Search Results (127)

This study experimentally validates a solar-thermal desalination system equipped with predictive feedwater control guided by real-time solar forecasting. Unlike conventional systems that react to temperature changes, the proposed approach proactively adjusts feedwater flow in anticipation of solar variability. To assess environmental and financial sustainability, the study integrates this control logic with a full Life Cycle Assessment (LCA) and Techno-Economic Analysis (TEA). Field testing in a high-temperature, arid region demonstrated strong performance, achieving a Global Warming Potential (GWP) of 1.80 kg CO₂-eq/m³ and a Levelized Cost of Water (LCOW) of $0.88/m³. Environmental impacts were quantified using OpenLCA and ecoinvent datasets, covering climate change, acidification, and eutrophication categories. The TEA confirmed economic feasibility, reporting a positive Net Present Value (NPV) and an Internal Rate of Return (IRR) exceeding 11.5% over a 20-year lifespan. Sensitivity analysis showed that forecast precision and TES design strongly influence both environmental and economic outcomes. The integration of intelligent control with simplified thermal storage offers a scalable, cost-effective solution for off-grid freshwater production in solar-rich regions. Full article

Interfacial solar evaporation has emerged as a promising strategy for freshwater production, where 3D evaporators offer distinct advantages in heat management and salt rejection. Freeze–thaw cycling is a widely adopted fabrication method for 3D hydrogel evaporators, yet the impact of preparation conditions (e.g., freezing temperature) on their evaporation performance remains poorly understood, hindering rational optimization of fabrication protocols. Herein, we report the fabrication of chitosan-based hydrogel evaporators via freeze–thaw cycles at different freezing temperatures (−20 °C, −40 °C, and −80 °C), leveraging its low cost and environmental friendliness. Characterizations of crosslinking density and microstructure reveal a direct correlation between freezing temperature and network porosity, which significantly influences evaporation rate, photothermal conversion efficiency, and anti-salt performance. It is noteworthy that the chitosan hydrogel prepared at −80 °C demonstrates an excellent evaporation rate in high-salinity environments and exhibits superior salt resistance during continuous evaporation testing. Long-term cyclic experiments indicate that there was an average evaporation rate of 3.76 kg m⁻² h⁻¹ over 10 cycles, with only a 2.5% decrease observed in the 10th cycle. This work not only elucidates the structure–property relationship of freeze–thaw fabricated hydrogels but also provides a strategic guideline for tailoring evaporator architectures to different salinity conditions, bridging the gap between material design and practical seawater desalination. Full article

With an increasingly more urbanised global population, surface water and groundwater resources are being/have become outpaced by growing demand. The oceans could address this pertinent scarcity issue, once their high-salinity content is removed. Water desalination could thus be a crucial pathway towards addressing global water scarcity. However, conventional desalination is known to be highly energy-intensive, with limited scalability and potentially significant negative environmental impacts. Multi-criteria Decision Making (MCDM) presents a novel approach towards sustainable water desalination based on sustainability-related criteria. The Fuzzy Analytical Hierarchy Process (FAHP) was implemented to determine the most optimal small-scale, modularised, and remote reverse osmosis (RO) desalination plant configurations. Twelve configurations were assessed, based on four plant capacities (50, 100, 150, and 200 m³/day) and three diesel-to-solar photovoltaic energy configurations (100–0%, 75–25%, and 60–40%). The hybridised diesel-to-solar configurations were generally ranked higher, particularly when less reliant on diesel, and at small(er) capacities, in terms of the criteria: sustainability, overall efficiency, and standalone potential while maintaining competitive costs. This can likely be attributed to their relatively lower fuel and energy consumption and associated costs. Further research should aim to consider additional criteria, such as battery cost, as well as life cycle assessments that include transportation-related costs/emissions. Full article

Solar-driven interfacial evaporation desalination is regarded as a promising solution to address freshwater scarcity. However, salt deposition remains a significant challenge. While structural designs such as designated deposition sites can control crystallization, the mechanisms of salt precipitation at specific locations are still unclear. In the present work, we designed a three-dimensional conical evaporator using low-cost cellulose paper for efficient solar-driven desalination. This innovative evaporator design achieves controlled salt crystallization by meticulously balancing the rates of salt diffusion and accumulation, thereby directing salt precipitation to a predetermined location approximately 1.4 cm above the conical base. This phenomenon arises from temperature variations across the evaporator’s three-dimensional surface, which induce differences in water surface tension and create favorable sites for salt precipitation. Such a salt management strategy allows for continuous operation for up to 8 h in high-salinity conditions (24.5 wt.%) without compromising performance. Under one sun irradiation, the evaporator demonstrates exceptional performance, with an evaporation rate of 2.54 kg·m⁻²·h⁻¹ and an impressive energy conversion efficiency of 93.7%. This approach provides valuable insights into the salt precipitation mechanism, contributing to the future design of three-dimensional evaporators and innovative salt collection strategies. Full article

Energy-efficient and cost-effective water desalination systems can significantly replenish freshwater reserves without further stressing limited energy resources. Currently, the majority of the desalination systems are operated by non-renewable energy sources such as fossil fuel power plants. The viability of any desalination process depends primarily on the type and amount of energy it utilizes and on the product recovery. In recent years, membrane distillation (MD) and forward osmosis (FO) have drawn the attention of the scientific community because of FO’s low energy demand and the potential of MD operation with low-grade heat or a renewable source like geothermal, wind, or solar energy. Despite the numerous potential advantages of MD and FO, there are still some limitations that negatively affect their performance associated with the water–energy nexus. This critical review focuses on the hybrid forward osmosis–membrane distillation (FO-MD) processes, emphasizing energy demand and product quality. It starts with exploring the limitations of MD and FO as standalone processes and their performance. Based on this, the importance of combining these technologies into an FO-MD hybrid process and the resulting strengths of it will be demonstrated. The promising applications of this hybrid process and their advantages will be also explored. Furthermore, the performance of FO-MD processes will be compared with other hybrid processes like FO–nanofiltration (FO-NF) and FO–reverse osmosis (FO-RO). It will be outlined how the FO-MD hybrid process could outperform other hybrid processes when utilizing a low-grade heat source. In conclusion, it will be shown that the FO-MD hybrid process can offer a sustainable solution to address water scarcity and efficiently manage the water–energy nexus. Full article

This study evaluates the feasibility of repurposing produced water—an abundant byproduct of hydrocarbon extraction—for green hydrogen production in Wyoming, USA. Analysis of geospatial distribution and production volumes reveals that there are over 1 billion barrels of produced water annually from key basins, with a general total of dissolved solids (TDS) ranging from 35,000 to 150,000 ppm, though Wyoming’s sources are often at the lower end of this spectrum. Optimal locations for hydrogen production hubs have been identified, particularly in high-yield areas like the Powder River Basin, where the top 2% of fields contribute over 80% of the state’s produced water. Detailed water-quality analysis indicates that virtually all of the examined sources exceed direct electrolyzer feed requirements (e.g., <2000 ppm TDS, <0.1 ppm Fe/Mn for target PEM systems), necessitating pre-treatment. A review of advanced treatment technologies highlights viable solutions, with estimated desalination and purification costs ranging from USD 0.11 to USD 1.01 per barrel, potentially constituting 2–6% of the levelized cost of hydrogen (LCOH). Furthermore, Wyoming’s substantial renewable-energy potential (3000–4000 GWh/year from wind and solar) could sustainably power electrolysis, theoretically yielding approximately 0.055–0.073 million metric tons (MMT) of green hydrogen annually (assuming 55 kWh/kg H₂), a volume constrained more by energy availability than water supply. A preliminary economic analysis underscores that, while water treatment (2–6% LCOH) and transportation (potentially > 10% LCOH) are notable, electricity pricing (50–70% LCOH) and electrolyzer CAPEX (20–40% LCOH) are dominant cost factors. While leveraging produced water could reduce freshwater consumption and enhance hydrogen production sustainability, further research is required to optimize treatment processes and assess economic viability under real-world conditions. This study emphasizes the need for integrated approaches combining water treatment, renewable energy, and policy incentives to advance a circular economy model for hydrogen production. Full article

The global scarcity of freshwater, particularly in arid regions, has intensified interest in sustainable desalination technologies. Among these, solar still (SS) systems stand out for their low operational costs and environmental compatibility. This review presents a comprehensive analysis of recent advancements in solar still technologies, with a particular emphasis on innovative materials, thermal management strategies, and hybrid systems aimed at improving water productivity and cost-efficiency. Key technologies such as phase change materials (PCMs) and thermoelectric modules (TEMs) are examined in detail, showing up to 140% and 6.7-fold improvements in productivity, respectively, in select configurations. The review also synthesizes results from various studies using a comparative lens, highlighting combinations such as double-glazed glass with fins and TEMs (5.7-fold increase) and CuO–water nanofluids coupled with TEMs and vibration (5.3-fold increase). Cost analyses reveal that some configurations achieve water production at as low as 0.011 USD/L under real-world conditions in Rajshahi, Bangladesh, using an integrated system with an external condenser and solar collector. Unlike general reviews, this work systematically compares performance metrics, cost-effectiveness, and design innovations across multiple studies to provide a clearer perspective on technology viability. Future directions suggest the integration of hybrid approaches using PCM, TEM, nanotechnology, and advanced geometries to overcome current limitations and further advance solar desalination efficiency. Full article

Solar desalination is widely regarded as an effective way to solve freshwater scarcity. However, the balance between the costs of micro-nanostructures, thermal regulation, and the durability of interface evaporators must all be considered. In this study, a super-hydrophobic copper foam with hierarchical micro-nanostructures exhibited temperatures greater than 66 °C under solar illumination of 1 kW·m⁻². Significantly, the modified copper foam acting as a solar interface evaporator had a water harvesting efficiency of 1.76 kg·m⁻²·h⁻¹, resulting from its good photothermal conversion and porous skeleton. Further, the anti-deicing, self-cleaning, and anti-abrasion tests were carried out to demonstrate its durability. The whole fabrication of the as-prepared CF was only involved in mechanical extrusion and spray-coating, which is suitable for large-scale production. This work endows the interface evaporator with super-hydrophobicity, photo-thermal conversion, anti-icing, and mechanical stability, all of which are highly demanded in multi-scenario solar desalination. Full article

The industrial sector accounts for approximately 65% of global energy consumption, with projections indicating a steady annual increase of 1.2% in energy demand. In the context of growing concerns about climate change and the need for sustainable energy solutions, solar thermal energy has emerged as a promising technology for reducing reliance on fossil fuels. With its ability to provide high-efficiency heat for industrial processes at temperatures ranging from 150 °C to over 500 °C, solar thermal power generation offers significant potential for decarbonizing energy-intensive industries. This review provides a comprehensive analysis of various solar thermal technologies, including parabolic troughs, solar towers, and linear Fresnel reflectors, comparing their effectiveness across different industrial applications such as process heating, desalination, and combined heat and power (CHP) systems. For instance, parabolic trough systems have demonstrated optimal performance in high-temperature applications, achieving efficiency levels up to 80% for steam generation, while solar towers are particularly suitable for large-scale, high-temperature operations, reaching temperatures above 1000 °C. The paper also evaluates the economic feasibility of these technologies, showing that solar thermal systems can achieve a levelized cost of energy (LCOE) of USD 60–100 per MWh, making them competitive with conventional energy sources in many regions. However, challenges such as high initial investment, intermittency of solar resource, and integration into existing industrial infrastructure remain significant barriers. This review not only discusses the technical principles and economic aspects of solar thermal power generation but also outlines specific recommendations for enhancing the scalability and industrial applicability of these technologies in the near future. Full article

Solar energy is important for the future as it provides a clean, renewable source of electricity that can help combat climate change by reducing reliance on fossil fuels via implementing various solar-based energy systems. In this study, a unique configuration for a parabolic-trough-based solar system is presented that allows energy storage for periods of time with insufficient solar radiation. This model, based on extensive analysis in MATLAB utilizing real-time weather data, demonstrates promising results with strong practical applicability. An organic Rankine cycle with a regenerative configuration is applied to produce electricity, which is further utilized for hydrogen generation. A proton exchange membrane electrolysis (PEME) unit converts electricity to hydrogen, a clean and versatile energy carrier since the electricity is solar based. To harness the maximum value from this system, additional energy during peak times is used to produce clean water utilizing a reverse osmosis (RO) desalination unit. The system’s performance is examined by conducting a case study for the city of Antalya, Turkey, to attest to the unit’s credibility and performance. This system is also optimized via the Grey Wolf multi-objective algorithm from energy, exergy, and techno-economic perspectives. For the optimization scenario performed, the energy and exergy efficiencies of the system and the levelized cost of products are found to be approximately 26.5%, 28.5%, and 0.106 $/kWh, respectively. Full article

This paper examines the application of artificial intelligence (AI) in desalination. The study explored AI techniques, including machine learning, neural networks, and genetic algorithms, to enhance system efficiency and reduce energy costs. Case studies assessed the impact of AI on desalination systems, including those powered by renewable energy sources. Key findings revealed that AI-driven systems improved water quality, reduced energy consumption by up to 50%, and enabled predictive maintenance, minimizing downtime. Challenges in integrating AI with renewable energy-powered water treatment and desalination systems were addressed by analyzing hybrid setups combining solar, wind, and battery storage with reverse osmosis (RO) and multi-stage flash (MSF) technologies. These systems demonstrated critical improvements in energy efficiency, making desalination more viable for arid and remote areas. Fault detection algorithms and predictive maintenance emerged as pivotal AI applications, significantly reducing maintenance costs and enhancing reliability. This study was concluded by identifying challenges such as the intermittent nature of renewable energy and the complexities of designing scalable hybrid AI systems. Future research should further refine AI techniques, advancing sustainable and energy-efficient water treatment solutions. Full article

This study evaluates the techno-economic feasibility of solar-based green hydrogen potential for off-grid and utility-scale systems in Niger. The geospatial approach is first employed to identify the area available for green hydrogen production based on environmental and socio-technical constraints. Second, we evaluate the potential of green hydrogen production using a geographic information system (GIS) tool, followed by an economic analysis of the levelized cost of hydrogen (LCOH) for alkaline and proton exchange membrane (PEM) water electrolyzers using fresh and desalinated water. The results show that the electricity generation potential is 311,617 TWh/year and 353,166 TWh/year for off-grid and utility-scale systems. The hydrogen potential using PEM (alkaline) water electrolyzers is calculated to be 5932 Mt/year and 6723 Mt/year (5694 Mt/year and 6454 Mt/year) for off-grid and utility-scale systems, respectively. The LCOH production potential decreases for PEM and alkaline water electrolyzers by 2030, ranging between 4.72–5.99 EUR/kgH₂ and 5.05–6.37 EUR/kgH₂ for off-grid and 4.09–5.21 EUR/kgH₂ and 4.22–5.4 EUR/kgH₂ for utility-scale systems. Full article

This paper reviews recent advancements in integrated thermoelectric power generation and water desalination technologies, driven by the increasing global demand for electricity and freshwater. The growing population and reliance on fossil fuels for electricity generation pose challenges related to environmental pollution and resource depletion, necessitating the exploration of alternative energy sources and desalination techniques. While thermoelectric generators are capable of converting low-temperature thermal energy into electricity and desalination processes that can utilize low-temperature thermal energy, their effective integration remains largely unexplored. Currently available hybrid power and water systems, such as those combining conventional heat engine cycles (e.g., the Rankine and Kalina cycles) with reverse osmosis, multi-effect distillation, and humidification–dehumidification, are limited in effectively utilizing low-grade thermal energy for simultaneous power generation and desalination, while solid-state heat-to-work conversion technology, such as thermoelectric generators, have low heat-to-work conversion efficiency. This paper identifies a key research gap in the limited effective integration of thermoelectric generators and desalination, despite their complementary characteristics. The study highlights the potential of hybrid systems, which leverage low-grade thermal energy for simultaneous power generation and desalination. The review also explores emerging material innovations in high figure of merit thermoelectric materials and advanced MD membranes, which could significantly enhance system performance. Furthermore, hybrid power–desalination systems incorporating thermoelectric generators with concentrated photovoltaic cells, solar thermal collectors, geothermal energy, and organic Rankine cycles (ORCs) are examined to highlight their potential for sustainable energy and water production. The findings underscore the importance of optimizing material properties, system configurations, and operating conditions to maximize efficiency and output while reducing economic and environmental costs. Full article

This study addresses the increasing demand for sustainable water production by investigating the integration of solar energy into a multi-effect desalination (MED) plant located in Zuara, Libya. It is acknowledged that regions with high water demand frequently experience elevated levels of solar radiation; thus, this approach seeks to reduce dependence on fossil fuels and mitigate harmful emissions. Three operational modes were analyzed and compared: (1) daytime-only solar operation, (2) hybrid solar–boiler operation, and (3) solar operation with thermal energy storage. A validated mathematical model, informed by real empirical data, was used to assess energy and exergy efficiencies as well as production costs per cubic meter of desalinated water. The results indicate a trade-off between cost-effectiveness and environmental impact. The fossil fuel-based mode demonstrated the highest energy efficiency but also produced the greatest pollution. Conversely, the solar-only daytime mode, while free of emissions, was the costliest (USD 1.4/m³) due to its limited operational hours. The hybrid mode offered a compromise, presenting lower costs (USD 0.79/m³) and moderate land use, yet it still relied on fossil fuels. The thermal storage mode facilitated continuous, clean desalination at a higher cost (USD 0.97/m³) and required the largest solar field area. This study demonstrates the potential of solar-powered MED plants for sustainable water production, particularly in regions characterized by abundant sunlight and water scarcity. Furthermore, this research provides a comprehensive framework for selecting the optimal operational mode based on specific priorities, such as minimizing environmental impact, reducing costs, or maximizing operational flexibility. Full article

Water scarcity is an escalating global issue which also affects Poland. One of the solutions to this challenge is seawater desalination, particularly using solar stills (SSs). SSs offer a sustainable, low-cost solution for desalination, but their efficiency depends mainly on local solar conditions. Therefore, this study presents long-term experimental results for a single-basin, single-slope SS’s performance in Krakow, Poland, from May to September 2022. The findings show that the SS effectively removed over 98% of total dissolved solids, with a productivity ranging from 1084 to 5014 mL/(m²·day) and water temperatures reaching up to 80.4 °C. These results highlight the feasibility of solar-powered desalination in Poland and contribute valuable data for future optimization. Full article