Search Results (37)

Optical image stabilization (OIS) is crucial for improving airborne opto-electronic imaging performance under dynamic conditions. This study presents a two-dimensional piezoelectric-driven OIS platform capable of compensating linear image shift errors. A motion platform integrating a bridge amplification mechanism and right-angle guiding beams was developed, and its theoretical model was validated through finite element analysis (FEA). To enhance the platform’s repeatability, the hysteresis of the piezoelectric actuator was described using the Bouc-Wen model, and was optimized using a Hybrid Genetic Algorithm and Particle Swarm Optimization (HGAPSO). Experimental results demonstrated that the platform achieves a workspace of 53.92 μm × 53.76 μm, a motion resolution of 30 nm, a maximum coupling error of 2.28%, and a first-order resonant frequency of 356.69 Hz. A composite controller incorporating HGAPSO attained submicron tracking accuracy, with errors of 0.43 μm and 0.47 μm along the X and Y axes, respectively. Strong agreement among theoretical analysis, FEA, and experimental results confirms the platform’s precision and effectiveness meeting the requirements of the OIS. This work provides valuable guidance for the development of high-frequency OIS systems in highly dynamic operational environments. Full article

Zinc oxide (ZnO) thin films were deposited by radio-frequency reactive magnetron sputtering at a cryogenic substrate temperature of −78 °C to explore a novel low-thermal-budget route for semiconductor growth. Despite the extremely low temperature, X-ray diffraction revealed spontaneous partial crystallization of wurtzite ZnO upon warming to room temperature, driven by strain relaxation and stress coupling at the ZnO/SiO₂ interface. Atomic-force and scanning-electron microscopies confirmed nanoscale hillock and ridge morphologies that correlate with in-plane compressive stress and out-of-plane tensile strain. Spectroscopic ellipsometry, modeled using a general oscillator (GO) mathematical model approach, determined a film thickness of 60.81 nm, surface roughness of 3.75 nm, and a direct optical bandgap of 3.40 eV. Photoluminescence spectra exhibited strong near-band-edge emission modulated with LO-phonon replicas at 300 K, indicating robust exciton–phonon coupling. This study demonstrates that ZnO films grown at cryogenic conditions can undergo substrate-induced self-crystallize upon warming, which eliminates the need for thermal annealing. The introduced cryogenic self-crystallization regime offers a new pathway for depositing crystalline semiconductors on thermally sensitive or flexible substrates where heating is undesirable, enabling future optoelectronic and photonic device fabrication under ultra-low thermal-budget conditions. Full article

Light–matter interactions in optical microcavities attract much attention due to their potential for controlling properties of materials. Among the various types of optical microcavities, porous silicon microcavities (pSiMCs) are of special interest because of their relatively simple fabrication procedure, tunable porosity, and large specific surface area, which make them highly suitable for a wide range of optoelectronic and sensing applications. However, the fabrication of pSiMCs with precisely controlled parameters, which is crucial for effective light–matter coupling, remains challenging due to the multiple variables involved in the process. In addition, the parameter characterizing the capacity of pSiMCs for confining light inside the cavity (the quality factor, QF) rarely exceeds 100. Here, we present advanced methods and protocols for controlled fabrication of pSiMCs at room temperature, combining theoretical and numerical simulations and experimental validation of microcavity structural parameters for enhancing light–matter interactions. This systemic approach has been used to design and fabricate pSiMCs with an about twofold increased QF and correspondingly improved optical performance; the theoretical modeling shows that its further development is expected to increase the QF even more. In addition, we fabricated hybrid fluorescencent structures with the R6G dye embedded into the optimized pSiMCs. This provided a 5.8-fold narrowing of the R6G fluorescence spectrum caused by light–matter coupling, which indicated enhancement of the fluorescence signal at the eigenmode wavelength due to an increased rate of spontaneous emission in the cavity. The proposed methodology offers precise theoretical simulation of microcavities with the parameters required for specific practical applications, which facilitates optimization of microcavity design. The controllable optical properties of pSiMCs make them promising candidates for a wide range of applications where improved spectral resolution, and increased luminescence efficiency are required. This paves the way for further innovations in photonic systems and optoelectronic devices. Full article

Aiming at the control challenges of strong nonlinearity, time-varying parameters and multi-channel disturbance coupling in multi-address laser communication networking caused by the common inertial reference of multi-directional mirror strapdown stabilized platforms, a genetic algorithm-optimized active disturbance rejection control (GA-ADRC) method is proposed. By constructing a distributed active disturbance rejection control (ADRC) architecture and using genetic algorithms to globally and collaboratively optimize the observer gain and control parameters, the disturbance suppression and dynamic decoupling of multi-variable systems are effectively achieved. Experimental results show that under 0.1–0.3 Hz base disturbances, this method improves the line of sight (LOS) stabilization accuracy by 28–32%, with a standard deviation better than 14 μrad, significantly outperforming traditional PID control. This research not only provides a high-accuracy control solution that does not rely on precise models for multi-LOS cooperative stabilization but also offers a generalizable theoretical and practical framework for the intelligent control of complex optoelectronic systems. Full article

This work investigates a comprehensive temperature-dependent photoluminescence (PL) study (7–300 K) of β-Ga₂O₃ single crystals under 250 nm excitation. The emission consists of three competing bands at ~3.55 eV (J₁), ~3.37 eV (J₂), and ~3.07 eV (J₃), exhibiting a redshift, band broadening, and a crossover near ~140 K with increasing temperature. The novelty of this study lies in the first quantitative investigation of the temperature-dependent photoluminescence of undoped β-Ga₂O₃ single crystals, revealing activation, trap-release, and phonon-coupling parameters that define the competition between STE (Self-trapped exciton)- and DAP-related emission channels. A two-channel Arrhenius analysis of global thermal quenching at E_max (at maximum PL), J₁, and J₂ reveals a common shallow barrier (E₁ = 7–12 meV) alongside deeper, band-specific barriers (E₂ = 27 meV for J₁ and 125 meV for J₂). The J₃ band shows non-monotonic intensity (dip–peak–quench) reproduced by a trap-assisted generation model with a release energy E_rel = 50 meV. Linewidth analysis yields effective phonon energies (E_ph ≈ 40–46 meV), indicating strong electron–phonon coupling and a transition to multi-phonon broadening at higher temperatures. These results establish a coherent picture of thermally driven redistribution from near-edge STE-like states to deeper defect centers and provide quantitative targets (activation and phonon energies) for defect engineering in β-Ga₂O₃-based optoelectronic and scintillation materials. Full article

Strong coupling between plasmons and excitons in two-dimensional materials offers a powerful route for manipulating light–matter interactions at the nanoscale, with potential applications in quantum optics, nanophotonics, and polaritonic devices. Here, we design and numerically investigate a low-loss coupling platform composed of a silver nanocuboid dimer and monolayer of WS₂ using finite-difference time-domain (FDTD) simulations. The dimer supports a subradiant bonding plasmonic mode with a linewidth as narrow as 60 meV. This ultralow-loss feature enables strong coupling with monolayer WS₂ at relatively low coupling strengths. FDTD simulations combined with the coupled oscillator model reveal a Rabi splitting of ~60 meV and characteristic anticrossing behavior in the dispersion relations. Importantly, we propose and demonstrate two independent tuning mechanisms—loss engineering through nanocuboid tilt and coupling-strength modulation through the number of WS₂ layers—that enable transitions between weak and strong coupling regimes. This work provides a low-loss and tunable plasmonic platform for studying and controlling strong light–matter interactions in plasmon-two-dimensional material systems, with potential for room-temperature quantum and optoelectronic devices. Full article

This study investigates the influence of rotation on wave propagation in a semiconducting nanostructure thermoelastic solid subjected to a ramp-type heat source within a two-temperature model. The thermoelastic interactions are modeled using the two-temperature theory, which distinguishes between conductive and thermodynamic temperatures, providing a more accurate description of thermal and mechanical responses in semiconductor materials. The effects of rotation, ramp-type heating, and semiconductor properties on elastic wave propagation are analyzed theoretically. Governing equations are formulated and solved analytically, with numerical simulations illustrating the variations in thermal and elastic wave behavior. The key findings highlight the significant impact of rotation, nonlocal parameters $e_{0}a$, and time derivative fractional order (FO) $\alpha$ on physical quantities, offering insights into the thermoelastic performance of semiconductor nanostructures under dynamic thermal loads. A comparison is made with the previous results to show the impact of the external parameters on the propagation phenomenon. The numerical results show that increasing the rotation rate $\mathsf{\Omega }=5$ causes a phase lag of approximately 22% in thermal and elastic wave peaks. When the thermoelectric coupling parameter ${\mathsf{\epsilon }}_3$ is increased from $-0.8\times {10}^{-42}$ to $1.2\times {10}^{-42}$. The temperature amplitude rises by 17%, while the carrier density peak increases by over 25%. For nonlocal parameter values $\mathsf{\epsilon }=0.3\to 0.6$, high-frequency stress oscillations are damped by more than 35%. The results contribute to the understanding of wave propagation in advanced semiconductor materials, with potential applications in microelectronics, optoelectronics, and nanoscale thermal management. Full article

The non-metallic armored optoelectronic cable (NAOC) serves as a critical component in deep-sea scientific winch systems. Due to its low density and excellent corrosion resistance, it has been widely adopted in marine exploration. However, as the operational water depth increases, the NAOC is subjected to multi-layer winding on the drum, resulting in a cumulative temperature rise that can severely impair insulation performance and compromise the safety of deep-sea operations. To address this issue, this paper conducts temperature rise experiments on NAOCs using a distributed temperature sensing test rig to investigate the effects of the number of winding layers and current amplitude on their temperature rise characteristics. Based on the experimental results, an electromagnetic thermal multi-physics field coupling simulation model is established to further examine the influence of these factors on the maximum operation time of the NAOC. Finally, a multi-variable predictive model for maximum operation time is developed, incorporating current amplitude, the number of winding layers, and ambient temperature, with a fitting accuracy of 97.92%. This research provides theoretical and technical support for ensuring the safety of deep-sea scientific operations and improving the reliability of deep-sea equipment. Full article

This paper investigates strain-, twist-, and electric-field-tuned optical absorption in bilayer MoS₂, emphasizing spin-orbit coupling (SOC). A continuum model reveals competing mechanisms: geometric perturbations (strain/twist) and Stark effects govern one-/two-photon absorption, with critical thresholds (~9% strain, ~2.13° twist) switching spin-independent to spin-polarized regimes. Strain gradients and twist enhance nonlinear responses through symmetry-breaking effects while electric fields dynamically modulate absorption via band alignment tuning. By linking parameter configurations to absorption characteristics, this work provides a framework for designing tunable spin-resolved optoelectronic devices and advancing light–matter control in 2D materials. Full article

The realization of high-precision target positioning requires the systematic suppression of nonlinear perturbations in the UAV optoelectronic system and the optimization of the cumulative deviation of coordinate transformations through error transfer modeling. This study proposes an error allocation method based on the improved raccoon optimization algorithm (KYCOA) to resolve the problem of degradation of positioning accuracy due to multi-source error coupling during UAV target positioning. Firstly, a multi-coordinate system transformation model is established to analyze the nonlinear transfer characteristics of the error, and the Taylor expansion is used to linearize the error transfer process and derive the synthetic error model under the geocentric coordinate system. Secondly, the KYCOA is proposed to optimize the error allocation by combining the good point set initialization strategy to enhance the population diversity, and the golden sine algorithm to improve the position updating mechanism in response to the defect of the traditional optimization algorithm, which easily falls into the local optimum. Simulation experiments show that the positioning error distance of the KYCOA is reduced by 66.75%, 41.89%, and 62.06% when compared with that of the original Coati Optimization Algorithm (COA), Grey Wolf Optimizer (GWO), and Whale Optimization Algorithm (WOA), respectively. In the real flight test, the target point localization error of the KYCOA is reduced by more than 40% on average when compared with that of other algorithms, which verifies the effectiveness of the proposed method in improving the target localization accuracy and robustness of UAVs. Full article

4H-silicon carbide (4H-SiC) is a cornerstone for next-generation optoelectronic and power devices owing to its unparalleled thermal, electrical, and optical properties. However, its chemical inertness and low dopant diffusivity for most dopants have historically impeded effective doping. This study unveils a transformative laser-assisted boron doping technique for n-type 4H-SiC, employing a pulsed Nd:YAG laser (λ = 1064 nm) with a liquid-phase boron precursor. By leveraging a heat-transfer model to optimize laser process parameters, we achieved dopant incorporation while preserving the crystalline integrity of the substrate. A novel optical characterization framework was developed to probe laser-induced alterations in the optical constants—refraction index ($\mathrm{n}$) and attenuation index ($\mathrm{k}$)—across the MIDIR spectrum (λ = 3–5 µm). The optical properties pre- and post-laser doping were measured using Fourier-transform infrared spectrometry, and the corresponding complex refraction indices were extracted by solving a coupled system of nonlinear equations derived from single- and multi-layer absorption models. These models accounted for the angular dependence in the incident beam, enabling a more accurate determination of $\mathrm{n}$ and $\mathrm{k}$ values than conventional normal-incidence methods. Our findings indicate the formation of a boron-acceptor energy level at 0.29 eV above the 4H-SiC valence band, which corresponds to λ = 4.3 µm. This impurity level modulated the optical response of 4H-SiC, revealing a reduction in the refraction index from 2.857 (as-received) to 2.485 (doped) at λ = 4.3 µm. Structural characterization using Raman spectroscopy confirmed the retention of crystalline integrity post-doping, while secondary ion mass spectrometry exhibited a peak boron concentration of 1.29 × 10¹⁹ cm⁻³ and a junction depth of 450 nm. The laser-fabricated p–n junction diode demonstrated a reverse-breakdown voltage of 1668 V. These results validate the efficacy of laser doping in enabling MIDIR tunability through optical modulation and functional device fabrication in 4H-SiC. The absorption models and doping methodology together offer a comprehensive platform for paving the way for transformative advances in optoelectronics and infrared materials engineering. Full article

Diamond, widely used in optoelectronic devices, plays a crucial role in improving performance through studies of its electronic structure and optoelectronic response. This study combines computational methods and experiments for analysis. Density functional theory calculates the diamond’s band structure and refractive index, while the Keldysh formula determines the laser intensity at the critical plasma density by evaluating laser-induced free electron density. By integrating the coupled model with a multi-physics field associative assignment, the critical plasma length in the diamond is further simulated. Experimentally, pump-probe techniques examine the diamond’s response under varying pulse widths and energies. Results show that increasing laser energy extends both plasma and damage lengths. As pulse width increases, plasma length first decreases and then increases, while graphitization length shows the opposite trend. Experiments show that laser energy enhancement significantly expands the plasma morphology by enhancing the nonlinear ionization effect. When the pulse width exceeds the electron-lattice relaxation time, the lattice energy deposition triggers localized graphitization, which enhances the subsequent laser absorption, and the final plasma distribution shows a high spatial correlation with the graphitized regions. Full article

Distributed Acoustic Sensing (DAS) has emerged as a groundbreaking technology in seismology, transforming fiber-optic cables into dense, cost-effective seismic monitoring arrays. DAS makes use of Rayleigh backscattering to detect and measure dynamic strain and vibrations over extended distances. It can operate using both pre-existing telecommunication networks and specially designed fibers. This review explores the principles of DAS, including Coherent Optical Time Domain Reflectometry (COTDR) and Phase-Sensitive OTDR (ϕ-OTDR), and discusses the role of optoelectronic interrogators in data acquisition. It examines recent advancements in fiber design, such as helically wound and engineered fibers, which improve DAS sensitivity, spatial resolution, and the signal-to-noise ratio (SNR). Additionally, innovations in deployment techniques include cemented borehole cables, flexible liners, and weighted surface coupling to further enhance mechanical coupling and data accuracy. This review also demonstrated the applications of DAS across earthquake detection, microseismic monitoring, reservoir characterization and monitoring, carbon storage sites, geothermal reservoirs, marine environments, and urban infrastructure surveillance. The study highlighted several challenges of DAS, including directional sensitivity limitations, vast data volumes, and calibration inconsistencies. It also addressed solutions to these problems, such as advances in signal processing, noise suppression techniques, and machine learning integration, which have improved real-time analysis and data interpretability, enabling DAS to compete with traditional seismic networks. Additionally, modeling approaches such as full waveform inversion and forward simulations provide valuable insights into subsurface dynamics and fracture monitoring. This review highlights DAS’s potential to revolutionize seismic monitoring through its scalability, cost-efficiency, and adaptability to diverse applications while identifying future research directions to address its limitations and expand its capabilities. Full article

The synthesis of 2D MoWS₂ nanosheets involved the liquid-phase exfoliation technique was explored in this paper. The nonlinear optical response of MoWS₂ was characterized in the 1 µm wavelength range, and its suitability as a saturable absorber (SA) was confirmed. Experimental demonstrations were conducted by using MoWS₂ as an SA in an idler-resonant intracavity KTA optical parametric oscillator (OPO) driven by a dual-loss-modulated Q-switched and mode-locked (QML) YVO₄/Nd:YVO₄ laser with an acousto-optic modulator (AOM). By appropriately tuning the pump power and the AOM repetition rate, the Q-switched envelope pulse widths for the signal and idler waves could be significantly reduced to be shorter than the cavity round-trip transit time, i.e., the interval between two neighboring mode-locking pulses. Consequently, this enabled the generation of sub-nanosecond single mode-locking pulses with a low repetition rate, high pulse energy, and remarkable stability. With a repetition rate of 1 kHz and maximal pulse energies of 318 µJ and 169 µJ, respectively, sub-nanosecond single mode-locking pulses of the signal and idler waves were generated. The theoretical model was established using coupled rate equations with a Gaussian spatial distribution approximation. The numerical simulation results for generating sub-nanosecond single mode-locking pulses for the signal and idler waves within their respective Q-switched envelopes aligned fundamentally with the experimental results, proving that MoWS₂ can be a potential nanomaterial for further optoelectronic applications. Full article

To investigate the impact of electrode structure on Electrical Stimulation Therapy (EST) for chronic wound healing, this study designed three variants of flexible microelectrodes (FMs) with Ag-Cu coverings (ACCs), each exhibiting distinct geometrical configurations: hexagonal, cross-shaped, and serpentine. These were integrated with PPY/PDA/PANI (3/6) (full name: polypyrrole/polydopamine/polyaniline 3/6). Hydrogel dressing comprehensive animal studies, coupled with detailed electrical and mechanical modeling and simulations, were conducted to assess their performance. Results indicated that the serpentine-shaped FM outperformed its counterparts in terms of flexibility and safety, exhibiting minimal thermal effects and a reduced risk of burns. Notably, FMs with metal coverings under 3% demonstrated promising potential for optoelectronic self-powering capabilities. Additionally, simulation data highlighted the significant influence of hydrogel non-uniformity on the distribution of electrical properties across the skin surface, providing critical insights for optimizing EST protocols when employing hydrogel dressings. Full article