Search Results (16,112)

The rising demand for sustainable agriculture and circular resource management has intensified interest in converting wastewater sludge into value-added products. This review explores the transformation of sewage sludge into slow- and controlled-release fertilizers (CRFs), with a focus on biochar production and encapsulation technologies. Sewage sludge is rich in essential macronutrients (N, P, K), micronutrients, and organic matter, making it a promising feedstock for agricultural applications. However, its use is constrained by challenges including compositional variability, presence of heavy metals, pathogens, and emerging contaminants such as microplastics and PFAS (Per- and Polyfluoroalkyl Substances). The manuscript discusses a range of stabilization and conversion techniques, such as composting, anaerobic digestion, pyrolysis, hydrothermal carbonization, and nutrient recovery from incinerated sludge ash. Special emphasis is placed on coating and encapsulation technologies that regulate nutrient release, improve fertilizer efficiency, and reduce environmental losses. The role of natural, synthetic, and biodegradable polymers in enhancing release mechanisms is analyzed in the context of agricultural performance and soil health. While these technologies offer environmental and agronomic benefits, large-scale adoption is hindered by technical, economic, and regulatory barriers. The review highlights key challenges and outlines future perspectives, including the need for advanced coating materials, improved contaminant mitigation strategies, harmonized regulations, and field-scale validation of CRFs. Overall, the valorisation of sewage sludge into CRFs presents a viable strategy for nutrient recovery, waste minimization, and sustainable food production. With continued innovation and policy support, sludge-based fertilizers can become a critical component of the green transition in agriculture. Full article

The unimolecular alkene elimination reaction class of fatty acid alkyl esters (FAAEs) is a crucial component in the low-temperature combustion mechanism for biodiesel fuels. However, thermo-kinetic parameters for this reaction class are scarce, particularly for the large-size molecules over four carbon atoms and intricate branched-chain configurations. Thermo-kinetic parameters are essential for constructing a reaction mechanism, which can be used to clarify the chemical nature of combustion for biodiesel fuels. In this paper, the B3LYP method, in conjunction with the 6-311G(d,p) basis set, is used to carry out geometry optimization of the species participating in the reactions. Frequency calculations are further executed at the same level of theory. Additionally, coupled with the 6-311G(d,p) basis set, the B3LYP method acts as the low-level ab initio approach, while the Gaussian-4 (G4) composite method serves as the high-level ab initio approach within the isodesmic reaction correction scheme. The CCSD(T) approach is employed to verify the consistency of the electronic energy ascertained through the G4 method. The isodesmic reaction method (IRM) is used to obtain the energy barriers and reaction enthalpies for unimolecular alkene elimination reaction class of FAAEs. Based on the reaction class transition state theory (RC-TST), high-pressure-limit rate coefficients were computed, with asymmetric Eckart tunneling corrections applied across 500~2000 K temperature range. Rate rules at the high-pressure-limit are obtained through the averaging of rate coefficients from a representative collection of reactions, which incorporate substituent groups and carbon chains with different sizes and lengths. Ultimately, the energy barriers, reaction enthalpies, and rate rules at the high-pressure-limit and kinetic parameters expressed as (A, n, E) are supplied for developing the low-temperature combustion mechanism of biodiesel fuels. Full article

This paper investigated the tunnel slags generated from a specific tunnel project to systematically assess their environmental risk through phase composition, chemical composition, acidification potential, and heavy metal speciation. Leaching experiments were conducted under various influencing factors, including particle size, time, liquid-to-solid ratio, pH, temperature. The release concentration of heavy metals from the tunnel slag particles follows the following order: Zn > Cu > Cr. This is primarily attributed to the preferential release of Zn under acidic conditions due to its high acid-soluble state, while Cr, which is predominantly present in the residual state, exhibits very low mobility. Furthermore, decreased particle sizes, increased liquid-to-solid ratios, elevated leaching temperatures, extended leaching times, and lower pH values can effectively promote the dissolution of heavy metals from the tunnel slag. The cumulative leaching curves of Cr, Cu, and Zn from the three types of tunnel slags conform to the Elovich equation (R² > 0.88), indicating that the release process of heavy metals is primarily controlled by diffusion mechanisms. The S- and Fe/Mg-rich characteristics of D3 confers a high acidification risk, accompanied by a rapid and persistent heavy metal release rate. In contrast, D2, which is influenced by the neutralizing effect of carbonate dissolution, releases heavy metals at a steady rate, while D1, which is dominated by inert minerals like quartz and muscovite, exhibits the slowest release rate. It is recommended that waste management engineering prioritize controlling S- and Fe/Mg-rich tunnel slags (D3) and mitigating risks of elements like Zn and Cu under acidic conditions. This study provides a scientific basis and technical support for the environmentally safe disposal and resource utilization of tunnel slag. Full article

Structural applications that use High-Strength Low-Alloy (HSLA) steels require detailed microstructural analysis to manufacture welded components that combine strength and weldability. The balance of these properties depends on both the chemical composition and the welding parameters. Moreover, in multi-pass welds, thermal cycling results in a complex Heat-Affected Zone (HAZ), characterized by sub-regions with a multitude of microstructural constituents, including brittle phases. This study investigates the influence of Vanadium addition on the microstructure and performance of the HAZ. Multi-pass welded joints were manufactured on 15 mm thick S355 steels with different Vanadium contents using a robotic GMAW process. A steel variant containing both Vanadium and Niobium was also considered, and the results were compared to those of standard S355 steel. Moving through the different sub-regions of the welded joints, the results show a heterogeneous microstructure characterized by ferrite, bainite and martensite/austenite (M/A) islands. The presence of Vanadium reduces carbon solubility during the phase transformations involved in the welding process. This results in the formation of very fine (average size 11 ± 4 nm) and dispersed precipitates, as well as a lower percentage of the brittle M/A phase, in the variant with a high Vanadium content (0.1 wt.%), compared to the standard S355 steel. Despite the presence of the brittle phase, the micro-alloyed variants exhibit strengthening without loss of ductility. The combined presence of both hard and soft phases in the HAZ provides stress-damping behavior, which, together with the very fine precipitates, promises improved resistance to crack propagation under different loading conditions. Full article

The construction and maintenance of ecological corridors not only facilitate species migration and gene flow but also enhance ecosystem stability and resilience, providing critical support for achieving global carbon neutrality goals. Despite their importance, research on urban ecological corridors—specifically their role in carbon sequestration and emission reduction within urban environments—remains insufficiently explored. To address this gap, we employed bibliometric and network analysis methods, utilizing the CiteSpace6.3.1 visualization tool to systematically review existing literature from the Web of Science Core Collection database. This study examines the research progress and trends in urban ecological corridors from 2000 to 2023, focusing on their role and significance in the context of global carbon neutrality. The findings reveal the following: (1) Research attention has grown steadily from 2000 to 2023, with climate change, carbon emission dynamics, and biodiversity emerging as core themes, reflecting increasing global focus on the carbon neutrality functions of urban ecological corridors. (2) CiteSpace analysis identified key research hotspots through keywords including climate change, carbon cycle, ecosystem services, model simulation, and ecological network analysis, revealing the functional mechanisms and pathways of urban ecological corridors in carbon neutrality contexts. (3) Current scientific challenges focus on understanding three core aspects of urban ecological corridors, the compositional elements, spatial structural design, and functional capacity assessment, requiring systematic theoretical breakthroughs. (4) Future research should prioritize exploring mechanisms to enhance urban ecological corridor functions and constructing low-carbon urban ecological networks, providing theoretical guidance and practical pathways for achieving urban emission reduction and climate goals. This study contributes to integrating research on the effectiveness of urban ecological corridors and carbon sinks, offering theoretical insights and practical guidance for reducing urban emissions and achieving climate goals. Full article

The work is focused on the study of the influence of different types of inorganic fillers, in combination with modifiers, on the rheological, thermal, and mechanical properties of a biodegradable mixture based on PLA/PHB. Ten types of inorganic fillers based on talc, magnesium hydroxide, aluminum hydroxide, calcium carbonate, and silicon dioxide were used in the study, along with three types of modifiers. It was concluded that fillers containing reactive OH groups on their surface act as strong pro-degradants in PLA/PHB blends, and their degrading effect can be suppressed by the addition of reactive modifiers. Each modifier acts specifically with different types of fillers. Therefore, it is necessary to select a suitable filler/modifier combination not only for fillers with different chemical compositions but also for fillers with different morphologies within the same chemical type. Moreover, the preparation of PLA/PHB/magnesium hydroxide blends with suitable processing and application properties opens the possibility of developing environmentally friendly polymeric materials with a reduced flammability. The addition of talc, which has a platelet structure, can increase the barrier properties of the mixture. Full article

Unidirectional carbon fiber-reinforced polymer (UD-CFRP) composites demonstrate superior tensile creep strain and stress relaxation behavior along fiber orientation. However, prolonged transverse compressive loading in structural connection zones induces significant interfacial stress relaxation and creep deformation, primarily driven by resin matrix degradation and interfacial slippage under thermal-mechanical interactions, and remains poorly understood. This study systematically investigates the transverse stress relaxation characteristics of UD-CFRP through controlled experiments under varying thermal conditions (20–80 °C) and compressive stress levels (30–80% ultimate strength). Post-relaxation mechanical properties were quantitatively evaluated, followed by the development of a temperature-stress-time-dependent predictive model aligned with industry standards. The experimental results reveal bi-stage relaxation behavior under elevated temperatures and compressive stresses, characterized by a rapid primary phase and stabilized secondary phase progression. Notably, residual transverse compressive strength remained almost unchanged, while post-relaxation elastic modulus increased by around 10% compared to baseline specimens. Predictive modeling indicates that million-hour relaxation rates escalate with temperature elevation, reaching 51% at 60 °C/60% stress level—about 1.8 times higher than equivalent 20 °C conditions. These findings provide crucial design insights and predictive tools for ensuring the long-term integrity of CFRP-based structures subjected to transverse compression in various thermal environments. Full article

Exposure of individuals to electromagnetic fields in a wide area of daily life necessitated making spaces-structures healthier against electromagnetic fields. In this study, waste copper slag and carbon fibers were added to the cement mortar in different proportions with substitutes and additives. Physical, mechanical, electromagnetic shielding and microstructure studies were carried out on the produced composite mortars at different ages. It was determined that the mechanical strengths of composite mortars were superior to those of reference mortar samples. It was observed that electromagnetic shielding effectiveness was more positive with copper slag and especially carbon fiber additions. The highest electromagnetic shielding values were obtained in mortars containing 50% copper slag and 0.5% carbon fiber. Additionally, it was determined that copper slag, stored as an environmental waste, could be suitable for use in cementitious mortar systems. These composites offer promise for sustainable building designs in terms of both environmental performance and structural material stability. Full article

Wastewater treatment plants (WWTPs) function as engineered ecosystems in which microbial consortia mediate nutrient cycling, xenobiotic degradation, and heavy metal detoxification. This review discusses a forward-looking roadmap that integrates microbial ecology, multi-omics diagnostics, and artificial intelligence (AI) for next-generation treatments. Meta-analyses suggest that a globally conserved core microbiome indicates sludge functions, with high predictive value for treatment stability. Multi-omics approaches, including metagenomics, metatranscriptomics, and environmental DNA (eDNA) profiling, have integrated microbial composition with greenhouse gas (GHG) emissions, showing that WWTPs contribute 2–5% of anthropogenic nitrous oxide (N₂O) emissions. Emerging AI-enhanced eDNA models have achieved >90% predictive accuracy for effluent quality and antibiotic resistance gene (ARG) prevalence, facilitating near-real-time monitoring and adaptive control of effluent quality. Key advances include microbial strategies for degrading organic pollutants, pesticides, and heavy metals and monitoring industrial effluents. This review highlights both translational opportunities, including engineered microbial consortia, AI-driven digital twins and molecular indices, and persistent barriers, including ARG dissemination, resilience under environmental stress and regulatory integration. Future WWTPs are envisioned as adaptive, climate-conscious biorefineries that recover resources, mitigate ecological risks, and reduce their carbon footprint. Full article

The main objective of this work is to develop a cost-effective and durable ceramic membrane for water purification. The low-cost ceramic membrane was fabricated using readily available materials, such as clays, aluminum oxide, and calcium carbonate, The membrane was fabricated by uniaxial pressing at different pressures and sintering temperatures, then tested using a scanning electron microscope (SEM) and XRD. The porosity of the resulting membrane was 38.7%, and the contact angle was 65° indicating good hydrophilicity for filtration applications. The main composition was 70% clay, 25% CaCO₃, and 5% alumina. The removal % for methylene blue was tested at varying concentrations, achieving up to 99% removal, an initial flux of 496.8 L m⁻² h⁻¹, and an average pore size of 2 µm. Furthermore, the research explores the effect of backwashing cycles and techniques on the membrane long-term performance. The results indicated that washing the membrane for four cycles to cleanness has achieved an improved efficiency of the membrane and % dye rejection. Back washing was achieved using no chemicals; only distilled water and drying were used. A preliminary costs assessment of the production for affordable membrane resulted in a value of 170 USD/m². The findings demonstrate that optimizing backwashing cycles is essential for prolonging the membrane lifespan and lowering operation costs. Full article

Skarn-type iron ore is economically significant, and numerous skarn ore deposits have been identified in the North China Craton. The newly discovered orbicular diorite in this region is distinguished from other analogous rocks due to the accumulation of large magnetite particles, which may shed new light on the genesis of this ore type. The magnetite in different parts of the orbicular structure exhibits distinct compositional differences. For example, magnetite at the edge has a small particle size (200 μm) and is associated with the minerals plagioclase and hornblende, indicating that it crystallized from normal diorite magma. By contrast, magnetite in the core has a relatively large particle size (>1000 μm), is associated with apatite and actinolite, and contains apatite inclusions as well as numerous pores. The size of magnetite in the mantle falls between that of the edge and the core. The syngenetic minerals of magnetite in the mantle include epidote and plagioclase. The magnetites in the cores of orbicules have a higher content of Ti, Al, Ni, Cr, Sc, Zn, Co, Ga, and Nb than those in the rim. The δ⁵⁶Fe value of the core magnetite (0.46‰–0.78‰) is much higher than that of the mantle and rim magnetite in orbicules. Moreover, the δ⁵⁶Fe value of magnetite increases as the V content of magnetite gradually decreases. This large iron isotope fractionation is likely driven by liquid immiscibility that forms iron-rich melts under high oxygen fugacity. The reaction between magma and carbonate xenoliths (Ca, Mg)CO₃ during magma migration generates abundant CO₂, which significantly increases the oxygen fugacity of the magmatic system. Under the action of CO₂ and other volatile components, liquid immiscibility occurs in the magma chamber, and Fe-rich oxide melts are formed by the melting of carbonate xenoliths. Iron oxides (Fe₃O₄/Fe₂O₃₎ will crystallize close to the liquidus due to high oxygen fugacity. These characteristics of magnetite in the Tanling orbicular diorite (Wuan, China) indicate that diorite magma reacts with carbonate xenoliths to form “Fe-rich melts”, and skarn iron deposits are probably formed by the reaction of intermediate-basic magma with carbonate rocks that generate such “Fe-rich melts”. A possible reaction is as follows: diorite magma + carbonate → (magnetite-actinolite-apatite) + garnet + epidote + feldspar + hornblende + CO₂↑. Full article

The transition to a sustainable energy mix is essential to mitigate climate change. Enhanced Oil Recovery (EOR) using low-salinity water (smart water) has emerged as a promising strategy for reducing environmental impacts in the petroleum industry, producing a highly valuable energy source due to both its energy density and market value. This study critically reviews intermediate technological readiness levels (TRL), applying a patent-based approach (TRL 4–5) and a review of articles (TRL 3) to analyze various aspects of smart water for EOR, including its composition. A total of 23 patents from the European Patent Office (Questel Orbit) and 1395 articles from Elsevier’s Scopus database were analyzed, considering annual trends, country distribution, international collaborations, author and applicant affiliations, citation dependencies, and factorial analyses. Both patents and articles show exponential growth; however, international collaboration is more frequent in the scientific literature, while patents remain concentrated in a few countries aligned with their markets. Technologies are focused on wettability, surface complexation, CO₂ interactions, emulsification, aerogels, reinjection water treatment, carbonate reservoirs, effluent treatment, nanofluidics, and ASP fluids. Recent topics include CO₂ associations, permeability, fractured reservoirs, gels, reservoir water, wettability alteration, and reservoir/oil heterogeneity. The findings indicate the need for multivariated development of customized smart waters to address complex interfacial synergistic mechanisms. International Joint Industry Projects and global regulations on the safe use and composition of hybrid injections are recommended to accelerate development, reduce environmental impacts, and enhance the efficient use of existing fields, alleviating the challenges of finding new reservoirs. Full article

This work presents a comprehensive study on the synthesis and application of Al₂O₃ fibers derived from an ammonium aluminum carbonate hydroxide (AACH) precursor. Through a hydrothermal route, the influence of critical synthesis parameters, including aluminum nitrate and urea concentrations, reaction temperature and time, and stirring conditions, on fiber morphology and aspect ratio was systematically investigated. The as-synthesized AACH fibers were subsequently converted into thermodynamically stable α-alumina fibers via controlled annealing. These high-aspect ratio alumina fibers were incorporated into polydimethylsiloxane (PDMS) to produce electrically insulating, thermally conductive composites. The thermal performance of fiber-filled composites was benchmarked against that of particle-filled counterparts, with the former exhibiting significantly enhanced thermal conductivity. Furthermore, the dielectrophoretic alignment of alumina fibers led to an additional increase in thermal conductivity, underlining the importance of high-aspect ratio fillers. This study uniquely combines the controlled synthesis of alumina fibers with their incorporation and alignment in a polymer matrix, presenting a novel and effective approach for engineering anisotropic, thermally conductive, and electrically insulating composite materials. Dielectrophoretic alignment of α-Al₂O₃ fibers synthesized through optimized hydrothermal conditions and incorporated into PDMS composites deliver over 95 % higher thermal conductivity than spherical fillers. Full article

The smoke toxicity of epoxy resin limits the application of its carbon fiber composites in marine interior structures. To address this issue, a novel epoxy resin (EZ) was synthesized by grafting phenyl propyl polysiloxane (PPPS) onto ortho-cresol novolac epoxy resin (EOCN), building upon the group’s earlier work on polysiloxane-modified epoxy resin (EB). The results confirmed successful grafting of PPPS onto EOCN, which significantly enhanced the thermal stability and char residue of EZ. Specifically, the peak heat release rate (PHRR), total heat release (THR), peak smoke production rate (PSPR), and total smoke production (TSP) of EZ were reduced by 68.5%, 35%, 73.1%, and 48.3%, respectively, attributable to the formation of a stable and compact char layer that suppressed smoke generation. By blending EZ with EB resin, a low-smoke epoxy system (LJF-2) was developed for prepreg applications. Carbon fiber composites (LJF-CF) prepared from LJF-2 exhibited minimal smoke emission and a unique bilayer char structure: a dense inner layer that hindered smoke transport and a thick outer layer that provided thermal insulation, delaying further resin decomposition. Silicon was uniformly distributed in the char residue as silicon oxides, improving its stability and compactness. Without adding any flame retardants or smoke suppressants, LJF-CF achieved a maximum smoke density (Ds,max) of 276.9, meeting the requirements of the FTP Code for ship deck materials (Ds,max < 400). These findings indicate that LJF-CF holds great promise for use in marine interior components where low smoke toxicity is critical. Full article

Nickel oxide (NiO), a wide bandgap p-type semiconductor, has emerged as a promising material for electrochemical sensing owing to its excellent redox properties, chemical stability, and facile synthesis. Its strong electrocatalytic activity enables effective detection of diverse analytes, including glucose, hydrogen peroxide, environmental pollutants, and biomolecules. Advances in nanotechnology have enabled the development of NiO-based nanostructures such as nanoparticles, nanowires, and nanoflakes, which offer enhanced surface area and improved electron transfer. Integration with conductive materials like graphene, carbon nanotubes, and metal–organic frameworks (MOFs) further enhance sensor performance through synergistic effects. Innovations in synthesis techniques, including hydrothermal, sol–gel, and green approaches, have expanded the applicability of NiO in next-generation sensing platforms. This review summarizes recent progress in the structural engineering, composite formation, and electrochemical mechanisms of NiO-based materials for advanced electrochemical sensing applications. Full article