Search Results (5,997)

Allium ursinum (wild garlic) has long been collected and consumed as food and medicine in the north temperate zone, where its popularity is growing. Colchicum autumnale and Convallaria majalis contain toxic alkaloids. Their habitats overlap, and without flowers, their vegetative organs are similar. Confusing the leaves of Colchicum or Convallaria with the leaves of wild garlic has repeatedly led to serious human and animal poisonings. Our goal was to find a histological characteristic that makes the separation of these leaves clear. We compared the anatomy of foliage leaves of these three species grown in the same garden (Debrecen, Hungary, Central Europe). We used a bright-field microscope to characterize the transversal sections of leaves. Cell types of epidermises were compared based on peels and different impressions. We established some significant differences in the histology of leaves. The adaxial peels of Allium consist of only “long” cells without stomata, but the abaxial ones show “long”, “short” and “T” cells with wavy cell walls as a peculiarity, and stomata. Convallaria and Colchicum leaves are amphystomatic, but in the case of Allium, they are hypostomatic. These traits were confirmed with herbarium specimens. Our results help to clearly identify these species even in mixed, dried plant material and may be used for diagnostic purposes. Full article

Increased food production demands, labor shortages, and environmental concerns are driving the need for innovative agricultural technologies. However, effective adoption depends critically on aligning robot innovations with the needs of farmers. This paper examines the alignment between the needs of farmers and the robotic systems used in row crop farming. We review current commercial agricultural robots and research, and map these to the needs of farmers, as expressed in the literature, to identify the key issues holding back large-scale adoption. From initial pool of 184 research articles, 19 survey articles, and 82 commercial robotic solutions, we selected 38 peer-reviewed academic studies, 12 survey articles, and 18 commercially available robots for in-depth review and analysis for this study. We identify the key challenges faced by farmers and map them directly to the current and emerging capabilities of agricultural robots. We supplement the data gathered from the literature review of surveys and case studies with in-depth interviews with nine farmers to obtain deeper insights into the needs and day-to-day operations. Farmers reported mixed reactions to current technologies, acknowledging efficiency improvements but highlighting barriers such as capital costs, technical complexity, and inadequate support systems. There is a notable demand for technologies for improved plant health monitoring, soil condition assessment, and enhanced climate resilience. We then review state-of-the-art robotic solutions for row crop farming and map these technological capabilities to the farmers’ needs. Only technologies with field validation or operational deployment are included, to ensure practical relevance. These mappings generate insights that underscore the need for lightweight and modular robot technologies that can be adapted to diverse farming practices, as well as the need for farmers’ education and simpler interfaces to robotic operations and data analysis that are actionable for farmers. We conclude with recommendations for future research, emphasizing the importance of co-creation with the farming community to ensure the adoption and sustained use of agricultural robotic solutions. Full article

Porous materials are characterized by the pore surface area (S) and volume (V) accessible to a confined fluid. For mesoporous materials NMR measurements of diffusion are used to assess the S/V ratio, because at short times, only the diffusivity of molecules in the adsorbed layer is affected by confinement and the fractional population of these molecules is proportional to the S/V ratio. For materials with sub-nanometer pores, this might not be true, as the adsorbed layer can encompass the entire pore volume. Here, using molecular simulations, we explore the role played by S and S/V in determining the dynamical behavior of two carbon-bearing fluids—CO₂ and ethane—confined in sub-nanometer pores of silica. S and V in a silicalite model representing a sub-nanometer porous material are varied by selectively blocking a part of the pore network by immobile methane molecules. Three classes of adsorbents were thus obtained with either all of the straight (labeled ‘S-major’) or zigzag channels (‘Z-major’) remaining open or a mix of a fraction of both types of channel blocked, resulting in half of the total pore volume being blocked (‘Half’). While the adsorption layers from opposite surfaces overlap, encompassing the entire pore volume for all pores except the intersections, the diffusion coefficient is still found to be reduced at high S/V, especially for CO₂, albeit not so strongly as would be expected in the case of wider pores. This is because of the presence of channel intersections that provide a wider pore space with non-overlapping adsorption layers. Full article

Background and clinical significance: Trichoblastomas are rare, mixed epithelial tumors with a mesenchymal component and hair follicle differentiation. Case presentation: Herein, we present a case report of a 51-year-old female patient presenting to the obstetrics and gynecology department with complaints of edema and erythema of the right Bartholin gland, and a lesion measuring 2 cm on the right lateral edge of the mons pubis, towards the inguinal fold. Marsupialization of the Bartholin gland was performed, as well as an incision into the pubo-inguinal lesion, which the patient depicted as grossly resembling an ingrown hair. Upon incision into the pubic–inguinal lesion, it was dark brown in color and spontaneously popped out of the subcutis, without an attempt at enucleation. Histology and subsequent immunohistochemistry of the lesion showed a blue basaloid tumor with an extensive pigment component located deep in the dermis that was sharply demarcated from the surrounding tissues. Conclusion: Immunohistochemistry was diffusely and strongly positive for epithelial markers; melanocytic markers were positive only in dendritic melanocytes dispersed within the tumors, and the proliferative index was low. As such, the tumor was identified as melanotrichoblastoma. Full article

The present paper proposes a three-dimensional (3D) spherical shell model for the magneto-electro-elastic (MEE) free vibration analysis of simply supported multilayered smart shells. A mixed curvilinear orthogonal reference system is used to write the unified 3D governing equations for cylinders, cylindrical panels and spherical shells. The closed-form solution of the problem is performed considering Navier harmonic forms in the in-plane directions and the exponential matrix method in the thickness direction. A layerwise approach is possible, considering the interlaminar continuity conditions for displacements, electric and magnetic potentials, transverse shear/normal stresses, transverse normal magnetic induction and transverse normal electric displacement. Some preliminary cases are proposed to validate the present 3D MEE free vibration model for several curvatures, materials, thickness values and vibration modes. Then, new benchmarks are proposed in order to discuss possible effects in multilayered MEE curved smart structures. In the new benchmarks, first, three circular frequencies for several half-wave number couples and for different thickness ratios are proposed. Thickness vibration modes are shown in terms of displacements, stresses, electric displacement and magnetic induction along the thickness direction. These new benchmarks are useful to understand the free vibration behavior of MEE curved smart structures, and they can be used as reference for researchers interested in the development of of 2D/3D MEE models. Full article

Industry 4.0 represents a significant transformation in industrial systems through digital integration, presenting both opportunities and challenges for aligning the workforce, especially in emerging economies like Thailand. This study adopts a sequential exploratory mixed-method approach to investigate how strategic human resource development (HRD) contributes to sustainable transformation, defined as the enduring alignment between workforce capabilities and technological advancement. The qualitative phase involved case studies of five Thai manufacturing firms at varying levels of Industry 4.0 adoption, utilizing semi-structured interviews with executives and HR leaders. Thematic findings informed the development of a structured survey, distributed to 144 firms. Partial Least Squares Structural Equation Modeling (PLS SEM) was used to test the hypothesized relationships among business pressures, leadership support, HRD preparedness, and technological readiness. The analysis reveals that business pressures significantly influence leadership and HRD, which in turn facilitate technological readiness. However, business pressures alone do not directly enhance readiness without the support of intermediaries. These results underscore the critical role of integrated HRD and leadership frameworks in enabling sustainable digital transformation. This study contributes to theoretical perspectives by integrating HRD, leadership, and technological readiness, offering practical guidance for firms aiming to navigate the complexities of Industry 4.0. Full article

Background: Breast cancer remains a major public health challenge in Latin America, where access to personalized risk assessment tools is still limited. This study aimed to evaluate the implementation of a polygenic risk score (PRS)-based stratification model combined with remote genomic counseling in Colombian women with sporadic breast cancer and healthy women. Methods: In 2023, an embedded mixed-methods observational study was conducted in Medellín involving 1997 women aged 40–75 years who underwent clinical PRS testing. The intervention integrated PRS-based risk categorization with individualized risk factor assessment and lifestyle recommendations delivered through a remote counseling platform. Results: PRS analysis classified 9.7% of women as high risk and 46% as low risk. Healthier lifestyle patterns were significantly associated with lower PRS categories (p = 0.034). Physical activity showed a protective effect (OR = 0.60, 95% CI: 0.5–0.8), while prior smoking, elevated BMI, and sedentary behavior were associated with higher risk. The counseling model achieved high delivery (93%) and satisfaction (85%) rates. Qualitative insights revealed improved understanding of genomic risk and greater engagement in preventive behaviors. Only one new case of breast cancer was detected among intermediate-risk participants, with a diagnostic lead time of 12 months. Conclusions: These findings support the feasibility, acceptability, and potential impact of integrating PRS and genomic counseling in cancer prevention strategies in middle-income settings. Full article

Objectives: To assess the role of a real-time therapeutic drug monitoring (TDM)-guided expert clinical pharmacological advice (ECPA) program of isavuconazole in preventing under- or overexposure with the intent of improving efficacy and safety outcomes in the critically ill patients. Methods: This retrospective study included critical patients receiving intravenous isavuconazole for prophylaxis or treatment of invasive fungal infections (IFI) and undergoing at least one TDM-guided ECPA in the period 1 March 2021–31 March 2025. Desired isavuconazole exposure was defined as trough concentrations (C_min) of 1.0–5.1 mg/L. Efficacy outcome was assessed by means of bronchoalveolar (BAL) galactomannan (GM) index, breakthrough IFI, and 30-day mortality rate, whereas safety was assessed by means of hepatic test disturbances (HTD). Univariate analysis was carried out for assessing potential variables associated with isavuconazole under- or overexposure and for comparing features of solid organ transplant (SOT) recipients vs. non-SOT patients. Proportions of isavuconazole C_min underexposure, desired exposure, and overexposure were assessed at different timepoints from starting therapy. Trends over time of HTD in relation to isavuconazole exposure were assessed separately in patients having HTD or not at baseline. Results: Overall, 32 critical patients were included. A total of 166 TDM-guided ECPAs were provided. Median (IQR) average isavuconazole C_min was 3.5 mg/L (2.1–4.6 mg/L). Proportions of ECPAs with isavuconazole C_min under- and overexposure were 4.2% (7/166) and 16.3% (27/166), respectively. Patients experiencing underexposure had higher body mass index (30.1 vs. 25.5 kg/m²; p < 0.001). Trends of isavuconazole C_min under- and overexposure changed over time, significantly decreasing the former (10.5% <7 days vs. 4.3% 7–28 days vs. 0.0% >28 days; p < 0.001) and increasing the latter (5.3% <7 days vs. 12.8% 7–28 days vs. 29.3% >28 days; p < 0.001). HTD occurred in 15/32 patients, most of whom (10/15) were affected just at baseline. Patients with transient or persistent overexposure trended toward a higher risk of HTD compared to those without (33.3% vs. 8.3%; p = 0.11). Conclusions: A real-time TDM-guided approach could be a valuable tool for optimizing isavuconazole exposure, especially whenever dealing with obese patients or with prolonged treatment. Full article

During red wine production, managing the pomace cap is key for a successful fermentation, allowing the extraction of phenolics and other metabolites and providing the necessary oxygen for yeast activity. In recent years, automatic cap management systems based on the injection of gases have gained popularity, despite the limited scientific information regarding the outcomes of their use. This trial aimed to evaluate the composition of wine during industrial red wine fermentations using an automatic sequential air injection system (i.e., AirMixing MI^TM). Fourteen lots of Cabernet Sauvignon grapes were fermented using four air injection regimes, where the intensity and daily frequency of air injections were set to either low or high. As expected, the treatment combining high-intensity and high-frequency air injection produced the largest dissolved oxygen peaks reaching up to 1.9 mg L⁻¹ per cycle, compared to 0.1 mg L⁻¹ in the low-intensity and low-frequency treatment. Yet, in all cases, little to no accumulation of oxygen overtime was observed. Regarding phenolics, the highest intensity and frequency of air injections led to the fastest increase in total phenolics, anthocyanins, short polymeric pigments, and tannin concentration, although compositional differences among treatments equilibrate by the end of fermentation. The main differences in phenolic compounds observed during fermentation were mediated by temperature variation among wine tanks. Based on these findings, it is advisable to keep the characterizing kinetics of phenolic extraction and expand the study to the aroma evolution of wines fermented with this technology. Full article

Mycosis is caused by, among other factors, filamentous fungi, ubiquitous molds belonging to Aspergillus spp. which are often opportunistic pathogens. Over 100 species of Aspergillus have been described. The most common species responsible for diseases in humans and animals are Aspergillus fumigatus and Aspergillus niger, with Aspergillus flavus and Aspergillus clavatus being somewhat rarer. Aspergillus causes a range of diseases, from localized colonization and hypersensitivity reactions, through chronic necrotizing infections, to rapidly progressing angioinvasion and dissemination, leading to death. Testicular mycosis is extremely rarely described in both humans and animals. No studies in the literature report a simultaneous occurrence of testicular tumors and fungal infection of the organ, so the aim of this paper was to describe, for the first time, a case of two independent testicular tumors coexisting with testicular mycosis. A histopathological examination was performed on the left testicle of a male dog, specifically a mixed-breed dog resembling a husky weighing 22 kg and with an age of 8 years. Bilateral orchidectomy was performed for medical reasons due to the altered outline of the left testicle, leading to scrotal deformation. The dog did not show any clinical signs of illness, and the testicles were not painful. The right testicle, according to the operating veterinarian, showed no macroscopic changes, so histopathological verification was not performed. Microscopic imaging of the changes clearly indicated the coexistence of a tumor process involving Leydig cells (Leydigoma, interstitial cell tumor, ICT), Sertoli cells (Sertolioma), and fungal infection of the testis. The case suggests the possibility of the coexistence of tumor processes, which may have impaired local immune response of the tissue, with an infectious, in this case fungal, inflammatory process. Based on the literature, this paper is the first report on the occurrence of two independent histotype testicular tumors and their associated mycosis. Full article

Earthquakes can severely disrupt power distribution networks, causing extensive outages and disconnection from the transmission grid. This paper proposes a two-stage restoration method tailored for post-earthquake distribution systems. First, earthquake-induced damage is modeled using ground motion prediction equations (GMPEs) and fragility curves, and degraded network topologies are generated by Monte Carlo simulation. Then, a time-domain generator start-up model is developed as a mixed-integer linear program (MILP), incorporating cranking power and radial topology constraints. Further, a prioritized load recovery model is formulated as a mixed-integer second-order cone program (MISOCP), integrating power flow, voltage, and current constraints. Finally, case studies demonstrate the effectiveness and general applicability of the proposed method, confirming its capability to support resilient and adaptive distribution network restoration under various earthquake scenarios. Full article

Background: Gingival recession is a common condition involving apical displacement of the gingival margin, leading to root surface exposure and associated complications such as dentin hypersensitivity and root caries. Among the most effective treatment options are the tunneling technique (TUN) and the coronally advanced flap (CAF), both combined with connective tissue grafts (CTGs). This study aimed to evaluate and compare the clinical outcomes of TUN + CTG and CAF + CTG in terms of root coverage and keratinized tissue width (KTW) over a 6–12-month follow-up. Methods: A randomized, double-blind clinical trial was conducted following CONSORT guidelines (ClinicalTrials.gov ID: NCT06228534). Participants were randomly assigned to receive either TUN + CTG or CAF + CTG. Clinical parameters, including gingival recession depth (REC) and KTW, were assessed at baseline as well as 6 months and 12 months postoperatively using a calibrated periodontal probe. Statistical analysis was performed using descriptive statistics and linear mixed models to compare outcomes over time, with a significance level set at 5%. Results: Both techniques demonstrated significant clinical improvements. At 6 months, mean root coverage was 100% in CAF + CTG cases and 97% in TUN + CTG cases, while complete root coverage (REC = 0) was observed in 100% and 89% of cases, respectively. At 12 months, root coverage remained stable, at 99% in the CAF + CTG group and 97% in the TUN + CTG group. KTW increased in both groups, with higher values observed in the CAF + CTG group (3.53 mm vs. 3.11 mm in TUN + CTG at 12 months). No significant postoperative complications were reported. Conclusions: Both TUN + CTG and CAF + CTG are safe and effective techniques for treating RT1 and RT2 gingival recession, offering high percentages of root coverage and increased KTW. While CAF + CTG achieved slightly superior coverage and tissue gain, the TUN was associated with better aesthetic outcomes and faster recovery, making it a valuable alternative in clinical practice. Full article

This article utilises Max-Neef’s Human Scale Development (HSD) framework (1991) to answer two research questions: what impact does government and community-based social protection (SP) have on UK asylum-seeker wellbeing; how are interactions with all forms of SP, both as giver and receiver, supporting or harming the satisfaction of asylum-seekers’ fundamental human needs at this time? The research study utilised a mixed-methods, collaborative, case study design situated within a refugee and asylum-seeker (RAS) support charity in Southwest England. Methods included peer-led Qualitative Impact Protocol interviews, Photovoice, surveys, and staff interviews. Data were subjected to an inductive, bottom-up process on Causal Map software (version 2, Causal Map Ltd., 39 Apsley Rd., Bath BA1 3LP, UK) and the analysis used the HSD framework. We found eight over-arching themes. The four main needs-violators/destroyers of asylum-seeker wellbeing were dehumanisation, unfreedoms, enforced ignorance, and (re)traumatisation, and the four main needs-satisfiers were common humanity, autonomy and resistance, exerting agency through knowledge exchange, and healing. Five policy and practice-focused bridging satisfiers are recommended to help move individual and collective experience from a negative to a positive state in the research population. Policy and practice should be transparent and evidence-based, efficient and equitable, supportive of participation and productivity, trauma-informed, and multi-agency. Full article

This paper presents a qualitative case study on the design, implementation, and validation of the Art Nouveau Path, a mobile augmented reality game developed to foster sustainability competences through engagement with Aveiro’s Art Nouveau built heritage. Grounded in the GreenComp framework and developed through a Design-Based Research approach, the game integrates location-based interaction, narrative storytelling, and multimodal augmented reality and multimedia content to activate key competences such as systems thinking, futures literacy, and sustainability-oriented action. The game was validated with 33 in-service schoolteachers, both through a simulation-based training workshop and a curricular review of the game. A mixed-methods strategy was used, combining structured questionnaires, open-ended reflections, and curricular review. The findings revealed strong emotional and motivational engagement, interdisciplinary relevance, and alignment with formal education goals. Teachers emphasized the game’s capacity to connect local identity with global sustainability challenges through immersive and reflective experiences. Limitations pointed to the need for enhanced pedagogical scaffolding, clearer integration into STEAM subjects, and broader accessibility across technological contexts. This study demonstrates that these games, when grounded in competence-based frameworks and inclusive design, can meaningfully support multimodal, situated learning for sustainability and offer valuable contributions to pedagogical innovation in Education for Sustainable Development. Full article

The mixing of liquid–solid systems still poses a challenge in modern engineering. Numerical models often struggle to reliably describe the complex hydrodynamics in many aspects, such as the fundamental drag force model. In this article, an established experimental method is revisited. The method is newly modified through computer-aided image analysis for increased objectivity and repurposed for comparative experiments with numerical results to aid in model validation in practical engineering cases without the need for expensive equipment. The original method consists of measuring patterns forming in settled particles at impeller speeds below the just off-bottom suspension speed in a mixing tank with a flat transparent bottom. The use of mathematical p-norms to fully capture the emerging shapes is introduced here for the first time. Using this methodology, LES CFD results with different drag force models are quantitatively compared with the experimental findings. Full article