Search Results (16)

This study explores the feasibility of constructing a microwave kiln for artisanal ceramics using accessible materials and homemade susceptors. Two modified microwave ovens (18 L and 50 L) were equipped with insulation and susceptors to achieve temperatures up to 1280 °C. Susceptors were fabricated from silicon carbide (SiC) and magnetite (Fe₃O₄) powders via microwave-assisted reactive sintering. Magnetite-poor susceptors (SiC/Fe₃O₄ > 2 by weight) demonstrated excellent durability, maintaining stable thermal performance over multiple cycles. In contrast, magnetite-rich susceptors (SiC/Fe₃O₄ ∼ 1) exhibited high initial efficiency and the ability to control redox conditions but degraded significantly after 10–15 cycles due to partial melting. The microwave kiln achieved significant time savings, completing the ramp-up of the firing cycles in 1 h, compared to 8–10 h in conventional kilns. Energy consumption per litre was comparable to large electric kilns but significantly lower than small ones. The fired ceramics, including porcelain and earthenware, showed excellent mechanical and aesthetic qualities, with glazes performing well even at lower temperatures than recommended. The study highlights the advantages of microwave heating, such as faster processing, energy efficiency, and the ability to control redox conditions, which mimic traditional gas-fired kilns. The developed susceptors are cost-effective and easy to manufacture, making this approach accessible to craftspeople and amateurs. While magnetite-rich susceptors enable redox control, their limited lifespan requires further optimisation. This work demonstrates the potential of microwave kilns for artisanal ceramics, offering flexibility, efficiency, and quality comparable to traditional methods, with promising applications for unique or small-scale production. Future research should focus on refining susceptors durability and validating redox control effects on ceramic glazes. Full article

Power system flexibility is becoming increasingly critical in modern power systems due to the quick switch from fossil fuel-based power generation to renewables, old-fashioned infrastructures, and a sharp rise in demand. If a power system complies with financial restrictions and responds quickly to unforeseen shifts in supply and demand, it can be considered flexible. It can ramp up production during periods of high demand or increase it during unanticipated or scheduled events. The broad use of renewable energy in the power grid can provide environmental and economic benefits; nevertheless, renewables are highly stochastic in nature, with variability and uncertainty. New management with adequate planning and operation in the power system is necessary to address the challenges incorporated with the penetration of renewable energy. The primary aim of this review is to provide a comprehensive overview of power system flexibility, including appropriate definitions, parameters, requirements, resources, and future planning, in a compact way. Moreover, this paper potentially addresses the effects of various renewable penetrations on power system flexibility and how to overcome them. It also presents an emerging assessment and planning of influential flexibility solutions in modern power systems. This review’s scientific and engineering insights provide a clear vision of a smart, flexible power system with promised research direction and advancement. Full article

This study investigated non-instantaneous deteriorating items because not all products deteriorate immediately. In the high-tech product life cycle, the product demand increases linearly substantially in the growth stage and maintains a near-constant level in the maturity stage. This is a ramp-type demand rate. To satisfy the demand as shortages occur, partial backlogging is necessary. The advance-cash-credit payment scheme, comprising advance, cash, and credit payments, has gained popularity in business transactions to improve cash flow flexibility among supply chain participants. This study explored a partial backlogging inventory model with ramp-type demand for non-instantaneous deteriorating items under generalized payment. The proposed model also incorporated discounted cash flow analysis to account for the time value of the profit function. This study attempted to determine the optimal replenishment strategy to maximize the present value of the total profit. Finally, we conducted a sensitivity analysis to examine the efficacy of the proposed model and gain managerial insights. The optimal total profit rises with an increase in the permissible delay period and sale price but decreases with an increase in ordering and purchase costs. Then, the decision-maker can refer to the managerial insights to choose the appropriate parameter value for the operation. Full article

The increasing utilisation of the distribution grid caused by the ramp-up of electromobility and additional electrification can be eased with flexibility through smart and bidirectional charging use cases. Implementing market-oriented, grid-, and system-serving use cases must be tailored to the different national framework conditions, both in technical and regulatory terms. This paper sets out an evaluation methodology for assessing the implementation of smart and bidirectional charging use cases in different countries. Nine use cases are considered, and influencing factors are identified. The evaluation methodology and detailed analysis are applied to Austria, the Czech Republic, Denmark, Finland, France, Germany, Italy, the Netherlands, Spain, and Sweden. In every country, the implementation of vehicle-to-home use cases is possible. Realising market-oriented use cases is feasible in countries with a completed smart meter rollout and availability of tariffs with real-time pricing. Grid-serving and ancillary service use cases depend most on country-specific regulation, which is why no clear trend can be identified. Use cases that require direct remote controllability are the most distant from implementation. The overarching analysis provides orientation for the design of transnational products and research and can serve as a basis for a harmonisation process in regulation. Full article

A high proportion of renewable energy access makes the net load of the power system volatile and uncertain, increasing the demand for the ramping capacity of the power system. Traditional electricity spot markets compensate for the power imbalances caused by an insufficient ramping capacity through traditional flexibility services such as ancillary services and interconnection power. However, conventional flexibility services may lead to frequency deviations in the power system, increased response costs, spikes in electricity prices, and dramatic price volatility in the traditional spot market. To solve the above problems, this paper proposes an FRP and convex electricity spot market joint clearing (FCESMJC) market mechanism. The FCESMJC model can more accurately represent the relationship between electrical power output and the price of electricity and reduces the number of spikes in electricity prices. In addition, a novel FRP pricing method is proposed to compensate FRP market participants for their FRP costs more reasonably. Additionally, the difference in system performance is provided by comparing the energy prices, pricing method, clearing prices, and system costs in the FCESMJC method and the traditional electricity spot market. The FCESMJC system reduces the total system cost by 18.6% compared with the electricity spot market. Numerical experiments are simulated on the IEEE 14-bus test system to validate the superiority of the proposed model. Full article

Virtual power plants (VPPs) offer a feasible solution for integrating various types of distributed energy resources (DERs) into the power grid in the electricity market. This paper proposes a multi-time-scale rolling optimal scheduling for VPPs, enabling optimal self-scheduling plans across intra-week rolling scheduling, intra-day rolling dispatch, and real-time dispatch. The proposed method facilitates participation in energy and flexible ramping product (FRP) markets while considering the specific characteristics with complementary advantages for the aggregated renewable resources, gas turbines, energy storages, and flexible demands of each time scale. The flexible ramping products within the VPP framework are established, while the energy storage systems address fluctuations during dispatch periods. Case studies are conducted to verify the efficiency of the proposed method. The results show that the proposed method can obtain optimal self-scheduling plans within the multi-time framework and has better performance in economy and security operation in comparisons among cases. Full article

The rapid growth in greenhouse gases (GHGs), the lack of electricity production, and an ever-increasing demand for electrical energy requires an optimal reduction in coal-fired thermal generating units (CFTGU) with the aim of minimizing fuel costs and emissions. Previous approaches have been unable to deal with such problems due to the non-convexity of realistic scenarios and confined optimum convergence. Instead, meta-heuristic techniques have gained more attention in order to deal with such constrained static/dynamic economic emission load dispatch (ELD/DEELD) problems, due to their flexibility and derivative-free structures. Hence, in this work, the elephant herd optimization (EHO) technique is proposed in order to solve constrained non-convex static and dynamic ELD problems in the power system. The proposed EHO algorithm is a nature-inspired technique that utilizes a new separation method and elitism strategy in order to retain the diversity of the population and to ensure that the fittest individuals are retained in the next generation. The current approach can be implemented to minimize both the fuel and emission cost functions of the CFTGUs subject to power balance constraints, active power generation limits, and ramp rate limits in the system. Three test systems involving 6, 10, and 40 units were utilized to demonstrate the effectiveness and practical feasibility of the proposed algorithm. Numerical results indicate that the proposed EHO algorithm exhibits better performance in most of the test cases as compared to recent existing algorithms when applied to the static and dynamic ELD issue, demonstrating its superiority and practicability. Full article

This study describes a world of new carbon “fullerene” allotropes that may be synthesized by molten carbonate electrolysis using greenhouse CO₂ as the reactant. Beyond the world of conventional diamond, graphite and buckyballs, a vast array of unique nanocarbon structures exist. Until recently, CO₂ was thought to be unreactive. Here, we show that CO₂ can be transformed into distinct nano-bamboo, nano-pearl, nano-dragon, solid and hollow nano-onion, nano-tree, nano-rod, nano-belt and nano-flower morphologies of carbon. The capability to produce these allotropes at high purity by a straightforward electrolysis, analogous to aluminum production splitting of aluminum oxide, but instead nanocarbon production by splitting CO₂, opens an array of inexpensive unique materials with exciting new high strength, electrical and thermal conductivity, flexibility, charge storage, lubricant and robustness properties. Commercial production technology of nanocarbons had been chemical vapor deposition, which is ten-fold more expensive, generally requires metallo-organics reactants and has a highly carbon-positive rather than carbon-negative footprint. Different nanocarbon structures were prepared electrochemically by variation of anode and cathode composition and architecture, electrolyte composition, pre-electrolysis processing and current ramping and current density. Individual allotrope structures and initial growth mechanisms are explored by SEM, TEM, HAADF EDX, XRD and Raman spectroscopy. Full article

It is widely believed that the incorporation of renewable energy to the current power grid is the way forward in achieving sustainable power generation. Currently, with the reduction of PV prices, many countries have started connecting PV systems into their grid network, hence leading to a sharp increase of the penetration levels of renewable electricity production. This will bring significant change in the load pattern and the ramping requirements of the grid’s conventional generation system due to the varying nature of the renewable energy generation. This significant change affects the stability of the grid frequency because it becomes more challenging for the system operators to maintain the equilibrium between the generation and load. Additionally, this significant change affects the PV system potential hosting capacity of the traditional grid because of the PV system’s curtailment in order to comply with the constraints of the grid’s conventional generation system. In this paper, the net load, grid frequency stability, and grid potential hosting capacity are evaluated in the situation of increasing the penetration level of large-scale PV systems generation into the grid. The results show that the grid operators will face increasingly variable net load patterns and steeper ramping events as the PV system penetration level increases. Additionally, the results show the requirement of having flexibility measures that target each grid constraint as the PV system penetration level increases. Full article

Since the widespread deployment of non-dispatchable, intermittent, and highly variable power production from renewable energy sources (RES), the demand for flexible power production has been steadily growing. As new-built dispatchable power plants have not been very quickly adapted to the emerging flexible operation, this task has been addressed by existing plants as well. Existing solid-fuel thermal power plants have undergone an extensive study to increase their flexible operation. Thermodynamic process-modeling tools have been extensively used for plant modeling. Steady- and transient-state simulations have been performed under various operating regimes, supplying valuable results for efficient power-plant operation. Flexibility aspects regarding low-load operation and steady operational conditions are mostly investigated with steady-state simulations. Flexibility aspects related to variation over time such as ramping rates are investigated with transient simulations. The off-design operation is mainly attributed to the existing fleet of power plants, struggling to balance between their former operational schemes as base and/or medium-load plants. However, off-design operation is also considered for new plants in the design phase and is included as a simulation aspect. Process modeling turns out to be a proven tool for calculating plant flexibility and predicting extreme operating conditions, defining further steps for a new operational scheme, drafting accident mitigation control procedures or, furthermore, provisioning more complex and cross-field future tasks. A review of the off-design aspect as a simulation approach is undertaken and presented in this work. Finally, challenges and future perspectives for this aspect of solid-fuel thermal power plants are discussed. Full article

Continuous manufacturing (CM) is a promising strategy to achieve various benefits in the context of quality, flexibility, safety and cost in pharmaceutical production. One of the main technical challenges of CM is that the process needs to handle transient conditions such as the start-up phase before state of control operation is reached, which can potentially cause out-of-specification (OOS) material. In this context, the presented paper aims to demonstrate that suitable process control strategies during start-up of a continuous granulation and drying operation can limit or even avoid OOS material production and hence can ensure that the provided benefits of CM are not compromised by poor production yields. In detail, heat-up of the drying chamber prior the start of production can lead to thermal energy being stored inside of the stainless-steel housing, acting as an energy buffer that is known to cause over-dried granules in the first few minutes of the drying process. To compensate this issue, an automatic ramping procedure of dryer rotation speed (and hence drying time) was introduced into the plant’s process control system, which counteracts the excessive drying capacity during start-up. As a result, dry granules exiting the dryer complied with the targeted intermediate critical quality attribute loss-on-drying (LOD) from the very beginning of production. Full article

The integration of numerous intermittent renewable energy sources (IRESs) poses challenges to the power supply-demand balance due to the inherent intermittent and uncertain power outputs of IRESs, which requires higher operational flexibility of the power system. The deployment of flexible ramping products (FRPs) provides a new alternative to accommodate the high penetration of IRESs. Given this background, a bi-level risk-limiting real-time unit commitment/real-time economic dispatch model considering FRPs provided by different flexibility resources is proposed. In the proposed model, the objective is to maximize the social surplus while minimizing the operational risk, quantified using the concept of conditional value-at-risk (CVaR). Energy and ramping capabilities of conventional generating units during the start-up or shut-down processes are considered, while meeting the constraints including unit start-up/shut-down trajectories and ramping up/down rates in consecutive time periods. The Karush–Kuhn–Tucker (KKT) optimality conditions are then used to convert the bi-level programming problem into a single-level one, which can be directly solved after linearization. The modified IEEE 14-bus power system is employed to demonstrate the proposed method, and the role of FRPs in enhancing the system flexibility and improving the accommodation capability for IRESs is illustrated in some operation scenarios of the sample system. The impact of the confidence level in CVaR on the system operational flexibility is also investigated through case studies. Finally, a case study is conducted on a regional power system in Guangdong Province, China to demonstrate the potential of the proposed method for practical applications. Full article

Peak-operating hydropower plants are usually the energy grid’s backbone by providing flexible energy production. At the same time, hydropeaking operations are considered one of the most adverse impacts on rivers, whereby aquatic organisms and their life-history stages can be affected in many ways. Therefore, we propose specific seasonal regulations to protect ecologically sensitive life cycle stages. By reviewing hydropeaking literature, we establish a framework for hydrological mitigation based on life-history stages of salmonid fish and their relationship with key parameters of the hydrograph. During migration and spawning, flows should be kept relatively stable, and a flow cap should be implemented to prevent the dewatering of spawning grounds during intragravel life stages. While eggs may be comparably tolerant to dewatering, post-hatch stages are very vulnerable, which calls for minimizing or eliminating the duration of drawdown situations and providing adequate minimum flows. Especially emerging fry are extremely sensitive to flow fluctuations. As fish then grow in size, they become less vulnerable. Therefore, an ‘emergence window’, where stringent thresholds on ramping rates are enforced, is proposed. Furthermore, time of day, morphology, and temperature changes must be considered as they may interact with hydropeaking. We conclude that the presented mitigation framework can aid the environmental enhancement of hydropeaking rivers while maintaining flexible energy production. Full article

The increasing deployments of renewable generation methods, such as wind, affects the flexibility of electric power system operating due to their inherent variability and uncertainty. To mitigate this, power systems need flexible resources. This paper investigates the potential for wind power to provide flexible ramping products in the real-time market, an additional value stream to the energy it provides. The proposed model for wind power’s strategic offering is formulated as a bi-level optimization problem with wind profit maximization at the upper level and the independent system operator’s economic dispatch—considering both the energy balance and the flexible ramping requirement to counter uncertainty—at the lower level. This bi-level model is converted to a mathematical program with equilibrium constraints (MPEC) by recasting the lower level problem with its Karush–Kuhn–Tucker optimality conditions. Then, through strong duality theory and the big-M method, the MPEC model is converted to a mixed-integer linear programming model. The opportunity cost and the price for wind power-providing ramping products are analyzed. Numerical examples based on a 5-bus network are presented to verify the proposed model and concept. Full article

To cope with the net load variability in real time, sufficient ramp capability from controllable resources is required. To address the issue of insufficient ramp capacity in real time operations, flexible ramping products (FRPs) have been adopted by some Independent System Operators (ISOs) in the USA as a new market design. The inherent variability and uncertainty caused by renewable energy sources (RESs) call for new FRP providers apart from conventional generating units. The so-called interruptible load (IL) has proved to be useful in maintaining the supply-demand balance by providing demand relief and can be a viable FRP provider in practice. Given this background, this work presents a stochastic real-time unit commitment model considering ramp requirement and simultaneous provision of IL for FRP and demand relief. Load serving entities (LSEs) are included in the proposed model and act as mediators between the ISO and multiple ILs. In particular, incentive compatible contracts are designed to encourage customers to reveal their true outage costs. Case studies indicate both the system and LSEs can benefit by employing the proposed method and ILs can gain the highest profits by signing up a favorable contract. Full article