Search Results (590)

Background: This meta-analysis aimed to evaluate the dentoalveolar changes of miniscrew-assisted rapid palatal expansion (MARPE) compared with conventional rapid palatal expansion (CRPE) in growing patients (≤16 years). Methods: A systematic and comprehensive literature search was carried out independently by two reviewers using both MeSH terms and free-text keywords across PubMed, the Cochrane Library, and Embase, with studies published through February 2025 included. The risk of bias was assessed using the Cochrane ROB 2.0 tool. The GRADE system was employed to determine evidence quality. Results: Of the 462 initially screened articles, 6 met the inclusion criteria and were selected for quantitative synthesis. Most studies had a low risk of bias with some concerns in reporting. The pooled standardized mean difference (SMD) for tooth inclination changes in CRPE compared with MARPE was 0.98 (95% confidence interval (CI), 0.54 to 1.42; p < 0.01). The test for overall effect was significant (p < 0.01), but no significant differences were found between the subgroups. The pooled SMD for buccal bone thickness changes in CRPE compared with MARPE was 0.69 (95% CI, 0.37 to 1.00; p < 0.01). The test for overall effect was significant (p < 0.01), and there were substantial differences between the subgroups. The supporting evidence ranged in certainty from moderate to low. Conclusions: MARPE was more effective than CRPE in minimizing the buccal tipping and buccal bone loss of the maxillary first premolars and first molars. However, to further confirm these outcomes and guide evidence-based clinical practice, well-designed randomized controlled trials with long-term follow-up are necessary. Full article

Objectives: Facial soft tissue imaging is crucial in orthodontic treatment planning, and the structured light scanning technology found in the latest iPhone models constitutes a promising method. Currently, studies which evaluate the accuracy of smartphone-based three-dimensional (3D) facial scanners are scarce. This study compares smartphone scans with cone-beam computed tomography (CBCT) images. Materials and Methods: Three-dimensional images of 23 screened patients were captured with the camera of an iPhone 13 Pro Max and processed with the Scandy Pro application; CBCT scans were also taken as a standard of care. After establishing unique image pairs of the same patient, linear and angular measurements were compared between the images to assess the scanner’s two-dimensional trueness. Following the co-registration of the virtual models, a heat map was generated, and root mean square (RMS) deviations were calculated for quantitative assessment of 3D trueness. Precision was determined by comparing consecutive 3D facial scans of five participants, while intraobserver reliability was assessed by repeating measurements on five subjects after a two-week interval. Results: This study found no significant difference in soft tissue measurements between smartphone and CBCT images (p > 0.05). The mean absolute difference was 1.43 mm for the linear and 3.16° for the angular measurements. The mean RMS value was 1.47 mm. Intraobserver reliability and scanner precision were assessed, and the Intraclass Correlation Coefficients were found to be excellent. Conclusions: Smartphone facial scanners offer an accurate and reliable alternative to stereophotogrammetry systems, though clinicians should exercise caution when examining the lateral sections of those images due to inherent inaccuracies. Full article

Background and Clinical Significance: The retreatment of failed dental implants remains a challenging clinical scenario, particularly when complicated by peri-implantitis and as sociated bone loss. Successful management requires a comprehensive and predictable approach that addresses both hard and soft tissue deficiencies. Case Presentation: This case report illustrates a fully digital, prosthetically driven workflow for the rehabilitation of a posterior mandibular site following implant failure. A 44-year-old female patient underwent removal of a failing implant and adjacent tooth due to advanced peri-implantitis and periodontitis. After healing, a digital workflow—including intraoral scanning, cone-beam computed tomography (CBCT), and virtual planning—was employed to design and fabricate a customized CAD/CAM titanium mesh for vertical guided bone regeneration. The grafting procedure utilized a composite mixture of autogenous bone and anorganic bovine bone (A-Oss). After nine months of healing, two implants with a hydrophilic surface (SOI) were placed using a fully guided surgical protocol (OneGuide system). Subsequent soft tissue grafting and final prosthetic rehabilitation with monolithic zirconia restorations resulted in stable functional and aesthetic outcomes. Conclusions: This case highlights how the integration of modern digital technologies with advanced regenerative procedures and innovative implant surfaces can enhance the predictability and long-term success of implant retreatment in compromised posterior sites. Full article

Background: Gorlin–Goltz syndrome (GGS), also known as basal cell nevus syndrome or nevoid basal cell carcinoma syndrome, is a rare genetic disorder caused by mutations in the PTCH1, PTCH2, or SUFU genes, leading to an increased risk of neoplasms. Craniofacial anomalies are among the most common features of GGS. This paper aimed to highlight the similarities and differences in clinical presentation across different ages and to emphasize the importance of including all family members in the diagnostic process. The diagnosis can often be initiated by a dentist through routine radiographic imaging. Case Presentation: We present a 17-year longitudinal follow-up of a male patient with recurrent multiple odontogenic keratocysts and other manifestations consistent with GGS. Nearly 20 years later, the patient’s mother presented with similar clinical features suggestive of GGS. Diagnostic imaging, including contrast-enhanced computed tomography (CT), cone-beam CT, magnetic resonance imaging, and orthopantomography, was performed, and the diagnosis was confirmed through genetic testing. Interdisciplinary management included age-appropriate surgical and dermatological treatments tailored to lesion severity. Conclusions: Given the frequent involvement of the stomatognathic system in GGS, dentists play a critical role in early detection and referral. Comprehensive family-based screening is essential for timely diagnosis, improved monitoring, and effective management of this multisystem disorder. Full article

Objective: Mandibular expansion remains controversial due to concerns about long-term stability and effectiveness. While maxillary expansion protocols are well established, investigations into mandibular expansion remain limited. This study evaluates the efficacy of the Clara Expander appliance for mandibular expansion in early mixed dentition, assessing skeletal and dental changes using cone-beam computed tomography (CBCT). Materials and Methods: This prospective longitudinal study was conducted in Valencia, Spain, with a population of healthy children aged 6–10 years presenting negative osseodental mandibular discrepancies. CBCT scans were performed before and after treatment to evaluate mandibular dimensional changes, with statistical analyses conducted and a significance threshold of p < 0.05. A total of seven subjects were included in this case series, allowing for a descriptive analysis of treatment outcomes within this specific clinical context. Results: CBCT analysis confirmed significant mandibular expansion following the Clara Expander protocol. Post-treatment findings showed statistically significant increases in dental parameters, including Tooth 6 (furcation, MD = −2.25; p = 0.015), Tooth E (furcation, cementoenamel junction, vestibular, lingual, all p < 0.001), Tooth D (all variables significant), and Tooth C (furcation, MD = −4.18; p = 0.002; cementoenamel junction, MD = −3.56; p = 0.015). Conclusions: The Clara Expander appliance effectively promotes skeletal and dental mandibular expansion, with minimal adverse effects. Its user-friendly, non-invasive design enhances patient compliance and outcomes, contributing valuable data to the field of mandibular expansion and informing future research and clinical applications. Full article

This retrospective study aimed to evaluate the prevalence, morphological types, and distribution patterns of palatoradicular grooves (PRGs) in maxillary anterior teeth using cone-beam computed tomography (CBCT) in a Turkish population. CBCT images of 1553 patients from the radiology archive of Ordu University Faculty of Dentistry (2021–2022) were reviewed. A total of 920 patients (4012 teeth) met the inclusion criteria. The presence, type, and localization of PRGs were assessed. Groove types were classified as Type 1, 2, 3A, or 3B; localization was recorded as mesial, distal, or midpalatal. Bilateral and unilateral occurrences were also analyzed. Statistical analysis involved chi-square tests, Tukey’s HSD, and Cohen’s kappa for intra-observer reliability. PRGs were detected in 23.6% of patients and 10.42% of teeth. Lateral incisors were most affected (87.56%). Type 1 grooves were most common (71.53%), with midpalatal localization being most frequent (54.07%). Bilateral grooves were significantly more prevalent than unilateral ones (p < 0.001). No significant association was found between groove type and tooth type or between gender and bilaterality. This study revealed a high prevalence of PRGs, especially in maxillary lateral incisors, with a significant tendency toward bilateral and midpalatal presentation. CBCT proved essential for detecting palatoradicular grooves, aiding diagnosis and treatment. Full article

(1) Background: This study aimed to evaluate the marginal and internal fit of ceramic crowns produced by various digital methods using microcomputed tomography (MCT) imaging. (2) Methods: The ceramic crown preparation was performed on typodont maxillary first premolar. The crown preparation was scanned with an intraoral scanner and a model scanner, and cone-beam computed tomography (CBCT) scans were performed with three different voxel sizes (0.075 mm, 0.1 mm, and 0.15 mm). The space between the crown and prepared teeth was measured at nine different points in both coronal and sagittal sections. Three different digital model acquisition techniques, namely, intraoral scanning, model scanning, and CBCT-based standard tessellation language (STL) reconstruction, were compared in terms of marginal and internal fit. (3) Results: Quantitative analyses revealed that model scanners exhibited the lowest marginal and internal gap values, indicating superior fit compared to intraoral scanners and CBCT-based models. The highest gap values were observed in the CBCT group with a voxel size of 0.15 mm. Overall, crowns obtained from model scanners demonstrated the highest success rates in both marginal and internal fit. (4) Conclusions: In conclusion, this study highlights the critical role of digital scanning accuracy in achieving clinically acceptable prosthetic fits and emphasizes the need for continued technological advancement. Full article

Background and Objectives: The extraction of mandibular third molars poses challenges due to their proximity to the mandibular canal and risk of inferior alveolar nerve (IAN) injury. Accurate preoperative evaluation is essential to minimize complications. This study assessed the three-dimensional positional relationship between the mandibular canal and lower third molars using cone-beam computed tomography (CBCT), aiming to identify anatomical positions associated with increased surgical risk. Materials and Methods: This retrospective study analyzed 253 CBCT scans of fully developed lower third molars. The mandibular canal position was classified as apical (Class I), buccal (Class II), lingual (Class III), or interradicular (Class IV). Contact was categorized as no contact, contact with a complete or defective white line, or canal penetration. In no-contact cases, the apex–canal distance was measured. Statistical analysis included descriptive and contingency analyses using the Chi-Square Likelihood Ratio test. Results: Class I was most common (70.8%) and presented the lowest risk, while Classes III and IV showed significantly higher frequencies of canal contact or penetration. Class II exhibited shorter distances even in no-contact cases, suggesting residual risk. Statistically significant associations were found between canal position and both contact type (p < 0.001) and apex–canal distance (p = 0.046). Conclusions: CBCT offers valuable insight into the anatomical relationship between third molars and the mandibular canal. High-risk positions—particularly lingual and interradicular—require careful assessment. Even in the absence of contact, close proximity may pose a risk and should inform surgical planning. Full article

Background. Digital dentistry continues to evolve, offering improved accuracy, efficiency, and patient experience across various prosthodontic procedures. Many previous reviews have focused on digital applications in prosthodontics. But the use of a fully digital workflow for full-arch implant-supported prostheses in edentulous patients remains an emerging and underexplored area in the literature. Objective. This article presents a comprehensive methodological review of the digital workflow in full-arch implant-supported rehabilitation. It follows a structured literature exploration and synthesizes relevant technological processes from patient assessment to prosthetic delivery. Methods. The relevant literature was retrieved from the PubMed database on 20 June 2024, to identify the most recent and relevant studies. A total of 22 articles met the eligibility criteria and were included in the review. The majority included case and technical reports. Results. The review illustrates the integration and application of digital tools in implant dentistry, including cone-beam computed tomography (CBCT) exposure, intraoral scanning, digital smile design, virtual patients, guided surgery, and digital scanning. The key findings demonstrate multiple advantages of a fully digital workflow, such as reduced treatment time and cost, increased patient satisfaction, and improved interdisciplinary communication. Conclusions. Despite these benefits, limitations persist due to the low level of evidence, technological challenges, and the lack of standardized protocols. Further randomized controlled trials and long-term clinical evaluations are essential to validate the effectiveness and feasibility of a fully digital workflow for full-arch implant-supported rehabilitation. Full article

Evaluating the implant site immediately after implant removal is crucial for assessing its condition and ensuring morphological stability. Immediate reconstruction at the time of implant removal has been proposed as a strategy to preserve alveolar ridge width. This study aims to evaluate whether immediate alveolar bone reconstruction at the time of implant removal provides comparable or superior dimensional stability of the alveolar ridge compared to staged reconstruction approaches. The null hypothesis of this study is that there is no significant difference in alveolar bone dimensions between immediate and staged reconstructions following implant removal. This retrospective study included seven participants, consisting of six males and one female. The participants were categorized into three groups based on the treatment approach following implant removal. In Group 1, no bone grafting was performed after implant removal. In Group 2, bone grafting was conducted following implant removal, with an adequate healing period before implant placement. In Group 3, bone grafting was performed simultaneously with implant removal. Cone-beam computed tomography (CBCT) imaging was conducted before implant removal (T0), after implant removal or bone grafting (T1), and after implant placement (T2). All removed implants were successfully replaced with new ones, regardless of bone grafting. In terms of alveolar ridge width at 1 mm below the crest, Group 1 exhibited the greatest reduction (ΔT1 − T0 = −5.1 ± 3.7 mm), while Group 2 showed a mild increase (+1.1 ± 2.6 mm), and Group 3 had a moderate decrease (−1.3 ± 1.0 mm). This suggests that delayed bone grafting can better preserve or enhance bone volume during healing. A reduction in buccal ridge height between T1 and T0 (ΔT1 − T0) was observed, particularly in Group 1. In contrast, an increase in buccal ridge height was most pronounced in Group 2. Although immediate reconstruction (Group 3) did not result in statistically significant gains, it achieved successful implant placement without complications and reduced the total treatment duration, which might be beneficial from a clinical efficiency and patient satisfaction standpoint. Therefore, staged bone grafting (Group 2) appears to offer greater dimensional stability, particularly in maintaining ridge height, whereas immediate reconstruction (Group 3) remains a clinically viable alternative for stable healing in select cases, especially when shorter treatment timelines are prioritized. Full article

Background: MRA is used in our center for monitoring post-treatment residual aneurysmal neck and stent patency. IV CBCT offers better spatial resolution and may provide significant advantages. Objective: This study investigates the image quality of IV CBCT compared to that of MRA for the follow-up of intracranial aneurysms. Materials and Methods: In this prospective cohort study, 97 patients (mean age: 63.1 ± 11.7; 75 women and 22 men) with 114 treated cerebral aneurysms were included from July 2023 to April 2024. All patients underwent IV CBCT and MRA on the same day. Two neurointerventional radiologists assessed image quality using a five-point Likert scale on two separate occasions six weeks apart. Diagnostic values were evaluated across six parameters. Intra-observer and inter-observer agreements were calculated. Subgroup analyses were performed. Results: Overall, IV CBCT and MRA are comparable in terms of their ability to assess parent vessel status and the degree of artifacts (p > 0.05) though MRA shows a slight advantage in evaluating residual aneurysmal neck (p = 0.05). For clipped aneurysms, IV CBCT is superior in assessing residual aneurysmal neck (OR = 16.0, p < 0.001) and parent vessel status (OR = 15.1, p < 0.001) with significantly fewer artifacts (OR > 100, p < 0.001). For aneurysms solely treated with stents, IV CBCT is superior in assessing residual aneurysmal neck (OR > 20, p = 0.002) and parent vessel status (OR > 20, p = 0.002) with significantly fewer artifacts (OR > 20, p = 0.002). IV CBCT outperforms MRA in evaluating stent struts and the vessel wall status of a stented segment when MRA is non-diagnostic. Conclusions: IV CBCT and MRA have their own strengths and roles in the follow-up of post-treatment intracranial aneurysms. Overall, IV CBCT is superior in terms of its assessment of intracranial aneurysms treated solely with stents or surgical clips. Full article

Partially guided implant surgery has emerged as a technique that enhances the precision of implant placement while maintaining surgical flexibility. This in vitro experimental study evaluated the influence of the milling cutter drill on the angular and linear deviations of implant placement in synthetic polyurethane bone models using a partially guided surgical protocol. Additionally, the effects of bone density and implant macrogeometry were assessed. A total of 120 Straumann^® implants (BL, BLT, and BLX) were placed in polyurethane blocks simulating four bone densities (D1–D4). Implant positions were virtually planned with coDiagnostiX^® (version 10.9) software and executed with or without the use of the milling cutter drill. Deviations between planned and final implant positions were measured at the neck and apex using the software’s “Treatment Evaluation” tool. The use of the milling cutter drill significantly reduced angular deviation (p = 0.007), while linear deviations showed no statistically significant differences. Bone density and implant macrogeometry did not significantly affect angular deviation but influenced linear and 3D deviations. Given that angular deviation may compromise prosthetic fit and biomechanical function, the observed reduction is of potential clinical relevance. These findings indicate that the milling cutter drill enhances angular accuracy in partially guided implant surgery and may improve outcomes in anatomically challenging cases. However, the results should be interpreted within the limitations of this in vitro model, including the absence of soft tissue simulation, intraoral constraints, and inter-operator variability. Full article

Background and Objectives: Evaluating jaw augmentation procedures usually necessitates pre- and postoperative tomographic imaging. Ethical considerations emphasize minimizing radiation exposure. Given that panoramic radiographs (PR, 2D) offer a lower radiation dose compared to cone-beam CT (CBCT, 3D), this study explores the feasibility of estimating tooth root volume from PR, potentially allowing safer clinical assessments with reduced radiation exposure. Materials and Methods: To develop a mathematical approximation method, the 2D tooth root surface in PR was defined as an elliptical model and a cuboid (3D). The true root volume (mm³) was gathered from CBCTs. The missing link for tooth root volume assessment in 2D radiographs is the depth of the root (vestibulo-oral dimension). It was hypothesized that the tooth root surface and its volume are related. A correlation factor “r” corresponding to the tooth roots’ depths was then calculated. Descriptive and inferential statistics were computed (p < 0.05). Results: The mathematical model was performed on 27 molars with an average volume of 472.83 mm³ (±130.25–CBCT). The factor “r” (obtained by dividing the true root volume from CBCT by the total root surface from PR) was computed as 8.04 (±1.90). Using “r” for the volume calculation in the cuboid model, an average volume of 472.37 (±152.92) for the 27 molars was computed. These volumes did not differ significantly. Conclusions: This study demonstrates that a mathematical model using elliptical projections from panoramic radiographs reliably estimates molar root volume, yielding comparable results to CBCT while reducing radiation exposure. Full article

Cone-beam computed tomography (CBCT) offers low radiation, cross-sectional imaging that is a suitable alternative to conventional fan-beam computed tomography (FBCT). The initial experience using in-clinic CBCT in the Rhinology outpatient clinic at Waikato Hospital, New Zealand, is described. The first 5 months of CBCT use for Rhinologic imaging was compared to FBCT use in the equivalent 5-month period one year prior. Data relating to 61 CBCTs and 115 FBCTs was analysed. We compared the time and number of hospital visits required for a confirmed treatment decision (CTD) to be made and the duration of the clinic appointment at which the scan was requested between the two groups. The CBCT group required significantly less time (171 vs. 316 days, p < 0.001) and fewer hospital visits (1.5 vs. 3.2 visits, p < 0.001) before a CTD was made, but a longer appointment duration (86 vs. 53 min, p < 0.001). The use of in-clinic CBCT in Rhinology was therefore associated with reduced time and fewer hospital visits before definitive management was decided, but longer clinic appointments were observed. Increased access to CT imaging may result in increased demand. Expertise is required to optimise the quality of imaging, and we recommend that a dedicated Radiographer be allocated. Full article

Background/Objectives: Among the paranasal sinuses, the maxillary antrum holds unique clinical relevance due to its proximity to the alveolar process of the maxilla, which houses the teeth. This study aimed to evaluate the position of the root apices of the maxillary canines and posterior teeth relative to the maxillary sinus floor in Romanian subjects. Methods: Data for the study were retrospectively obtained from cone-beam computed tomography (CBCT) scans. The evaluation considered the pattern of proximity to the sinus floor for each tooth type, comparisons of the sinus relationships of teeth within the same dental hemiarch, as well as those of homologous teeth, and variation in root-to-sinus distance in relation to sex and age. Nonparametric tests were used for statistical analysis, and multiple comparisons were performed using Bonferroni post hoc correction. Results: The study included 70 individuals aged 20 to 60 years. The distance to the sinus floor decreased progressively from the first premolar to the second molar, with median values of 3.68 mm (first premolar), 1.45 mm (second premolar), 0.50 mm (first molar), and 0.34 mm (second molar) (p < 0.01). Stronger correlations were observed between adjacent teeth than between non-adjacent ones. The distances to the sinus floor were greater on the right side compared to the left; however, these differences were not statistically significant (p > 0.05 for all teeth). Concordance between left and right dental hemiarches regarding the closest tooth to the sinus floor was found in 70% of cases (n = 49), most frequently involving the second molars (n = 38; 54.3%). On average, the distance from the sinus floor was smaller in males compared to females, with statistically significant differences observed only for the second molar. Increased age was associated with a greater distance to the sinus floor. Conclusions: Of all the teeth investigated, the second molar showed the highest combined prevalence of penetrating and tangential relationships with the maxillary sinus. At the dental hemiarch level, the second molar was most frequently the closest tooth to the sinus floor, and in the majority of cases, at least one posterior tooth was located within 0.3 mm. Accurate preoperative assessment of tooth position relative to the sinus floor is essential when performing non-surgical or surgical root canal therapy and extractions of maxillary molars and premolars. CBCT provides essential three-dimensional imaging that improves diagnostic precision and supports safer treatment planning for procedures involving the posterior maxilla. Full article