Search Results (121)

The permanent magnet electrodynamic suspension system (PMEDS) has demonstrated significant advantages in high-speed and ultra-high-speed applications due to its simple structure, low cost, and stable levitation force. However, the weak damping characteristic remains a critical issue limiting its practical implementation. This work investigates a passive damping plate utilizing the end field of onboard magnets, focusing on magnet-damping plate optimization and vehicle dynamics. Firstly, the configuration, operation principles, and electromagnetic parameters of the PMEDS vehicle are elucidated. Secondly, the dependences of magnet-conductive plate specifications on the damping force are examined. An optimization index based on the levitation-to-damping force ratio is proposed to enable collaborative optimization of magnet and conductive plate parameters. Finally, the vehicle dynamic model is developed using Simpack software to investigate payload and speed effects on dynamic responses under random track excitation, validating the effectiveness of the proposed passive damping solution. This study provides technical references for the design, engineering applications, and performance evaluation of passive damping schemes in PMEDS vehicles. Full article

Currently, object detection-based rail fastener defect detection methods still face challenges such as limited detection categories, insufficient accuracy, and high computational complexity. To this end, the YOLOv8n-FDD, an advanced multi-category fastener defect detection model designed upon the YOLOv8n with comprehensive optimizations is developed in this paper. Concretely, by introducing the CUT-based style transfer model to generate diverse defect samples, the concern due to imbalanced distribution of sample categories is effectively alleviated. The CA mechanism is incorporated to enhance the feature extraction capability, and the bounding box loss function is further upgraded to improve the model’s generalization performance. With respect to efficiency, the Conv and c2f modules of the YOLOv8n model are, respectively, replaced with the GSConv and VoVGSPCP modules, accordingly achieving a lightweight design. Comparative experimental results demonstrate that the presented YOLOv8n-FDD model outperforms several classic object detection models in terms of detection accuracy, detection speed, model size, and computational complexity. Full article

This study conducts a comparative performance analysis of three different low-temperature solar collector systems: flat plate solar collectors (FPCs), heat pipe evacuated tube solar collectors (HPETCs), and heat pipe flat plate solar collectors (HPFPCs). Key performance parameters, such as heat transfer coefficients, useful heat, and thermal efficiency, are analyzed under varying mass flow rate, fluid temperature, and antifreeze concentration. The objective is to evaluate the thermal performance of these systems using different heat transfer fluids, specifically water, and mixtures of 30% and 50% ethylene glycol and propylene glycol. The performance data indicate that the heat transfer coefficient in the HPFPC diminishes by 28% and 41% when antifreeze is employed at concentrations of 30% and 50%, respectively. Furthermore, the integration of heat pipes with water in a flat plate solar collector results in efficiency enhancements, with respect to FPCs, of up to 13% at a fluid temperature of 30 °C, and up to 21% at 80 °C. At the elevated fluid temperature of 80 °C, an efficiency increase of 13% is observed with a 30% ethylene glycol concentration. The incorporation of heat pipes leads to an efficiency improvement of up to 6.5% in comparison to traditional flat plate solar collectors. This study highlights the significant impact of fluid properties, affecting the convective heat transfer coefficient, on the overall efficiency of solar collectors, emphasizing the importance of optimizing fluid composition and operating conditions for enhanced thermal performance. Full article

Treatment of extremely saline water such as the brine rejected from reverse osmosis water desalination plants, and produced water from shale oil and non-conventional gas extraction, is considered a global problem. Consequently, in this work, hollow fiber membrane distillation (HFMD) is experimentally evaluated for desalinating extremely saline water of a salinity ranging from 40,000 to 130,000 ppm. For the purpose of comparison, the HFMD is also tested for desalinating brackish (3000–12,000 ppm) and sea (25,000–40,000 ppm) water. Firstly, the HFMD is tested at two values of feed water temperature (65 and 76 °C) and flow rate (600 and 850 L/h). The experimental results showed that the HFMD productivity significantly increases when the temperature of feed water increases. Increasing the feed water flow rate also has a positive effect on the productivity of HFMD. It is also concluded that the productivity of the HFMD is not significantly affected by increasing the salt concentration when brackish and sea water are used. The productivity also slightly decreases with increasing the salt concentration when extremely saline water is used. The decrement in the productivity reaches 27%, when the salt concentration increases from 40,000 to 130,000 ppm. Based on the conducted economic analysis, the HFMD shows a good potential for desalinating extremely saline water especially when the solar collector is used as a heat source. In this case, the cost per liter of freshwater is reduced by 21.7–23.1% when the evacuated tube solar collectors are used compared to the system using electrical heaters. More reduction in the cost per liter of freshwater is expected when a high capacity solar-powered HFMD plant is installed. Full article

This research aims to determine the primary thermofluidic correlations describing the thermosiphon effect under idealized steady-state conditions, considering water-in-glass evacuated-tube geometry, tilt angle, and heat flux. A numerical model based on Computational Fluid Dynamics (CFD) was developed to obtain these correlations for water-in-glass evacuated-tube solar collectors. Initial validation against experimental velocity and temperature profiles was necessary. With a validated CFD model, thermofluidic correlations were determined, expressed as dimensionless parameters such as Re, Gr, and Pr, water-in-glass evacuated-tube dimensions, and tilt angle. Symmetry was exploited in the water-in-glass evacuated-tube geometry for both validation simulations and the development of thermofluidic correlations. Contrary to correlations recorded in the literature, the correlations obtained in this study indicate an increase in water flow and a decrease in mean temperature with increasing tilt angle. These correlations are crucial for the energy–exergy balance formulations used in the analysis and design of such thermal systems. Full article

The goal of this research is to examine the applicability of the Hottel–Whillier–Bliss model, developed for flat-plate collectors, to evacuated tube solar collectors. During this study, the model is applied to an evacuated tube collector, and then the identification and validation of the model are made with the help of measurements performed on the collector. This research also includes the application, identification and validation of the energy balance model for the investigated solar collector. This model works for both flat-plate and evacuated tube collectors. The results obtained with the two different models are then compared. By comparing the modelled results with the measured values, the accuracy and applicability of the models can be determined. Based on the results, the Hottel–Whillier–Bliss model works excellently with evacuated tube solar collectors for predicting the outlet temperature of the medium from the solar collector. It is important to note that the identification gives negative heat transfer parameter values. According to the validation, the average absolute error is 0.8 °C, and the average relative error is 1%. For the energy balance model, these values are 0.87 °C and 1.1% respectively, indicating that the accuracy of the Hottel–Whillier–Bliss model is very similar, and even slightly higher. Additionally, the research provides further proof of the applicability of the energy balance model to evacuated tube collectors. Full article

In the context of Concentrated Solar Power (CSP) technology, this paper presents a comparison between the Parabolic Trough Collector (PTC) and the Linear Fresnel Collector (LFC), considering both evacuated and non-evacuated receiver tubes. The comparison was carried out in terms of the Levelized Cost of Electricity (LCOE) considering a reference year and four locations in the world, characterized by different levels of direct normal irradiation (DNI) from 2183 kWh/m²/year to 3409 kWh/m²/year. The LCOE depends on economic parameters and on the net energy generated by a plant on an annual basis. The latter was determined by a steady-state 1D model that solved the energy balance along the receiver axis. This model required computing the incident solar power and heat losses. While the solar power was calculated by an optical ray-tracing model, heat losses were computed by a lumped-parameter model developed along the radial direction of the tube. Since the LFC adopted a secondary concentrator, no conventional correlation was applicable for the convective heat transfer from the glass cover to the environment. Therefore, a 2D steady-state CFD model was also developed to investigate this phenomenon. The results showed that the PTC could generate a higher net annual energy compared to the LFC due to a better optical performance ensured by the parabolic solar collector. Nevertheless, the difference between the PTC and the LFC was lower in the non-evacuated tubes because of lower heat losses from the LFC receiver tube. The economic analysis revealed that the PTC with the evacuated tube also achieved the lowest LCOE, since the higher cost with respect to both the LFC system and the non-evacuated PTC was compensated by the higher net energy yield. However, the non-evacuated LFC demonstrated a slightly lower LCOE compared to the non-evacuated PTC since the lower capital cost of the non-evacuated LFC outweighed its lower net annual energy yield. Finally, a sensitivity analysis was conducted to assess the impact on the LCOE of the annual optical efficiency and of the economic parameters. This study introduces key technical parameters in LFC technology requiring improvement to achieve the level of productivity of the PTC from a techno-economic viewpoint, and consequently, to fill the gap between the two technologies. Full article

Thoracostomy and chest tube placement are key procedures in treating pleural diseases involving the accumulation of fluids (e.g., malignant effusions, serous fluid, pus, or blood) or air (pneumothorax) in the pleural cavity. Initially described by Hippocrates and refined through the centuries, chest drainage achieved a historical milestone in the 19th century with the creation of closed drainage systems to prevent the entry of air into the pleural space and reduce infection risk. The introduction of plastic materials and the Heimlich valve further revolutionized chest tube design and function. Technological advancements led to the availability of various chest tube designs (straight, angled, and pig-tail) and drainage systems, including PVC and silicone tubes with radiopaque stripes for better radiological visualization. Modern chest drainage units can incorporate smart digital systems that monitor and graphically report pleural pressure and evacuated fluid/air, improving patient outcomes. Suction application via wall systems or portable digital devices enhances drainage efficacy, although careful regulation is needed to avoid complications such as re-expansion pulmonary edema or prolonged air leak. To prevent recurrent effusion, particularly due to malignancy, pleurodesis agents can be applied through the chest tube. In cases of non-expandable lung, maintaining a long-term chest drain may be the most appropriate approach and procedures such as the placement of an indwelling pleural catheter can significantly improve quality of life. Continued innovations and rigorous training ensure that chest tube insertion remains a cornerstone of effective pleural disease management. This review provides a comprehensive overview of the historical evolution and modern advancements in pleural drainage. By addressing both current technologies and procedural outcomes, it serves as a valuable resource for healthcare professionals aiming to optimize pleural disease management and patient care. Full article

Air conditioning is vital for indoor comfort but traditionally relies on vapor compression systems, which raise electricity demand and carbon emissions. This study presents a novel thermo-mechanical vapor compression system that integrates an ejector with a conventional vapor compression cycle, incorporating a thermally driven second-stage compressor powered by solar energy. The goal is to reduce electricity consumption and enhance sustainability by leveraging renewable energy. A MATLAB^® model was developed to analyze the energy and exergy performance using R1234yf refrigerant under steady-state conditions. This study compares four solar collectors—evacuated flat plate (EFPC), evacuated tube (ETC), basic flat plate (FPC), and compound parabolic (CPC) collectors—to identify the optimal configuration based on the collector area and costs. The results show a 31% reduction in mechanical compressor energy use and up to a 44% improvement in the coefficient of performance (COP) compared to conventional systems, with a condenser temperature of 65 °C, a thermal compression ratio of 0.8, and a heat source temperature of 150 °C. The evacuated flat plate collectors performed best, requiring 2 m²/kW of cooling capacity with a maximum exergy efficiency of 15% at 170 °C, while compound parabolic collectors offered the lowest initial costs. Overall, the proposed system shows significant potential for reducing energy costs and carbon emissions, particularly in hot climates. Full article

Background and aims: The aim of this study was to investigate the possible preanalytical effect of incomplete filling of blood tubes on molecular biology assays. Materials and methods: The study population consisted of 13 healthy volunteers from whom 11 mL of whole blood was collected and then distributed in different volumes (1.5, 3.0, and 6.0 mL, respectively) into three 6.0 mL spray-dried and evacuated K₂EDTA blood tubes. Automated RNA extraction was performed using the Maxwell^® CSC RNA Blood Kit. DNA was extracted with a MagCorePlusII, with concomitant measurement of glyceralde-hyde-3-phosphate dehydrogenase (GAPDH) gene expression. The nucleic acid concentration was calculated using the NanoDrop 1000 spectrophotometer, and purity was assessed using A260/280 and A260/230 absorbance ratios. Results: The RNA concentration was higher in the tubes filled with 1.5 and 3.0 mL of blood than in the reference 6 mL filled tube. The RNA 260/280 and RNA 260/230 ratios did not differ significantly between the differently filled blood tubes. The DNA concentration remained constant in the differently filled tubes. Compared to the 6.0 mL reference filled tube, the 1.5 mL and 3.0 mL filled blood tubes displayed a lower DNA 260/280 nm ratio. The DNA 260/230 ratio did not differ significantly in any of the variously filled tubes. Compared to the 6.0 mL reference filled blood tube, the 1.5 mL and 3.0 mL filled blood tubes showed a significant increase in the GAPDHcycle threshold. Conclusions: Our results suggest that underfilling of K₂EDTA blood tubes may be a modest but analytically significant source of bias in molecular biology testing. Full article

This study focused on assessing whether the inclusion of probiotics (B. subtilis) as feed additives during the preweaning stage can enhance the body weight and metabolic condition of neonatal calves. A total of 50 Holstein calves, all born on the same farm, were randomly divided into two homogeneous treatment groups after birth. The calves in the control group (CG) were fed a milk replacer (n = 25) (13 females and 12 males) and those in the B. subtilis-supplement-treated group (TG), (n = 25) (13 females and 12 males) were fed a milk replacer with 7.5 mL/calf/day of B. subtilis probiotic (complied with the manufacturer’s guidelines). The probiotic was administered 24 h post-birth, signifying the start of the experimental period. It took one month to collect the animals. Body weight was measured at birth for all animals. A local veterinarian, working on the farm, conducted daily health checks of the calves, recording health parameters and any antibiotic treatments. Blood samples were collected from each calf at birth and 30, 60, and 90 days by puncturing the jugular vein using 10 mL evacuated serum tubes before morning feeding. Significant differences in body weight were observed between the CG and the TG at 30, 60, and 90 days of age. At 30 days, the TG had a 4.11% higher average body weight than the CG (54.38 kg vs. 52.71 kg). At 60 days, the TG’s average weight was 3.75% higher (79.21 kg vs. 76.34 kg), and at 90 days, the TG had a 2.91% higher average weight (112.87 kg vs. 109.67 kg). At 30 days of age, the TG showed significantly lower AST activity, with a 41.12% decrease compared to the CG (51.02 IU/L vs. 72.00 IU/L). Conversely, GGT activity was significantly higher in the TG by 64.68% (40.64 IU/L vs. 14.35 IU/L). Phosphorus concentration at 30 days was also significantly higher in the TG by 9.36% (3.27 mmol/L vs. 2.99 mmol/L). Additionally, the TG had a significantly lower total protein concentration, with a 21.63% decrease at 30 days (46.32 g/L vs. 56.34 g/L) and a 20.28% decrease at 60 days (48.32 g/L vs. 58.12 g/L) compared to the CG. These findings indicate that dairy calves given conventional milk replacer along with a daily dose of 7.5 mL of B. subtilis probiotic experienced enhanced growth performance and a more favourable metabolic profile during the first 90 days of their lives. Full article

This study introduces the use of compressed air as a heat transfer fluid in small-scale, concentrated linear solar collector technology, evaluating its possible advantages over traditional fluids. This work assumes the adoption of readily available components for both linear parabolic trough and Fresnel collectors and the coupling of the solar field with Brayton cycles for power generation. The aim is to provide a theoretical analysis of the applicability of this novel solar plant configuration for small-scale electricity generation. Firstly, a lumped thermal model was developed in a MatLab^® (v. 2023a) environment to assess the thermal performance of a PT collector with an evacuated receiver tube. This model was then modified to describe the performance of a Fresnel collector. The resulting optical–thermal model was validated through literature data and appears to provide realistic estimates of temperature distribution along the entire collector length, including both the receiver tube surface and the Fresnel collector’s secondary concentrator. The analysis shows a high thermal efficiency for both Fresnel and parabolic collectors, with average values above 0.9 (in different wind conditions). Th5s study also shows that the glass covering of the Fresnel evacuated receiver, under the conditions considered (solar field outlet temperature: 550 °C), reaches significant temperatures (above 300 °C). Furthermore, due to the presence of the secondary reflector, the temperature difference between the upper and the lower part of the glass envelope can be very high, well above 100 °C in the final part of the collector string. Differently, in the case of PTs, this temperature difference is quite limited (below 30 °C). Full article

Background and Objectives: Choriocarcinoma is an aggressive oncological disease that manifests as trophoblast tissue proliferation. The vast majority of primary lesions affect the uterus, with primarily extrauterine lesions being a rarity. Choriocarcinoma with an ongoing pregnancy is extremely rare because fetuses usually do not survive the third trimester. Case Report: We present a case of heterotopic tubal choriocarcinoma coexisting with a viable intrauterine pregnancy. A 30-year-old, 39-week pregnant woman (gravida 2, para 2) came to our hospital complaining of acute upper abdominal pain. During routine prenatal screening in the first trimester, no pathological ultrasound findings were detected. Similar abdominal pain episodes had been recorded at 18, 27, and 32 weeks of gestation, when patient was hospitalized for examination and observation, but the cause of symptoms at that time of gestation remained unclear. The patient underwent an emergency caesarean section due to severe abdominal pain and fetal compromise. She delivered a live male infant. During the surgery, around 1000 mL of blood clots were evacuated, and the excision of the right fallopian tube and masses, as well as the control of significant blood loss was performed. Postoperative serum beta-hCG was elevated to 139 482 IU/L, while imaging studies showed no metastasis. The histological examination of the excised tissue samples confirmed a diagnosis of tubal choriocarcinoma. With a FIGO score of 8, the patient received three courses of the EP/EMA regimen. After more than a year, the patient showed no radiographic signs of distant metastasis and is now in complete remission. Conclusions: This case highlights the diagnostic complexity of such extremely rare scenarios. Even though such cases are rare, it demonstrates the necessity for improved diagnostic measures to enhance patient outcomes in similar clinical situations. Full article

In this paper, the experimental results of the thermal sub-system of a reliable and cost-effective polygeneration solar system are presented. This polygeneration system produces heating, cooling, and electricity from solar energy, which is used in an existing test building. Heat is generated in four evacuated tube solar collectors (ETCs). The heat may be used for space cooling through a variable geometry ejector (VGE) heat pump. In order to reduce the mismatches between generation and consumption, two thermal storage tanks were added. The performance of a new thermal storage, with 400 L, able to store both sensible and latent heat, was tested. The heating performances of the test building were assessed. Ejector cycle tests were also performed, and the variation of the cooling coefficient of performance (COP) was calculated for different flow rates. For heating, the results showed that the heat storage was capable of heating the test building for 8 h, with temperatures between 22 °C and 26 °C. All results showed that this polygeneration prototype could be capable of meeting the heating and cooling needs when applied to a real building. Full article

Heat-stressed lactating dairy cattle exhibit unique metabolic symptoms, many of which are undoubtedly involved in heat-induced subfertility. Because of its known systemic effects, we hypothesized that γ-aminobutyric acid (GABA) participates in the regulation of insulin and progesterone during heat stress. Multiparous lactating Holstein cows (n = 6) were studied during four experimental periods: (1) thermoneutral (TN; d 1–5), (2) TN + hyperinsulinemic–hypoglycemic clamp (d 6–10), (3) heat stress (HS; d 16–20), and (4) HS + euglycemic clamp (d 21–25). Blood samples were collected once daily via coccygeal venipuncture into heparinized evacuated tubes. Analysis of GABA concentrations from all four treatment periods yielded no differences. In direct comparison to TN concentrations, plasma GABA tended to decrease during the HS period (16.57 ± 2.64 vs. 13.87 ± 2.28 ng/mL, respectively, p = 0.06). Both milk production and plasma insulin were moderately correlated with plasma GABA (r = 0.35, p < 0.01; r = −0.32, p < 0.01). Plasma progesterone was correlated with plasma GABA concentrations during TN but not HS periods. These results are the first to indicate that peripheral GABA could be involved in the regulation of factors known to affect production and reproduction during heat stress. More research is needed to determine its precise role(s). Full article