Search Results (264)

Consumer interest in vegetarian, ethical, and clean-label foods is reviving the use of plant-derived milk coagulants. Cardosins from Cynara cardunculus (“thistle”) are aspartic proteases with strong clotting activity, yet their technological impact in cheese remains under-explored. This study compared a commercial thistle extract (PC) with traditional bovine rennet rich in chymosin (AC) during manufacture and 60-day ripening of Caciotta cheese. Classical compositional assays (ripening index, texture profile, color, solubility) were integrated with scanning electron microscopy, three-dimensional surface reconstruction, and descriptive sensory analysis. AC cheeses displayed slower but sustained proteolysis, yielding a higher and more linear ripening index, softer body, greater solubility, and brighter, more yellow appearance. Imaging revealed a continuous protein matrix with uniformly distributed, larger pores, consistent with a dairy-like sensory profile dominated by milky and umami notes. Conversely, PC cheeses underwent rapid early proteolysis that plateaued, producing firmer, chewier curds with lower solubility and darker color. Micrographs showed a fragmented matrix with smaller, heterogeneous pores; sensory evaluation highlighted vegetal, bitter, and astringent attributes. The data demonstrate that thistle coagulant can successfully replace animal rennet but generates cheeses with distinct structural and sensory fingerprints. The optimization of process parameters is therefore required when targeting specific product styles. Full article

Buffalo mozzarella cheese whey (CW) and ricotta cheese exhausted whey (RCEW) are valuable by-products of the Mozzarella di Bufala Campana PDO production chain. This study characterized their microbial communities using an integrated culture-dependent and -independent approach. Metabarcoding analysis revealed that the dominance of lactic acid bacteria (LAB), including Streptococcus thermophilus, Lactobacillus delbrueckii, and Lactobacillus helveticus, alongside diverse heat-resistant yeasts such as Cyberlindnera jadinii. Culture-based isolation identified subdominant lactic acid bacteria strains, not detected by sequencing, belonging to Leuconostoc mesenteroides, Enterococcus faecalis, and Enterococcus durans. These strains were further assessed for their probiotic potential. E. faecalis CW1 and E. durans RCEW2 showed tolerance to acidic pH, bile salts, and lysozyme, as well as a strong biofilm-forming capacity and antimicrobial activity against Bacillus cereus and Staphylococcus aureus. Moreover, bile salt resistance suggests potential functionality in cholesterol metabolism. These findings support the potential use of CW and RCEW as reservoirs of novel, autochthonous probiotic strains and underscore the value of regional dairy by-products in food biotechnology and gut health applications. Full article

The increasing demand for plant-based foods has led to significant growth in the availability, at a retail level, of plant-based cheese analogue products. This study presents the first comprehensive benchmarking of commercially available plant-based cheese analogue (PBCA) products in the Irish market, comparing them against conventional cheddar and processed dairy cheeses. A total of 16 cheese products were selected from Irish retail outlets, comprising five block-style plant-based analogues, seven slice-style analogues, two cheddar samples, and two processed cheese samples. Results showed that plant-based cheese analogues had significantly lower protein content (0.1–1.7 g/100 g) than cheddar (25 g/100 g) and processed cheese (12.9–18.2 g/100 g) and lacked a continuous protein matrix, being instead stabilized largely by solid fats, starch, and hydrocolloids. While cheddar showed the highest hardness, some plant-based cheeses achieved comparable hardness using texturizing agents but still demonstrated lower tan δ_max values, indicating inferior melting behaviour. Thermograms of differential scanning calorimetry presented a consistent single peak at ~20 °C across most vegan-based variants, unlike the dual-phase melting transitions observed in dairy cheeses. Sensory analysis further highlighted strong negative associations between PBCAs and consumer-relevant attributes such as flavour, texture, and overall acceptability. By integrating structural, functional, and sensory findings, this study identifies key formulation and performance deficits across cheese formats and provides direction for targeted improvements in next-generation PBCA product development. Full article

To advance the development of protein-rich plant-based foods, a novel binder system for vegan sausage alternatives without the requirement of heat application was investigated. This enables long-term ripening of plant-based analogs similar to traditional fermented meat or dairy products, allowing for refined flavor and texture development. This was achieved by using a poorly water-soluble calcium source (calcium carbonate) to introduce calcium ions into a low-ester pectin—gluten matrix susceptible to crosslinking via divalent ions. The gelling reaction of pectin–gluten dispersions with Ca²⁺ ions was time-delayed due to the gradual production of lactic acid during fermentation. Firm, sliceable matrices were formed, in which particulate substances such as texturized proteins and solid vegetable fat could be integrated, hence forming an unheated raw-fermented plant-based salami-type sausage model matrix which remained safe for consumption over 21 days of ripening. Gluten as well as pectin had a significant influence on the functional properties of the matrices, especially water holding capacity (increasing with higher pectin or gluten content), hardness (increasing with higher pectin or gluten content), tensile strength (increasing with higher pectin or gluten content) and cohesiveness (decreasing with higher pectin or gluten content). A combination of three simultaneously occurring effects was observed, modulating the properties of the matrices, namely, (a) an increase in gel strength due to increased pectin concentration forming more brittle gels, (b) an increase in gel strength with increasing gluten content forming more elastic gels and (c) interactions of low-ester pectin with the gluten network, with pectin addition causing increased aggregation of gluten, leading to strengthened networks. Full article

Food loss and waste from the European Union’s dairy supply chain, particularly in the management of fresh milk, imposes significant environmental burdens. This study demonstrates that implementing Radio Frequency Identification (RFID)-enabled digital decision-support tools can substantially reduce these impacts across the region. A cradle-to-grave life cycle assessment (LCA) was used to quantify both the additional environmental burdens from RFID (tag production, usage, and disposal) and the avoided burdens due to reduced milk losses in the farm, processing, and distribution stages. Within the EU’s fresh milk supply chain, the implementation of digital tools could result in annual net reductions of up to 80,000 tonnes of CO₂-equivalent greenhouse gas emissions, 81,083 tonnes of PM_2.5-equivalent particulate matter, 84,326 tonnes of land use–related carbon deficit, and 80,000 cubic meters of freshwater-equivalent consumption. Spatial analysis indicates that regions with historically high spoilage rates, particularly in Southern and Eastern Europe, see the greatest benefits from RFID enabled digital-decision support tools. These environmental savings are most pronounced during the peak months of milk production. Overall, the study demonstrates that despite the environmental footprint of RFID systems, their integration into the EU’S dairy supply chain enhances transparency, reduces waste, and improves resource efficiency—supporting their strategic value. Full article

The life-cycle carbon emissions (LCCE) assessment of dairy barns is crucial for identifying low-carbon transition pathways and promoting the sustainable development of the dairy industry. We applied a life cycle assessment approach integrated with building information modeling and EnergyPlus to establish a full life cycle inventory of the material quantities and energy consumption for dairy barns. The LCCE was quantified from the production to end-of-life stages using the carbon equivalent of dairy barns (CEDB) as the functional unit, expressed in kg CO₂e head⁻¹ year⁻¹. A carbon emission assessment model was developed based on the “building–process–energy” framework. The LCCE of the open barn and the lower profile cross-ventilated (LPCV) barn were 152 kg CO₂e head⁻¹ year⁻¹ and 229 kg CO₂e head⁻¹ year⁻¹, respectively. Operational carbon emissions (OCE) accounted for the largest share of LCCE, contributing 57% and 74%, respectively. For embodied carbon emissions (ECE), the production of building materials dominated, representing 91% and 87% of the ECE, respectively. Regarding carbon mitigation strategies, the use of extruded polystyrene boards reduced carbon emissions by 45.67% compared with stone wool boards and by 36% compared with polyurethane boards. Employing a manure pit emptying system reduced carbon emissions by 76% and 74% compared to manure scraping systems. Additionally, the adoption of clean electricity resulted in a 33% reduction in OCE, leading to an overall LCCE reduction of 22% for the open barn and 26% for the LPCV barn. This study introduces the CEDB to evaluate low-carbon design strategies for dairy barns, integrating building layout, ventilation systems, and energy sources in a unified assessment approach, providing valuable insights for the low-carbon transition of agricultural buildings. Full article

As the primary biological risk threatening safe dairy production, bovine mastitis control highly relies on environmental disinfection measures. However, the mechanisms by which chemical disinfectants influence host–environment microbial interactions remain unclear. This study systematically investigated the disinfection efficacy and regulatory effects on microbial community composition and diversity of glutaraldehyde-benzalkonium chloride (BAC) and glutaraldehyde-didecyl dimethyl ammonium bromide (DAB) at recommended concentrations (2–5%), using 80 environmental samples from intensive dairy farms in Xinjiang, China. Combining 16S rDNA sequencing with culturomics, the results showed that BAC achieved a disinfection rate of 99.33%, higher than DAB’s 97.87%, and reduced the environment–gut microbiota similarity index by 23.7% via a cationic bacteriostatic film effect. Microbiome analysis revealed that BAC selectively suppressed Fusobacteriota abundance (15.67% reduction) and promoted Bifidobacterium proliferation (7.42% increase), enhancing intestinal mucosal barrier function through butyrate metabolism. In contrast, DAB induced Actinobacteria enrichment in the environment (44.71%), inhibiting pathogen colonization via bioantagonism. BAC’s long-acting bacteriostatic properties significantly reduced disinfection costs and mastitis incidence. This study first elucidated the mechanism by which quaternary ammonium compound (QAC) disinfectants regulate host health through “environment-gut” microbial interactions, providing a critical theoretical basis for developing precision disinfection protocols integrating “cost reduction-efficiency enhancement-risk mitigation.” Full article

The authenticity of Protected Designation of Origin (PDO) Feta cheese is critical for consumer confidence and market integrity, particularly in light of widespread concerns over economically motivated adulteration. This study evaluated the potential of Attenuated Total Reflectance–Fourier Transform Infrared (ATR-FTIR) spectroscopy combined with chemometric modeling to differentiate authentic Feta from non-Feta white brined cheeses. A total of 90 cheese samples, consisting of verified Feta and cow milk cheeses, were analyzed in both freeze-dried and fresh forms. Spectral data from raw, first derivative, and second derivative spectra were analyzed using principal component analysis–linear discriminant analysis (PCA-LDA) and Partial Least Squares Discriminant Analysis (PLS-DA) to distinguish authentic Feta from non-Feta cheese samples. Derivative processing significantly improved classification accuracy. All classification models performed relatively well, but the PLS-DA model applied to second derivative spectra of freeze-dried samples achieved the best results, with 95.8% accuracy, 100% sensitivity, and 90.9% specificity. The most consistently highlighted discriminatory regions across models included ~2920 cm⁻¹ (C–H stretching in lipids), ~1650 cm⁻¹ (Amide I band, corresponding to C=O stretching in proteins), and the 1300–900 cm⁻¹ range, which is associated with carbohydrate-related bands. These findings support ATR-FTIR spectroscopy as a rapid, non-destructive tool for routine Feta authentication. The approach offers promise for enhancing traceability and quality assurance in high-value dairy products. Full article

Milk is a nutritionally rich food and a frequent target of economically motivated adulteration, particularly through substitution with lower-cost milk types. Over the past decade, significant progress has been made in the authentication of milk using advanced proteomic and chemometric approaches, with a focus on the discovery and application of protein and peptide biomarkers for species differentiation and fraud detection. Recent innovations in both top-down and bottom-up proteomics have markedly improved the sensitivity and specificity of detecting key molecular targets, including caseins and whey proteins. Peptide-based methods are especially valuable in processed dairy products due to their thermal stability and resilience to harsh treatment, although their species specificity may be limited when sequences are conserved across related species. Robust chemometric approaches are increasingly integrated with proteomic pipelines to handle high-dimensional datasets and enhance classification performance. Multivariate techniques, such as principal component analysis (PCA) and partial least squares discriminant analysis (PLS-DA), are frequently employed to extract discriminatory features and model adulteration scenarios. Despite these advances, key challenges persist, including the lack of standardized protocols, variability in sample preparation, and the need for broader validation across breeds, geographies, and production systems. Future progress will depend on the convergence of high-resolution proteomics with multi-omics integration, structured data fusion, and machine learning frameworks, enabling scalable, specific, and robust solutions for milk authentication in increasingly complex food systems. Full article

The article examines the application of collaborative robots (cobots) as a modern engineering tool for the transformation of the food industry following the principles of Industry 5.0. A conceptual engineering model has been developed that integrates collaborative robots with IoT systems, digital twins, and predictive analytics to increase the flexibility, safety, and sustainability of production processes. The proposed model is validated through a practical case study focused on a yogurt packaging line in the dairy sector, where cobot systems demonstrate a significant improvement in operational efficiency and process safety. A step-by-step strategic roadmap is presented to guide industrial enterprises through the various stages of implementation, from the initial assessment to the full-scale integration of solutions. Additionally, a comparative analysis has been performed between traditional automated systems and the integrated approach with collaborative robots, which highlights the technological, economic, and human-oriented advantages of the latter. The results of the study confirm that collaborative robotics offers an effective and applicable path for transforming the food and beverage industry towards a sustainable, adaptive, and human-centered manufacturing ecosystem characteristic of Industry 5.0. Full article

Cheese production is an ancient practice that is associated with the food and cultural identity of different peoples. There are over 500 cheese types globally, including 207 with protected denomination of origin (PDO) and 70 with protected geographical indication (PGI) status in the European Union (EU). Each cheese has various biochemical compositions, production methods, and maturation environments. This study has provided a critical review of the environmental impacts of cheese production, focusing on energy consumption, greenhouse gas (GHG) emissions, and the integration of renewable energy sources as sustainable strategies for this sector. Based on case studies and life cycle assessment (LCA) methodologies, the analysis revealed significant variability in energy use (3.0 to 70.2 MJ/kg) and GHG emissions (up to 22.13 kg CO₂ eq/kg), influenced by factors such as the cheese type, production complexity, system boundaries, and the technological or geographical context. Particular attention was given to heat treatment, refrigeration, and maturation processes, which contribute substantially to the overall energy footprint. The paper also discusses the methodological challenges in LCA studies, including the role of co-product allocation and database limitations. Finally, strategic renewable energy options, such as biogas recovery and solar thermal integration, are discussed as sustainable alternatives to reduce the environmental footprint of the dairy sector and support its sustainability. Full article

Accurate body condition score (BCS) monitoring in dairy cows is essential for optimizing health, productivity, and welfare. Traditional manual scoring methods are labor-intensive and subjective, driving interest in automated imaging-based systems. This study evaluated the effectiveness of 2D imaging and deep learning for BCS classification using three camera perspectives—front, back, and top-down—to identify the most reliable viewpoint. The research involved 56 Norwegian Red milking cows at the Center for Livestock Experiments (SHF) of Norges Miljo-og Biovitenskaplige Universitet (NMBU) in Norway. Images were classified into BCS categories of 2.5, 3.0, and 3.5 using a YOLOv8 model. The back view achieved the highest classification precision (mAP@0.5 = 0.439), confirming that key morphological features for BCS assessment are best captured from this angle. Challenges included misclassification due to overlapping features, especially in Class 2.5 and background data. The study recommends improvements in algorithmic feature extraction, dataset expansion, and multi-view integration to enhance accuracy. Integration with precision farming tools enables continuous monitoring and early detection of health issues. This research highlights the potential of 2D imaging as a cost-effective alternative to 3D systems, particularly for small and medium-sized farms, supporting more effective herd management and improved animal welfare. Full article

The increasing demand for plant-based cheese alternatives reflects a shift toward healthier and more sustainable food choices. This study aimed to map technological trends, formulation strategies, and major challenges in the development of plant-based cheese analogues through a systematic review of the scientific literature and patents. Following the PRISMA protocol, searches were conducted in ScienceDirect and Lens.org between December 2024 and January 2025 using keywords related to cheese analogues. A total of 1553 scientific articles and 155 patents were initially retrieved. After applying inclusion and exclusion criteria, 88 articles and 66 patents were selected for detailed analysis. The results show a growing interest in this field since 2020, peaking in 2024. Data from 2025 may be limited due to the search period. Keywords were clustered into three main areas: (1) Formulation and Composition, (2) Texture and Processing, and (3) Food Safety and Consumer Acceptance. The United States leads in patent registrations (59). Valio Company and Cargill were the most active assignees, with nine and eight patents, respectively. This study highlights the importance of integrating food science and technology to improve the quality, sensory attributes, and market competitiveness of plant-based cheese analogues compared to traditional dairy products. Full article

The historical co-production of olive oil and wine has influenced the Mediterranean landscape and economy. Olive oil and wine production generates substantial organic waste, including olive pomace, grape pomace, and wastewater, which poses environmental challenges if untreated. These byproducts contain bioactive compounds, including polyphenols, such as hydroxytyrosol, resveratrol, and flavonoids, which possess antioxidant and anti-inflammatory properties, making them valuable for the development of functional foods and nutraceuticals. A combined waste valorization strategy can enhance bioactive compound recovery and align it with circular economic principles. The incorporation of olive oil and wine byproducts into food matrices, such as bread, pasta, dairy products, baked goods, chocolates, beverages, and processed items, has been explored to enhance antioxidant content, dietary fiber, and nutritional value. However, successful integration depends on maintaining acceptable sensory qualities and addressing the technical challenges in extraction, processing, and regulatory compliance. Realizing the potential benefits of dual valorization requires a systemic shift integrating scientific innovation, regulatory adaptability, and consumer engagement, guided by evidence, transparent communication, and inclusive governance to ensure that sustainability goals translate into environmental, economic, and public health outcomes. Full article

Dairy mastitis is a common dairy farming disease. It severely affects the health of dairy cows and the quality and yield of dairy products. This paper reviews the main current mastitis treatments and associated bacterial resistance. It emphasizes the importance of integrated resistance and treatment management. The therapeutic efficacy and resistance associated with commonly used antibiotics such as penicillin, cephalosporins, macrolides and fluoroquinolones are analyzed. The principles, application effects and benefits of non-antibiotic therapies are also discussed, including those of immunotherapy, herbal therapy, probiotic therapy and phage therapy. The paper presents the latest gene editing and nanotechnology advances in the contexts of big data and artificial intelligence. It suggests future research directions such as developing new antibiotics, optimizing treatment and enhancing immunity. In conclusion, effective treatment and management can control dairy cow mastitis. It can guarantee cow health, improve dairy product quality and promote sustainable dairy industry development. Full article