Search Results (662)

This study investigates the perceptions of economics students from Romania’s Central Region regarding the global phenomena of globalization, localization, and slowbalization (GLS), analyzed through the lens of environmental, economic, and educational sustainability. The research highlights a high level of awareness and understanding of globalization and localization, while the concept of slowbalization remains relatively unfamiliar and often perceived with uncertainty or neutrality. Most respondents view globalization as the most sustainable model for long-term economic development, emphasizing its contributions to international trade, market expansion, investment flows, and access to global education and research. At the same time, localization is recognized for its role in preserving cultural identity, strengthening local economies, and addressing pressing environmental issues through low-carbon solutions. Regarding educational sustainability, students support a hybrid model that balances global exposure with the appreciation of local knowledge and traditions—a glocal approach particularly endorsed by master’s students. The study also reveals statistically significant differences between undergraduate and graduate respondents, indicating more mature perspectives among those in advanced studies. The paper could help in course design and lesson engagement and concludes by recommending curricular reforms in economic education and proposing future interdisciplinary, comparative, and qualitative research to deepen understanding of GLS dynamics, particularly in the context of emerging global trends and technological transformations. Full article

The consistent quality control of ultrapure water (UPW) in semiconductor manufacturing depends on removing trace organonitrogen compounds such as urea. Due to its high solubility, chemical stability, and neutral polarity, urea is inadequately removed by conventional processes. Even at low concentrations, it elevates total organic carbon (TOC) and reduces electrical resistivity. The use of reclaimed water as a sustainable feed stream amplifies this challenge because its nitrogen content is variable and persistent. Conventional methods such as reverse osmosis, ultraviolet oxidation, and ion exchange remain limited in treating urea due to its uncharged, low-molecular-weight nature. This review examines the performance and limitations of these processes and explores electrochemical oxidation (EO) as an alternative. Advances in EO are analyzed with attention to degradation pathways, electrode design, reaction selectivity, and operational parameters. Integrated systems combining EO with membrane filtration, adsorption, or chemical oxidation are also reviewed. Although EO shows promise for selectively degrading urea, its application in UPW production is still in its early stages. Challenges such as low conductivity, byproduct formation, and energy efficiency must be addressed. The paper first discusses urea in reclaimed water and associated removal challenges, then examines both conventional and emerging treatment technologies. Subsequent sections delve into the mechanisms and optimization of EO, including electrode materials and operational parameters. The review concludes with a summary of main findings and a discussion of future research directions, aiming to provide a comprehensive foundation for validating EO as a viable technology for producing UPW from reclaimed water. Full article

The electrochemical reduction of CO₂ (eCO2RR) has emerged as a promising route for carbon-neutral fuel and chemical production, offering a sustainable alternative to fossil-based processes. This article begins with an overview of conventional CO₂ conversion methods, highlighting their limitations and the advantages of electrochemical approaches under ambient conditions. We focus on recent advancements in electrocatalyst development for the eCO2RR, including metal-based, Cu-based, and metal-free catalysts. Metal-based catalysts are categorized by product selectivity (formate, CO, and multicarbon products), emphasizing their structures and practical performance. Cu-based catalysts are discussed in detail due to their unique capability to produce multicarbon products, with emphasis on design strategies, material types, and performance trends. Additionally, we review emerging metal-free catalysts, including their synthesis, mechanisms, and potential applications. This article provides a comparative analysis to guide future research toward efficient, selective, and durable catalysts for CO₂ electroreduction, aiming to accelerate the deployment of carbon capture and utilization technologies. Full article

The Middle East and North Africa region has not played a major role in climate action so far, and several countries depend economically on fossil fuel exports. However, this is a region with vast solar energy resources, which can be exploited affordably for power generation and hydrogen production at scale to eventually reach carbon neutrality. In this paper, we elaborate on the case of the United Arab Emirates and explore the aspirations and feasibility of its net-zero by 2050 target. While we affirm the concept per se, we also highlight the technological complexity and economic dimensions that accompany such transformation. We expect the UAE’s electricity demand to triple between today and 2050, and the annual green hydrogen production is expected to reach 3.5 Mt, accounting for over 40% of the electricity consumption. Green hydrogen will provide power-to-fuel solutions for aviation, maritime transport and hard-to-abate industries. At the same time, electrification will intensify—most importantly in road transport and low-temperature heat demands. The UAE can meet its future electricity demands primarily with solar power, followed by natural gas power plants with carbon capture, utilization and storage, while the role of nuclear power in the long term is unclear at this stage. Full article

The development of innovative and environmentally sustainable construction materials is a strategic priority in the context of the ecological transition and circular economy. Geopolymers and alkali-activated materials, derived from industrial and construction waste rich in aluminosilicates, are gaining increasing attention as low-carbon alternatives to ordinary Portland cement (OPC), which remains one of the main contributors to anthropogenic CO₂ emissions and landfill-bound construction waste. This review provides a comprehensive analysis of geopolymer-based solutions for building and architectural applications, with a particular focus on modular multilayer panels. Key aspects, such as chemical formulation, mechanical and thermal performance, durability, technological compatibility, and architectural flexibility, are critically examined. The discussion integrates considerations of disassemblability, reusability, and end-of-life scenarios, adopting a life cycle perspective to assess the circular potential of geopolymer building systems. Advanced fabrication strategies, including 3D printing and fibre reinforcement, are evaluated for their contribution to performance enhancement and material customisation. In parallel, the use of parametric modelling and digital tools such as building information modelling (BIM) coupled with life cycle assessment (LCA) enables holistic performance monitoring and optimisation throughout the design and construction process. The review also explores the emerging application of artificial intelligence (AI) and machine learning for predictive mix design and material property forecasting, identifying key trends and limitations in current research. Representative quantitative indicators demonstrate the performance and environmental potential of geopolymer systems: compressive strengths typically range from 30 to 80 MPa, with thermal conductivity values as low as 0.08–0.18 W/m·K for insulating panels. Life cycle assessments report 40–60% reductions in CO₂ emissions compared with OPC-based systems, underscoring their contribution to climate-neutral construction. Although significant progress has been made, challenges remain in terms of long-term durability, standardisation, data availability, and regulatory acceptance. Future perspectives are outlined, emphasising the need for interdisciplinary collaboration, digital integration, and performance-based codes to support the full deployment of geopolymer technologies in sustainable building and architecture. Full article

As an important part of global carbon neutrality strategies, carbon dioxide (CO₂) capture, utilization, and storage technologies have emerged as critical solutions for reducing carbon emissions. However, conventional CO₂ applications, including food preservation, industrial synthesis, and enhanced oil recovery, face inherent limitations such as suboptimal gas–liquid mass transfer efficiency and inadequate long-term stability. Recent advancements in CO₂ micro-nanobubbles (CO₂ MNBs) have demonstrated remarkable potential across multidisciplinary domains, owing to their distinctive physicochemical characteristics encompassing elevated internal pressure, augmented specific surface area, exceptional stability, etc. In this review, we try to comprehensively explore the unique physicochemical properties of CO₂ MNBs and their emerging applications, including industrial, agricultural, environmental, and energy fields. Furthermore, we provide a prospective analysis of how these minuscule bubbles can emerge as pivotal in future technological innovations. We also offer novel insights and directions for research and applications across related fields. Finally, we engage in predicting their future development trends as a promising technological pathway for advancing carbon neutrality objectives. Full article

Global warming and rapid urban industrialization are profoundly transforming land-use patterns and carbon storage capacity in terrestrial ecosystems. A rigorous analysis of spatiotemporal variations in regional land-use changes and carbon storage dynamics provides critical insights for sustainable land-use planning and ecological security, particularly within the context of achieving carbon peaking and carbon neutrality targets. In this study, the PLUS-InVEST model was coupled with climate change and policy constraints to construct six future scenarios. We analyzed the characteristics of land-use evolution and the spatial and temporal changes in carbon storage in the Sanjiangyuan region from 2000 to 2020. We also predicted the potential impacts of land-use shift on carbon storage. The results show the following: (1) Land-use transitions exerted significant impacts on carbon stock. The Sanjiangyuan region experienced a net carbon stock reduction of 9.9 × 10⁶ t during 2000–2020, with the most pronounced decline (6.1 × 10⁶ t) occurring between 2000 and 2010. (2) Under the same climate scenario, the natural development (ND) scenario exhibited decreasing carbon reserves relative to 2020 baseline levels. Notably, land-use planning scenarios demonstrated spatially heterogeneous impacts, with the ecological protection (EP) scenario consistently maintaining higher carbon stocks compared to the ND scenario. (3) Multivariate driver interactions exerted stronger control over spatial carbon storage patterns than any individual factor. These findings inform targeted land-use management strategies to enhance regional carbon sequestration capacity, promote sustainable development, and support China’s carbon peaking and neutrality objectives. Full article

Biomass gasification represents a pivotal technology for sustainable energy and chemical production, yet its efficiency and product quality are critically dependent on catalyst performance. This comprehensive review systematically synthesizes recent advancements in catalyst design, mechanistic insights, and process integration in biomass gasification. Firstly, it details the development and performance of catalysts in diverse categories, including metal-based catalysts, Ca-based catalysts, natural mineral catalysts, composite/supported catalysts, and emerging waste-derived catalysts. Secondly, this review delves into the fundamental catalytic reaction mechanisms governing key processes such as tar cracking/reforming, water–gas shift, and methane reforming. It further explores sophisticated strategies for catalyst structure optimization, focusing on pore structure/surface area control, strong metal–support interactions (SMSIs), alloying effects, nanodispersion, and crystal phase design. The critical challenges of catalyst deactivation mechanisms and the corresponding activation, regeneration strategies, and post-regeneration performance evaluation are thoroughly discussed. Thirdly, this review addresses the crucial integration of zero CO₂ emission concepts, covering in situ CO₂ adsorption/conversion, carbon capture and storage (CCS) integration, catalytic CO₂ reduction/valorization, multi-energy system synergy, and environmental impact/life cycle analysis (LCA). By synthesizing cutting-edge research, this review identifies key knowledge gaps and outlines future research directions towards designing robust, cost-effective, and environmentally benign catalysts for next-generation, carbon-neutral biomass gasification systems. Full article

CO₂ geological storage (CGS) is critical for mitigating emissions in hard-to-abate industries under carbon neutrality. However, its implementation faces significant challenges. This paper examines CO₂-trapping mechanisms and proposes key safety measures: the continuous monitoring of in situ CO₂ migration and formation pressure dynamics to prevent remobilization, and pre-injection lithological analysis to assess mineral trapping potential. CO₂ injection alters reservoir stresses, inducing surface deformation; understanding long-term rock mechanics (creep, damage) is paramount. Thermomechanical effects from supercritical CO₂ injection pose risks to caprock integrity and fault reactivation, necessitating comprehensive, multi-scale, real-time monitoring for leakage detection. Geostatistical analysis of well log and seismic data enables realistic subsurface characterization, improving numerical model accuracy for risk assessment. This review synthesizes current CGS knowledge, analyzes technical challenges, and aims to inform future site selection, operations, and monitoring strategies. Full article

Under the framework of the “dual-carbon” goals of China (“carbon peak” by 2030 and “carbon neutrality” by 2060), the escalating complexity of emerging power systems presents significant challenges to safety governance. Traditional management models are now confronting bottlenecks, notably in knowledge inheritance breakdown and lagging risk prevention and control. This paper explores the application of large AI models in safety and emergency management in the power industry. Through core capabilities—such as natural language processing (NLP), knowledge reasoning, multimodal interaction, and auxiliary decision making—it achieves full-process optimization from data fusion to intelligent decision making. The study, anchored by 18 cases across five core scenarios, identifies three-dimensional challenges (including “soft”—dimension computing power, algorithm, and data bottlenecks; “hard”—dimension inspection equipment and wearable device constraints; and “risk”—dimension responsibility ambiguity, data bias accumulation, and model “hallucination” risks). It further outlines future directions for large-AI-model application innovation in power industry safety and management from a four-pronged outlook, covering technology, computing power, management, and macro-level perspectives. This work aims to provide theoretical and practical guidance for the industry’s shift from “passive response” to “intelligent proactive prevention”, leveraging quantified scenario-case analysis. Full article

Gotland has been designated by the Swedish government as a pilot region for the transition to a sustainable, fossil-free energy system by 2030. This transformation emphasizes local renewable energy production and system independence. Within this context, this study investigates the role of industrial waste heat as a resource to improve energy efficiency and support sector integration between electricity, heating, and industry. A mixed-methods approach was used, combining techno-economic energy system modeling, life cycle assessment, spatial GIS data, and stakeholder input. The study develops and analyzes future carbon-neutral energy scenarios for Gotland’s energy system. Industrial waste heat can significantly reduce primary energy demand, particularly in scenarios with expanded industry, carbon capture, and increased sector integration—such as through district heating. In such cases, up to 3000–4000 GWh/year of low-temperature industrial residual heat becomes available, offering substantial potential to improve overall energy efficiency. The scenarios highlight synergies and trade-offs across environmental, economic, and social dimensions, emphasizing the importance of coordinated planning. Scenarios with offshore wind enable energy exports and industrial growth but raise challenges related to emissions and public acceptance, while scenarios without cement production reduce environmental impact but weaken local economic resilience. Limitations of the study include the exclusion of global supply chain impacts and assumptions about future technological costs. The study underscores the need for integrated planning, regulatory innovation, and stakeholder collaboration to ensure a just and resilient transition for Gotland. Full article

China’s carbon peak and neutrality transition is critically constrained by the severe talent shortage and structural inefficiencies in higher education. This study systematically investigates the current status of “dual-carbon” talent cultivation and demand in China, leveraging annual “dual-carbon” talent cultivation data from universities nationwide. By applying the GM(1,1)-ARIMA hybrid forecasting model, it projects future national “dual-carbon” talent demand. Key findings reveal significant regional disparities in talent cultivation, with a pronounced mismatch between industrial demands and academic supply, particularly in interdisciplinary roles pivotal to decarbonization processes. Forecast results indicate an exponential growth in postgraduate talent demand, outpacing undergraduate demand, thereby underscoring the urgency of advancing high-end technological research and development. Through empirical analysis and innovative modeling, this study uncovers the structural contradictions between “dual-carbon” talent cultivation and market demands in China, providing critical decision-making insights to address the bottleneck of carbon-neutral talent development. Full article

This systematic review critically examines the benefits and challenges of high-compression-ratio (CR) implementation in hybrid-dedicated engines, recognizing CR increase as a pivotal strategy for enhancing the indicated thermal efficiency to achieve carbon peak and carbon neutrality goals. However, excessively high CRs face critical constraints, including intensified knock propensity, increased heat transfer (HTR) losses, reduced combustion stability, augmented dissociation losses, and cold-start misfire risks. The feasibility and necessity of CR enhancement in hybrid systems were comprehensively evaluated based on these factors, with fundamental mechanisms of the detrimental effects elucidated. To address these challenges, optimized countermeasures were synthesized: knock suppression via high-octane fuels, EGR technology, lean combustion, and in-cylinder water injection; heat transfer reduction through thermal barrier coatings and independent CR/expansion-ratio control; misfire risk monitoring using ion current or cylinder pressure sensors. These approaches provide viable pathways to overcome high-CR limitations and optimize engine performance. Nevertheless, current research remains confined to isolated solutions, warranting future focus on integrated optimization mechanisms investigating synergistic interactions of multiple strategies under high-CR conditions. Full article

This study develops an integrated environmental–economic assessment framework to evaluate the life cycle environmental impacts and economic costs of CO₂ geological storage and produced water treatment in saline formations in China. Using a case study of a saline aquifer carbon storage project in the Ordos Basin, eight full-chain carbon capture, utilization, and storage (CCUS) scenarios were analyzed. The results indicate that environmental and cost performance are primarily influenced by technology choices across carbon capture, transport, and storage stages. The scenario employing potassium carbonate-based capture, pipeline transport, and brine reinjection after a reverse osmosis treatment (S5) achieved the most balanced outcome. Breakeven analyses under three carbon price projection models revealed that carbon price trajectories critically affect project viability, with a steadily rising carbon price enabling earlier profitability. By decoupling CCUS from power systems and focusing on unit CO₂ removal, this study provides a transparent and transferable framework to support cross-sectoral deployment. The findings offer valuable insights for policymakers aiming to design effective CCUS support mechanisms under future carbon neutrality targets. Full article

This study proposes the SMR Smart Net-Zero City (SSNC) framework—a scalable model for achieving carbon neutrality by integrating Small Modular Reactors (SMRs), renewable energy sources, and sector coupling within a microgrid architecture. As deploying renewables alone would require economically and technically impractical energy storage systems, SMRs provide a reliable and flexible baseload power source. Sector coupling systems—such as hydrogen production and heat generation—enhance grid stability by absorbing surplus energy and supporting the decarbonization of non-electric sectors. The core contribution of this study lies in its real-time data emulation framework, which overcomes a critical limitation in the current energy landscape: the absence of operational data for future technologies such as SMRs and their coupled hydrogen production systems. As these technologies are still in the pre-commercial stage, direct physical integration and validation are not yet feasible. To address this, the researchers leveraged real-time data from an existing commercial microgrid, specifically focusing on the import of grid electricity during energy shortfalls and export during solar surpluses. These patterns were repurposed to simulate the real-time operational behavior of future SMRs (ProxySMR) and sector coupling loads. This physically grounded simulation approach enables high-fidelity approximation of unavailable technologies and introduces a novel methodology to characterize their dynamic response within operational contexts. A key element of the SSNC control logic is a day–night strategy: maximum SMR output and minimal hydrogen production at night, and minimal SMR output with maximum hydrogen production during the day—balancing supply and demand while maintaining high SMR utilization for economic efficiency. The SSNC testbed was validated through a seven-day continuous operation in Busan, demonstrating stable performance and approximately 75% SMR utilization, thereby supporting the feasibility of this proxy-based method. Importantly, to the best of our knowledge, this study represents the first publicly reported attempt to emulate the real-time dynamics of a net-zero city concept based on not-yet-commercial SMRs and sector coupling systems using live operational data. This simulation-based framework offers a forward-looking, data-driven pathway to inform the development and control of next-generation carbon-neutral energy systems. Full article