Search Results (3,855)

Vegetation is an important component of ecosystems and plays an important role in carbon balance, water balance, and energy conversion. The spatial and temporal changes in the normalized difference vegetation index (NDVI), water resources, and hydrometeorological factors in southwest China between 2003 and 2020 were investigated using multisource remote sensing data. Correlation analyses were performed to assess the correlation among NDVI, water resource changes, and hydrometeorological factors with different time lags. A stepwise regression model with different lag times was constructed to clarify the effects of four topographic factors and eight climatic factors on NDVI, and the following conclusions were obtained: (1) NDVI increased from 2003 to 2020, and the increase became obvious after 2012. (2) NDVI was considerably affected by alterations in the soil water content caused by natural changes. The correlation of NDVI with evapotranspiration and precipitation was high, followed by NDVI’s correlation with surface temperature. The spatial distribution of the positive correlation between NDVI and evapotranspiration and NDVI and precipitation was relatively consistent, and a positive correlation was observed in most parts of Southwest China. (3) The hydrometeorological factors mainly affected NDVI with a lag of 0–1 month, and the correlation was high in western Sichuan and most of Yunnan. In Yunnan, Available Water Capacity (AWC) affected NDVI with a lag of 0–2 months; the lag was 0–1 month in western Yunnan and 1–2 months in eastern Yunnan. (4) In terms of different vertical heights, the NDVI in the regions with altitudes higher than 3000 m was affected by climate change, especially evapotranspiration and precipitation. (5) Digital Elevation Model (DEM), Latitude (Lat), Evapotranspiration (ET), Precipitation (PRCP), Land Surface Temperature (LST), and NDVI were closely related in the construction of stepwise regression models with different lag times. Full article

Low-carbon operation and reasonable carbon responsibility allocation are essential for improving source-load coordinated emission reduction in park integrated energy systems (PIESs). Existing allocation methods usually trace carbon emissions or calculate marginal contributions, but they still have difficulty distinguishing heterogeneous park users with different load rigidity, demand response (DR) capability, payment capability and real carbon-reduction potential. To address this problem, this paper proposes a carbon responsibility allocation method for PIESs considering user heterogeneity and develops a carbon-cost-feedback-based bi-level low-carbon scheduling model. First, park users are classified into high-energy-consuming industrial users, commercial and public service users, and energy infrastructure users according to quantitative criteria related to energy consumption scale, load continuity, adjustable load proportion and distributed-resource interaction capability. A heterogeneity indicator system is then established, including DR elasticity, electricity utilization efficiency, payment capability, DR potential and actual carbon-reduction potential. Second, an improved Shapley value allocation model is constructed by combining coalition marginal contribution with entropy-weighted heterogeneity correction. The allocation results are converted into user-side carbon responsibility cost signals and embedded into a bi-level optimal scheduling model, where the upper level minimizes the system operating cost and the lower level minimizes users’ integrated energy-use cost. Case studies show that, compared with the conventional economic scheduling scenario, the proposed model reduces the total system cost from CNY 5.0782 million to CNY 4.3258 million and decreases carbon emissions from 14,994.39 t to 10,874.62 t, corresponding to reductions of 14.82% and 27.47%, respectively. The results indicate that the proposed method can coordinate fairness-oriented carbon responsibility allocation with incentive-oriented low-carbon scheduling, supporting both SDG 11 and SDG 12. Full article

With the increasing penetration of renewable energy generation (REG) in novel distribution systems, active distribution networks (ADNs) integrated with microgrids (MGs) play a crucial role in enhancing the flexibility of regulation resources and promoting the accommodation of REG. To meet the operational requirements for efficient collaboration between ADNs and MGs under different dispatch time scales, this paper proposes a collaborative optimal dispatch strategy for multi-microgrid active distribution systems based on a hybrid game and variable time scales. Firstly, a transaction operation framework is constructed for the distribution network operator (DNO) and a multi-microgrid alliance (MMA), considering the peer-to-peer (P2P) transaction mode. On this basis, a day-ahead hybrid game model with a two-layer structure is constructed, the upper layer is a master–slave game with the DNO as the leader and the MMA as the follower, while the lower layer is a cooperative game for MGs within the MMA. An asymmetric Nash bargaining strategy based on contribution degree in P2P transactions is introduced to ensure equitable benefit allocation among cooperative MGs. Secondly, an intra-day rolling optimization model for reactive power and voltage based on variable time scales is proposed, which enhances the system’s responsiveness to real-time source–load power fluctuations by dynamically adjusting the dispatch time scale. Finally, the alternating direction method of multipliers (ADMM), integrated with a strategy separation mechanism, is adopted to efficiently solve the hybrid game model involving numerous 0–1 variables. The case study results indicate that, under the proposed strategy, the MMA’s power purchase cost from the DNO and ESS operational cost are decreased by 9.7% and 11.6%, respectively, while the system’s average deviation rate of node voltage decreases by 0.82%. Therefore, the proposed collaborative dispatch strategy can not only effectively reduce the system’s operational cost and ensure voltage stability but also significantly promote the accommodation of REG. Full article

With increasing penetration of distributed energy resources, peer-to-peer (P2P) electricity trading has attracted attention for locally utilizing surplus renewable energy. This paper proposes a distributed consensus-based P2P electricity trading method that explicitly considers prosumer equipment operation constraints. Each prosumer autonomously solves a daily scheduling problem considering electricity demand, PV generation, battery operation, grid purchase and sale, and P2P trades with neighboring prosumers. P2P prices and desired trading quantities are iteratively adjusted through local information exchange. After convergence, bidirectional trades are converted into net one-way trades, and the final feasible daily schedule is obtained by re-optimizing with fixed trading quantities. Numerical simulations were conducted for six low-voltage prosumers using annual residential demand data and a representative daily PV generation profile. In the base case, the proposed method reduced annual electricity cost by 13.7% compared with the no-P2P case, while its total cost was only 2.3% higher than that of the centralized benchmark. Unlike the centralized benchmark, which increased costs for some prosumers, the proposed method reduced costs for all prosumers. Wheeling-charge sensitivity analysis showed that the charge affects P2P trading volume and benefit allocation. Future work will address tariff design, PV uncertainty, scalability, and distribution-network constraints. Full article

Fine-paste earthenware held symbolic significance in Hindu and Buddhist rituals and domestic use in Southeast Asia. Despite the influx of Chinese glazed ceramics from the ninth century onward, these locally produced vessels continued to circulate widely until the fourteenth century along maritime trade routes extending from northern Sumatra and Java to the southern Philippines and the Thai–Malay Peninsula. Integrated petrographic, Field Emission Scanning Electron Microscopy (FESEM), and Energy Dispersive X-ray Spectroscopy (EDS) analyses were employed to compare fine-paste earthenware from the Kok Moh production center in Songkhla Province, Thailand, and the Kota Cina consumption site in northern Sumatra, Indonesia. Petrographic observations indicate broadly similar mineralogical compositions in samples from both sites, consistent with the use of kaolin-rich clay materials. FESEM reveals that Kok Moh samples exhibit relatively dense and homogeneous microstructures with more continuous matrices, whereas Kota Cina specimens display coarser textures, more distinct mineral inclusions, and less consolidated matrices. EDS elemental mapping further demonstrates a more uniform distribution of major elements in the Kok Moh samples. Although both groups share broadly similar silica–alumina compositions, the observed microstructural differences suggest variations in clay preparation and firing practices rather than major differences in raw material selection. Comparison with published data from Nakhon Si Thammarat supports an association with kaolin-rich clay resources in southern Thailand. In contrast, the examined ceramics differ from fine-paste wares reported from northeastern Thailand, Myanmar, and India. These findings suggest that maritime Southeast Asian fine-paste ware developed as a localized technological tradition shaped by regional resources, production practices, and maritime exchange networks. Full article

The increasing adoption of renewable energy sources introduces significant variability in power generation, requiring effective strategies to ensure maintain grid stability. Incentive-based demand response programs provide a practical solution for balancing supply and demand, however disputes may arise over energy data integrity. The existing solutions frequently rely on centralized authorities, exposing a single point of failure, or high costs and privacy limitation of recording granular data on-chain. To address this challenge, we propose a decentralized framework that separates cloud storage from integrity certification. This system employs a community aggregator to collect high-frequency energy measurements, store the raw data in the cloud, while anchors unique cryptographic hashes for batch of raw data to a public blockchain. This process creates an auditable and tamper-evident record of data. By recording only hashes on chain, our approach achieves privacy and scalability. Evaluation using a real-world Australian dataset confirms that the system enables transparent dispute resolution, with blockchain transaction costs consistently representing less than 0.10% of the total incentives awarded to participants. Full article

This study presents a hybrid controller that integrates fuzzy logic control and the Incremental Conductance method. This controller optimizes maximum power point tracking in a 330 W photovoltaic system by designing a DC-DC converter. The study evaluates how the number and distribution of membership functions, specifically three-, five-, and seven-function configurations, affect system performance using the Integral Square Error (ISE) and Integral Absolute Error (IAE) indices. The empirical results demonstrate that the seven-function architecture yields optimal performance, minimizing ISE and IAE to 0.1155 and $7.365\times {10}^{-4}$, respectively. Furthermore, this optimal configuration attains an energy efficiency of 99.7%, notably outperforming the baseline three-function configuration, which exhibited a worst-case efficiency of 98.9 %. To assess robustness against dynamic environmental variations, this study subjects the optimal configuration to fluctuating irradiance and temperature profiles. Additionally, an analysis of computational resource consumption reveals that the proposed hybrid controller incurs a lower computational load for rule evaluation than three controllers reported in the recent literature. These findings demonstrate the system’s structural efficiency and superior optimization capability, achieving maximized photovoltaic energy harvesting at a low computational cost. Full article

Sewage sludge management is increasingly shifting from a liability-focused “treat-and-dispose” approach toward resource recovery, where digestion residues and their liquid fractions are treated as secondary feedstocks for nutrient, water, and energy recovery. In Europe, the recast Urban Wastewater Treatment Directive strengthens performance and monitoring requirements and reinforces the need for efficient sludge treatment and downstream valorization routes. This review synthesizes evidence on how pretreatment-induced changes in digestate properties translate into membrane performance outcomes and maps practical design implications for selecting pretreatment-membrane trains for nutrient recovery and reclaimed water production. Pressure-driven membrane methods (MF/UF/NF/RO), together with membrane distillation and electrodialysis, are central candidates for producing clarified water streams and concentrating nutrients; however, their performance is governed by digestate rheology, colloidal stability, and the composition of soluble microbial products and inorganic ions, which collectively shape fouling and scaling risks. Pretreatments such as thermal hydrolysis and microwave conditioning can modify floc structure and solubilize organics, with potential benefits for dewaterability and mass transfer, but can also shift particle size distributions toward fines and increase fouling propensity if not coupled with appropriate solid–liquid separation and conservative flux control. Emphasis is placed on mechanisms and operational trade-offs rather than single-point performance claims, highlighting where evidence is robust and where further comparability and full-scale validation remain necessary. Full article

Weak grid infrastructure and the absence of flexible storage are among the principal barriers to reliable, low-carbon energy access in sub-Saharan transmission systems. This paper proposes a hierarchical multi-objective framework for the optimal siting and sizing of battery energy storage systems (BESSs), applied to the 130-bus Mali transmission network within the EMERGE project. The upper level employs NSGA-II to simultaneously maximize daily price arbitrage revenue and minimize active power losses; the lower level solves a network-constrained DC optimal power flow with thermal branch limits enforced as hard linear inequalities via the Power Transfer Distribution Factor (PTDF) matrix. Over 500 generations, the framework identifies Bus 91 (SIRAKORO II, 150 kV) as the dominant storage location, achieving a maximum daily revenue of approximately €10,033 at a marginal loss increment of $6.7\times {10}^{-3}$ MWh. The resulting Pareto front gives Mali system planners a quantitative tool for trading off private investment returns against grid-level environmental impact, demonstrating that rigorous network-constrained BESS planning is technically tractable and economically viable in the resource-constrained context of sub-Saharan energy transitions. Full article

Integration of LiDAR and thermal sensing has become increasingly important in robotics, infrastructure diagnostics, environmental monitoring, and autonomous perception systems. LiDAR sensors provide accurate three-dimensional geometric information but do not directly capture thermal properties of observed objects, whereas thermal cameras provide temperature distributions without explicit spatial structure. Fusion of both sensing modalities enables thermally augmented 3D scene reconstruction and spatial localization of temperature anomalies. This paper presents a practical LiDAR–thermal fusion framework for three-dimensional localization of heat sources using an Ouster OS1 LiDAR sensor and a FLIR A70 thermal camera. The proposed framework includes intrinsic thermal-camera calibration, extrinsic LiDAR–thermal calibration, multimodal data synchronization, projection of LiDAR points onto the thermal image plane, and assignment of temperature values to spatial points. Additionally, a dedicated thermally distinguishable calibration target is proposed to enable reliable multimodal feature extraction under low-contrast LWIR imaging conditions. The developed framework was experimentally validated using real radiometric thermal data and LiDAR point clouds acquired under laboratory conditions. Quantitative evaluation demonstrated reprojection errors below 1 pixel and a mean hottest-point localisation error of approximately 4.1 cm at a distance of 12.3 m. The results confirm that accurate spatial localisation of thermal anomalies can be achieved using a geometry-based multimodal fusion approach without relying on computationally expensive learning-based methods. The proposed framework emphasises practical deployment, deterministic calibration, and applicability in scenarios where limited training data or constrained computational resources make learning-based approaches difficult to apply. The proposed system may be applied to building energy diagnostics, industrial inspection, technical infrastructure monitoring, and robotic perception systems that require reliable spatial localisation of heat sources under real measurement conditions. Full article

Field-programmable gate array (FPGA)-based reconfigurable system-on-chip (SoC) platforms are increasingly deployed in safety-critical domains such as autonomous driving and industrial automation, yet the existing literature lacks a systematic assessment of how these designs address functional safety requirements. This paper presents a systematic review of 36 peer-reviewed studies (core period 2010–2024, with historical context from 1998) on FPGA-based reconfigurable parallel processing SoCs, analyzed through three frameworks: a convergence–divergence analysis (CDA) that provides a structured exploratory lens for identifying research trajectory trends and informing hypothesis generation; a safety-critical gap analysis benchmarked against a three-layer standard framework comprising ISO 26262 (functional safety), ISO 21448/SOTIF (safety of the intended functionality), and ISO/PAS 8800 (AI safety properties); and a four-dimensional design space taxonomy spanning reconfigurability granularity, parallelism exploitation, design automation level, and safety criticality. The analysis reveals that 33 of the 36 surveyed studies (92%) ignore safety certification entirely. While recent work has begun establishing worst-case execution time (WCET) bounds for FPGA SoC platforms, none of the surveyed FPGA-based AI accelerator studies provide WCET bounds, although recent analytical models for multi-DPU architectures demonstrate the feasibility of such analysis. FPGA CNN accelerators achieve energy efficiencies of up to 60 GOPS/W, and dynamic partial reconfiguration (DPR) yields 2–5× throughput improvements, yet these gains remain unsupported by the formal verification or uncertainty quantification mandated for safety certification. The CDA framework reveals strong convergence between DPR, network-on-chip (NoC), and high-level synthesis research threads (scores 0.72–0.91), indicating maturation toward integrated design flows. We identify conformal prediction as a distribution-free hardware-compatible framework for uncertainty quantification on resource-constrained FPGAs, motivated by requirements from ISO 21448 (triggering event identification) and ISO/PAS 8800 (runtime confidence monitoring), and propose a prioritized research agenda to bridge the gap between FPGA performance optimization and safety-certified deployment in transportation systems. Full article

The control of micro energy grids (MEGs) is characterized by volatility, uncertainty, and decentralization. Traditional power distribution algorithms, designed for centralized, dispatchable generators, are inadequate for MEG environments. Controllable load management provides peak shaving, load balancing, frequency regulation, and voltage stability, as well as fast balancing services for renewable energy grids in distributed power systems. A non-grid-tied inverter costs a fraction of its grid-tied counterpart for the same capacity. In the initial setting, one or more inverters are used. As the demand grows, more non-grid-tied inverters are added to the mix. Non-grid-tied inverters cannot be connected in parallel. There is no practical solution available in the market for the optimum utilization of this type of setting. Unlike a grid-tied microgrid, in non-grid-tied mode, a microgrid uses grid power only when needed, prioritizing renewable sources. This paper explores autonomous strategies for controlling and coordinating multiple renewable energy sources in MEG settings. It reviews and develops an algorithmic framework for optimal load distribution among multiple renewable sources, including solar photovoltaic (PV), wind turbines, and battery energy storage systems (BESSs). The proposed framework integrates resource forecasting, multi-objective optimization, and adaptive supervisory control to ensure stability, maximize renewable penetration, and minimize operational costs. Performance considerations, mathematical modelling, and potential implementation architectures are discussed. A hybrid approach, combining multiple algorithms, is therefore proposed. In this paper a real-life solution is proposed to a real-life problem. Full article

Modern smart cities increasingly depend on resilient and intelligent energy infrastructures to maintain critical urban services during large-scale disturbances and multi-fault conditions. Conventional restoration approaches are often limited by centralized operation, delayed response, and inadequate coordination of distributed energy resources (DERs) under emergency conditions. To address these challenges, this paper proposes a Federated AI-Driven Urban Energy Resilience Framework for Smart City Critical Infrastructure Restoration using Virtual Power Plant (VPP) coordination, blockchain-enabled peer-to-peer (P2P) energy trading, and intelligent distributed energy management. The proposed framework is validated on the IEEE 118-bus radial distribution system under severe dual-fault outage conditions, representing urban disaster-induced infrastructure interruptions. Critical urban service zones, including healthcare support systems, emergency loads, smart residential sectors, and EV charging corridors, are considered during the restoration process. The Seagull Optimization Algorithm (SOA) is employed to optimize DER dispatch and improve restoration performance under operational constraints. A progressive restoration strategy comprising conventional outage conditions, VPP-assisted restoration, blockchain-enabled decentralized energy trading, and AI-driven coordinated restoration is analyzed. Simulation results demonstrate that the proposed framework significantly enhances urban energy resilience by increasing load restoration from 55.05% to 94.20%, reducing Energy Not Supplied (ENS), improving voltage stability, and lowering interruption-related economic losses. The minimum bus voltage improves to 0.965 p.u. under the proposed coordinated restoration strategy. The results show that coordinated VPP operation and blockchain-based energy sharing can support reliable restoration of critical urban infrastructure during major outage conditions. The results indicate that integrating AI-assisted VPP coordination with secure decentralized energy trading can effectively support smart city critical infrastructure continuity during extreme outage conditions. The proposed framework provides a scalable and resilient solution for future intelligent urban energy systems and disaster-resilient smart city applications. Full article

Due to climate change, corrosive conditions, and hydrogen-rich environments, steel energy pipelines inevitably develop a variety of defects. These deficiencies compromise pipeline safety and reliability, and neglecting them may result in pipeline leaks, fractures, and even potentially catastrophic explosions. Although a considerable body of literature reviews the effects of metal-loss defects like corrosion and cracks on pipeline safety and reliability, the impact of geometric deformation, like dents, lacks a comprehensive review. This work employs a hybrid systematic literature review (SLR) and bibliometric analysis (BA) to investigate the current research status of pipeline dent assessment. Four questions are answered: (1) What are the publication distribution characteristics, active journals, production organizations, and production authors related to research on pipeline dents? (2) What criteria have been employed for evaluating the pipeline dent? (3) From what perspective has the integrity of dented pipelines been assessed, and what research approaches have been used? (4) What are the future challenges and prospects of pipeline dent studies? The findings demonstrate that depth-, strain-, and damage-based evaluation criteria are widely employed to assess pipeline dents, each with merits and limitations. Despite the simplicity and ease of use of depth- and strain-based criteria, they are prone to underestimation flaws. In contrast, damage-based criteria, which consider multiple factors, are limited by their complexity and high computational resource requirements. The reliability of dented pipelines is predicted with remaining strength, fatigue life, and failure pressure using theoretical modeling, experimental testing, numerical simulation, or a combination of these methods. Future dent studies should involve refining numerical models, full-scale testing under varied loading conditions, and integrating advanced sensing techniques for real-time inspection. Full article

Against the background of China’s dual carbon goals, high-renewable-power systems suffer severe resilience threats from destructive ice disasters, and existing recovery approaches fail to fully exploit multi-type flexible resources with unsatisfying computational efficiency. Targeting this gap, this work establishes a resilience enhancement framework for ice-affected power grids. This model quantifies line failure probability considering time-varying ice thickness and wind load, generates representative fault scenarios via sequential Monte Carlo and K-means clustering, and innovatively incorporates mobile energy storage systems (MESSs) and low-temperature-corrected PEM electrolyzers into coordinated post-fault dispatch; an improved parrot optimization (PO) algorithm with Chebyshev chaos, random mutation and adaptive t-distribution is designed to boost solving efficiency. Tested on the IEEE 39-bus system, the proposed method reduces average load shedding to 3.7% and raises renewable accommodation to 95.6%, outperforming fixed energy storage and literature-based strategies by cutting load curtailment by 45.6% and 30.2% respectively, while multi-condition sensitivity analyses validate its stable applicability under varying disaster intensity and renewable penetration. This coordinated scheduling strategy supplies feasible technical support for practical anti-icing resilience promotion of new-type power grids. Full article