Search Results (21)

Thermoplasmonic heat generation by silver (Ag) nanoparticles can harness visible light to efficiently produce localized heating. Flame spray pyrolysis (FSP) is a powerful one-step synthesis technology for fabricating plasmonic Ag-based nanostructures. In the present study, we employed FSP to engineer core@shell Ag@SiO₂ nanoparticles coated with an ultrathin (1–2 nm) silica (SiO₂) nanolayer in a single step in tandem with their deposition as films onto solid substrates. Accordingly, we engineered a library of Ag@SiO₂ nanofilms with precisely controlled thicknesses in the range of 1–23 μm. A systematic study of the thermoplasmonic heat-generation efficiency (ΔT) of the films under visible-light irradiation (LED, λ = 405 nm) revealed that the films’ compactness and thickness are key parameters governing the heat-generation efficiency and thermal response rate. Moreover, we show that the substrate type can also play a key role; Ag@SiO₂ films on glass-fiber filters (PGFFs) enabled faster temperature increase (dT/dt) and a higher maximum temperature gain (ΔT_max) compared with Ag@SiO₂ films on glass substrates (PGSs). The photothermal conversion efficiencies were approximately 60%, with the highest efficiency (η = 65%) observed in the thinner impinged film. This study demonstrates that FSP-derived Ag@SiO₂ nanofilms provide a versatile and scalable platform for thermoplasmonic heat generation applications with significant industrial potential. Full article

The properties of two hybrid nanoarchaeosomes (hybrid nanoARCs) made of archaeolipids extracted from the halophilic archaea Halorubrum tebenquichense and combining the properties of archaeolipid bilayers with metallic nanoparticles are explored here. BS-nanoARC, consisting of a nanoARC loaded with yerba mate (Ilex paraguariensis) extract (YME)-biogenic silver nanoparticles (BSs), and [BS + BS-nanoARC], consistent of a BS-nanoARC core covered by an outer shell of BSs, were structurally characterized and their therapeutic activities screened. By employing 109 ± 5 µg gallic acid equivalents (GAEs) and 73.4 µg chlorogenic acid/ YME mg as a silver reductive agent, spherical, heterogeneously sized (~80 nm diameter), −27 mV ζ potential, 90% Ag⁰ and λ_max 420 nm BSs were obtained. We further prepared ~100–200 nm diameter, −57 mV ζ potential BS-nanoARC and ~300 nm diameter, −37 mV ζ potential [BS + BS-nanoARCs]. Freshly prepared and nebulized BS-nanoARCs reduced the release of TNF-α, IL-6 and IL-8 by LPS-irritated THP-1-macrophages and were highly anti-planktonic against S. aureus (MIC₉₀: 13 ± 0.8 µg Ag/mL). While the nanoARCs and BS-nanoARCs were innocuous, freshly prepared [BS + BS-nanoARCs] magnified the cytotoxicity of BSs (IC₅₀ 12 µg Ag/mL vs. IC₅₀ ~36 µg Ag/mL) on A549 cells. Such cytotoxicity remained after 30 days in the dark at 4 °C, while that of BSs was lost. Freshly prepared BSs also lost activity upon nebulization, whereas freshly prepared [BS + BS-nanoARCs] did not. However, the cytotoxicity of the [BS + BS-nanoARCs] was also lost when nebulized after 30 days of storage. Despite the harmful effects of storage and mechanical stress on the structure of the more active [BS + BS-nanoARCs], hybrid nanoARCs are promising examples of nanomedicines combining the properties of archaeolipids with antimicrobial silver nanoparticles and anti-inflammatory polyphenols that could complement oncologic therapies, reducing the usage of classical antitumoral agents, corticosteroids, and, importantly, of antibiotics, as well as their waste. Full article

We reported the gold/silver core-shell nanoparticles (Au_core@Ag_shell NPs) functionalized with β-cyclodextrin (β-CD) as versatile nano-agents demonstrated for human urine-based biosensing of cysteamine and catalytic conversion from nitrobenzene (NB) to aniline. First, the hybrid bimetallic nanoparticles, i.e., β-CD-Au_core@Ag_shell NPs, constituted a colorimetric sensing platform based on localized surface plasmons, enabling cysteamine (Cyst) to be detected in a remarkably rapid manner, i.e., within 2 min, which was greatly shortened in comparison with that of our previous report. This was due largely to use of β-CD being effectively replaceable by Cyst. The detection of Cyst was demonstrated using human urine specimens in the linear range of 25–750 nM with a limit of detection of 1.83 nM. Excellent specificity in detecting Cyst was also demonstrated against potential interfering molecules. Meanwhile, the β-CD-Au_core@Ag_shell NPs were demonstrated as nanocatalysts for converting NB to aniline with efficiency enhanced by more than three-fold over the pure gold nanoparticles previously reported, due to the dual functions of the structural core-shell. The demonstrated versatile features of the hybrid nanoparticles can find applications in human urine-based biosensors for Cyst detection, and in the screening of Cyst-containing drugs, while detoxicating NB for ecological protection in aqueous media. Full article

Background: Nonalcoholic fatty liver disease (NAFLD) poses a risk for numerous metabolic diseases. To date, the U.S. Food and Drug Administration has not yet approved any medications for the treatment of NAFLD, for which developing therapeutic drugs is urgent. Dihydromyricetin (DMY), the most abundant flavonoid in vine tea, has been shown to be hepatoprotective. Its application was limited by low bioavailability in vivo; Methods: In order to improve the bioavailability of DMY and achieve liver-targeted delivery, we designed a DMY-loaded stiff-soft hybrid biomimetic nano drug delivery system (DMY-hNE). The in vivo absorption, distribution, pharmacokinetic profiles, and anti-NAFLD efficacy of DMY-hNE were studied; Results: DMY-hNE was composed of a stiff core and soft shell, which led to enhanced uptake by gastrointestinal epithelial cells and increased penetration of the mucus barrier, thus improving the in vivo absorption, plasma DMY concentration, and liver distribution versus free DMY. In an early NAFLD mouse model, DMY-hNE effectively ameliorated fatty lesions accompanied with reduced lipid levels and liver tissue inflammation; Conclusions: These findings suggested that DMY-hNE is a promising platform for liver drug delivery and treatment of hepatopathy. Full article

Dressings with multiple functional performances (such as hemostasis, promoting regeneration, analgesia, and anti-inflammatory effects) are highly desired in orthopedic surgery. Herein, several new kinds of medicated nanofibers loaded with several active ingredients for providing multiple functions were prepared using the modified coaxial electrospinning processes. With an electrospinnable solution composed of polycaprolactone and fenoprofen as the core working fluid, several different types of unspinnable fluids (including pure solvent, nanosuspension containing tranexamic acid and hydroxyapatite, and dilute polymeric solution comprising tranexamic acid, hydroxyapatite, and polyvinylpyrrolidone) were explored to implement the modified coaxial processes for creating the multifunctional nanofibers. Their morphologies and inner structures were assessed through scanning and transmission electron microscopes, which all showed a linear format without the discerned beads or spindles and a diameter smaller than 1.0 μm, and some of them had incomplete core–shell nanostructures, represented by the symbol @. Additionally, strange details about the sheaths’ topographies were observed, which included cracks, adhesions, and embedded nanoparticles. XRD and FTIR verified that the drugs tranexamic acid and fenoprofen presented in the nanofibers in an amorphous state, which resulted from the fine compatibility among the involved components. All the prepared samples were demonstrated to have a fine hydrophilic property and exhibited a lower water contact angle smaller than 40° in 300 ms. In vitro dissolution tests indicated that fenoprofen was released in a sustained manner over 6 h through a typical Fickian diffusion mechanism. Hemostatic tests verified that the intentional distribution of tranexamic acid on the shell sections was able to endow a rapid hemostatic effect within 60 s. Full article

Hybrid latex particles combine the unique properties of inorganic nano/micro particles with the inherent properties of polymers, exhibiting tremendous potential for a variety of applications. Recent years have witnessed an increased interest in the design and preparation of hybrid latex particles with well-defined size, structure and morphology. Due to its simplicity, versatility and environmental friendliness, the in situ (Pickering) emulsion polymerization has been demonstrated to be a powerful approach for the large-scale preparation of hybrid latex particles. In this review, the strategies and applications of in situ (Pickering) emulsion polymerization for the preparation of hybrid latex particles are systematically summarized. A particular focus is placed on the strategies for the preparation of hybrid latex particles with enhanced properties and well-defined core–shell, yolk–shell, multinuclear, raspberry-like, dumbbell-shaped, multipod-like or armored morphologies. We hope that the considerable advances, examples and principles presented in this review can motivate future contributions to provide a deeper understanding of current preparation technologies, develop new processes, and enable further exploitation of hybrid latex particles with outstanding characteristics and properties. Full article

As a promising nanofiller, layered double hydroxides (LDHs) can advance the fire safety of epoxy resin (EP), but so far, due to the problems of dispersion and low efficiency, it has still been a challenge to incorporate the flame retardancy and mechanical properties of EP nanocomposites effectively under the circumstance of a low additive amount. In this work, we take LDHs as the template, via the adsorption of a catechol group and the condensation polymerization between catechol groups and phenylboric acid groups, to prepare a core–shell structured nanoparticle LDH@BP, which contains rich flame-retardant elements. EP/LDH@BP nanocomposites were prepared by introducing LDH@BP into EP. The experimental results indicate that, compared with the original LDH, LDH@BP disperses uniformly in the EP matrix, and the flame retardancy and mechanical properties of EP/LDH@BP are significantly improved. At a relatively low content (5 wt%), EP/LDH@BP reached the rating of V-0 in the UL-94 test, LOI was increased to 29.1%, and peak heat release rate (PHRR) was reduced by 35.9% in cone calorimeter tests, which effectively inhibited the release of heat and toxic smoke during the combustion process of EP. Simultaneously, the mechanical properties of EP/LDH@BP have been improved satisfactorily. The above results derive from the reasonable architectural design of organic–inorganic nano-hybrid flame retardants and provide a novel method for the construction of efficient and balanced EP nanocomposite system with LDHs. Full article

A MIMI (metal–insulator-metal–insulator) nanoparticle was conceived and synthesized. It consists of a core of gold nanoparticles of different shapes, covered by a silica shell in turn covered by a layer of gold and finally by another silica shell. This hybrid nano-matryoshka, completely dispersed in water, was characterized by UV–Vis and TEM spectroscopy, comparing the architecture and photophysical properties of each synthetic step. Through a numerical simulation, it was possible to study in depth the absorption and extinction cross sections, determining the role of the various layers. This is an example of architecture used in the construction of metamaterials, the first in the form of a water-dispersed nanoparticles. Full article

We demonstrated that the hybrid core–shell nanostructure of Fe₃O₄ (core) and gold (shell) could be a good substrate candidate both for metal-enhanced fluorescence (MEF) and surface-enhanced Raman spectroscopy (SERS). The magnetic properties of the core material could provide functionalities such as the magnetically induced aggregation/distribution of nanostructures to increase the hot-spot density, while the nano-thickness gold shell allows for the plasmonic enhancement of both fluorescence and SERS. The gold-capped magnetic (Fe₃O₄) nanoparticles (GMPs) were facilely synthesized using a newly developed chemical method. The relative molar ratio of the constituent materials of the core–shell composite was optimized for tuning the plasmonic resonance wavelengths for MEF and SERS. We employed GMP-based MEF to detect alpha-fetoprotein (AFP), with concentrations ranging from 0.05 to 1000 ng/mL, and obtained a limit of detection (LOD) as low as 3.8 × 10⁻⁴ ng/mL. The signal enhancement factor (EF) in the GMP-based MEF was 1.5 at maximum. In addition, the GMPs were used in SERS to detect rhodamine B (RhB). Its LOD was 3.5 × 10⁻¹² M, and the EF was estimated to be about 2 × 10⁸. The hybrid core–shell nanoparticles could find potential applications in diagnostic assays based on MEF and SERS in various fields such as food verification, environmental testing/monitoring, and disease diagnosis. Full article

Despite many attempts, trials, and treatment procedures, pancreatic ductal adenocarcinoma (PDAC) still ranks among the most deadly and treatment-resistant types of cancer. Hence, there is still an urgent need to develop new molecules, drugs, and therapeutic methods against PDAC. Naturally derived compounds, such as pentacyclic terpenoids, have gained attention because of their high cytotoxic activity toward pancreatic cancer cells. Ursolic acid (UA), as an example, possesses a wide anticancer activity spectrum and can potentially be a good candidate for anti-PDAC therapy. However, due to its minimal water solubility, it is necessary to prepare an optimal nano-sized vehicle to overcome the low bioavailability issue. Poly(lactic-co-glycolic acid) (PLGA) polymeric nanocarriers seem to be an essential tool for ursolic acid delivery and can overcome the lack of biological activity observed after being incorporated within liposomes. PLGA modification, with the addition of PEGylated phospholipids forming the lipid shell around the polymeric core, can provide additional beneficial properties to the designed nanocarrier. We prepared UA-loaded hybrid PLGA/lipid nanoparticles using a nanoprecipitation method and subsequently performed an MTT cytotoxicity assay for AsPC-1 and BxPC-3 cells and determined the hemolytic effect on human erythrocytes with transmission electron microscopic (TEM) visualization of the nanoparticles and their cellular uptake. Hybrid UA-loaded lipid nanoparticles were also examined in terms of their stability, coating dynamics, and ursolic acid loading. We established innovative and repeatable preparation procedures for novel hybrid nanoparticles and obtained biologically active nanocarriers for ursolic acid with an IC50 below 20 µM, with an appropriate size for intravenous dosage (around 150 nm), high homogeneity of the sample (below 0.2), satisfactory encapsulation efficiency (up to 70%) and excellent stability. The new type of hybrid UA-PLGA nanoparticles represents a further step in the development of potentially effective PDAC therapies based on novel, biologically active, and promising triterpenoids. Full article

Polyion complex (PIC) micelles have gained an increasing interest, mainly as promising nano-vehicles for the delivery of various hydrophilic charged (macro)molecules such as DNA or drugs to the body. The aim of the present study is to construct novel functional PIC micelles bearing cell targeting ligands on the surface and to evaluate the possibility of a hydrophobic drug encapsulation. Initially, a pair of functional oppositely charged peptide-based hybrid diblock copolymers were synthesized and characterized. The copolymers spontaneously co-assembled in water into nanosized PIC micelles comprising a core of a polyelectrolyte complex between poly(L-aspartic acid) and poly(L-lysine) and a biocompatible mixed shell of disaccharide-modified poly(ethylene glycol) and poly(2-hydroxyethyl methacrylate). Depending on the molar ratio between the oppositely charged groups, PIC micelles varying in surface charge were obtained and loaded with the natural hydrophobic drug curcumin. PIC micelles’ drug loading efficiency, in vitro drug release profiles and antioxidant activity were evaluated. The preliminary results indicate that PIC micelles can be successfully used as carriers of hydrophobic drugs, thus expanding their potential application in nanomedicine. Full article

In our review, we have presented a summary of the research accomplishments of nanostructured multimetal-based electrocatalysts synthesized by modified polyol methods, especially the special case of Pt-based nanoparticles associated with increasing potential applications for batteries, capacitors, and fuel cells. To address the problems raised in serious environmental pollution, disease, health, and energy shortages, we discuss and present an improved polyol process used to synthesize nanoparticles from Pt metal to Pt-based bimetal, and Pt-based multimetal catalysts in the various forms of alloy and shell core nanostructures by practical experience, experimental skills, and the evidences from the designed polyol processes. In their prospects, there are the micro/nanostructured variants of hybrid Pt/nanomaterials, typically such as Pt/ABO₃-type perovskite, Pt/AB₂O₄-type ferrite, Pt/CoFe₂O₄, Pt/oxide, or Pt/ceramic by modified polyol processes for the development of electrocatalysis and energy technology. In the future, we suggest that both the polyol and the sol-gel processes of diversity and originality, and with the use of various kinds of water, alcohols, polyols, other solvents, reducing agents, long-term capping and stabilizing agents, and structure- and property-controlling agents, are very effectively used in the controlled synthesis of micro/nanoparticles and micro/nanomaterials. It is understood that at the levels of controlling and modifying molecules, ions, atoms, and nano/microscales, the polyol or sol-gel processes, and their technologies are effectively combined in bottom-up and top-down approaches, as are the simplest synthetic methods of physics, chemistry, and biology from the most common aqueous solutions as well as possible experimental conditions. Full article

This work is devoted to the study of magnetic Fe₃O₄ nanoparticles doubly coated with carbon. First, Fe₃O₄@C nanoparticles were synthesized by thermal decomposition. Then these synthesized nanoparticles, 20–30 nm in size were processed in a solution of glucose at 200 °C during 12 h, which led to an unexpected phenomenon—the nanoparticles self-assembled into large conglomerates of a regular shape of about 300 nm in size. The morphology and features of the magnetic properties of the obtained hybrid nanoparticles were characterized by transmission electron microscopy, differential thermo-gravimetric analysis, vibrating sample magnetometer, magnetic circular dichroism and Mössbauer spectroscopy. It was shown that the magnetic core of Fe₃O₄@C nanoparticles was nano-crystalline, corresponding to the Fe₃O₄ phase. The Fe₃O₄@C@C nanoparticles presumably contain Fe₃O₄ phase (80%) with admixture of maghemite (20%), the thickness of the carbon shell in the first case was of about 2–4 nm. The formation of very large nanoparticle conglomerates with a linear size up to 300 nm and of the same regular shape is a remarkable peculiarity of the Fe₃O₄@C@C nanoparticles. Adsorption of organic dyes from water by the studied nanoparticles was also studied. The best candidates for the removal of dyes were Fe₃O₄@C@C nanoparticles. The kinetic data showed that the adsorption processes were associated with the pseudo-second order mechanism for cationic dye methylene blue (MB) and anionic dye Congo red (CR). The equilibrium data were more consistent with the Langmuir isotherm and were perfectly described by the Langmuir–Freundlich model. Full article

We report that Fe₃O₄@Au core-shell nanoparticles (NPs) serve as a multifunctional molecule delivery platform. This platform is also suitable for sensing the doxorubicin (DOX) through DNA hybridization, and the amount of carried DOX molecules was determined by size-dependent Fe₃O₄@Au NPs. The limits of detection (LODs) for DOX was found to be 1.839 nM. In our approach, an Au nano-shell coating was coupled with a specially designed DNA sequence using thiol bonding. By means of a high-frequency magnetic field (HFMF), a high release percentage of such a molecule could be efficiently achieved in a relatively short period of time. Furthermore, the thickness increase of the Au nano-shell affords Fe₃O₄@Au NPs with a larger surface area and a smaller temperature increment due to shielding effects from magnetic field. The change of magnetic property may enable the developed Fe₃O₄@Au-dsDNA/DOX NPs to be used as future nanocarrier material. More importantly, the core-shell NP structures were demonstrated to act as a controllable and efficient factor for molecule delivery. Full article

Hybrid nanoparticles composed of an efficient nonlinear optical core and a gold shell can enhance and tune the nonlinear optical emission thanks to the plasmonic effect. However the influence of an incomplete gold shell, i.e., isolated gold nano-islands, is still not well studied. Here LiNbO₃ (LN) core nanoparticles of 45 nm were coated with various densities of gold nano-seeds (AuSeeds). As both LN and AuSeeds bear negative surface charge, a positively-charged polymer was first coated onto LN. The number of polymer chains per LN was evaluated at 1210 by XPS and confirmed by fluorescence titration. Then, the surface coverage percentage of AuSeeds onto LN was estimated to a maximum of 30% using ICP-AES. The addition of AuSeeds was also accompanied with surface charge reversal, the negative charge increasing with the higher amount of AuSeeds. Finally, the first hyperpolarizability decreased with the increase of AuSeeds density while depolarization values for Au-seeded LN were close to the one of bare LN, showing a predominance of the second harmonic volumic contribution. Full article