 21 to 47 nm at NiMoCu400, while NiMoCu900 exhibited only the rutile phase with 55 nm crystallites. BET analysis showed a surface area of 44.4 m²·g⁻¹ for NiMoCu400, and electrochemical measurements confirmed its higher electrochemically active surface area (ECSA, 2.4 cm²), indicating enhanced surface accessibility. In contrast, NiMoCu900 exhibited a much lower BET surface area (1.4 m²·g⁻¹) and ECSA (1.4 cm²), consistent with its inferior photoelectrocatalytic performance. Compared to previously reported binary NiMo/TiO₂ systems, the ternary NiMoCu/TiO₂ catalysts demonstrated significantly improved hydrogen production activity and more efficient photoelectrochemical degradation of paracetamol. Specifically, NiMoCu400 showed an anodic peak current of 0.24 mA·cm⁻² for paracetamol oxidation, representing a 60% increase over NiMo400 and a cathodic current of −0.46 mA·cm⁻² at −0.1 V vs. RHE under illumination, nearly six times higher than the undoped counterpart (–0.08 mA·cm⁻²). Mott–Schottky analysis further revealed that NiMoCu400 retained n-type behavior, while NiMoCu900 exhibited an unusual inversion to p-type, likely due to Cu migration and rutile-phase-induced realignment of donor states. Despite its higher photosensitivity, NiMoCu900 showed negligible photocurrent, confirming that structural preservation and surface redox activity are critical for photoelectrochemical performance. This work provides mechanistic insight into Cu-mediated photoelectrocatalysis and identifies NiMoCu/TiO₂ as a promising bifunctional platform for integrated solar-driven water treatment and sustainable hydrogen production. Full article

Esterification is a key transformation in the production of lubricants, pharmaceuticals, and fine chemicals. Conventional processes employing homogeneous acid catalysts suffer from limitations such as corrosive byproducts, energy-intensive separation, and poor catalyst reusability. This review provides a comprehensive overview of heterogeneous catalytic systems, including ion exchange resins, zeolites, metal oxides, mesoporous materials, and others, for improved ester synthesis. Recent advances in membrane-integrated reactors, such as pervaporation and nanofiltration, which enable continuous water removal, shifting equilibrium and increasing conversion under milder conditions, are reviewed. Dual-functional membranes that combine catalytic activity with selective separation further enhance process efficiency and reduce energy consumption. Enzymatic systems using immobilized lipases present additional opportunities for mild and selective reactions. Future directions emphasize the integration of pervaporation membranes, hybrid catalyst systems combining biocatalysts and metals, and real-time optimization through artificial intelligence. Modular plug-and-play reactor designs are identified as a promising approach to flexible, scalable, and sustainable esterification. Overall, the interaction of catalyst development, membrane technology, and digital process control offers a transformative platform for next-generation ester synthesis aligned with green chemistry and industrial scalability. Full article

Mandelic acid (MA), as an important chiral aromatic hydroxy acid, is widely used in medicine, the chemical industry, and agriculture. With the continuous growth of market demand, traditional chemical synthesis methods are increasingly inadequate to meet the requirements of green and sustainable development due to issues such as complex processes, poor stereoselectivity, numerous byproducts, and serious environmental pollution. MA synthesis strategies based on biocatalytic technology have become a research hotspot due to their high efficiency, environmental friendliness, and excellent stereoselectivity. Significant progress has been made in enzyme engineering modifications, metabolic pathway design, and process optimization. Importantly, biomechanical research provides a transformative perspective for this field. By analyzing the mechanical response characteristics of microbial cells in bioreactors, biomechanics facilitates the regulation of relevant environmental factors during the fermentation process, thereby improving synthesis efficiency. Molecular dynamics simulations are also employed to uncover stability differences in enzyme–substrate complexes, providing a structural mechanics basis for the rational design of highly catalytically active enzyme variants. These biomechanic-driven approaches lay the foundation for the future development of intelligent, responsive biosynthesis systems. The deep integration of biomechanics and synthetic biology is reshaping the process paradigm of green MA manufacturing. This review will provide a comprehensive summary of the applications of MA and recent advances in its biosynthesis, with a particular focus on the pivotal role of biomechanical characteristics. Full article

Lignin, the most abundant renewable aromatic biopolymer on Earth, is rapidly emerging as a powerful enabler of next-generation sustainable technologies. This review shifts the focus to the latest industrial breakthroughs that exploit lignin’s multifunctional properties across energy, agriculture, healthcare, and environmental sectors. Lignin-derived carbon materials are offering scalable, low-cost alternatives to critical raw materials in batteries and supercapacitors. In agriculture, lignin-based biostimulants and controlled-release fertilizers support resilient, low-impact food systems. Cosmetic and pharmaceutical industries are leveraging lignin’s antioxidant, UV-protective, and antimicrobial properties to create bio-based, clean-label products. In water purification, lignin-based adsorbents are enabling efficient and biodegradable solutions for persistent pollutants. These technological leaps are not merely incremental, they represent a paradigm shift toward a materials economy powered by renewable carbon. Backed by global sustainability roadmaps like the European Green Deal and China’s 14th Five-Year Plan, lignin is moving from industrial residue to strategic asset, driven by unprecedented investment and cross-sector collaboration. Breakthroughs in lignin upgrading, smart formulation, and application-driven design are dismantling long-standing barriers to scale, performance, and standardization. As showcased in this review, lignin is no longer just a promising biopolymer, it is a catalytic force accelerating the global transition toward circularity, climate resilience, and green industrial transformation. The future of sustainable innovation is lignin-enabled. Full article

Cocktail-type catalysis represents a significant shift in the understanding of catalytic processes, recognizing that multiple interconverting species—such as metal complexes, clusters, and nanoparticles—can coexist and cooperate within a single reaction environment. Originating from mechanistic studies on palladium-catalyzed systems, this concept challenges the classical division between homogeneous and heterogeneous catalysis. Instead, it introduces a dynamic framework where catalysts adapt and evolve under reaction conditions, often enhancing efficiency, selectivity, and durability. Using advanced spectroscopic, microscopic, and computational techniques, researchers have visualized the formation and transformation of catalytic species in real time. The cocktail-type approach has since been extended to platinum, nickel, copper, and other transition metals, revealing a general principle in catalysis. This approach not only resolves long-standing mechanistic inconsistencies, but also opens new directions for catalyst design, green chemistry, and sustainable industrial applications. Embracing the complexity of catalytic systems may redefine future strategies in both fundamental research and applied catalysis. Full article

Fluorinated xenobiotics, such as per- and polyfluoroalkyl substances (PFAS), fluorinated pesticides, and pharmaceuticals, are extensively used across industries, but their extreme persistence, driven by the high carbon–fluorine (C–F) bond dissociation energy (~485 kJ/mol), poses serious environmental and health risks. These compounds have been detected in water, soil, and biota at concentrations from ng/L to µg/L, leading to widespread contamination and bioaccumulation. Traditional remediation approaches are often costly (e.g., EUR >100/m³ for advanced oxidation), energy-intensive, and rarely achieve complete degradation. In contrast, microbial defluorination offers a low-energy, sustainable alternative that functions under mild conditions. Microorganisms cleave C–F bonds through reductive, hydrolytic, and oxidative pathways, mediated by enzymatic and non-enzymatic mechanisms. Factors including electron donor availability and oxygen levels critically influence microbial defluorination efficiency. Microbial taxa, including bacteria, fungi, algae, and syntrophic consortia, exhibit varying defluorination capabilities. Metagenomic and microbial ecology studies continue to reveal novel defluorinating organisms and metabolic pathways. Key enzymes, such as fluoroacetate dehalogenases, cytochrome P450 monooxygenases, reductive dehalogenases, peroxidases, and laccases, have been characterised, with structural and mechanistic insights enhancing the understanding of their catalytic functions. Enzyme engineering and synthetic biology tools now enable the optimisation of these enzymes, and the design of microbial systems tailored for fluorinated compound degradation. Despite these advances, challenges remain in improving enzyme efficiency, broadening substrate specificity, and overcoming physiological constraints. This review emphasises the emerging promise of microbial defluorination as a transformative and green solution, uniquely integrating recent multidisciplinary findings to accelerate the development of sustainable microbial defluorination strategies for effective remediation of fluorinated xenobiotics. Full article

This study explores a series of eco-compatible, safe, inexpensive, and recyclable catalysts for the aza-Michael reaction, an essential transformation for constructing C-N bonds. In particular, we focus on hydrothermal carbons (HCB and HCC) prepared from chestnut cupule waste under mild, aqueous conditions, offering a sustainable alternative to traditional pyrolytic methods. These carbonaceous solids, thoroughly characterized by physicochemical techniques, exhibit notable catalytic activity, completing aza-Michael reactions in as little as 5–30 min for various model substrates. Their performance was benchmarked against Montmorillonite K10, [Cho][Pro] ionic liquid, and K10+[Cho][Pro], with the latter combination and [Cho][Pro] alone giving the fastest conversions. For example, the reaction of benzylamine with acrylonitrile reached complete conversion (typically 95% yield) in five minutes using [Cho][Pro], K10+[Cho][Pro], or likewise with HCB and HCC. Although the reactions catalyzed by hydrothermal carbons did not outperform in general those using K10-[Cho][Pro] or [Cho][Pro], they proceeded rapidly and afforded good to excellent yields. Furthermore, the HCC catalyst demonstrated excellent recyclability, maintaining its activity and yield over at least five cycles. These findings underscore the potential of hydrothermal carbons as efficient green heterogeneous catalysts, combining high surface area, porosity, and reusability with strong catalytic performance and scalability, in alignment with the principles of the circular economy. Full article

Under the dual transformation background of global digital economy and low-carbon development, the synergistic promotion of enterprise digital transformation and green upgrading has become an important path to realizing high-quality development. Based on the coupling coordination degree model, this paper constructs the enterprise “digital-green” dual transformation synergy measurement index system, and empirically analyzes the panel data of China’s A-share-listed companies from 2017 to 2022 using the entropy weight-coupling coordination degree model and the fixed effect model. This study finds that, firstly, the synergy degree of the eastern region is significantly higher than that of the inland, less-developed provinces, but the regional gap is narrowing and the spatial pattern is evolving from the “central collapse type” to the low-level equilibrium type. Second, there is a significant positive driving effect of digital finance on the collaborative transformation of enterprises’ digitalization and greening, and the path of its action includes the effect of alleviating financing constraints, the empowerment of information transparency, and the effect of moderating and amplifying entrepreneurship. Third, the driving efficacy of digital finance in state-owned enterprises is more prominent than that in private enterprises. Fourth, digital finance significantly affects the degree of synergy, but there is a threshold effect. This study reveals the catalytic role of digital finance in the coupling process of digital transformation and greening upgrading, which not only expands the analytical dimension of transition economy theory but also provides a quantitative basis for policymakers to optimize the allocation of financial resources and for enterprises to design transformation paths. Full article

Tetrasubstituted furans and their derivatives represent a versatile class of important heterocyclic frameworks widely distributed in natural products. These scaffolds also demonstrate significant potential in pharmaceutical chemistry, materials science, and organic synthesis methodologies. In this study, we successfully established a synergistic catalytic system utilizing benzoylacetonitriles, aldehydes, and benzoyl chlorides as substrates, facilitated by tributylphosphine and immobilized lipase (Novozym 435), to achieve efficient synthesis of cyano-containing tetrasubstituted furans. Under optimized conditions, we obtained a series of target products exhibiting exceptional substrate tolerance with good to excellent isolated yields ranging from 80% to 94%. Additionally, we proposed a reasonable reaction mechanism and verified it through controlled experiments. This methodology not only expands the synthetic utility of lipase in non-natural transformations but also establishes a paradigm of green chemistry for the construction of tetrasubstituted furans. Full article

Avocado is a rich source of numerous nutrients, such as micro- and macroelements, essential unsaturated fatty acids, and vitamins essential for the correct functioning of the body. Consequently, its consumption has significantly increased in recent years. The primary edible part of the fruit is the flesh, while the seed is still considered biowaste. Currently, various methods for utilization of this biowaste are being explored, prompting the authors of this work to investigate the catalytic properties of ground avocado seeds. Dried, ground avocado seeds were used as the catalyst in the environmentally friendly oxidation of limonene with oxygen. The process was carried out in mild conditions, without the use of any solvent and at atmospheric pressure. The studies examined the influence of temperature (70–110 °C), the amount of the catalyst (0.5–5.0 wt%), and the reaction time (15–360 min). The analyses of the post-reaction mixtures were performed using the gas chromatography method (GC). The maximum value of the conversion of limonene obtained during the tests was 36 mol%. The main products of this process were as follows: 1,2-epoxylimonene, carveol, and perillyl alcohol. Also, the following compounds were determined in the post-reaction mixtures: carvone and 1,2-epoxylimonene diol. The studied process is interesting, taking into account both the management of waste in the form of avocado seeds and possible wide applications of limonene transformation products in medicine, cosmetics and the food industry. Given that limonene is now increasingly being extracted from waste orange peels, this is also a good way to manage the future naturally derived limonene and reduce the amount of waste orange peels. The presented studies fit perfectly with the goals of sustainable development and circular economy and may be the basis for the future development of “green technology” for obtaining value-added oxygenated derivatives of limonene. These studies show the use of waste biomass in the form of avocado seeds to obtain a green catalyst. In this context, our research presents an effective way of waste valorization. Full article

With the rapid development of biorefinery technology, the efficient conversion of lignocellulose into high-value platform chemicals is of great significance for enhancing the value of renewable carbon resources. In this study, a hydroxyl-functionalized covalent organic framework (COF), TAPB-DHPA, was synthesized via an in situ method and innovatively applied to the catalytic conversion of xylo-oligosaccharides (XOS) into furfural. The results demonstrated that TAPB-DHPA possesses a large specific surface area, a well-developed porous structure, and excellent thermal stability, with abundant Brønsted acid (B acid) sites, exhibiting outstanding catalytic activity. Under optimal conditions, including a catalyst loading of 0.16 wt%, a reaction temperature of 180 °C, and a reaction time of 3 h, a furfural yield of up to 65.4% was achieved. The high selectivity was primarily attributed to the p-π conjugation effect between the benzene ring and the phenolic hydroxyl group, which enhanced the ionization ability of hydroxyl hydrogen, thereby effectively promoting the hydrolysis of XOS and subsequent dehydration. Furthermore, TAPB-DHPA exhibited excellent recyclability and stability, maintaining a furfural yield of over 59.9% after six cycles. This study provides new insights into the application of functionalized COF in biomass catalytic conversion and contributes to the green transformation of the pulp and paper industry into a biorefinery-based model. Full article

The production of formic acid (FA) from lignocellulose and its derived sugars represents a pivotal upgrading reaction in biorefinery. This work prepared a Mn-Mo doped carbon nanotube composite catalyst for the catalytic oxidation of glucose into FA in an O₂ atmosphere, under extremely low Mn (3.27%) and Mo (0.40%) loading conditions, displaying a comparable performance with the traditional vanadium-based catalyst suffering from toxicity issues. It was confirmed that the doping of Mo led to the formation of MnMoO_X and increased the contents of low-valence Mn species (Mn²⁺ + Mn³⁺), lattice oxygen (O_latt), and surface adsorbed oxygen (O_ads) based on various characterization methods, such as XRD, XPS, TEM and ICP, which were beneficial to improve the catalytic performance. The maximum FA yield of 58.8% could be achieved over Mn₉Mo₁O_X@MWCNT after reaction for 6 h at 140 °C, which was far more than that obtained with undoped MnO_X@MWCNT (14.5%) at the identical conditions. Glyoxylic acid and arabinose were identified as two main intermediates, suggesting that the transformation of glucose into FA over Mn₉Mo₁O_X@MWCNT involved two different paths. This work proved that manganese-based catalyst was a green alternative for upgrading lignocellulose via catalytic oxidation. Full article

This study successfully prepared MIL-101(Fe)@MoS₂ composite photocatalysts via hydrothermal methods to address the efficient removal of refractory organic dyes in dye wastewater. Characterization using X-ray diffraction (XRD), Fourier transform infrared (FT-IR), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS) confirmed that molybdenum disulfide (MoS₂) was uniformly loaded onto the surface of MIL-101(Fe), forming a heterojunction that significantly enhanced light absorption capacity and charge separation efficiency. In a visible-light-driven photo-Fenton system, this material exhibited excellent degradation performance for Congo red (CR). At an initial CR concentration of 50 mg/L, a catalyst dosage of 0.2 g/L, 4 mL of added H₂O₂, and pH 7, CR was completely degraded within 30 min, with the total organic carbon (TOC) removal reaching 72.5%. The material maintained high degradation efficiency (>90%) across a pH range of 3–9, overcoming the traditional Fenton system’s dependency on acidic media. Radical-trapping experiments indicated that superoxide radicals (·O₂⁻) and photogenerated holes (·h⁺) were the primary active species responsible for degradation, revealing a synergistic catalytic mechanism at the heterojunction interface. Recyclability tests showed that the material retained 90.8% degradation efficiency after five cycles, and an X-ray photoelectron spectroscopy (XPS) analysis demonstrated the stable binding of Fe and Mo, preventing secondary pollution. This study provides a scientific basis for developing efficient, stable, and wide-pH adaptable photo-Fenton catalytic systems, contributing significantly to the advancement of green water treatment technologies. Full article

Developing sustainable and efficient electrocatalysts for the oxygen evolution reaction (OER) is crucial for advancing energy storage technologies. This study explored the dual role of phosphorus as a dopant in carbon matrices and a key component in nickel phosphides (Ni₂P and Ni₁₂P₅), synthesized using dopamine (PDA) and ammonium phosphate as eco-friendly precursors. The phase formation of nickel phosphides was found to be highly dependent on the P/PDA ratio (0.15, 0.3, 0.6, and 0.9), allowing for the selective synthesis of Ni₂P or Ni₁₂P₅. Operando Raman spectroscopy revealed that both phases undergo surface transformation into nickel (oxy)hydroxide species under OER conditions, yet Ni₂P-based catalysts demonstrated superior activity and long-term stability. This enhancement is attributed to efficient electron transfer at the dynamic Ni₂P/NiOOH interface. Additionally, hollow nanostructures formed at intermediate P/PDA ratios (≤0.3) via the Kirkendall effect and Ostwald ripening contributed to an increased specific surface area and micropore volume, further improving the catalytic performance. Electrochemical impedance spectroscopy confirmed reduced interfacial resistance and enhanced charge transport. These findings offer new insights into the rational design of high-performance electrocatalysts and propose a green, tunable synthesis approach for advanced energy conversion applications. Full article

In pursuing sustainable environmental solutions, the concept of ‘waste to treasure’ has emerged as a promising approach. In this study, a new process is proposed to combine solid copper slag with hydrogen peroxide (H₂O₂) to remove nitrogen oxides (NOx) from acidic exhaust gases, thus effectively utilizing waste materials. Firstly, different smelting slags were screened to determine the catalytic potential of copper slag for hydrogen peroxide. Subsequently, the catalytic activity of the copper slags at various stages of the copper smelting process was thoroughly evaluated and optimized. In addition, a multifactorial evaluation of slow-cooled copper slag catalysts for removing NOx was carried out. Preliminary indications are that the iron phase in the copper slag is identified as the main source of catalytic activity sites. The results suggest that Fe²⁺/Fe³⁺ sites on the surface of the Fe phase in the slow-cooled copper slag may be crucial in improving the NOx removal efficiency. The main reactive oxygen species detected in the system were ·OH, ·O₂⁻, and ¹O₂. In addition, the transformation products, formation pathways, and reaction mechanisms of NO in the liquid phase were initially investigated and determined. This study provides a green and sustainable path for the utilization of solid waste and management of atmospheric fumes in the non-ferrous metal industry and offers new perspectives to address environmental challenges in industrial processes. Full article