Search Results (672)

Background: Understanding the mechanisms underlying dental pain caused by pulpitis in humans has led to the development of animal models, such as the rat, which enable the study of the mechanisms underlying inflammation; the use of these models is considered ethically justified when the anticipated scientific benefits outweigh the potential impacts on animals in the harm/benefit balance. Objective: To develop a rat model of mechanically induced pulpitis and to evaluate the potential impact on animal well-being. Methods: Pulpitis was mechanically induced in male Lewis rats (13–16 weeks, 350–400 g) which were anesthetized and endotracheally intubated. Following pulp exposure, the cavity was sealed with either amalgam (n = 10) or zinc phosphate cement (n = 10). Following recovery and return to their housing, behavioral assessments and histological evaluations using Hematoxylin and Eosin (H&E) staining were conducted in separate cohorts at two time points: 3 h and 5 days following the procedure. Results: A standardized model of mechanically induced pulpitis was established and verified clinically and by histopathological analysis, which showed evidence of the inflammatory process and revealed no statistically significant differences in the scoring of pain, discomfort, or distress, nor in the measurements of food and water consumption or body weight. Conclusions: The behavioral assessments conducted in this study supported the implementation of a safe and easily reproducible model for future research aimed at elucidating the mechanisms underlying pulp inflammation. Full article

Acromegaly is caused by an excessive secretion of growth hormone and the secondary elevation of IGF-1 levels, leading to progressive changes in multiple body systems, including the craniofacial region and oral cavity. Dental manifestations such as mandibular overgrowth, macroglossia, malocclusion, periodontal disease, and prosthetic difficulties represent not only a clinical component of the disease but also a significant therapeutic and diagnostic challenge. The aim of this review is to present the current state of knowledge on the relationship between acromegaly and oral health and to analyze the role of interdisciplinary collaboration between endocrinologists and dentists in patient care. For this narrative review, a literature search was conducted in the PubMed, Scopus, and Web of Science databases covering the period from 2000 to 2025. Sixty-two peer-reviewed publications meeting the methodological and thematic criteria were included in the analysis, including original studies, meta-analyses, systematic reviews, and case reports. The results indicate significant correlations between disease activity and the severity of periodontal and microbiological changes, while effective endocrine treatment only results in the partial regression of morphological changes. Particular attention was given to the role of the dentist in recognizing the early symptoms of the disease, planning prosthetic and surgical treatment, and monitoring therapy-related complications. Interdisciplinary collaboration models, including integrated clinics and co-managed care, were also described as optimal systemic solutions for improving treatment quality. The conclusion drawn from the analysis are as follows: there is a need for the permanent integration of dentistry into the standard of interdisciplinary care for patients with acromegaly, in both diagnostic and therapeutic dimensions. Increasing awareness among dentists and developing integrated collaboration models may reduce the time to diagnosis, improve patients’ quality of life, and enable the more effective management of craniofacial complications in the course of this rare disease. Full article

Background: Childhood cancer is considered one of the main causes of mortality and morbidity worldwide. There is strong evidence of the oral toxic effects of oncologic treatments, but their incidence is difficult to determine. The novel therapeutic strategies in Pediatric Oncology have led to increased survival in this population, resulting in an increased incidence of long-term effects, which diminish the patient’s quality of life. Methods: The search for articles started on 5 November 2024 and ended on 5 December 2024. Following the PRISMA Statement, a total of 1266 articles were obtained, from which 13 were selected for review. All articles were considered to be of high quality. The antineoplastic treatments used in them were chemotherapy, radiotherapy, surgery and immune therapy. Results: Most articles were cohorts and case controls. Only one case report was obtained. The results revealed that the most prevalent sequelae in the pediatric population after antineoplastic treatment were enamel alterations, microdontia, dental caries, periodontal disease, gingivitis, hyposalivation, alteration of the oral microbiome, alteration of mandibular bone density and malocclusion. The lesions are different depending on the therapy used. Conclusions: Oncologic treatments in children with cancer cause multiple oral sequelae such as microdontia, dental caries, enamel alterations, salivary gland alterations, mucositis and root resorption. It cannot be concluded which therapy has the most detrimental effect as each has a different mechanism of action in the oral cavity. Full article

Aim: Pacifiers play a critical role in the early stages of craniofacial and palate development during infancy. While they provide comfort and aid in soothing, their use can also have significant impacts on the growth and function of the oral cavity. This study aimed to simulate and predict the behavior of six different types of pacifiers and their functional interaction with the tongue and palate, with the goal of understanding their potential effects on orofacial growth and development. Materials and Methods: Biomechanical analysis using Finite Element Analysis (FEA) mathematical models was employed to evaluate the behavior of six different commercial pacifiers in contact with the palate and tongue. Three-dimensional solid models of the palate and tongue were based on the mathematical framework from a 2007 publication. This allowed for a detailed investigation into how various pacifier designs interact with soft and hard oral tissues, particularly the implications on dental and skeletal development. Results: The findings of this study demonstrate that pacifiers exhibit different interactions with the oral cavity depending on their geometry. Anatomical–functional pacifiers, for instance, tend to exert lateral compressions near the palatine vault, which can influence the hard palate and contribute to changes in craniofacial growth. In contrast, other pacifiers apply compressive forces primarily in the anterior region of the palate, particularly in the premaxilla area. Furthermore, the deformation of the tongue varied significantly across different pacifier types: while some pacifiers caused the tongue to flatten, others allowed it to adapt more favorably by assuming a concave shape. These variations highlight the importance of selecting a pacifier that aligns with the natural development of both soft and hard oral tissues. Conclusions: The results of this study underscore the crucial role of pacifier geometry in shaping both the palate and the tongue. These findings suggest that pacifiers have a significant influence not only on facial bone growth but also on the stimulation of oral functions such as suction and feeding. The geometry of the pacifier affects the soft tissues (tongue and muscles) and hard tissues (palate and jaw) differently, which emphasizes the need for careful selection of pacifiers during infancy. Choosing the right pacifier is essential to avoid potential negative effects on craniofacial development and to ensure that the benefits of proper oral function are maintained. Therefore, healthcare professionals and parents should consider these biomechanical factors when introducing pacifiers to newborns. Full article

Objectives: Anisakidosis is an emerging, cosmopolitan, and underdiagnosed parasitic disease caused by the accidental ingestion of third-stage anisakid larvae when consuming raw or improperly prepared seafood. Within hours to days of consuming infected raw seafood, patients may develop acute gastrointestinal symptoms including pain, nausea, vomiting, diarrhea and/or constipation, as live anisakid larvae attach to the gastric, or more rarely, the intestinal mucosa. Cases have been reported in which the nematodes succeed at migrating from the stomach upwards to the esophagus and then the oral cavity. Therefore, the purpose of the present literature review is to collect, analyze, summarize and present the relevant epidemiological, clinical, diagnostic, parasitological, therapeutic, and prognostic data concerning anisakidosis localized inside the oral cavity. Methods: An electronic search of the PubMed, Scopus, and Ovid databases was performed with them being accessed for the last time on 29 March 2025. Results: The present literature review identified 13 individual case reports of oral mucosa anisakidosis, which were published in the period 1971–2022. Conclusions: Our review aims to summarize the relevant epidemiological, clinical, diagnostic, parasitological, therapeutic, and prognostic data regarding the oral localization of anisakidosis, a helminthic infection caused by the accidental ingestion of live anisakid larvae and which manifests mainly with gastrointestinal symptoms. Its localization in the oral mucosa appears to be exceptionally rare and, in most cases, occurs with a characteristic clinical picture, defined by the onset of acute mouth or throat pain immediately after the consumption of raw seafood and by the observation of one or more larvae, either lying on or penetrating the oral mucosa. Despite its rarity, dental health professionals and other clinicians should be aware of this disease and the possibility of its intraoral localization, since environmental factors on the one hand, and the adoption of foreign dietary habits on the other, will likely make anisakidosis a much more common disease worldwide in the near future. Full article

Background and Objectives: Dental restorations can be composed of various materials, including amalgams and methacrylate-based resins. The health risks associated with the components of the restorative materials have always been a concern, even more so with the ageing of the restorations. As the micronucleus (MN) test is a standard, accessible, and minimally invasive technique for studying the genotoxic effect of clastogenic chemicals on oral mucosal cells, the current study was conducted to determine the frequency and morphological properties of MN in the exfoliated oral mucosal cells. Materials and Methods: A total of 115 aged composite and amalgam restorations were included in this study. Epithelial cells were collected from the gingival tissue adjacent to the restorations of each patient and stained with a hematoxylin–eosin (HE) stain. After evaluation of the slides, the results were subjected to statistical analysis using Chi-square tests. The level of significance was set at 0.05. Results: The mean number of MN was significantly lower for composite restorations compared to amalgam restorations. There were no statistically significant differences between composite restorations aged 1–5 years, 5–10 years, over 10 years, and amalgam restorations aged over 10 years in the location (p = 0.11), staining (p = 0.11), or morphological characteristics (p = 0.18) of the MN. Conclusions: Despite the main limitation of this study, the lack of a control group, our results suggest that long-term exposure to restorative fillings and the ageing of these materials can cause DNA damage locally in the adjacent sites of oral cavity. Full article

Two-component dental materials are commonly used by the dentist for various applications (cementation of indirect restorations, filling of a cavity without layering, etc.). These materials are cured by redox polymerization. The (hydro)peroxide/thiourea/copper salt redox initiator system is well established and can be found in a wide range of commercially available dental materials. The thiourea is a key component of the initiator system. This study explores the influence of the nature of the thiourea reducing agent on the reactivity and efficiency of redox initiator systems. In this work, six different thiourea structures were investigated, in combination with copper(II) acetylacetonate and cumene hydroperoxide (CHP), to understand their impact on polymerization kinetics and mechanical properties of methacrylate-based materials. Various experimental techniques, including mass spectrometry (MS) and spectroscopic analyses, were employed to elucidate the underlying mechanisms governing these redox systems. The results highlight that thiourea plays a dual role, acting both as a reducing agent and as a ligand in copper complexes, affecting radical generation and polymerization efficiency. Structural modifications of thiourea significantly influence the initiation process, demonstrating that reactivity is governed by a combination of factors rather than a single property. Self-cure dental flowable composites exhibiting excellent flexural strength (>100 MPa) and modulus (>6000 MPa) were obtained using hexanoyl thiourea, N-benzoylthiourea, or 1-(pyridin-2-yl)thiourea as a reducing agent. The adjustment of the Cu(acac)₂ enables to properly set the working time in the range of 100 to 200 s. These findings provide valuable insights into the design of the next generation of redox initiating systems for mild and safe polymerization conditions. Full article

This study presents a methodology for developing and validating digital models of tooth-inlay systems, aiming to trace the complete workflow from clinical procedures to simulation by involving dental professionals—dentists for manual cavity preparation and dental technicians for restoration modelling—while integrating micro-computed tomography (micro-CT) imaging with finite element analysis (FEA). The proposed workflow includes (1) the acquisition of high-resolution 3D micro-CT scans of a non-restored tooth, (2) image segmentation and reconstruction to create anatomically accurate digital twins and mesh generation, (3) the selection of proper resin and the 3D printing of four typodonts, (4) the manual preparation of cavities on the typodonts, (5) the acquisition of high-resolution 3D micro-CT scans of the typodonts, (6) mesh generation, digital inlay and onlay modelling and material property assignment, and (7) nonlinear FEA simulations under representative masticatory loading. The approach enables the visualisation of stress and deformation patterns, with preliminary results indicating stress concentrations at the tooth-restoration interface integrating different cavity alternatives and restorations on the same tooth. Quantitative outputs include von Mises stress, strain energy density, and displacement distribution. This study demonstrates the feasibility of using image-based, tooth-specific digital twins for biomechanical modelling in dentistry. The developed framework lays the groundwork for future investigations into the optimisation of restoration design and material selection in clinical applications. Full article

Objective: This cross-sectional content analysis aimed to investigate how oil pulling is portrayed on YouTube Shorts, focusing on the types of speakers, claims made, and alignment with scientific evidence. The study further explored how the content may influence viewer perception, health behaviors, and the potential spread of misinformation. Methods: On 28 January 2025, a systematic search of YouTube Shorts was performed using the term “oil pulling” in incognito mode to reduce algorithmic bias. English language videos with at least 1000 views were included through purposive sampling. A total of 47 Shorts met the inclusion criteria. Data were extracted using a structured coding framework that recorded speaker type (e.g., dentist, hygienist, influencer), engagement metrics, stated benefits, oil type and regimen, the use of disclaimers or citations, and stance toward oil pulling rated on a 5-point Likert scale. Speaker background and nationality were determined through publicly available channel descriptions or linked websites, with user identities anonymized and ethical approval deemed unnecessary due to the use of publicly available content. In total, 47 videos met the inclusion criteria. Results: Of the 47 YouTube Shorts that met the inclusion criteria, most were posted by influencers rather than dental professionals. These videos predominantly encouraged oil pulling, often recommending coconut oil for 10–15 min daily and citing benefits such as reduced halitosis and improved gum health. However, a smaller subset advanced more extreme claims, including reversing cavities and remineralizing enamel. Notably, US-licensed dentists and dental hygienists tended to discourage or express skepticism toward oil pulling, assigning lower Likert scores (1 or 2) to influencers and alternative health practitioners (often 4 or 5). Conclusions: YouTube Shorts largely promote oil pulling through anecdotal and testimonial-driven content, often diverging from evidence-based dental recommendations. The findings reveal a disconnect between professional dental guidance and popular social media narratives. While some benefits like halitosis reduction may have limited support, exaggerated or misleading claims may result in improper oral hygiene practices. Greater engagement from dental professionals and improved health communication strategies are needed to counteract misinformation and reinforce oil pulling’s role, if any, as an adjunct—not a replacement—for standard oral care. Future studies should explore viewer interpretation, behavioral influence, and cross-platform content patterns to better understand the impact of short-form health videos. Full article

Background: Prematurely born newborns with low birth weight constitute a group of patients who require special care from the first days of life. Prematurity and low birth weight affect about 13.4 million infants. Risk factors include placental disorders but also factors related to the mother, such as smoking, alcohol drinking, drug use, malnutrition, or certain diseases. It is imperative to educate women of reproductive age (15–49) about the basic factors influencing embryonic development, such as oral health, diet, medicine intake, and harmful habits. Even though most women are aware of the negative impact of harmful habits on the fetus, still too little attention is paid to oral health in pregnant women. Poor oral health may influence the well-being of the future mother, as well as of the child. Therefore, women of reproductive age and those who are pregnant must have adequate knowledge on this subject. The aim of this study was to assess the knowledge of Polish women of reproductive age (15–49) regarding oral health during pregnancy, including the impact of dental treatment, oral hygiene, and maternal oral conditions on pregnancy outcomes and the health of the newborn. Materials and Methods: This was a cross-sectional study of 508 women, in the reproductive age, whose age ranged from 18 to 49 years old. The surveys were conducted from April 2020 to November 2020. The questionnaire was originally developed based on the available literature and consisted of seven sections: basic information, general health and habits, pregnancy status and dental care, knowledge of treatment options during pregnancy, oral health status and its association with the risk of preterm birth, prematurity and the child’s oral health, and breastfeeding and oral development. Results: After excluding incomplete questionnaires, a total of 499 questionnaires were included in the analysis. Women participating in the study had a fairly good understanding of the impact of oral health on the fetus and the role of breastfeeding in the development of the stomatognathic system (from 50% to 70% correct answers). However, even though most respondents had completed higher education (344/68.94%), their knowledge of oral health, preterm birth, and low birth weight was very limited (including the impact of inflammation on the intrauterine development of the child or bacteria and transfer across the placenta). In these sections, the percentage of correct answers ranged from less than 20% to 50%. When analyzing knowledge by age, education, number of births, and place of residence, the highest levels of knowledge were observed among respondents with higher education, particularly those aged 27–32. Conclusions: Respondents had a fairly good understanding of the general impact of oral health during pregnancy and recognition of the importance of breastfeeding for infants. However, their knowledge about the impact of bacteria and inflammation in the mother’s oral cavity on prematurity and low birth weight was limited. Therefore, educating women of reproductive age and pregnant women on this topic is essential, as it may help reduce the adverse consequences of prematurity. Full article

Background and Objectives: Dental adhesives augmented with magnetic nanoparticles (MNPs) have been proposed to prevent microleakages. MNPs dispersed in a dental adhesive reduce the thickness of the adhesive layer applied in a magnetic field and enhance the bond strength by favoring the penetration of the adhesive into dentinal tubules. However, the restoration’s color has been found to be affected by the MNPs. This study tests the hypothesis that MNP coating can alleviate the esthetic impact of magnetic dental adhesives. Materials and Methods: We synthesized Fe₃O₄ MNPs with silica coating (MNPs-SiO₂), calcium-based coating (MNPs-Ca), and no coating. Their morphology was studied using transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Their chemical composition was assessed by energy-dispersive X-ray spectroscopy (EDX), and magnetic properties were measured using a vibrating sample magnetometer. FTIR spectroscopy was used to evaluate the polymerization of the MNP-laden adhesive. We prepared cavities in molar phantoms divided in four groups (n = 15 each) restored using the same adhesive with different MNP contents: Group 0 (G0)—no MNPs, G1—MNPs-SiO₂, G2—MNPs-Ca, and G3—uncoated MNPs. The restoration’s color was quantified in the CIELAB color space using a dental spectrophotometer. Results: MNPs-SiO₂ were globular, whereas MNPs-Ca had a cubic morphology. The SiO₂ layer was 73.1 nm ± 9.9 nm thick; the Ca(OH)₂ layer was 19.97 nm ± 2.27 nm thick. The saturation magnetization was 18.6 emu/g for MNPs-SiO₂, 1.0 emu/g for MNPs-Ca, and 65.7 emu/g for uncoated MNPs. MNPs had a marginal effect on the adhesive’s photopolymerization. The mean color difference between G0 and G2 was close to the 50:50% acceptability threshold, whereas the other groups were far apart from G0. The mean whiteness index of G2 did not differ significantly from that of G0; G1 deviated marginally from G0, whereas G3 differed significantly from G0. Conclusions: These results suggest that MNP coating can mitigate the influence of MNP-laden dental adhesives on the color of restorations. Full article

The involvement of oral bacteria in the pathogenesis of distant organs, such as the heart, lungs, brain, liver, and intestine, has been shown. We analyzed the distribution of bacterial species in the resected aortic valve by 16S rRNA metagenomic analysis and directly compared their gene sequences with those in the oral cavity. Thirty-two patients with aortic stenosis or aortic regurgitation who underwent aortic valve replacement were enrolled in this study. Antibody titer against periodontal pathogenic bacteria in the patient’s serum was analyzed. The genetic background and distribution of bacterial species on subgingival plaque, the dorsal surface of the tongue, and the resected aortic valve were analyzed. Patients with aortic valve disease were shown to have more severe periodontal disease by the detection of antibodies against Socransky’s red-complex bacteria of periodontitis. Bacterial DNA was detected in the aortic valves of 12 out of 32 patients. The genomic sequences of the V3-V4 region of the 16S rRNA in some bacteria isolated from the aortic valves of six patients who underwent metagenomic analysis were identical to those found in the oral cavity. The findings indicate that bacteria detected in the aortic valve may be introduced through oral dysbiosis, a condition characterized by an imbalance in the oral microbiota that increases the risk of periodontal disease and dental caries. Oral dysbiosis and the resulting potential bacteremia are associated with the pathogenesis of aortic valve diseases. Full article

Background/Objectives: Dental cavity preparation is a critical procedure in restorative dentistry that involves the removal of decayed tissue while preserving a healthy tooth structure. Excessive stress during tooth preparation leads to enamel cracking, dentin damage, and long term compressive pulp health. This study employed finite element analysis (FEA) to investigate the stress distribution in dental structures during cavity preparation using round diamond burs of varying diameters and depths of cut (DOC). Methods: A three-dimensional human maxillary first molar was generated from computed tomography (CT) scan data using 3D Slicer, Fusion 360, and ANSYS Space Claim 2024 R-2. Finite element analysis (FEA) was conducted using ANSYS Workbench 2024. Round diamond burs with diameters of 1, 2, and 3 mm were modeled. Cutting simulations were performed for DOC of 1 mm and 2 mm. The burs were treated as rigid bodies, whereas the dental structures were modeled as deformable bodies using the Cowper–Symonds model. Results: The simulations revealed that larger bur diameters and deeper cuts led to higher stress magnitudes, particularly in the enamel and dentin. The maximum von Mises stress was reached at 136.98 MPa, and dentin 140.33 MPa. Smaller burs (≤2 mm) and lower depths of cut (≤1 mm) produced lower stress values and were optimal for minimizing dental structural damage. Pulpal stress remained low but showed an increasing trend with increased DOC and bur size. Conclusions: This study provides clinically relevant guidance for reducing mechanical damage during cavity preparation by recommending the use of smaller burs and controlled cutting depths. The originality of this study lies in its integration of CT-based anatomy with dynamic FEA modeling, enabling a realistic simulation of tool–tissue interaction in dentistry. These insights can inform bur selection, cutting protocols, and future experimental validations. Full article

Background: The oral microbiome differs in obese patients compared to normal-weight subjects. Microbiologic shifts very often appear after surgical interventions such as bariatric surgery (BS) and in immunocompromised patients. However, the oral microbiome composition and load in subjects after bariatric surgery are unclear. Aim: The aim of this review is to summarize the current state of the art related to the oral microbiome shift induced by bariatric surgery and to discuss its implications on oral cavity health. Methods: Electronic databases: PubMed/Medline, Web of Science, and Cochrane Library were searched for articles published up to March 30, 2025, describing prospective studies focused on changes in the oral microbiota of patients who underwent bariatric surgery. Results: Eight studies measuring the oral microbiome with different approaches—16S ribosomal RNA (16S rRNA) sequencing, polymerase chain reaction (PCR), culture, and matrix-assisted laser desorption ionization time of flight mass spectrometry (MALDI TOF MS)—were included in this review. The following bariatric techniques were used: sleeve gastrectomy, Roux-en-Y gastric bypass, Omega loop gastric bypass, and laparoscopic gastric plication. The follow-up period ranged from 3 to 12 months. The results of microbiologic studies were unequivocal. There was an increment in Streptococcus mutans reported, high levels of Candida species, and increased rates of some periodontitis-associated bacteria (Porphyromonas gingivalis) in the post-bariatric surgery period, though some studies suggested a shift towards non-pathogenic composition of the oral microbiome in prospective observations. Conclusions: The local oral microbial homeostasis becomes strongly impacted by the bariatric surgical treatment itself as well as its consequences in the further post-operative period. Therefore, obese patients undergoing BS require very careful dental observation. Full article

Background: Aquaporins (AQPs) are integral membrane proteins that facilitate water transport across biological membranes. While their role is well-characterized in various tissues, their function in the oral cavity remains poorly understood. Saliva is an easily accessible, non-invasive biofluid that contains stable extracellular RNA and can reflect both systemic and local physiological or pathological processes, making it a promising source for RNA analyses. This study investigates AQP mRNA levels in human saliva. Methods: Saliva samples were collected from patients of a dental practice and analyzed using quantitative PCR to detect AQP levels. An in silico analysis of AQPs in cells of the oral cavity were performed. Baseline data of the patients were recorded. Results: Our findings demonstrate the presence of multiple AQP subtypes in human saliva. AQP5 was the most abundant, followed by AQP9 and AQP1. The levels of several AQPs showed intercorrelation, whereas AQP3 appeared to be independently regulated and did not correlate with the other AQPs. Conclusions: This study demonstrates that differential AQP mRNA levels can be detected in human saliva. These findings suggest that salivary AQP mRNA may serve as surrogate markers for altered AQP levels in cells of the oral cavity. In the future, such patterns of AQP levels could potentially be used to identify or monitor pathological conditions affecting the oral mucosa or salivary glands. Further studies are required to validate this approach and to understand its diagnostic relevance. Full article