Search Results (7,841)

The safe pretreatment of phosphogypsum involves a multivariable control process with strong coupling and nonlinear behavior, which limits the effectiveness of conventional control methods. To address this issue, an intelligent control strategy combining fuzzy control with a deep deterministic policy gradient (DDPG) algorithm is proposed. A multi-input multi-output control model is established using pH, moisture content, and flow rate as key variables, and a DDPG agent is employed to adaptively adjust the gain of the fuzzy controller. Simulation results demonstrate that the proposed method achieves faster response and improved stability, yielding a pH settling time of approximately 2.5 s and a steady-state moisture-content error on the order of 0.02 under representative operating conditions. Full article

To facilitate the successful achievement of the goals outlined in the 2030 Agenda for Sustainable Development, it is imperative to accelerate the advancement of green technological innovation effectiveness (GTIE). This study aims to synthesize three types of drivers and seven concurrent driving factors of green technological innovation effectiveness identified in existing theories, constructing a multiple concurrent mechanism model for such effectiveness. The fuzzy-set Qualitative Comparative Analysis (fsQCA) method is employed to identify the configurational conditions leading to high green technological innovation effectiveness. Furthermore, the robustness of these configurations is verified through panel decomposition, while Necessary Condition Analysis (NCA) is applied to test the necessity of the factors within these configurations and to conduct further examination. The results reveal that high green technological innovation effectiveness is driven by three types of multiple concurrent mechanisms: the “Demand–Pull and Technology–Push and Porter Effect-Driven” configuration type, the “Demand–Pull & Technology–Push-Driven” type, and the “Demand–Pull & Porter Effect-Driven” type. This paper’s contributions are threefold. First, it investigates the configurational drivers of green technological innovation effectiveness. Second, it uses Necessary Condition Analysis (NCA) to identify necessary conditions within these multiple concurrent effects, deepening insight into the drivers. Third, it reveals three patterns driving green innovation in industries and proposes corresponding sustainable manufacturing policy recommendations. Full article

Marine data assets are increasingly recognized as important drivers of value creation in the blue economy, yet their valuation remains challenging due to difficulties in isolating data-related earnings in capital-intensive maritime enterprises. This study proposes a methodological valuation framework that integrates the multi-period excess earnings method with the Analytic Hierarchy Process (AHP) and the Fuzzy Comprehensive Evaluation (FCE) approach, incorporating both financial and non-financial dimensions. The framework follows a “total synergistic return–data contribution separation” logic to isolate data-related excess earnings and applies an AHP–FCE-based adjustment coefficient to account for data quality, application value, and risk. A representative container shipping enterprise is used as an illustrative application to demonstrate the implementation logic of the framework. The results indicate that marine data assets can constitute a non-negligible component of enterprise value under reasonable parameter settings, while sensitivity analysis highlights the influence of key parameters such as the data contribution coefficient and discount rate. The proposed framework provides a transparent methodological reference for marine data asset valuation and supports sustainability-oriented research and practice in the blue economy. Full article

This paper proposes a novel method, the Convergent Radiation Algorithm (CRA), aimed at multi-attribute group decision-making (MAGDM) in circular intuitionistic fuzzy settings. The approach is aimed at reaching geometric consensus among experts, with uncertainties and hesitancies expressed via circular intuitionistic fuzzy numbers (CIFNs). First, the qualitative judgment in professionals is converted into a geometric space where experts’ assessments are represented as spatial points that reflect the differences between the opinions. All these points are gradually combined with the help of a radiation–reflection–convergence mechanism, which iteratively finds the Optimal Consensus Point (OCP) to minimize the overall weighted divergence over the evaluations. After that, a projection-based scoring method is used to locate good and bad optimal solutions, and the alternatives are ranked based on a comparison of their projection distance. It presents a numerical example with data supplied by the Hubei agro-ecological zone to demonstrate that the offered method helps to capture collective agreement and convergence behavior that is consistent, and makes the decision results readable and reliable. Full article

Regional vulnerability to food insecurity is shaped by intertwined socioeconomic and climatic factors. In Indonesia, vulnerability is evident in the rise in undernourishment from 8.23% in 2017 to 10.21% in 2022. This study proposes a new regional vulnerability index for food insecurity across Indonesia and shows that social and economic conditions are the main drivers. Using fuzzy set Qualitative Comparative Analysis (fsQCA), the study examines how combinations of poverty, unemployment, GRDP per capita, government expenditure per capita, economic growth, and rainfall jointly produce vulnerability. fsQCA groups regions with similar profiles and identifies multiple causal pathways instead of a single cause. Analysis of 34 provinces reveals nine distinct pathways, typically involving high poverty and unemployment, low income and government spending, slow economic growth, and low rainfall. The results highlight the need to account for each region’s specific combination of conditions and to use methods that capture causal complexity in food insecurity. Full article

This paper investigates the robust fault-tolerant control (FTC) problem for interval type-2 fuzzy systems (IT2FS) with simultaneous time-varying input and state delays. In order to more comprehensively capture system uncertainties, an Interval Type-2 (IT2) fuzzy model is constructed, which, compared to the conventional Interval Type-1 model, better captures the uncertainty information of the system. A premise-mismatched fault-tolerant controller is designed to ensure system stability in the presence of actuator faults, while providing greater flexibility in the selection of membership functions. In the stability analysis, a novel Lyapunov–Krasovskii functional is formulated, incorporating membership-dependent matrices and delay-product terms, leading to sufficient conditions for closed-loop stability based on linear matrix inequalities (LMIs). A numerical simulation and a practical physical model are used, respectively, to illustrate the effectiveness of the proposed method. Comparative experiments further reveal the impact of input delays and actuator faults on closed-loop performance, verifying the effectiveness and robustness of the designed controller, as well as the superiority of interval type-2 over interval type-1. Full article

This paper presents a superpixel segmentation algorithm that integrates anisotropic total variation regularization within a fuzzy clustering framework. While isotropic total variation is well-known for its edge-preserving properties, its non-adaptive nature often leads to over-regularization. In contrast, the anisotropic model formulates superpixel regularity in relation to image contours, thereby preventing the loss of image details in areas of high contour density during optimization. Compared to classical segmentation algorithms that employ non-adaptive regularization, the proposed content-adaptive approach enhances superpixel regularity while maintaining boundary adherence to image contours. Furthermore, to optimize the functional effectively, an alternating direction method of multipliers along with the enhanced Chambolle’s fast duality projection algorithm are employed. Competitive experiments against existing regular segmentation algorithms demonstrate that our proposed methodology achieves superior performance in terms of boundary recall, compactness, and shape regularity criteria, outperforming these methods by an average of at least 3%, 5%, and 3%, respectively. Furthermore, when compared with irregular segmentation algorithms, our approach achieves the best results in terms of compactness, contour density, and shape regularity criteria, with average improvements of at least 56%, 22%, and 45%, respectively. Full article

Unsafe behaviors remain a major contributor to workplace accidents within broader safety-management systems. Acknowledging the essential influence of organizational and leadership factors, this study focuses on systematically identifying and prioritizing individual-level determinants of unsafe behavior through an integrated qualitative–quantitative methodology to clarify their specific role within the wider safety framework. Grounded Theory analysis of semi-structured interviews with 40 industry professionals yielded a conceptual model encompassing demographic characteristics, general health, individual competencies, personality traits, and psychological factors. Subsequently, the Fuzzy Delphi Method, applied with 20 domain experts, validated and ranked these determinants. The analysis highlighted risk perception as the most influential factor, followed by work experience, skill level, knowledge, and risk-taking propensity, whereas variables such as family welfare, substance use, and self-display exhibited relatively minor effects. These findings reveal the multidimensional nature of unsafe behavior and underscore the importance of focusing on high-impact personal attributes to enhance workplace safety. By recognizing that many individual factors are shaped by organizational and psychosocial conditions, the study provides evidence-based insights for developing integrated safety management and targeted intervention strategies in industrial settings. Full article

To address the challenge of imprecise detection and control of fertilizer application rates caused by high granular flow during fertilization operations, a parallel diversion detection method with real-time application rate regulation is proposed. The mechanism of uniform distribution of discrete particles formed by high-throughput aggregated granular fertilizer was elucidated. Key components including the uniform fertilizer tube, sensor detection structure, six-channel diversion cone disc, and fertilizer convergence tube underwent parametric design, culminating in the innovative development of a six-channel parallel diversion detection device. A multi-channel parallel signal detection method was studied, and a synchronous multi-channel signal acquisition system was designed. Through calibration tests, relationship models were established between the measured flow rate of granular fertilizer and voltage, as well as between the actual flow rate and the rotational speed of the fertilizer discharge shaft. A fuzzy PID control model was constructed in MATLAB2023/Simulink. Using overshoot, response time, and stability as evaluation metrics, the control performance of traditional PID and fuzzy PID was compared and analyzed. To validate the control system’s precision, device performance tests were conducted. Results demonstrated that fuzzy PID control reduced the time required to reach steady state by 66.87% compared to traditional PID, while overshoot decreased from 7.38 g·s⁻¹ to 1.49 g·s⁻¹. Divergence uniformity tests revealed that at particle generation rates of 10, 20, 30, and 40 g·s⁻¹, the coefficient of variation for channel divergence consistency gradually increased with rising tilt angles. During field operations at 0–5.0° tilt, the coefficient of variation for channel divergence consistency remained below 7.72%. Bench tests revealed that the fuzzy PID control system achieved an average accuracy improvement of 3.64% compared to traditional PID control, with a maximum response time of 0.9 s. Field trials demonstrated detection accuracy no less than 92.64% at normal field operation speeds of 3.0–6.0 km·h⁻¹. This system enables real-time, precise detection of fertilizer application rates and closed-loop regulation. Full article

Selecting a sustainable healthcare waste treatment method is a complex multi-criteria problem influenced by environmental, economic, social and technological factors. This study addresses key gaps in the literature by proposing an intuitionistic fuzzy AHP–TOPSIS framework that explicitly models cognitive uncertainty and expert hesitation, while demonstrating its application through a real-world case study in Adana, Türkiye. In contrast to prior studies utilizing fewer criteria, our framework evaluates four treatment alternatives—incineration, steam sterilization, microwave, and landfill—across 17 comprehensive criteria that directly integrate circular economy principles such as resource recovery and energy efficiency. The results indicate that steam sterilization is the most sustainable option, demonstrating superior performance across environmental, economic, social, and technological dimensions. A 15-scenario sensitivity analysis ensures ranking resilience across varying decision contexts. Furthermore, a systematic comparative analysis highlights the methodological advantages of the proposed framework in terms of analytical granularity and robustness compared to existing models. The study also offers step-by-step operational guidance, creating a transparent and policy-responsive decision-support tool for healthcare waste management authorities to advance sustainable practices. Full article

The large-scale integration of electric vehicles (EVs) presents both challenges and opportunities for power grid stability and renewable energy utilization. Vehicle-to-Grid (V2G) technology enables EVs to serve as mobile energy storage units, facilitating peak shaving and valley filling while promoting the local consumption of photovoltaic and wind power. However, uncertainties in renewable energy generation and EV arrivals complicate the scheduling of bidirectional charging in stations equipped with hybrid energy storage systems. To address this, this paper proposes a multi-stage rolling optimization framework combined with a fuzzy logic-based decision-making method. First, a bidirectional charging scheduling model is established with the objectives of maximizing station revenue and minimizing load fluctuation. Then, an EV charging potential assessment system is designed, evaluating both maximum discharge capacity and charging flexibility. A fuzzy controller is developed to allocate EVs to unidirectional or bidirectional chargers by considering real-time predictions of vehicle arrivals and renewable energy generation. Simulation experiments demonstrate that the proposed method consistently outperforms a greedy scheduling baseline. In large-scale scenarios, it achieves an increase in station revenue, elevates the regional renewable energy consumption rate, and provides an additional equivalent peak-shaving capacity. The proposed approach can effectively coordinate heterogeneous resources under uncertainty, providing a viable scheduling solution for EV-aggregated participation in grid services and enhanced renewable energy integration. Full article

In the context of the “Dual Carbon” goals, achieving synergistic development between digitalization and green transformation in the coal power industry is essential for ensuring a just and sustainable energy transition. The core scientific problem addressed is the lack of a robust quantitative tool to evaluate the comprehensive performance of diverse transition scenarios in a complex environment characterized by multi-objective trade-offs and high uncertainty. This study establishes a sustainability-oriented four-dimensional performance evaluation system encompassing 22 indicators, covering Synergistic Economic Performance, Green-Digital Strategy, Synergistic Governance, and Technology Performance. Based on this framework, a Fuzzy DEMATEL–MultiMOORA–Borda integrated decision model is proposed to evaluate seven transition scenarios. The computational framework utilizes the Interval Type-2 Fuzzy DEMATEL (IT2FS-DEMATEL) method for robust causal analysis and weight determination, addressing the inherent subjectivity and vagueness in expert judgments. The model integrates MultiMOORA with Borda Count aggregation for enhanced ranking stability. All model calculations were implemented using Matlab R2022a. Results reveal that Carbon Price and Digital Hedging Capability (C13) and Digital-Driven Operational Efficiency (C43) are the primary drivers of synergistic performance. Among the scenarios, P3 (Digital Twin Empowerment and New Energy Co-integration) achieves the best overall performance (score: 0.5641), representing the most viable pathway for balancing industrial efficiency and environmental stewardship. Robustness tests demonstrate that the proposed model significantly outperforms conventional approaches such as Fuzzy AHP (Analytic Hierarchy Process) and TOPSIS under weight perturbations. Sensitivity analysis further identifies Financial Return (C44) and Green Transformation Marginal Economy (C11) as critical factors for long-term policy effectiveness. This study provides a data-driven framework and a robust decision-support tool for advancing the coal power industry’s low-carbon, intelligent, and resilient transition in alignment with global sustainability targets. Full article

Achieving a balance between rapid adaptation and robustness is a critical yet challenging objective in the design of industrial control systems. Model Reference Adaptive Control (MRAC) is a standard approach for managing system uncertainties; however, it suffers from a fundamental trade-off between adaptation speed and robustness. The high adaptation gains required for fast tracking often lead to parameter bursting or instability in the presence of noise. To resolve this issue, this paper proposes a new Dual-Loop Optimal Feedback Control (OFC) architecture applied to a Brushless DC (BLDC) motor drive. Unlike conventional methods that rely solely on tuning the adaptive mechanism, the proposed architecture introduces a parallel compensation loop designed to decouple disturbance rejection from reference tracking. This structure utilizes a Genetic Algorithm (GA) as an offline optimization engine to identify the Optimal Compensator gains that balance transient recovery with steady-state stability. Experimental validation demonstrates that the proposed Dual-Loop OFC architecture significantly outperforms traditional approaches. Specifically, it achieves an 88.99% reduction in overshoot and a 13.8% reduction in settling time compared to Conventional MRAC (CMRAC). Furthermore, it exhibits an 86.7% faster rise time compared to Self-Tuning Fuzzy PID (STFPID). These results confirm that the proposed Dual-Loop structure effectively mitigates the classic adaptability–robustness trade-off, offering a stable and high-performance solution for industrial actuators under varying operating conditions. Full article

Geological storage of carbon dioxide in faulted sedimentary basins requires suitability evaluation methods that can address uncertainty, indicator interaction, and limited data availability. This study develops an integrated evaluation framework that combines the Analytic Hierarchy Process, triangular fuzzy numbers, and the Choquet fuzzy integral to assess basin-scale geological carbon dioxide storage suitability. The framework enables structured weight determination, explicit representation of expert uncertainty, and non-additive aggregation of interacting indicators. The evaluation focuses on deep saline aquifers in the Jianghan Basin and is based on seventeen indicators covering geological, structural, hydrogeological, and socio-economic conditions. The assessment integrates seismic interpretation, geological mapping, logging data, and published datasets, and is conducted at the level of tectonic units to support basin-scale screening. The method is applied to the Jianghan Basin using seventeen geological, structural, hydrogeological, and socio-economic indicators. The results indicate that burial depth primarily acts as a threshold condition, whereas caprock sealing capacity, fault system development, and hydrogeological stability dominate suitability differentiation. Interaction analysis reveals pronounced substitution effects among geological indicators, indicating that strong performance in key safety-related factors can compensate for less favorable secondary constraints during early-stage screening. The Qianjiang Sag and Jiangling Sag are identified as the most suitable storage units. The proposed framework provides a transparent and robust tool for basin-scale screening in structurally complex, data-limited sedimentary basins. Full article

Background: Cold chain distribution in Agri-Biotech supply chains faces serious challenges due to strict time windows, high temperature sensitivity, and conflict between different operational objectives, and conventional static approaches are unable to address these complexities. Methods: In this study, an integrated decision support framework is presented that combines multi-objective fuzzy modeling and an adaptive digital twin to simultaneously manage logistics costs, product quality degradation, and service time compliance under operational uncertainty. Key uncertain parameters are modeled using triangular fuzzy numbers, and the digital twin dynamically updates the decision parameters based on operational information. The proposed framework is evaluated using real industrial data and comprehensive computational experiments. Results: The results show that the proposed approach is able to produce stable and balanced solutions, provides near-optimal performance in benchmark cases, and is highly robust to demand fluctuations and temperature deviations. Digital twin activation significantly improves the convergence behavior and stability of the solutions. Conclusions: The proposed framework provides a reliable and practical tool for adaptive planning of cold chain distribution in Agri-Biotech industries and effectively reduces the gap between advanced optimization models and real-world operational requirements. Full article