Search Results (309)

Background: This study examines current trends in Canada using data from the Canadian Joint Replacement Registry (CJRR) and includes a national survey to understand the varied uptake of cement for femoral stem fixation. Methods: The survey was available online and the website link was distributed to all orthopaedic surgeons through the Canadian Orthopaedic Association between September and December 2022. The CJRR obtained data from the Canadian Institute for Health Information (CIHI), and information pertaining to patients 55 years of age and older who underwent hemiarthroplasty for hip fracture in Canada between April 2017 and March 2022 was used. Results: Most respondents practiced in an academic community setting (52%). Only 53% of respondents reported using cement, and 71% indicated that cemented fixation was the best practice. The main reasons for using uncemented stems were less operative time (23%), cement disease concerns (11%), and surgeons’ comfort (10%). Similarly, CJRR data showed only 51% cemented fixation among 42,386 hemiarthroplasties performed between 2017 and 2022. The proportion of cemented implants varied by province, but overall, the increase in the use of cement from 2017 to 2022 was from 42.9% to 57.7%. Conclusions: This study demonstrates variability in the use of cement for femoral fixation despite solid evidence showing improved outcomes using cement. Some of the main reasons in favour of uncemented stems include operative time, surgical training, and concerns about cement disease. Establishing clear position statements and guidelines supporting cemented fixation may be prudent to build universal consensus on this practice. Full article

The management of adult spinal deformity (ASD) has evolved dramatically over the past century, transitioning from external bracing and in situ fusion to complex, technology-driven surgical interventions. This review traces the historical development of spinal deformity correction and highlights contemporary enabling technologies that are redefining the surgical landscape. Advances in stereoradiographic imaging now allow for precise, low-dose three-dimensional assessment of spinopelvic parameters and segmental bone density, facilitating individualized surgical planning. Robotic assistance and intraoperative navigation improve the accuracy and safety of instrumentation, while patient-specific rods and interbody implants enhance biomechanical conformity and alignment precision. Machine learning and predictive modeling tools have emerged as valuable adjuncts for risk stratification, surgical planning, and outcome forecasting. Minimally invasive deformity correction strategies, including anterior column realignment and circumferential minimally invasive surgery (cMIS), have demonstrated equivalent clinical and radiographic outcomes to traditional open surgery with reduced perioperative morbidity in select patients. Despite these advancements, complications such as proximal junctional kyphosis and failure remain prevalent. Adjunctive strategies—including ligamentous tethering, modified proximal fixation, and vertebral cement augmentation—offer promising preventive potential. Collectively, these innovations signal a paradigm shift toward precision spine surgery, characterized by data-informed decision-making, individualized construct design, and improved patient-centered outcomes in spinal deformity care. Full article

Introduction: Two-stage revision with an antibiotic-loaded, temporary static cement spacer is a common treatment for periprosthetic joint infection (PJI) of the knee. However, limited data exists on in vivo antibiotic elution kinetics after spacer implantation. This pilot study uses the technique of microdialysis (MD) to collect intra-articular knee samples. The aim was to evaluate MD as an intra-articular sampling method to detect spacer-eluted antibiotics within 72 h after surgery and to determine whether they show specific elution kinetics. Methods: Ten patients (six male, four female; age median 71.5 years) undergoing two-stage revision for knee PJI were included. A MD catheter was inserted into the joint during explantation of the infected inlying implant and implantation of a custom-made static spacer coated with COPAL cement (0.5 g gentamicin (G) and 2 g vancomycin (V)). Over 72 h postoperatively, samples were collected and analyzed for spacer-eluted antibiotics, intravenously administered antibiotics (e.g., cefazolin and cefuroxime), metabolic markers (glucose and lactate), and Interleukin-6 (IL-6). Local and systemic levels were compared. Results: All catheters were positioned successfully and well tolerated for 72 h. Antibiotic concentrations in MD samples peaked within the first 24 h (G: median 9.55 µg/mL [95% CI: 0.4–17.36]; V: 37.57 µg/mL [95% CI: 3.26–81.6]) and decreased significantly over 72 h (for both p < 0.05, G: 4.27 µg/mL [95% CI: 2.26–7.2]; V: 9.69 µg/mL [95% CI: 3.86–24]). MD concentrations consistently exceeded blood levels (p < 0.05), while intravenously administered antibiotics showed higher blood concentrations. Glucose in MD samples decreased from 17.71 mg/dL to 0.89 mg/dL (p < 0.05). IL-6 and lactate concentrations showed no difference between MD and blood samples. Conclusions: Monitoring antibiotics eluted by a static spacer with intra-articular MD for 72 h is feasible. Gentamicin and vancomycin levels remained above the minimal inhibitory concentration. Differentiating infection from surgical response using metabolic and immunological markers remains challenging. Prolonged in vivo studies with MD are required to evaluate extended antibiotic release in two-stage exchanges. Full article

Background/Objectives: Ketorolac is commonly used for pain management after orthopedic surgery, but concerns regarding its effects on postoperative complications remain. This study evaluates the impact of ketorolac use on short- and long-term outcomes in adult patients undergoing uncemented primary total hip arthroplasty (THA), where implant stability relies on biological fixation through bone ingrowth into a porous-coated prosthesis rather than bone cement. Methods: A retrospective cohort study was conducted using the TriNetX Research Network. Patients aged 18 years or older who underwent uncemented primary THA between 1 January 2004 and 1 January 2024 were included. Two cohorts were compared: those who received ketorolac on the day of or within one week of surgery and those who did not. Cohorts were propensity score-matched. Outcomes were assessed at 30 days, 1 year, and 5 years postoperatively. Results: At 30 days, ketorolac use was associated with significantly lower risks of transfusion (RR: 0.6, p < 0.01). However, it was linked to higher rates of acute posthemorrhagic anemia (RR: 1.2, p < 0.01) and periprosthetic fracture (RR: 1.4, p < 0.01). At 1 year, ketorolac use was associated with reduced risks of death (RR: 0.8, p < 0.01) and transfusion (RR: 0.7, p < 0.01), but increased risks of acute posthemorrhagic anemia (RR: 1.2, p < 0.01), deep surgical site infection (SSI) (RR: 1.8, p = 0.01), superficial SSI (RR: 1.9, p < 0.01), periprosthetic joint infection (RR: 1.1, p < 0.01), wound dehiscence (RR: 1.2, p < 0.01), periprosthetic mechanical complication (RR: 1.2, p < 0.01), and periprosthetic fracture (RR: 1.5, p < 0.01). Conclusions: Our findings highlight the complex risk profile of ketorolac in uncemented THA patients and suggest that clinicians should carefully consider individual patient factors and engage in shared decision-making when counseling patients on the use of ketorolac in the perioperative setting. Full article

Poly(methyl methacrylate) (PMMA)-based bone cements are widely used in orthopaedic surgery, yet their inherent brittleness, lack of bioactivity, and exothermic polymerization remain critical limitations. Recent strategies have focused on modifying PMMA with functional additives to improve not only mechanical performance but also thermal behaviour and biological interactions. This study investigates the mechanical properties of two commercial PMMA cements—Palamed^® (antibiotic-free) and Refobacin Plus G (gentamicin-loaded)—reinforced with glassy carbon (GC) particles of two different grain sizes (0.4–1.2 µm and 20–50 µm) and various concentrations. The results demonstrate that coarse GC particles (20–50 µm) significantly reduced compressive strength, particularly in the antibiotic-loaded cement. In contrast, the incorporation of fine GC particles (0.4–1.2 µm) did not markedly impair mechanical performance in Palamed^®, suggesting better compatibility with the PMMA matrix. In addition to mechanical enhancement, the structural and chemical stability of glassy carbon may contribute to improved biological response and reduced polymerization heat. These findings highlight the potential of glassy carbon as a functional additive for designing PMMA-based biomaterials that combine improved mechanical properties with favourable characteristics for long-term implant integration. Full article

Fungal prosthetic joint infection (fPJI) is one of the orthopaedic pathologies where there is no clear evidence, guidelines or algorithm to guide the surgeon in its management. This is in addition to the difficulty with which these infections are diagnosed, isolated and treated. Fungi form notorious biofilms that are difficult to eradicate once formed and that display resistance to antimicrobial agents. These biofilms have been shown to act synergistically with biofilms of bacteria, further adding to medical treatment resistance. We have reviewed the literature for reports that describe the results of different methods in surgically treating fPJI. We found that surgical management with two stages remains the gold standard for treatment of fPJI, as is the case for bacterial PJI (bPJI). We have investigated medical treatment, debridement with implant retention (DAIR) and staged revisions and whether a reasonable recommendation can be made based on the best knowledge and practice available. From the data on bPJI, there exists a role for conservative management of acute PJI with debridement, antibiotics and implant retention (DAIR). While fPJI and bPJI both represent infections, the differences in our ability to detect these infections clinically, culture the pathogens and treat them with proper antimicrobial agents, along with the difference in the reported results of the surgical treatment, make us believe that these two types of infections should not be treated in the same manner. With all this in mind, we reviewed several reports in the literature on fPJI to determine the efficacy of current treatment modalities, including DAIR, which followed current guidelines for PJI. Data show an overall treatment success rate of 64.4% [range 17.4–100%]. Subgroup analysis revealed a success rate of 11.6% [range 0–28.7%] in patients treated with DAIR. There is no doubt that DAIR should not be encouraged as it consistently has a bad record. Although there are not enough studies or numbers of patients to show an evidence-based preference over one- or two-staged revisions, the two-stage revision of fPJI consistently shows better results and should be considered as the gold standard of management in cases of revision fPJI. This should also be coupled with proper expertise, follow-ups and recommended lengths of medical treatment, which should not be less than six months. From the review of these data, we have developed reasonable recommendations for the management of fPJI. These recommendations center on staged surgical debridement along with medical management. Medical treatment should be for at least 6 months under the guidance of an infectious disease team and based on intraoperative cultures. In the case of local antimicrobial treatment reported in the literature, many patients with fPJI were found to have a polymicrobial infection. As a result, it is our recommendation that antifungals as well as antibacterials should be incorporated into the cement spacer mix of these cases. Fungal PJI remains an exceedingly difficult pathology to treat and should be managed by experienced surgeons in a well-equipped institution. Full article

Star polymers—macromolecules featuring multiple arms radiating from a central core—offer unique potential for biomedical applications due to their tunable architecture, multifunctionality and ability to incorporate stimuli-responsive and biocompatible components. In this study, functional star polymers with oligo (ethylene glycol) methyl ether methacrylate (OEOMA) arms and 2-(dimethylamino)ethyl methacrylate (DMAEMA) core units were synthesized via atom transfer radical polymerization (ATRP) using the “arm-first” strategy. The star polymers were used as nanoreactors for the in situ reduction of silver nitrate to form silver nanoparticles (AgNPs) without additional reducing agents. UV–Vis spectroscopy confirmed the formation of spherical AgNPs with absorption maxima around 430 nm, and transmission electron microscopy revealed uniform particle morphology. These hybrid nanomaterials (STR-AgNPs) were incorporated into polymethyl methacrylate (PMMA)-based bone cement to impart antibacterial properties. Mechanical testing showed that the compressive strength remained within acceptable limits, while antibacterial assays against E. coli demonstrated a significant inhibition of bacterial growth. These findings suggest that STR-AgNPs serve as promising candidates for infection-resistant bone implants, providing localized antibacterial effects while maintaining mechanical integrity and biocompatibility. Full article

Background/Objectives: This in vitro study investigated the retention of three different geometrical designs of short titanium base (Ti-base) abutments used in implant-supported zirconia crowns. The advent of digital technology has facilitated the integration of Ti-base abutments into implant dentistry by improving time efficiency, precision, and patient comfort. Methods: Three types of short Ti-base abutments were evaluated: Geo SRN multibase^® (Group A), Herilink^® (Group B), and TS Link^® (Group C), each with a height of 4 mm and gingival height of 1 mm (n = 20 per group). Zirconia crowns (LUXEN^® Smile S2, DentalMax, Republic of Korea) were modified for the testing setup and fabricated using CAD/CAM technology, then bonded to the abutments with RelyX^® Luting 2 resin-modified glass ionomer cement. Pull-out tests were conducted at a crosshead speed of 1 mm/min to assess retention. Results: One-way ANOVA and post hoc Tukey tests revealed significant differences in retention values among the different abutment shapes (p < 0.05). The mean retention forces were 194.65 N for Group A, 241.33 N for Group C, and 360.20 N for Group B. Conclusions: The geometrical design of Ti-base short abutments significantly affects the retention of CAD/CAM zirconia crowns, with hexagonal shapes (Group B) demonstrating superior retention. Clinically, selecting an abutment design with enhanced mechanical retention may improve the long-term success of implant-supported restorations. Full article

Background/Objectives: Total hip arthroplasty (THA) remains a widely utilized and effective intervention for patients with end-stage hip osteoarthritis. Although multiple surgical approaches and fixation techniques are available, their application in non-tertiary clinical settings is less frequently documented. This study primarily aims to provide an educational overview of stepwise THA procedures using intraoperative visual documentation, with a secondary, exploratory assessment of postoperative outcomes related to surgical approach and fixation strategy. Methods: A prospective observational study was conducted at Arad Clinical Emergency County Hospital between March 2023 and March 2024, involving 23 patients undergoing primary THA. Patients received either cemented or uncemented femoral components based on intraoperative bone quality. Procedures were documented using stepwise intraoperative photographs and postoperative radiographs. Recovery was assessed using the Harris Hip Score (HHS) and the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) at both six weeks and six months postoperatively. Results: Both lateral (Hardinge) and posterolateral approaches provided adequate exposure with reproducible results. Cemented implants allowed for immediate full weight-bearing and were preferred in elderly patients with poor bone quality, while uncemented components were used in younger patients with good bone density, requiring a delayed weight-bearing protocol. Functional scores improved in both groups between six weeks and six months. At six weeks, the mean HHS was 87.6 ± 6.2 and WOMAC 18.3 ± 4.8; by six months, these improved to 91.8 ± 5.1 and 12.7 ± 3.9, respectively. Cemented fixation demonstrated slightly better outcomes at both time points; however, intergroup differences remained below the Minimal Clinically Important Difference (MCID) thresholds. Conclusions: Tailored surgical approaches and fixation strategies, guided by intraoperative assessment, result in favorable short- and mid-term recovery profiles in THA. The integration of intraoperative visual documentation and patient-reported outcome measures (PROMs) enhances procedural transparency while supporting evidence-based decision-making and surgical training. Full article

This study aimed to evaluate prosthetic complications, implant survival rates, and marginal bone loss in implant-supported monolithic restorations compared to metal-ceramic restorations. The study was registered in PROSPERO (CRD420251022336) and conducted following the Cochrane Handbook for Systematic Reviews of Interventions and PRISMA guidelines. A systematic search was conducted in the electronic databases MEDLINE/PubMed, Web of Science, Scopus, Embase, and ProQuest for articles published up to December 2024. The inclusion criteria comprised studies evaluating only randomized clinical trials that evaluated implant-supported monolithic restorations directly compared to metal-ceramic restorations, considering any type of ceramic material and regardless of the fixation system (screw-retained or cemented), with a minimum follow-up of one year. A meta-analysis was performed using RevMan 5.4 software, and the risk of bias and certainty of evidence were assessed using the RoB 2.0 and GRADE tools, respectively. A total of six studies were included, all of which exclusively evaluated monolithic zirconia single crowns over follow-up periods ranging from 1 to 3 years. None of the included studies evaluated fixed partial dentures or restorative materials other than monolithic zirconia. In total, 267 patients (mean age range: 18–57 years) were analyzed, with a total of 174 implant-supported monolithic zirconia crowns and 165 metal-ceramic single crowns in the posterior region (premolars and molars). The meta-analysis revealed that implant-supported monolithic zirconia single crowns exhibited significantly fewer prosthetic complications compared to metal-ceramic single crowns (p < 0.0001; Risk Ratio [RR]: 0.26; Confidence Interval [CI]: 0.14–0.47). However, no statistically significant differences were observed between implant-supported monolithic zirconia and metal-ceramic single crowns regarding implant survival rates (p = 0.36; RR: 1.66; CI: 0.56–4.94) or marginal bone loss (p = 0.15; Mean Difference [MD]: −0.05; CI: −0.11–0.02). The risk of bias assessment indicated that four studies had a low risk of bias. However, the certainty of evidence was classified as low for prosthetic complications and implant survival rates and very low for marginal bone loss. Within the limitations of this review, it can be concluded that implant-supported monolithic zirconia single crowns can be considered a favorable treatment option as they show comparable implant survival and bone stability to metal-ceramic crowns, with a potential reduction in short-term prosthetic complications such as screw loosening and ceramic chipping. However, due to the limited number of studies included and low certainty of evidence, further long-term research is still needed to confirm their clinical performance over time. Full article

Background/Objectives: Total hip arthroplasty (THA) is a highly effective treatment for end-stage hip disease, but the increasing volume of procedures demands a focus on value-based healthcare (VBHC) to ensure optimal outcomes. This study proposes a novel approach to evaluate the value delivered by THA using direct costs and patient-reported outcome measures (PROMs). Methods: This retrospective cohort study included patients undergoing primary THA for unilateral osteoarthritis at two hospitals between 2018 and 2021. PROMs specific to hip osteoarthritis were assessed preoperatively and in the second postoperative year. The delivered quality was calculated using PROM results in comparison with the minimal clinically important difference (MCID) and patient acceptable symptom state (PASS) thresholds. The associated cost was defined as direct THA expenses in comparison with the median direct costs of the cohort series, and the value was calculated as the ratio of quality over cost. A multivariable linear regression was performed to identify the factors associated with the THA value. Results: Among 224 patients (70 ± 10 years, 46% males), THA was of satisfactory value (≥1.0) for 82%. The THA value was lower for patients of female sex (β −0.27, p = 0.047), with higher preoperative PROMs (β −0.36, p < 0.001), previous contralateral THA (β −0.36, p = 0.049), or ipsilateral hip surgery (β −1.41, p < 0.001) with custom (β −0.76, p = 0.011) or fully cemented (β −0.83, p = 0.021) implants. Conclusions: The proposed methodology effectively assessed the THA value, revealing satisfactory outcomes for most patients but also identifying areas for improvement. These findings emphasize the need for risk-adjusted VBHC models to enhance equity and efficiency in arthroplasty care. Full article

Background/Objectives: Achieving optimal primary stability in cemented total hip arthroplasty remains a critical factor influencing long-term implant success. Variability in cementation techniques can significantly affect biomechanical performance, yet consensus on best practices is lacking. This study investigates the influence of cementation parameters on femoral stem fixation. Methods: This in vitro comparative study evaluated four cementation techniques—Classic (line-to-line), Press-Fit (undersized reaming), Overreaming (oversized reaming), and Valgus Malpositioning (15° deviation). An experimental model using standardized Polyurethane (PU) bone surrogates was developed. Mechanical testing assessed axial deformation and ultimate load capacity to failure. Results: The Press-Fit technique demonstrated significantly greater deformation (17.10 ± 0.89 mm) but a reduced load capacity (6317.47 ± 518.34 N) compared to the Classic approach. Overreaming and Valgus techniques both showed reduced mechanical performance, with Overreaming yielding the lowest structural integrity. Conclusions: Cement mantle thickness emerged as the primary determinant of biomechanical stability, surpassing the impact of implant positioning. While increased mantle thickness improves energy absorption, it may compromise ultimate strength. These findings underscore the importance of optimizing the cementation technique to balance flexibility and mechanical resistance, guiding surgical protocols toward improved implant longevity. This study introduces a novel integrative approach combining fluoroscopic assessment of cement mantle morphology with mechanical testing in a standardized model, providing new evidence on the relative influence of mantle thickness and implant malposition on femoral stem stability. Full article

Purpose: The aim of this study was to evaluate the long-term clinical results of two different implant–abutment connection types (screw-retained/Morse locking taper), marginal bone loss, and complications in prosthetic restorations. Materials and Methods: In 2017–2018, 579 implants and 242 implant-supported restorations applied to 137 patients were included in the study. Patients were recalled every six months, clinical evaluations were accomplished, and complications were recorded. When examining the distribution of prosthetic restorations by type, it was determined that 38 (15.70%) were single crowns, 136 (56.19%) were fixed partial cement-retained bridge restorations, 53 (21.90%) were fixed partial screw-retained bridge restorations, and 15 (6.19%) were overdenture prostheses. Findings: Overall, complications included eighteen (21.68%) retention losses, nineteen (22.89%) instances of screw loosening, twenty-one (25.30%) veneer ceramic fractures, three (3.61%) acrylic base fractures, fourteen (16.87%) cases of peri-implantitis, and eight (9.64%) implant losses. Conclusions: Differences in complication rates were observed between implants with different implant–abutment connection designs. While no significant differences were found regarding annual mesial and distal marginal bone loss for implants with conical locking connections, a significant difference was detected in those with screw-retained connections. In both implant groups, mesial and distal marginal bone loss progressed gradually over the follow-up period. Full article

Background/Objectives: Traditional treatment for chronic osteomyelitis is temporary implantation of antibiotic-impregnated cement beads, followed by bone grafting after the infection is controlled. In this way, a staged operation is needed, and undergoing repetitive general anesthesia is a burden. Moreover, damage to the soft tissue at the surgical site due to several incisions is a concern. This study was conducted to investigate the outcomes of one-stage antibiotic-mixed cement blocks, instead of beads, used as a primary salvage procedure to treat chronic osteomyelitis of the foot, ankle, and lower leg. Methods: Twenty patients with chronic osteomyelitis of the leg and foot were included. They underwent complete debridement of the infected bone, and antibiotic-mixed cement fillings were placed into the defected bone space. Full-weight-bearing activities were allowed immediately after surgery. Results: For 16 of the 18 patients, infection was controlled after one-time surgery. Repeat antibiotic cement-filling surgery was necessary for two patients. Two-staged surgery with continuous irrigation and cement filling was necessary for one large tibial lesion. Conversion into arthrodesis of the metatarsophalangeal joint was necessary for metatarsal head infection. Conclusions: One-stage surgery with complete debridement and antibiotic-mixed cement filling is a simple and effective procedure for treating intractable chronic osteomyelitis, which makes full-weight-bearing walking possible immediately after surgery. Full article

Background: Although cemented total knee arthroplasty (TKA) is considered the standard fixation technique, the emerging trend toward cementless fixation has created the need for a detailed comparison. In a previous study, we reported the 5-year results comparing cementless and hybrid cemented TKAs using the same implant design. The purpose of this study was to assess the long-term follow-up at a minimum of 10 years. Methods: A retrospective analysis was performed on 120 TKAs (60 cementless, 60 hybrid cemented) conducted between 2003 and 2007 using the e.motion posterior cruciate-retaining knee prosthesis with a floating-platform mobile polyethylene bearing (Aesculap, Tuttlingen, Germany). Demographic and clinical data were collected; radiographic follow-up was performed with attention to signs of loosening, while complications and revision surgery were assessed using competing risk analysis. Operative time was recorded as an indicator of surgical efficiency. Results: At 10 years, 59 TKAs (54 patients) were available for long-term follow-up. Both fixation groups demonstrated significant improvement in Knee Society Scores (KSSs) compared to preoperative values (p < 0.001). However, there was no significant difference in KSSs between the two groups at 10 years follow-up (p = 0.480). The 10-year cumulative incidence of revision was 8.4% in both groups (p = 0.721), and that of aseptic loosening was identical at 3.4% (p = 0.967). Although radiolucent lines were noted in three tibial components of the cementless group, the difference was not statistically significant (p = 0.075). Notably, the cementless group demonstrated a significantly shorter operative time with a mean difference of 10 min (p = 0.017). Conclusions: At a minimum follow-up of 10 years, there were no significant differences between the hybrid cemented and cementless groups in revision rates, cumulative incidences, clinical scores, or radiological signs of loosening, confirming the long-term effectiveness of both fixation methods in clinical practice. Full article