Search Results (94)

Catalytic upgrading of bioethanol via a C–C coupling reaction is a sustainable method of producing 1-butanol, a high-performance biofuel. This reaction was studied using a flow-through microreactor system with Pd/MgO-Al₂O₃ and bimetallic Pd-Cu/MgO-Al₂O₃ mixed oxide-based catalysts in a H₂ carrier gas at a pressure of 21 bar and temperatures ranging from 200 to 350 °C. The effect of the metal promoter(s) on the hydrogen transfer reaction steps in the overall reaction was investigated. The palladium promoter significantly improved the activity and butanol selectivity across the entire temperature range. However, the yield of liquid products decreased significantly at temperatures higher than 250 °C, primarily because the decarbonylation side reaction of the acetaldehyde intermediate accelerated. The promoting effect of Pd was most beneficial below 250 °C because the decarbonylation reaction was inhibited by the reversible poisoning effect of CO on multiple Pd sites responsible for decarbonylation. Diluting the Pd phase with Cu increased liquid yields due to gradually decreasing decarbonylation activity. However, the dehydrogenation–hydrogenation activity decreased as well, as did the promoting effect on the corresponding reaction steps in the coupling reaction. Additionally, the product distribution changed dramatically, decreasing 1-butanol selectivity, because metallic Cu can catalyze the formation of ethyl acetate and ketone products. Full article

Quinone/hydroquinone couples play a crucial role in a variety of biochemical processes and chemical syntheses. Extending from our previous work, a practical dataset including the thermodynamic driving forces of 12 chemical processes for 118 quinone/hydroquinone couples accepting or releasing two hydrogen atoms in DMSO is established. The dataset serves as a foundation for assessing and discussing the thermodynamic capabilities of hydroquinones acting as two-hydrogen-atoms antioxidants or radical quenchers, quinones and semiquinone radicals acting as hydrogen atoms abstractors, and quinone/hydroquinone couples acting as dehydrogenation and hydrogenation reagents. The fundamental thermodynamic knowledge is expected to further promote the broader application of quinone/hydroquinone couples in the field of chemical antioxidation and redox reactions. Full article

This study explores nonthermal plasma reactions of methane and water in a two-phase system to produce methanol, examining reaction pathways, kinetics, and product distribution over time. The results show that methanol is the dominant liquid phase product among other oxygenates, including ethanol and acetic acid, with hydrogen as the largest fraction among gas-phase products comprising carbon monoxide, carbon dioxide, ethylene, and acetylene. Conductivity and pH trends of reactant water and their influence on reaction products were also analyzed. Methanol was found to be formed principally from the reactive coupling of methyl and hydroxyl radicals, as well as from methoxy and hydrogen radical combinations. Hydrogen was produced from three pathways: stepwise dehydrogenation of methane through electron-mediated hydrogen abstraction, sequential hydrogenation of ethane to acetylene, and water splitting. The methanol-yielding reactions proceeded at different rates in the liquid and gas phases, with gas-phase reactions occurring approximately nine times faster than the liquid-phase reactions. This work provides valuable insights into reaction pathways for direct methane conversion to oxygenates and value-added gas products under mild conditions using water as an environmentally friendly oxidant. Full article

Achieving selective, direct conversion of methane into value-added chemicals requires catalysts that can navigate the intrinsic trade-off between C–H bond activation and over-dehydrogenation. Transition metal phosphides (TMPs) have emerged as promising catalysts that can tune this selectivity. This work utilizes density functional theory (DFT) to systematically assess how the transition metal’s identity (M = Fe, Co, Ni) in isostructural M₂P phosphides governs this balance. The findings reveal that the high reactivity of Fe₂P and Co₂P, which facilitates initial methane activation, also promotes facile deep dehydrogenation pathways to coke precursors like CH*. In stark contrast, Ni₂P exhibits a moderated reactivity that kinetically hinders CH* formation while simultaneously exhibiting the lowest activation barrier for the C–C coupling of CH₂* intermediates to form ethylene. This revealed trade-off between the high reactivity of Fe/Co phosphides and the high selectivity of Ni₂P offers a guiding principle for the rational design of advanced bimetallic phosphides for efficient methane upgrading. Full article

Heteroaromatic motifs are prevalent in natural products and numerous high-value drug molecules. Consequently, the construction of alkylated heterocyclic frameworks holds significant importance. The Minisci reaction of heteroarenes has evolved into a flexible technique for the synthesis of substituted heterocyclic derivatives. However, the use of strong oxidants and external acid is inevitable during the reaction process. Herein, we present a versatile and accessible method for achieving cross dehydrogenation coupling between quinoline derivatives and inactive ether. This strategy utilizes inexpensive NaI and PPh₃ to support the reaction, obviating the need for metal complexes or sacrificial oxidants, and enables the straightforward synthesis of a diverse library of alkyl-substituted N-heteroarenes. Additionally, radical trapping experiments and fluorescence quenching experiments have been conducted to gain a more comprehensive understanding of the reaction mechanism. Full article

High-energy ball milling for different durations was used to synthesize nanocrystalline Mg₆₀Ni₂₅Cu₁₀Ce₅ powders. The morphology and microstructure of the milled powders were investigated by scanning electron microscopy and X-ray diffraction, respectively. It was found that different milling times result in considerably different phase composition. The powder milled for 1 h is characterized by elemental Mg, Ni, Cu and Ce with some minor content of intermetallics. In total, 3 h milling promotes the intensive formation of intermetallic compounds, while 10 h of powder processing results in a partially amorphous state coupled with compound phases. Isothermal hydrogenation and dehydrogenation experiments were conducted in a Sieverts’-type apparatus. It was found that all powders absorb H₂ reversibly, while the shortest milling time provides the best overall capacity. Excellent kinetics without any activation cycle were obtained for the 3 h milled composite, releasing and absorbing 50% of the total hydrogen content within 120 s. Each kinetic measurement has satisfactorily been fitted by the Johnson–Mehl–Avrami function. X-ray diffraction analysis on the dehydrided powders confirmed the complete desorption. Full article

Due to its widespread distribution in industrial, commercial, and residential settings, xylene detection is crucial. In this study, carbon sphere templates and NaHCO₃ etching were used to synergistically prepare WO₃ with uniform macropores, which was then decorated with Au elements. The findings demonstrated that the Au-decorated WO₃-etched sample (WO₃-1%E+Au) had the best sensing performance for 100 ppm xylene (response value: 21.3, optimal operating temperature: 360 °C) and short response/recovery time (1 s/11 s). The etching of NaHCO₃ and the synergistic carbon sphere templates were responsible for the sensing performance, as they enhanced the sample surface’s specific surface area and roughness while also supplying additional active sites. Furthermore, the sensor’s sensitivity and selectivity to xylene were enhanced by the coupling effect and dehydrogenation catalysis of the noble metal Au. The results of this work advance our knowledge of gas-sensing mechanisms and offer guidance for the creation of extremely sensitive and selective xylene gas sensors. Full article

Bile acids (BAs) are synthesized in the liver from cholesterol and are subsequently conjugated with glycine and taurine. In the intestine, bile acids undergo various modifications, such as deconjugation, dehydrogenation, oxidation, and epimerization by the gut microbiota. These bile acids are absorbed in the intestine and transported to the liver as well as the systemic circulation. BAs can activate many types of receptors, including nuclear receptors and cell surface receptors. By activating these receptors, BAs can exert various effects on the metabolic, immune, and nervous systems. Recently, the detailed structure of TGR5, the major plasma membrane receptor for BAs, was elucidated, revealing a putative second BA binding site along with the orthosteric binding site. Furthermore, BAs act as ligands for bitter taste receptors and the Leukemia inhibitory factor receptor. In addition, the Mas-related, G-protein-coupled receptor X4 interacts with receptor activity-modifying proteins. Thus, a variety of cell surface receptors are associated with BAs, and BAs are thought to have very complex activities. This review focuses on recent advances regarding cell surface receptors for bile acids and the biological actions they mediate. Full article

Copper complexes have attracted significant interest for catalyzing oxidative dehydrogenative carboxylation of alkanes to form esters. Here, we report a heterogeneous catalyst, in which copper complexes are immobilized on coal-bearing kaolin for the synthesis of allylic esters via C(sp³)-H bond activation through cross-dehydrogenation coupling reactions between cyclic alkanes and aromatic carboxylic acids. Systematic optimization of reaction conditions—including catalyst loading, copper content, oxidant, temperature, and reaction time—resulted in a high yield of 71% of allylic ester, comparable to homogeneous transition metal catalysts. The catalyst is easily recoverable via centrifugation and retains its activity over five consecutive reuse cycles. This system demonstrates broad substrate compatibility with various aromatic carboxylic acids and cyclic alkanes. Beyond offering an efficient and reusable catalytic route for allylic ester synthesis, this work highlights the potential of coal-bearing kaolin as a sustainable support material for transition metal catalysis and provides an environmentally benign method for activating inert C(sp³)–H bonds. Full article

Density functional theory calculations have been performed to explore the detailed mechanism of a ruthenium-catalyzed dehydrogenative annulation between α-carbonyl phosphonium ylide (A) and sulfoxonium ylide (B). The proposed catalytic cycles consist of several elementary steps in succession, namely the C–H activation of ylide A, the insertion of ylide B, reductive elimination, protodemetallation, and an intramolecular Wittig reaction, in which C–H activation is rate-limiting, with a free energy barrier of 31.7 kcal/mol. As A and B are both capable of being a C–H activation substrate and a carbene precursor, there are potentially four competing pathways including homo-coupling reactions. Further calculations demonstrate that A is more reactive in the C–H activation step than B, while the opposite conclusion is true for the ylide insertion step, which can successfully explain the fact that the solely observed product originated from the use of A as the C–H activation substrate and B as the carbene precursor. Molecular electrostatic potential, charge decomposition, and electron density difference analyses were performed to understand the distinct behaviors of the two ylides and the nature of the key ruthenium–carbene intermediate. Full article

This review highlights significant advances in iron-catalyzed cross-dehydrogenative coupling (CDC), a method pivotal for forming carbon-carbon (C-C) bonds directly from C-H bonds. This technique uses iron—a naturally abundant, inexpensive, and environmentally benign transition metal—as a catalyst to facilitate the coupling of two unfunctionalized C-H bonds. This method stands out for avoiding pre-functionalized substrates, reducing both waste and cost in organic synthesis. The discussion includes a variety of CDC methodologies involving combinations of C(sp³)-H with C(sp³)-H, C(sp³)-H with C(sp²)-H, and C(sp³)-H with C(sp)-H bonds. These methods have been successfully applied in synthesizing complex molecules and pharmaceuticals, highlighting the versatility and efficiency of iron catalysis. Full article

Herein, the presented results show that previously studied DNA/RNA-interacting bis-imidazole-calix[4]arene systems can, in aqueous solutions, efficiently bind a series of biorelevant transition metal cations by coordination with the two imidazole arms at the small rim of their macrocyclic basket. The SCXRD and NMR results structurally characterised the complexes formed by referent bis-imidazole-calix[4]arene with Cu²⁺ and Zn²⁺. In solid-state (crystal), the bis-anilino derivative/Cu²⁺ complex, only upon exposure to the air, undergoes intramolecular dehydrogenative coupling of two neighbouring aniline units, yielding an azo bridge at the large rim of the calix[4]arene basket. In the biorelevant aqueous solution, the comparison of fluorometric titrations of referent calix[4]arene, with its analogues having one or two pyrene units grafted at the opposite (large) rim, revealed moderate-to-strong affinity towards transition metal cations, and, more importantly, a strong impact of pyrene on the binding affinity towards some cations. The pyrene arm(s) significantly diminished the affinity of the calix[4]arene-imidazole ligand towards Cu⁺ and strongly increased the affinity towards divalent Co²⁺ and Cd²⁺ cations. Moreover, the fluorometric response of some studied derivatives was strappingly sensitive to cation type. Since the counter-anion plays only a marginal role, such a change in selectivity is attributed to the intramolecular interaction of pyrene(s) with the calix[4]arene-imidazole system, sterically controlling the metal cation binding site. Full article

Performance analysis of the adsorptive separation of ethylene downstream of an oxidative coupling of methane (OCM) process, being an alternative process for converting methane content of natural gas or other methane-rich sources to ethylene, was studied in this research for a production capacity of 1 Mt/yr. This was motivated by observing promising adsorption characteristics and efficiency in the selective adsorption of ethylene using 13X zeolite-based sorbent. The energy and economic performance of alternative scenarios for retrofitting the adsorption unit into an integrated OCM process were analyzed. Simulations of the integrated OCM process scenarios include OCM unit, CO₂-hydrogenation, ethane dehydrogenation and methane reforming sections. The use of efficient ethylene adsorption separation enabled the improvement of the economic and energy efficiency of the integrated OCM process under specific operating conditions. For instance, the invested amount of energy and the associated energy cost per ton of ethylene in the cryogenic ethylene-purification section of the integrated process using adsorption unit are, respectively, 75% and 89% lower than the reference integrated OCM process. Under the conditions considered in this analysis, the return on investment for the final proposed integrated OCM process structure using adsorption separation was found to be less than 9 years, and the potential for further improvement was also discussed. Full article

Polymer research is currently focused on sustainable and degradable polymers which are cheap, easy to synthesize, and environmentally friendly. Silicon-based polymers are thermally stable and can be utilized in various applications, such as columns and coatings. Poly(silyl ether)s (PSEs) are an interesting class of silicon-based polymers that are easily hydrolyzed in either acidic or basic conditions due to the presence of the silyl ether Si-O-C bond. Synthetically, these polymers can be formed in several different ways, and the most effective and environmentally friendly synthesis is dehydrogenative cross coupling, where the byproduct is H₂ gas. These polymers have a lot of promise in the polymeric materials field due to their sustainability, thermal stability, hydrolytic degradability, and ease of synthesis, with nontoxic byproducts. In this review, we will summarize the synthetic approaches for the PSEs in the recent literature, followed by the properties and applications of these materials. A conclusion and perspective will be provided at the end. Full article

Isatropolone C from Streptomyces sp. CPCC 204095 features a fused cyclopentadienone-tropolone-oxacyclohexadiene tricyclic moiety in its structure. Herein, we report an isatropolone C dimer derivative, di-isatropolone C, formed spontaneously from isatropolone C in methanol. Notably, the structure of di-isatropolone C resolved by NMR reveals a newly formed cyclopentane ring to associate the two isatropolone C monomers. The configurations of four chiral carbons, including a ketal one, in the cyclopentane ring are assigned using quantum NMR calculations and DP4+ probability. The plausible molecular mechanism for di-isatropolone C formation is proposed, in which complex dehydrogenative C-C bond coupling may have happened to connect the two isatropolone C monomers. Like isatropolone C, di-isatropolone C shows the biological activity of inducing autophagy in HepG2 cells. Full article