Search Results (33)

Mushroom mycelium-based biomaterials are eco-friendly, biodegradable, cheap, and sustainable materials. In this study, ten wild mushroom species were collected from tropical forests in Chiang Mai and Chiang Rai provinces, and two commercial mushroom species were obtained from a local market in Chiang Rai Province, Thailand. Mushroom specimens were identified based on morphological characteristics and phylogenetic analysis of the internal transcribed spacer (ITS) region. All fungal species were determined to use suitable agar media (potato dextrose agar; malt extract agar), liquid media (malt extract broth), and agricultural substrate (rubber sawdust size ≤ 2 mm) for mushroom mycelial growth. Mechanical property evaluation using Ashby’s chart indicated that the resulting mushroom mycelium-based biomaterials have the potential to substitute for certain types of synthetic foam. A biodegradability test was conducted through soil burial of samples for 90 days, which demonstrated cumulative weight loss exceeding 60%, thereby confirming biodegradability. Furthermore, a new approach for maintaining mycelial viability was developed and validated, addressing the challenge of maintaining vigorous mycelium. Notably, this study presents the first comprehensive report on the application of Coriolopsis brunneoleuca, Ganoderma tropicum, Hexagonia sp., Microporus xanthopus, Trametes polyzona, and T. sanguinea in mushroom mycelium-based biomaterial production, including material development, characterisation, and prototype fabrication. Based on the material properties and successfully developed prototypes, the mushroom mycelium-based biomaterials produced in this study are potentially suitable for applications in packaging, indoor products, construction, and insulation purposes, as a viable alternative to conventional synthetic materials. Full article

Mycelium-based composites (MBCs\) are formed from lignocellulosic substrates and biopolymer matrices derived from fungal mycelium. Due to their low fossil energy demand and biodegradability, MBCs represent a versatile and sustainable material suitable for a range of applications, with increasing interest focused on packaging. Hemp fibers are an example of natural fibers with great promise as a substrate to improve the mechanical properties of MBCs. However, the separation of bast and hurd fiber requires processing and commercial-scale facilities that are logistically challenging and may be cost-prohibitive. Here, the potential for minimally processed hemp, with no separation of fibers, is evaluated for the first time to demonstrate feasibility as a substrate for MBCs. Screening included different fiber ratios combined with three different, locally available mushroom strains, which are among the most common in MBC research. The resulting MBCs were tested as an alternative to environmentally harmful expanded polystyrene (EPS, or polystyrene foam), with a focus on compressive strength to reflect load-bearing performance. Some MBCs revealed mechanical performance that met or exceeded EPS, demonstrating the utility of minimally processed hemp fiber in biocomposites for safer packaging. Full article

The growing demand for sustainable cosmetic products and the rapid expansion of the pet care market have driven the search for environmentally friendly, safe, and effective alternatives to conventional formulations. In this study, an ecofriendly solid shampoo for pets was developed using exclusively natural ingredients and a microbial biosurfactant produced by Starmerella bombicola ATCC 22214 as a surface-active component. The biosurfactant was combined with renewable anionic and nonionic surfactants, conditioning agents, natural oils and butters, and minimal water content to obtain a compact, solid formulation. The shampoo was produced through a controlled multi-phase process and subsequently characterized by physicochemical, microbiological, toxicological, and performance analyses. The formulation exhibited stable pH values suitable for pet skin, low moisture content, absence of free alkalinity, high solid content, and satisfactory foaming capacity. Cleaning efficiency tests demonstrated effective removal of artificial sebum from pet fur while preserving softness and shine. Microbiological assays confirmed the absence of bacterial and fungal contamination, and toxicological evaluations revealed no cytotoxicity and low eye irritation potential. In addition, the shampoo showed 100% biodegradability and maintained physicochemical and organoleptic stability over six months of storage. Overall, the results demonstrate that the developed solid shampoo represents an innovative, safe, and biodegradable alternative that reduces water consumption and plastic packaging, contributing to sustainable development in the pet cosmetics sector. Full article

Mushroom mycelium-based biomaterials (MMBs) are sustainable materials derived from fungal species and lignocellulosic substrates. In this study, fresh specimens of Panus ciliatus and P. subfasciatus collected from mixed deciduous forests in Chiang Rai Province, Thailand, were identified through a combination of morphological characteristics and phylogenetic analyses based on the ITS region. Panus ciliatus is reported as a new geographical record from Thailand. This is the first comprehensive study on MMB samples developed using mycelia of these species and rubber sawdust for their physical, mechanical, hydrodynamic, and chemical properties. Additional analyses included FTIR spectroscopy, thermogravimetric analysis, flammability testing, and soil burial degradability. Based on the material properties and successfully developed prototypes, the MMBs are potential in packaging, indoor uses, construction, and insulation purposes, as an alternative to conventional synthetic materials. Notably, Ashby chart of mechanical properties showed the MMB could substitute foam. Thermogravimetric analysis of MMB showed thermal stability with weight loss approximately 50–60% at 293–298 °C. Soil burial of MMB for 90 days shows cumulative weight loss exceeding 60% proving biodegradable. Additionally, a new approach for mycelial viability maintenance is described and verified, addressing the problem to maintain vigorous mycelium. Full article

Mycelium-based composites (MBCs) are an emerging category of cost-effective and environmentally sustainable materials that are attracting significant research and commercial interest across various industries, including construction, manufacturing, agriculture, and biomedicine. These materials harness the natural growth of fungi as a low-energy bio-fabrication method, converting abundant agricultural by-products and waste into sustainable alternatives to energy-intensive synthetic construction materials. Their affordability and eco-friendly characteristics make them attractive for both research and commercialisation. Currently, mycelium-based foams and sandwich composites are being actively developed for applications in construction. These materials offer exceptional thermal insulation, excellent acoustic absorption, and superior fire safety compared to conventional building materials like synthetic foams and engineered wood. As a result, MBCs show great potential for applications in thermal and acoustic insulation. However, their foam-like mechanical properties, high water absorption, and limited documentation of material properties restrict their use to non- or semi-structural roles, such as insulation, panelling, and furniture. This paper presents a comprehensive review of the fabrication process and the factors affecting the production and performance properties of MBCs. It addresses key elements such as fungal species selection, substrate choice, optimal growth conditions, dehydration methods, post-processing techniques, mechanical and physical properties, termite resistance, cost comparison, and life cycle assessment. Full article

In this study, we explored the development and characterization of fungus-immobilized foamed bacterial cellulose (FBC) scaffolds using Pleurotus ostreatus and Aspergillus oryzae. FBC, a porous biomaterial with high structural integrity and resistance to enzymatic degradation, served as a three-dimensional matrix for fungal cultivation. The results indicated effective fungal immobilization, with the 1% A. oryzae-immobilized FBC group (FBC/1A) achieving the highest production yield. The water content (97%) and swelling behavior (95.9%) analyses revealed that P. ostreatus-immobilized FBC maintained high hydration levels and rehydration capacities, whereas A. oryzae immobilization led to slightly reduced water retention. Morphological assessments via SEM confirmed the presence of fungal-derived fibers integrated with native cellulose structures, suggesting successful immobilization. A thermogravimetric analysis demonstrated enhanced thermal stability in fungus-immobilized FBC, particularly in the A. oryzae group, while FTIR spectra suggested possible structural alterations induced by fungal activity. Collectively, these findings support the potential of fungal-immobilized FBC as a robust, biodegradable material with promising applications in biotechnology and sustainable material development. Full article

Three fungal strains were employed for the stereoselective oxidation of the cheap and commercially available substrate 2-phenylethanol, which resulted in chiral building blocks being received. The whole-cell biocatalysts were as follows: Beauveria bassiana DSM 1344, Beauveria brongniartii DSM 6651, and Rhizopus arrhizus DSM 1185. The main product of Beauveria bassiana bioconversion was 1-phenylethane-1,2-diol, obtained, depending on the form of the biocatalyst, as an R-enantiomer (e.g., 99.9%) with fresh biomass application or as a racemic mixture in cases of immobilization in agar-agar. The best and most innovative results for the synthesis of the R-enantiomer of diol were received under precisely defined conditions as a result of a scaling study conducted on an automatic batch reactor. This is a pioneering result, since, in previous studies, fresh mycelium of Aspergillus niger resulted in this product being received as the (S) enantiomer. Also, the use of Rhizopus arrhizus DSM 1185 (immobilized in polyurethane foams) presented important results, as the bioconversion of phenyl ethanol led, indeed, to the racemic mixture of 1-phenylethane-1,2-diol but was accompanied by a noticeable tyrosol synthesis, which had not been reported previously. Full article

Plant protein ingredients are gaining attention for human nutrition, yet they differ significantly from animal proteins in functionality and nutrition. Fungal solid-state fermentation (SSF) can modulate the composition and functionality, increasing their applicability in foods. Quinoa flour (QF) served as a substrate for Aspergillus oryzae and Rhizopus oligosporus, resulting in two fermented ingredients (QFA and QFR) with different nutritional, functional, and aroma characteristics. A higher increase in protein (+35%) and nitrogen (+24%) was observed in the QFA, while fat was predominantly increased in the QFR (+78%). Fermentable oligo-, di-, monosaccharides and polyols (FODMAPs) decreased in the QFR but increased in the QFA due to polyol production. Metabolomic analysis revealed higher lactic acid concentrations in the QFA, and higher citric, malic, and fumaric acid contents in the QFR. The SSF reduced most antinutrients, while R. oligosporus produced saponins. Olfactometry showed the development of fruity ester compounds and a decrease in metallic and cardboard aromas. Both ingredients showed an enhanced water-holding capacity, with the QFA also demonstrating an increased oil-holding capacity. Complex formation increased the particle size, reduced the solubility, and decreased the foaming properties. Mycelium production darkened the ingredients, with the QFR having a higher differential colour index. This study highlights the potential of SSF to produce ingredients with improved nutritional, sensory, and functional properties. Full article

Plastic pollution of the ocean is a major environmental threat. In this context, a better understanding of the microorganisms able to colonize and potentially degrade these pollutants is of interest. This study explores the colonization and biodegradation potential of fungal communities on foamed polystyrene and alternatives biodegradable plastics immersed in a marina environment over time, using the Brest marina (France) as a model site. The methodology involved a combination of high-throughput 18S rRNA gene amplicon sequencing to investigate fungal taxa associated with plastics compared to the surrounding seawater, and a culture-dependent approach to isolate environmentally relevant fungi to further assess their capabilities to utilize polymers as carbon sources. Metabarcoding results highlighted the significant diversity of fungal communities associated with both foamed polystyrene and biodegradable plastics, revealing a dynamic colonization process influenced by the type of polymer and immersion time. Notably, the research suggests a potential for certain fungal species to utilize polymers as a carbon source, emphasizing the need for further exploration of fungal biodegradation potential and mechanisms. Full article

Microplastics (MPs), as an emerging persistent pollutant, exist and accumulate in the environment, which has garnered them considerable global attention. While the origin, dispersion, distribution, and impact of MPs have been extensively documented, the characterization and removal strategies for MPs present ongoing challenges. In this literature review, we introduce in detail the advantages and disadvantages of seven characterization methods, from macroscopic to microscopic, from visual observation to microscopic characterization, and discuss their scope of application. In addition, 12 treatment schemes were summarized from the three treatment directions of physics, chemistry, and biology, including filtration, adsorption, extraction, magnetic separation, oil film separation, Fenton oxidation, electrochemical oxidation, persulfate advanced oxidation, photocatalytic oxidation, coagulation, electrocoagulation, foam flotation, anaerobic–anoxic–aerobic activated sludge, enzymatic degradation, bacterial degradation, and fungal degradation. Additionally, we present a critical assessment of the advantages and drawbacks associated with these removal strategies. Building upon the findings of our research team, we propose a novel approach to degrade MPs, which combines three-dimensional electrocatalytic oxidation technology with persulfate advanced oxidation technology. This advanced oxidation technology achieves 100% degradation of antibiotics in water, can degrade large molecules into environmentally harmless small molecules, and should also be a very good strategy for the degradation of MPs. Compared with two-dimensional electrocatalytic technology, the degradation efficiency is higher and the degradation cost is lower This review intends to propel further advancements for addressing the issue of MP pollution. Full article

Nosocomial infections represent a major threat within healthcare systems worldwide, underscoring the critical need for materials with antimicrobial properties. This study presents the development of polyurethane foam embedded with silver nanoparticles (PUF/AgNPs) using a rapid, eco-friendly, in situ radiochemical synthesis method. The nanocomposites were characterized by UV–vis and FTIR spectroscopy, scanning electron microscopy coupled with energy dispersive X-ray technique (SEM/EDX), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), tensile and compression strengths, antimicrobial activity, and foam toxicity tests. The resulting PUF/AgNPs demonstrated prolonged stability (over 12 months) and good dispersion of AgNPs. Also, the samples presented higher levels of hardness compared to samples without AgNPs (deformation of 1682 µm for V1 vs. 4307 µm for V0, under a 5 N force), tensile and compression strength of 1.80 MPa and 0.34 Mpa, respectively. Importantly, they exhibited potent antimicrobial activity against a broad range of bacteria (including Pseudomonas aeruginosa, Staphylococcus aureus, Escherichia coli, and Enterococcus faecalis) and a fungal mixture (no fungal growth on the sample surface was observed after 28 days of exposure). Furthermore, these materials were non-toxic to human keratinocytes, which kept their specific morphology after 24 h of incubation, highlighting their potential for safe use in biomedical applications. We envision promising applications for PUF/AgNPs in hospital bed mattresses and antimicrobial mats, offering a practical strategy to reduce nosocomial infections and enhance patient safety within healthcare facilities. Full article

Modern efforts to influence materials science with principles of biology have allowed fungal mycelial materials to take a foothold and develop novel solutions for the circular bioeconomy of tomorrow. However, recent studies have shown that the value of tomorrow’s green materials is not determined simply by their environmental viability, but rather by their ability to make the polluting materials of today obsolete. With an inherently strong structure of chitin and β-glucan, the ever-adaptable mycelia of fungi can compete at the highest levels with a litany of materials from leather to polyurethane foam to paper to wood. There are significant efforts to optimize pure mycelial materials (PMMs) through the entire process of species and strain selection, mycelial growth, and fabrication. Indeed, the promising investigations of novel species demonstrate how the diversity of fungi can be leveraged to create uniquely specialized materials. This review aims to highlight PMMs’ current trajectory, evaluate the successes in technology, and explore how these new materials can help shape a better tomorrow. Full article

Mycelium-based bio-composites (MBCs) represent a sustainable and innovative material with high potential for contemporary applications, particularly in the field of modern interior design. This research investigates the fabrication of MBCs for modern interior materials using agro-industrial wastes (bamboo sawdust and corn pericarp) and different fungal species. The study focuses on determining physical properties, including moisture content, shrinkage, density, water absorption, volumetric swelling, thermal degradation, and mechanical properties (bending, compression, impact, and tensile strength). The results indicate variations in moisture content and shrinkage based on fungal species and substrate types, with bamboo sawdust exhibiting lower shrinkage. The obtained density values range from 212.31 to 282.09 kg/m³, comparable to traditional materials, suggesting MBCs potential in diverse fields, especially as modern interior elements. Water absorption and volumetric swelling demonstrate the influence of substrate and fungal species, although they do not significantly impact the characteristics of interior decoration materials. Thermal degradation analysis aligns with established patterns, showcasing the suitability of MBCs for various applications. Scanning electron microscope observations reveal the morphological features of MBCs, emphasizing the role of fungal mycelia in binding substrate particles. Mechanical properties exhibit variations in bending, compression, impact, and tensile strength, with MBCs demonstrating compatibility with traditional materials used in interior elements. Those produced from L. sajor-caju and G. fornicatum show especially promising characteristics in this context. Particularly noteworthy are their superior compression and impact strength, surpassing values observed in certain synthetic foams multiple times. Moreover, this study reveals the biodegradability of MBCs, reaching standards for environmentally friendly materials. A comprehensive comparison with traditional materials further supports the potential of MBCs in sustainable material. Challenges in standardization, production scalability, and market adoption are identified, emphasizing the need for ongoing research, material engineering advancements, and biotechnological innovations. These efforts aim to enhance MBC properties, promoting sustainability in modern interior applications, while also facilitating their expansion into mass production within the innovative construction materials market. Full article

When replanting an asparagus field, the roots of the previous crop are crushed and incorporated into the soil, creating problems of autotoxicity and fungal infections. Asparagus roots can be considered as a valuable byproduct, since they are very rich in saponins (3–6%), compounds currently considered as bio-emulsifiers. The objective is to evaluate the emulsifying and foaming capacity of a saponin extract from asparagus roots (ARS) and compare it with other commercial extracts. ARS was obtained using a process patented by our research group. The results have shown that ARS has activity similar to Quillaja extract. Its critical micellar concentration falls between that of Quillaja and Tribulus extracts (0.064, 0.043, and 0.094 g/100 mL, respectively). Both emulsifying and foaming activities are affected by pH, salt, and sucrose to a similar extent as the other extracts. Additionally, it has demonstrated an inhibitory effect on pancreatic lipase, which is even better than the other two studied extracts, as indicated by its IC₅₀ value (0.7887, 1.6366, and 2.0107 mg/mL for asparagus, Quillaja, and Tribulus, respectively). These results suggest that ARS could serve as a natural emulsifying/foaming agent for healthier and safer food products and as a potential aid in treatments for obesity and hyperlipidemia. Full article

Biodiversity in ecosystems is threatened by plastic waste, a significant pollution problem. The research aims to use plastic, Pleorotus ostreatus mycelium, and sugarcane bagasse to develop an eco-friendly biomaterial. The preparation consisted of three phases: (1) Treatment of the underlying layer, (2) inoculation of the fungus (three different concentrations: 15%, M1; 20%, M2; and 25%, M3), and (3) dehydration of the biomaterial. The physical characterization results (density, water absorption, and texture) showed that the average density varies between 127.86 and 131.19 kg/m³; also, the M1 sample had a high percentage of water absorption (23.55%), while M2 obtained lower percentages (11.79%). In the bending test, samples M2 and M3 showed higher structural resistance with stress values of 0.682 and 0.68 MPa, respectively. Based on the results, the produced biomaterials may serve as an alternative to expanded polystyrene (EPS). Due to their moldable characteristics, they can be used in non-structural construction, packaging, and various architectural applications. The research provided promising results; however, additional parameters must be evaluated to be able to commercialize them. Full article