Search Results (66)

The rapid growth of electric vehicle (EV) adoption presents significant challenges for power system stability while creating new opportunities for decentralized energy management. Peer-to-peer (P2P) energy networks have emerged as a promising approach for transforming EVs from passive loads into coordinated grid assets. This paper presents a comprehensive review of EV-P2P integration through a three-layer architectural framework that systematically connects physical infrastructure, market mechanisms, and intelligent control strategies. The Physical Layer reviews how V2X technologies and bidirectional charging enable EVs to operate as flexible storage resources and ancillary service providers. The Transactional Layer reviews on blockchain-based platforms, auction mechanisms, and game-theoretic models for secure energy trading. The Intelligence Layer reviews advanced control strategies, including decentralized optimization methods such as the Alternating Direction Method of Multipliers (ADMM) and Deep Reinforcement Learning. Collectively, the reviewed studies demonstrate that these approaches enable EVs to operate as flexible loads, distributed storage resources, and ancillary service providers, while improving energy trading efficiency, reducing operating costs, and alleviating network congestion under simulated operating conditions. Despite these promising results, a substantial gap remains between simulation-based studies and practical implementation. Future research should prioritize integrated pilot projects to evaluate scalability, interoperability, cybersecurity, and regulatory compliance under realistic operating conditions. Full article

The development of the electric vehicle sector increasingly requires optimal intelligent and embedded energy management. Electric vehicles are now positioning themselves as a strategic alternative to traditional fuel vehicles. This article therefore highlights the design of an embedded system capable of evaluating and transmitting in real time the state-of-charge (SoC) of an electric vehicle battery to a cloud platform, while optimizing energy consumption and data reliability. The methodological approach proposes an experimental study involving the development of two deep learning models, LSTM (Long Short-Term Memory) and GRU (Gated Recurrent Unit), in the MATLAB 2024.b environment, associated with the design of an embedded prototype for data collection and transmission via Arduino IoT Cloud. Then, a comparative analysis of the models’ performances is also carried out. The results obtained show that the GRU model offers the best performance, with an accuracy of 83.6%, an MSE of 0.0715, and an RMSE of 0.2589, thus validating the relevance of the proposed approach for the intelligent estimation of the state-of-charge in a real application context. Full article

Cities preparing Sustainable Urban Mobility Plans (SUMPs) increasingly require practical tools capable of merging diverse mobility datasets and transforming them into planning-relevant indicators. This article introduces PRIORITY (Platform for the tRansition to sustaInable zerO-caRbon mobilITY), a prototype platform designed to support mobility analysis and decision-making in urban contexts. The platform integrates Floating Car Data, GTFS feeds describing public transport supply, and detailed land-use and zoning information. By relying on these heterogeneous data streams, PRIORITY generates indicators such as travel and stop times, trip distances, trip volumes, energy consumption, pollutant emissions, external costs, and electric-vehicle charging behavior. The platform is organized into two main components: a back end and a front end. The back end, which constitutes the operational core, manages all collected data and ensures their structured storage in a shared database capable of handling large volumes of information on urban form, individual mobility patterns, public transport services, and modeling outcomes. The front end provides an intuitive and versatile interface that dynamically presents the outputs generated by the platform’s analytical and modeling processes. A case application for the Metropolitan City of Rome (Italy) illustrates the operational use of the prototype and shows how PRIORITY can support transparent and reproducible evaluations during the preparation and monitoring of SUMPs. The demonstrated workflow highlights the prototype’s value for public authorities and planners seeking data-informed approaches to urban mobility assessment and decarbonization strategies. Full article

Electric vehicle (EV) charging behaviors exhibit significant heterogeneity in terms of price sensitivity, time-of-day preference, and weekend charging habits, creating challenges for charging demand prediction and service management. To address this issue, this paper proposes a three-variable charging response framework that jointly considers electricity price, time-of-day preference, and weekend preference. Using real charging-order data from a public charging platform, four behavioral parameters, namely baseline charging demand (Q₀), price sensitivity (α), time preference (β), and weekend preference (γ), are estimated through nonlinear least squares (NLS). Based on the extracted parameter vectors, K-means clustering is employed to identify five representative user groups: Commuting-Dominant, elastic energy-saving, Weekend-Switching, Night-Preferential, and discount-sensitive users. The results reveal substantial behavioral heterogeneity among users. To validate the proposed framework, both parameter interpretability analysis and benchmark comparisons are conducted. Compared with the best baseline model, the proposed method reduces the test RMSE from 11.5 kWh to 8.3 kWh (27.8%), decreases the test MAPE from 25.3% to 18.7% (26.1%), and improves the test R² from 0.70 to 0.80. The proposed framework provides an interpretable approach for EV charging behavior modeling and user segmentation, offering practical support for differentiated pricing, charging demand management, and intelligent charging service operation. Full article

In the context of charging infrastructure for electric vehicles, “non-discriminatory access” is a fundamental principle that ensures equal and fair access to public charging facilities for users, electricity suppliers, and service providers. The overarching goals of non-discriminatory access are to promote competition in the electric mobility market, improve user-friendliness and acceptance of electric vehicles, and serve as a key enabler for the successful transition to electric mobility. Emerging digital and technological innovations, including smart load management and interoperable billing platforms, are reshaping charging practices. In this context, inter-organisational EVCI sharing is gaining relevance as a means to enhance efficiency, reduce costs, and mitigate disparities in infrastructure availability. While numerous actor-specific challenges and opportunities are examined within the framework of the FAMOUS project, this article develops a matrix based on qualitative interviews, a requirements analysis, and a semi-systematic literature review of the term “non-discrimination”. The matrix is applied in two contexts: first, to public EVCI sharing in Germany and, second, to inter-organisational EVCI sharing within the FAMOUS project. In doing so, the matrix is tested, showing potential areas of discrimination. As such, the paper contributes to the still under-researched field of just mobility transitions and the expansion of charging infrastructure. Full article

Despite the rapid expansion of photovoltaic (PV) installations over the past decade, challenges such as curtailments of renewable energy sources (RESs) and grid constraints continue to limit the capacity of Cyprus’ power system to accommodate higher solar penetration. In this context, grid reliability, defined as the ability to maintain stable operation by balancing supply and demand, minimizing curtailment, and reducing stress on the island network, has emerged as a critical concern. The deployment of PV-plus-storage systems offers a viable solution to enhance grid reliability while alleviating operational constraints. This paper presents a real-world case study of the first commercially deployed grid-connected PV-powered, battery-integrated electric vehicle (EV) charging station in Cyprus. Commissioned in May 2025, the system integrates a 60.32 kW_p rooftop PV array, a 100 kW/97 kWh battery energy storage system (BESS), and a 160 kW DC fast charger. A custom cloud-based energy management platform enables real-time monitoring, forecasting, and optimization under a zero-export scheme. High-resolution operational and weather data were collected between 15 May and 30 November 2025. Over this period, the integrated PV-battery system supplied 29% of the site’s total energy demand (self-sufficiency rate of 28.97%) and achieved a self-consumption rate of 98.69%. Such rates would not have been attainable with a pure PV system, given the depot’s evening-concentrated EV charging demand profile, which requires the BESS to time-shift daytime solar generation. The system reduced depot electricity costs by approximately 29%, generating €16,010 in savings and avoiding 26.47 tonnes of carbon dioxide (CO₂) emissions compared to a grid-only baseline. Beyond site-level performance, the system contributed to grid stress reduction by absorbing excess PV generation that would otherwise have been curtailed/wasted. Operational insights indicate minimal temperature-related issues, highlight the importance of automated fault detection and alerting to minimize downtime, and demonstrate how periodic operation strategies can optimize system performance and mitigate curtailment in Cyprus’s isolated grid. Full article

With the widespread adoption of electric vehicles (EVs), the deep integration of transportation and power grids has emerged as a significant trend. EV charging stations, acting as dynamic loads, present challenges to real-time power balance and economic dispatch in microgrids, while EVs serving as mobile energy storage units offer new opportunities for system flexibility. To address these issues, this paper proposes a hardware-in-the-loop (HIL) co-design method for vehicle–grid-integrated microgrid energy management systems, covering the entire workflow from simulation to embedded deployment. This method resolves the core challenges of multi-objective optimization algorithm deployment on embedded platforms (i.e., high computational complexity, strict real-time constraints, and heterogeneous communication protocol integration) via deployability analysis, hybrid code generation, real-time task restructuring, and consistency validation. A prototype microgrid system integrating photovoltaic panels, wind turbines, diesel generators, an energy storage system, and EV charging loads was built on the RK3588 embedded platform. An improved multi-objective particle swarm optimization (MOPSO) algorithm is employed to optimize operational costs. Experimental results verify the effectiveness of the proposed co-design method. Compared with traditional rule-based control strategies, the MOPSO algorithm reduces the total daily operating cost of the VGIM system by approximately 50%. After integrating vehicle-to-grid (V2G) scheduling, the operating cost is further reduced. In addition, this method ensures the consistency of algorithm functionality and performance during the migration from HIL simulation to embedded deployment, and the RK3588-based embedded system can complete a single optimization iteration within 60 s, which fully satisfies the real-time requirements of industrial applications. This work provides a feasible technical pathway for the reliable deployment of vehicle–grid-integrated microgrids in practical industrial scenarios. Full article

The global transition towards sustainable and resilient energy systems has emphasized the need for efficient utilization of renewable energy sources (RESs) and rapid electrification of transportation. However, smart grids must address the intermittency of solar and wind power while accommodating the growing demand from electric vehicles (EVs). Hence, in this paper, a data-driven energy management system (EMS) is proposed that combines multivariable forecasting, generation scheduling, and EV charging coordination in a dual-level decentralized framework to increase the efficiency, reliability, and scalability of modern power grids. First, short-term forecasts of solar irradiance, wind speed, and load demand are addressed via five machine learning models ranging from nonlinear to ensemble models. Accordingly, a unified CatBoost-based platform for forecasting these three variables is selected because of its better performance and accuracy. These forecasts are subsequently utilized in a mixed-integer linear programming (MILP) framework for optimal generation scheduling in the considered network, fulfilling load demand at reduced electricity and emission costs while maintaining grid stability. Finally, a priority-based scheme is proposed for charging/discharging coordination of the aggregated EVs, minimizing demand variability while fulfilling vehicles’ charging needs and maintaining their batteries’ lifetime. The superiority of the proposed method lies in integrating a multivariable forecasting pipeline, linear MILP generation scheduling, and battery-health-aware V2G coordination in a unified decoupled framework, unlike many recent frontier works that treat these capabilities independently. Simulation results, under different scenarios, confirm that the proposed intelligent EMS can significantly reduce operational fluctuations, satisfy load and EV demands, optimize RES utilization, and support system cost-effectiveness, sustainability, and resilience. Full article

The rapid growth of electric vehicles (EVs) is reshaping transport systems and accelerating the sustainable digital transformation of smart mobility. EV battery-swapping, delivered through platform-based, data-driven service networks, offers a low-carbon alternative to conventional refueling and plug-in charging by shortening replenishment time and enabling centralized battery management. However, the behavioral mechanisms driving user adoption of this digitally enabled infrastructure remain insufficiently understood. This study develops a socio-technical system (STS) model in which social and technical drivers influence users’ intention to adopt EV battery-swapping services via the dual mediation of perceived trust and perceived risk. Using a three-stage mixed-methods design that combines a PRISMA-based literature review, expert interviews with user-journey mapping, and a large-scale user survey, the study identifies six social and technical antecedents of EV battery-swapping adoption. Based on 565 valid responses from EV users in the Beijing–Tianjin–Hebei region, partial least squares structural equation modeling and multi-group analysis are employed to test the proposed framework. The results show that all six antecedents significantly affect perceived trust and perceived risk, which in turn mediate their impacts on adoption intention, with notable heterogeneity across income and usage-frequency groups. The findings provide a mechanism-based extension of STS theory for digitally mediated battery-swapping infrastructure by showing how socio-technical conditions shape adoption via trust and risk, and they offer actionable implications for operators and policymakers to build secure, user-centered swapping services within intelligent transport systems. Full article

The accelerating adoption of electric vehicles (EVs) is intensifying pressure on urban power grids, particularly during evening peak hours. Existing smart-charging frameworks remain constrained by centralized control, static pricing, and limited integration of predictive intelligence. This study presents SMARGE, a hybrid AI–Blockchain smart charging platform that combines load forecasting, dynamic pricing, and cryptocurrency-based incentives to enhance decentralized EV energy management in Gaziantep Province. An ensemble of forecasting models (SARIMA, LightGBM, N-BEATS, and TFT) predicts 2026 hourly electricity demand, while an adaptive inverse-sigmoid pricing mechanism generates real-time incentives and disincentives for EV charging behavior. A fuzzy logic-based behavioral model simulates both unmanaged and managed charging across three scenarios. Results show that managed charging reduces peak load by 22.43%, shifts 67.45% of energy demand to off-peak periods, and achieves 94.86% charging fulfillment under constrained grid conditions. The blockchain layer—implemented through a custom ERC-20 token (SMARGE) on the Ethereum Sepolia testnet—enables secure, transparent, and low-cost microtransactions with an average confirmation time of 0.63 s. These findings demonstrate that tightly coupling AI forecasting with tokenized blockchain incentives can improve grid stability, lower operational costs, and enhance user autonomy in a scalable and decentralized manner. While promising, the study is limited by assumptions of synthetic user behavior and ideal communication conditions; future work will validate the platform in real-world pilot deployments and across different urban regions. Full article

A sustainable city requires a sustainable means of transportation. This ambition is leading towards higher penetration of electric vehicles (EVs) in our cities, in both the private and commercial sectors, putting an ever greater burden on the existing power grid. Modern deregulated power grids vary electricity tariffs from location to location and from time to time to compensate for any additional burden. In this paper, we propose a profit-aware solution to strategically manage the movements of EVs in the city to support the grid while exploiting these locational, time-varying prices. This work is divided into three parts: (M1) profit-aware charging location and optimal route selection, (M2) profit-aware charging and discharging location and optimal route selection, and (M2b) profit-aware charging and discharging location and optimal route selection considering demand-side flexibility. This work is tested on the MATLAB programming platform using the Gurobi optimisation solver. From the extensive case studies, it is found that M1 can yield profits up to 2 times greater than those of its competitors, whereas M2 can achieve profits up to 2.5 times higher and simultaneously provide substantial grid support. Additionally, the M2b extension makes M2 more efficient in terms of grid support. Full article

This study rigorously evaluated the integration of energy-harvesting systems within electric vehicles to prolong battery service life. A laboratory-scale system was configured utilizing a scale electric vehicle with a 12.6 V lithium-polymer (Li-Po) battery alongside an automated control platform to precisely estimate the real-time State of Charge (SoC) through monitoring of current, voltage, and temperature of the vehicle battery under three distinct driving conditions: (A) constant velocity at 30 km/h, (B) variable velocities exhibiting a sawtooth profile, and (C) random speed variations. Wind energy was harvested employing Savonius rotor microturbines, with assessments conducted on efficiency losses and drag coefficients to determine the net power yield for each operational profile, which was found to be marginally positive. Considering the energy consumption of electric vehicles based on 2017 U.S. EPA fuel economy data, the maximal recovered energy corresponded to 0.0833% of auxiliary system demand, while the minimal recovery was 0.0398%. These results substantiated the necessity for continued research into sustainable energy management frameworks for electric vehicles. They emphasized the critical importance of optimizing the incorporation of renewable energy technologies to mitigate the environmental ramifications of the transportation sector. Full article

Unmanned aerial vehicles (UAVs) are increasingly utilized across civilian and defense sectors due to their versatility, efficiency, and cost-effectiveness. However, their operational endurance remains constrained by limited onboard energy storage. Recent research has focused on electric propulsion systems integrated with hybrid energy sources, particularly the combination of solar cells and advanced battery technologies to overcome this limitation. This review presents a comprehensive analysis of the latest advancements in electric propulsion architecture, solar-based power integration, and hybrid energy management strategies for UAVs. Key components, including motors, electronic speed controllers (ESCs), propellers, and energy storage systems, are examined alongside emerging technologies such as wireless charging and flexible photovoltaic (PV) materials. Power management techniques, including maximum power point tracking (MPPT) and intelligent energy control algorithms, are also discussed in the context of long-endurance missions. Challenges related to energy density, weight constraints, environmental adaptability, and component integration are highlighted, with insights into potential solutions and future directions. The findings of this review aim to guide the development of efficient, sustainable, and high-endurance UAV platforms leveraging electric-solar hybrid propulsion systems. Full article

In fresh produce cold chain last-mile delivery, the highly dispersed customer base leads to exorbitant delivery costs, posing the greatest challenge for cold chain enterprises. Achieving a symmetrical balance between cost-efficiency, environmental sustainability, and service quality is a fundamental pursuit in logistics system optimization. This paper proposes integrating the crowd-shipping logistics model—characterized by internet platform sharing and flexibility—into the delivery service. It incorporates and extends features such as cold chain delivery, mixed fleets using gasoline and diesel vehicles (GDVs), electric vehicles (EVs), partial charging strategies for EVs, and time-of-use electricity pricing into the crowd-shipping model. A joint delivery mode combining traditional professional delivery (using GDVs and EVs) with crowd-shipping is proposed, creating a symmetrical collaboration between centralized fleet management and distributed social resources. The challenges associated with utilizing occasional drivers (ODs) are analyzed, along with the corresponding compensation decisions and allocation-related constraints. A route optimization model is constructed with the objective of minimizing total cost. To solve this model, an Improved Whale Optimization Algorithm (IWOA) is proposed. To further enhance the algorithm’s performance, an adaptive variable neighborhood search is embedded within the proposed algorithm, and four local search operators are applied. Using a case study of 100 customer nodes, the joint delivery mode with OD participation reduces total delivery costs by an average of 24.94% compared to the traditional professional vehicle delivery mode, demonstrating a more symmetrical allocation of logistical resources. The experiments fully demonstrate the effectiveness of the joint delivery model and the proposed algorithm. Full article

The increasing penetration of electrified vehicles is accelerating the evolution of on-board and off-board charging systems, which must deliver higher efficiency, power density, safety, and bidirectionality under increasingly demanding constraints. This article presents a system-level review of state-of-the-art charging architectures, with a focus on galvanically isolated power conversion stages, wide-bandgap-based switching devices, battery pack design, and real-world implementation trends. The analysis spans the full energy path—from grid interface to battery terminals—highlighting key aspects such as AC/DC front-end topologies (Boost, Totem-Pole, Vienna, T-Type), high-frequency isolated DC/DC converters (LLC, PSFB, DAB), transformer modeling and optimization, and the functional integration of the Battery Management System (BMS). Attention is also given to electrochemical cell characteristics, pack architecture, and their impact on OBC design constraints, including voltage range, ripple sensitivity, and control bandwidth. Commercial solutions are examined across Tier 1–3 suppliers, illustrating how technical enablers such as SiC/GaN semiconductors, planar magnetics, and high-resolution BMS coordination are shaping production-grade OBCs. A system perspective is maintained throughout, emphasizing co-design approaches across hardware, firmware, and vehicle-level integration. The review concludes with a discussion of emerging trends in multi-functional power stages, V2G-enabled interfaces, predictive control, and platform-level convergence, positioning the on-board charger as a key node in the energy and information architecture of future electric vehicles. Full article