Search Results (9,037)

(1) Insulin-like growth factor-1 (IGF-1) is a neurotrophin with anti-inflammatory properties. Neuroinflammation and stress activate peripheral immune mechanisms, which may contribute to the development of depression and anxiety in sporadic Alzheimer’s disease (sAD). This study aims to evaluate whether intracerebroventricular (ICV) premedication with IGF-1 in a rat model of streptozotocin (STZ)-induced neuroinflammation can prevent the emergence of anhedonia and anxiety-like behavior by impacting the peripheral inflammatory responses. (2) Male Wistar rats were subjected to double ICVSTZ (total dose: 3 mg/kg) and ICVIGF-1 injections (total dose: 2 µg). We analyzed the level of anhedonia (sucrose preference), anxiety (elevated plus maze), peripheral inflammation (hematological and cytometric measurement of leukocyte populations, interleukin (IL)-6), and corticosterone concentration at 7 (very early stage, VES), 45 (early stage, ES), and 90 days after STZ injections (late stage, LS). (3) We found that ICVIGF-1 administration reduces behavioral symptoms: anhedonia (ES and LS) and anxiety (VES, ES), and peripheral inflammation: number of leukocytes, lymphocytes, T lymphocytes, monocytes, granulocytes, IL-6, and corticosterone concentration (LS) in the rat model of sAD. (4) The obtained results demonstrate beneficial effects of central IGF-1 administration on neuropsychiatric symptoms and peripheral immune system activation during disease progression in the rat model of sAD. Full article

Physical activity, particularly when practiced in natural settings, has well-established benefits for overall health, sleep, and body composition. These effects are especially important for postmenopausal women, although research specifically targeting this population remains limited. The study evaluated a 16-week multicomponent outdoor exercise program (cardiorespiratory, strength, balance, coordination, and flexibility training) in postmenopausal women, consisting of three 60 min sessions per week. Participants were non-randomly assigned to an experimental group (EG, n = 55) and a control group (CG, n = 20). Measurements were taken at baseline and after 16 weeks, including body composition, sleep (duration and quality), and connection with nature. No significant differences were observed between groups at baseline. After the intervention, the EG and CG presented significant differences (p ≤ 0.01) in the rates of change in body mass, fat mass (FM; −9.26% and −1.21%, respectively), and visceral fat level (VFL; −13.46 points and −3.80 points). These differences were also observed for the sleep fragmentation index (p ≤ 0.01), but not for connection with nature. A significant interaction effect (p < 0.01) of time × group was observed for %FM, VFL, and appendicular skeletal muscle mass. Exercise duration had an effect (p = 0.043) on participants’ personal and affective identification with nature, and the time × group × medication interaction significantly influenced sleep efficiency (p = 0.034). The exercise program proved effective in reducing total and central adiposity levels; however, it did not lead to improvements in sleep duration, sleep quality, or connection with nature. Full article

High-strength steel has high strength and low thermal conductivity, and its thin-walled parts are very susceptible to residual stress and deformation caused by cutting heat during the drilling process, which affects the machining accuracy and quality. High-strength steel thin-walled components are widely used in aerospace and other high-end sectors; however, systematic investigations into their temperature fields during drilling remain scarce, particularly regarding the evolution characteristics of the temperature field in thin-wall drilling and the quantitative relationship between drilling parameters and these temperature variations. This paper takes the thin-walled parts of AF1410 high-strength steel as the research object, designs a special fixture, and applies infrared thermography to measure the bottom surface temperature in the thin-walled drilling process in real time; this is carried out in order to study the characteristics of the temperature field during the thin-walled drilling process of high-strength steel, as well as the influence of the drilling dosage on the temperature field of the bottom surface. The experimental findings are as follows: in the process of thin-wall drilling of high-strength steel, the temperature field of the bottom surface of the workpiece shows an obvious temperature gradient distribution; before the formation of the drill cap, the highest temperature of the bottom surface of the workpiece is distributed in the central circular area corresponding to the extrusion of the transverse edge during the drilling process, and the highest temperature of the bottom surface can be approximated as the temperature of the extrusion friction zone between the top edge of the drill and the workpiece when the top edge of the drill bit drills to a position close to the bottom surface of the workpiece and increases with the increase in the drilling speed and the feed volume; during the process of drilling, the highest temperature of the bottom surface of the workpiece is approximated as the temperature of the top edge of the drill bit and the workpiece. The maximum temperature of the bottom surface of the workpiece in the drilling process increases nearly linearly with the drilling of the drill, and the slope of the maximum temperature increases nearly linearly with the increase in the drilling speed and feed, in which the influence of the feed on the slope of the maximum temperature increases is larger than that of the drilling speed. Full article

Type 10 17β-hydroxysteroid dehydrogenase (17β-HSD10) is the HSD17B10 gene product. It plays an appreciable part in the carcinogenesis and pathogenesis of neurodegeneration, such as Alzheimer’s disease and infantile neurodegeneration. This mitochondrial, homo-tetrameric protein is a central hub in various metabolic pathways, e.g., branched-chain amino acid degradation and neurosteroid metabolism. It can bind to other proteins carrying out diverse physiological functions, e.g., tRNA maturation. It has also previously been proposed to be an Aβ-binding alcohol dehydrogenase (ABAD) or endoplasmic reticulum-associated Aβ-binding protein (ERAB), although those reports are controversial due to data analyses. For example, the reported k_m value of some substrate of ABAD/ERAB was five times higher than its natural solubility in the assay employed to measure k_m. Regarding any reported “one-site competitive inhibition” of ABAD/ERAB by Aβ, the k_ivalue estimations were likely impacted by non-physiological concentrations of 2-octanol at high concentrations of vehicle DMSO and, therefore, are likely artefactual. Certain data associated with ABAD/ERAB were found not reproducible, and multiple experimental approaches were undertaken under non-physiological conditions. In contrast, 17β-HSD10 studies prompted a conclusion that Aβ inhibited 17β-HSD10 activity, thus harming brain cells, replacing a prior supposition that “ABAD” mediates Aβ neurotoxicity. Furthermore, it is critical to find answers to the question as to why elevated levels of 17β-HSD10, in addition to Aβ and phosphorylated Tau, are present in the brains of AD patients and mouse AD models. Addressing this question will likely prompt better approaches to develop treatments for Alzheimer’s disease. Full article

The aim of this study was to compare the forces and moments exerted by thermoformed aligners (TFMs) and direct printed aligners (DPAs) on the maxillary left central incisor (21) and adjacent teeth (11, 22) during lingual bodily movement of tooth 21. Methods: An in vitro setup was used to quantify forces and moments on three incisors, which were segmented and fixed onto multi-axis force/moment transducers. TFM were fabricated using 0.76 mm-thick single-layer PET-G foils (ATMOS; American Orthodontics, Sheboygan, WI, USA) and multi-layer TPU foils (Zendura FLX; Bay Materials LLC, Fremont, CA, USA). DPAs were fabricated using TC-85 photopolymer resin (Graphy Inc., Seoul, Republic of Korea). Tooth 21 was planned for bodily displacement by 0.25 mm and 0.50 mm, and six force and moment components were measured on it and the adjacent teeth. Results: TC-85 generated lower forces and moments with fewer unintended forces and moments on the three teeth. TC-85 exerted 0.99 N and 1.53 N of mean lingual force on tooth 21 for 0.25 mm and 0.50 mm activations, respectively; ATMOS produced 3.82 N and 7.70 N, and Zendura FLX produced 3.00 N and 8.23 N of mean lingual force for the same activations, respectively. Bodily movement could not be achieved. Conclusions: The force systems generated by clear aligners are complex and unpredictable. DPA using TC-85 produced lower, more physiological force levels with fewer side effects, which may increase the predictability of tooth movement and enhance treatment outcome. The force levels generated by TFM were considered excessive and not physiologically compatible. Full article

Corydalis yanhusuo W. T. Wang, commonly known as Yanhusuo, is an important and rare medicinal plant resource in China. Its habitat integrity is facing severe challenges due to climate change and human activities. Establishing an integrative quality zoning system for this species is of significant practical importance for resource conservation and adaptive management. This study integrates multiple data sources, including 121 valid distribution points, 37 environmental factors, future climate scenarios (SSP126 and SSP585 pathways for the 2050s and 2090s), and measured content of tetrahydropalmatine (THP) from 22 sampling sites. A predictive framework for habitat suitability and spatial distribution of effective components was constructed using a multi-model coupling approach (MaxEnt, ArcGIS spatial analysis, and co-kriging method). The results indicate that the MaxEnt model exhibits high prediction accuracy (AUC > 0.9), with the dominant environmental factors being the precipitation of the wettest quarter (404.8~654.5 mm) and the annual average temperature (11.8~17.4 °C). Under current climatic conditions, areas of high suitability are concentrated in parts of Central and Eastern China, including the Sichuan Basin, the middle–lower Yangtze plains, and coastal areas of Shandong and Liaoning. In future climate scenarios, the center of suitable areas is predicted to shift northwestward. The content of THP is significantly correlated with the mean diurnal temperature range, temperature seasonality, and the mean temperature of the wettest quarter (p < 0.01). A comprehensive assessment identifies the Yangtze River Delta region, Central China, and parts of the Loess Plateau as the optimal integrative quality zones. This research provides a scientific basis and decision-making support for the sustainable utilization of C. yanhusuo and other rare medicinal plants in China. Full article

Urban transport is a key driver of greenhouse gas emissions in Europe, making its decarbonization essential to achieving EU climate neutrality targets. This study examines how European strategies, such as the Green Deal, the Sustainable and Smart Mobility Strategy, and the Fit for 55 package, are reflected in Romania’s transport policies, with a focus on implementation challenges and urban outcomes in Bucharest. By combining policy analysis, stakeholder mapping, and comparative mobility indicators, the paper critically assesses Bucharest’s current reliance on private vehicles, underperforming public transport satisfaction, and limited progress on active mobility. The study develops a context-sensitive reform framework for the Romanian capital, grounded in transferable lessons from Western and Central European cities. It emphasizes coordinated metropolitan governance, public trust-building, phased car-restraint measures, and investment alignment as key levers. Rather than merely cataloguing policy intentions, the paper offers practical recommendations informed by systemic governance barriers and public attitudes. The findings will contribute to academic debates on urban mobility transitions in post-socialist cities and provide actionable insights for policymakers seeking to operationalize EU decarbonization goals at the metropolitan scale. Full article

High penetration of photovoltaic (PV) generation presents new challenges for voltage regulation in distribution networks (DNs), primarily due to output intermittency and constrained reactive power capabilities. This paper introduces a distributed voltage control method leveraging reactive power compensation from PV inverters. Instead of relying on centralized computation, the proposed method allows each inverter to make local decisions using real-time voltage measurements and delayed communication with neighboring PV nodes. To account for practical asynchronous communication and feedback delay, a Distributed Online Primal–Dual Push–Sum (DOPP) algorithm that integrates a fixed-step delay model into the push–sum coordination framework is developed. Through extensive case studies on a modified IEEE 123-bus system, it has been demonstrated that the proposed method maintains robust performance under both static and dynamic scenarios, even in the presence of fixed feedback delays. Specifically, in static scenarios, the proposed strategy rapidly eliminates voltage violations within 50–100 iterations, effectively regulating all nodal voltages into the acceptable range of [0.95, 1.05] p.u. even under feedback delays with a delay step of 10. In dynamic scenarios, the proposed strategy ensures 100% voltage compliance across all nodes, demonstrating superior voltage regulation and reactive power coordination performance over conventional droop and incremental control approaches. Full article

Human exploitation has been a major driver of marine turtle population declines, particularly affecting naturally scarce species such as the pantropical hawksbill turtle. Although hawksbill sea turtles have been documented in the Gulf of California since the early 20th century, data on their historical demography during periods of high exploitation in this region are nonexistent. We investigated the size structure of hawksbill turtles from the Western Central Gulf of California by examining a unique sample of decorative taxidermies, corresponding to 31 specimens captured during fishing operations near Santa Rosalía, Baja California Sur, Mexico, between 1980 and 1990. An analysis of the curved carapace measures revealed a length range (nuchal notch to posterior of supracaudals) of 29.5–59.5 cm (mean = 38.75 ± 6.67 cm) and a width range of 25.0–51.5 cm (mean = 33.63 ± 5.66 cm), with 87% of specimens having lengths between 30 and 45 cm. Based on the carapace length measurements, we estimated the ages to be between 7 and 20 years, indicating that the population included juveniles. Our findings provide baseline data for an understudied period and region, suggesting that this area previously served as an important juvenile habitat. These results contribute essential historical demographic information for conservation planning. Full article

Objectives: This study aims to explore the histological dimensions of the gingiva and the alveolar mucosa and to evaluate their associations with gingival phenotypic parameters, including gingival thickness (GT), keratinized tissue width (KTW), and gingival transparency. Methods: Histological and clinical assessments were performed on 45 healthy volunteers. Gingival and mucosal tissue samples were collected from the mucogingival junction region of one maxillary central incisor. Histomorphometric analysis included measurements of gingival and mucosal thickness, epithelial thickness, connective tissue thickness, epithelial papilla length and density, and keratinization. Clinical parameters included KTW and probe visibility upon insertion into the gingival sulcus. Correlations were statistically analyzed between clinical and histological parameters. Results: Probe visibility showed no significant correlations with any assessed parameter. Histological gingival thickness strongly correlated with gingival connective tissue thickness, moderately with epithelial thickness and papilla length, and weakly with papilla density. Mucosal thickness was strongly associated with connective tissue thickness and moderately with keratinization, but not with other parameters. KTW exhibited weak correlations with epithelial thickness and papilla length. Conclusions: Variability in gingival and mucosal thickness is primarily determined by connective tissue thickness, with a smaller contribution from the epithelium. Increased thickness is associated with longer, sparser epithelial papillae and with a tendency toward higher keratinization. KTW is significantly associated with epithelial thickness and papilla length, underscoring its relevance in gingival phenotype characterization. Full article

There is limited published guidance available to help less experienced practitioners assess and manage shoulder conditions, including spasticity, after acquired central nervous system (CNS) lesions. To address this gap, 11 spasticity and dystonia experts convened in a 2023 meeting to build on existing guidance, provide consensus on best treatment practice, and develop expert recommendations to guide the diagnosis and treatment of complications of shoulder conditions following CNS lesions. Presentations by each expert on diagnosis and management were followed by discussion; consensus on assessment and treatment practices was identified and recommendations developed. The expert panel recommended an assessment approach structured using the following components: patient history, including interpretation of reported symptoms; observation of postures and pain responses; clinical examination with targeted tests for specific signs; diagnostic tests; and assessment of upper limb impairment, activity limitations, and participation restrictions. This assessment process and the recommended measures recognize the importance of identifying shoulder involvement in upper limb spasticity as part of the diagnostic process in shoulder conditions following CNS lesions. These recommendations provide a practical approach to diagnosis and treatment for clinicians who are less experienced in evaluating and treating such conditions, simplifying otherwise complicated clinical scenarios. Full article

Background: Preterm infants and their families face a challenging experience during their stay in the neonatal intensive care unit (NICU). Family-centered care emphasizes the importance of welcoming parents, involving them in their baby’s daily care, and supporting the development of parenting skills. NICU staff should support parents in understanding their baby’s needs and in strengthening the parent–infant bond. Although many tools outline what parents should learn, there is a limited structured framework to monitor their involvement in the infant’s care. Tracking parental participation in daily caregiving activities could support professionals in effectively guiding families, ensuring a smoother transition to discharge. Aims: The aim of this study was to evaluate the adherence to and effectiveness of a structured tool for parental involvement in the NICU. This tool serves several key purposes: to track the progression and timing of parents’ autonomy in caring for their baby, to support parents in building caregiving competencies before discharge, and to standardize the approach of NICU professionals in promoting both infant care and family engagement. Methods: A structured template form for documenting parental involvement (“together TO-CARE template”, TTCT) was integrated into the computerized chart adopted in the NICU of Modena. Nurses were asked to complete the TTCT at each shift. The template included the following assessment items: parental presence; type of contact with the baby (touch; voice; skin-to-skin); parental involvement in care activities (diaper changing; gavage feeding; bottle feeding; breast feeding); and level of autonomy in care (observer; supported by nurse; autonomous). We evaluated TTCT uploaded data for very low birth weight (VLBW) preterm infants admitted in the Modena NICU between 1 January 2023 and 31 December 2024. Staff compliance in filling out the TTCT was assessed. The timing at which parents achieved autonomy in different care tasks was also measured. Results: The TTCT was completed with an average of one entry per day, during the NICU stay. Parents reached full autonomy in diaper changing at a mean of 21.1 ± 15.3 days and in bottle feeding at a mean of 48.0 ± 22.4 days after admission. The mean length of hospitalization was 53 ± 38 days. Conclusions: The adoption of the TTCT in the NICU is feasible and should become a central component of care for preterm infants. It promotes family-centered care by addressing the needs of both the baby and the family. Encouraging early and progressive parental involvement enhances parenting skills, builds confidence, and may help reduce post-discharge complications and readmissions. Furthermore, the use of a standardized template aims to foster consistency among NICU staff, reduce disparities in care delivery, and strengthen the support provided to families of preterm infants. Full article

In arid and semi-arid climates, where water scarcity is a persistent challenge, accurately estimating reference evapotranspiration (ET) becomes essential for sustainable water management and agricultural planning. The objectives of this study are to compare hourly ET among P–M ASCE, P–M FAO, and P–M KSA mathematical models. In addition to the accuracy assessment of daily ET derived from hourly timestep calculations for the P–M ASCE, P–M FAO, and P–M KSA. To achieve these goals, a total of 525,600-min data points from the Riyadh region, KSA, were used to compute the reference ET at multiple temporal resolutions: hourly, daily, hourly averaged over 24 h, and daily as the sum of 24 h values, across all selected Penman–Monteith (P–M) models. For hourly investigation, the comparison between reference ET computed as average hourly values and as daily/24 h values revealed statistically and practically significant differences. The Wilcoxon test confirmed a statistically significant difference (p < 0.0001) with R² of 94.75% for ASCE, 94.87% for KSA at h_plt = 50 cm, 92.41% for FAO, and 92.44% for KSA at h_plt = 12 cm. For daily investigation, comparing the sum of 24 h ET computations to daily ET measurements revealed an underestimation of daily ET values. The Wilcoxon test confirmed a statistically significant difference (p < 0.0001), with R² exceeding 90% for all studied reference ET models. This comprehensive approach enabled a rigorous evaluation of reference ET dynamics under hyper-arid climatic conditions, which are characteristic of central Saudi Arabia. The findings contribute to the growing body of literature emphasizing the importance of high-frequency meteorological data for improving ET estimation accuracy in arid and semi-arid regions. Full article

Water science has always been a central part of modern scientific research. In this study, the viscosity and hydrogen bond structures of methanol aqueous solutions with different molar ratios were investigated via confocal microscopic Raman spectroscopy. The Raman spectra of methanol in the CH and CO stretching regions were measured in order to investigate the structure of water/methanol molecules. The points of transition were identified by observing changes in viscosity following changes in concentration, and the bands were assigned to the C-H bond vibration shifts where the molar ratios of methanol and water were 1:3 and 3:1. Furthermore, the large band shift of 19 cm⁻¹ between the methanol solutions with the lowest and highest concentrations contained three hydrogen bond network modes, affecting the viscosity of the solution. This study provides an explanation for the relationship between the microstructures and macroscopic properties of aqueous solutions. Full article

The article is focused on the quantitative assessment of the thermal impact of polar mesospheric clouds (PMCs) on the mesopause caused by the emission of absorbed solar and terrestrial infrared (IR) radiation by cloud particles. For this purpose, a parameterization of mesopause heating by PMC crystals has been developed, the main feature of which is to incorporate the thermal properties of ice and the interaction of cloud particles with the environment. Parametrization is based on PMCs zero-dimensional (0-D) model and uses temperature, pressure, and water vapor data in the 80–90 km altitude range retrieved from Solar Occultation for Ice Experiment (SOFIE) measurements. The calculations are made for 14 PMC seasons in both hemispheres with the summer solstice as the central date. The obtained results show that PMCs can make a significant contribution to the heat balance of the upper atmosphere, comparable to the heating caused, for example, by the dissipation of atmospheric gravity waves (GWs). The interhemispheric differences in heating are manifested mainly in the altitude structure: in the Southern Hemisphere (SH), the area of maximum heating values is 1–2 km higher than in the Northern Hemisphere (NH), while quantitatively they are of the same order. The most intensive heating is observed at the lower boundary of the minimum temperature layer (below 150 K) and gradually weakens with altitude. The NH heating median value is 5.86 K/day, while in the SH it is 5.24 K/day. The lowest values of heating are located above the maximum of cloud ice concentration in both hemispheres. The calculated heating rates are also examined in the context of the various factors of temperature variation in the observed atmospheric layers. It is shown in particular that the thermal impact of PMC is commensurate with the influence of dissipating gravity waves at heights of the mesosphere and lower thermosphere (MLT), which parameterizations are included in all modern numerical models of atmospheric circulation. Hence, the developed parameterization can be used in global atmospheric circulation models for further study of the peculiarities of the thermodynamic regime of the MLT. Full article