Search Results (226)

In the design of small-scale test models for hull structures, the directional dimensional analysis method is commonly employed. However, conventional dimensional analysis based on elasticity theory may be insufficient to capture the nonlinear behaviors of structural materials under dynamic loading, which restricts its applicability in ultimate strength tests for small-scale hull structure models. This paper presents a scaling method grounded in the theory of finite similitude. Based on the finite similitude theory, this paper deduces similarity scaling criteria applicable to the static and dynamic responses of box girders and designs a series of trial models of box girders. The scaling criteria are verified and analyzed through numerical tests conducted under static and dynamic loads. On the basis of the numerical test results of dynamic responses, the dynamic response similarity criteria considering the similarity relationship of material constitutive parameters are modified and verified. By applying the static response scaling criteria in this paper to select appropriate materials, the prediction deviation of the box girder trial models under static loads is less than 2%. With the modified dynamic response scaling criteria proposed in this paper, the prediction deviations of each trial model under dynamic loads are less than 2% and 7%. A comprehensive analysis of material parameters was conducted to examine their impact on the nonlinear similarities observed in the processes. To validate the ultimate strength and nonlinear response scaling criterion based on the finite similitude approach, numerical experiments were performed to assess the ultimate strength and dynamic buckling response characteristics of the box girder across various scaling ratios and material parameters. The analysis demonstrated that the ultimate strength scaling criterion and the nonlinear response scaling criterion derived from the finite similitude approach effectively captured material nonlinearity. The results from the small-scale model provided accurate predictions of the ultimate strength of the full-scale model. Full article

In order to improve the lubrication efficiency in the bearing cavity, this study establishes a simulation model of the fluid domain of the bearing cavity based on the computational fluid dynamics (CFD) method and systematically studies the flow characteristics of the lubricant and its lubrication mechanism in the high-speed rotary bearing. In the process of high-speed bearing operation, the lubricant is subject to the combined effect of centrifugal force and contact pressure, gradually spreads to both sides of the steel ball, and forms a stable oil film after injection from the nozzle. However, due to the influence of high pressure distribution in the contact area, the actual formation of the oil film coverage is relatively limited. In order to further optimize the lubrication effect, this study focuses on investigating the influence law of different injection speeds and rotational speeds on the bearing air curtain effect. The results of the study show that when the air curtain effect is enhanced, there will be significant shear interference on the trajectory of the lubricant, which is manifested in the phenomenon of “buckling” at the end of the lubricant, thus reducing the lubrication efficiency. To address this problem, this study innovatively proposes the air curtain obstruction coefficient K as a quantitative evaluation index, and through numerical simulation, it is found that the lubricant can effectively overcome the air curtain obstruction and achieve a better lubrication coverage when the value of K is reduced to below 0.4. Based on this finding, the study further confirmed that the lubrication efficiency of bearings can be significantly improved under different operating conditions by rationally regulating the injection rate. Full article

Cold-formed steel (CFS) channel beams are increasingly used as primary structural elements in modern construction due to their lightweight and high-strength characteristics. To accommodate building services, these members often feature perforations—typically circular and unstiffened—produced by punching. Recent studies indicate that adding edge stiffeners, particularly around circular web openings, can improve flexural strength. Extending this idea, attention has shifted to hexagonal web perforations; however, limited research exists on the bending performance of hexagonal cold-formed steel channel beams (HCFSBs). This study presents a detailed nonlinear finite element (FE) analysis to evaluate and compare the flexural behaviour of HCFSBs with unstiffened (HUH) and edge-stiffened (HEH) hexagonal openings. The FE models were validated against experimental results and expanded to include a comprehensive parametric study with 810 simulations. Results show that HEH beams achieve, on average, a 10% increase in moment capacity compared to HUH beams. However, when evaluated using current Direct Strength Method (DSM) provisions, moment capacities were underestimated by up to 47%, particularly in cases governed by lateral–torsional or distortional buckling. A reliability analysis confirmed that the proposed design equations yield accurate and dependable strength predictions. Full article

The accordion honeycomb has unique deformation characteristics in cellular materials. This study develops a three-dimensional equivalent Cauchy continuum model (3D-ECM) based on the variational asymptotic method (VAM) to efficiently predict the mechanical response of the accordion honeycomb. The accuracy of the 3D-ECM is validated via quasi-static compression experiments on 3D-printed specimens and detailed 3D finite element simulations (3D-FEM), showing a strong correlation between simulation and experimental data. Parametric analyses reveal that the re-entrant angle, ligament-to-strut length ratio, and thickness ratios significantly affect the equivalent elastic moduli, providing insights into geometric optimization strategies for targeted mechanical performance. Comparative experiments among honeycomb structures with positive, negative, and zero Poisson’s ratios show that the accordion honeycomb achieves superior dimensional stability and tunable stiffness but exhibits lower energy-absorption efficiency due to discontinuous buckling and recovery processes. Further comparison among different ZPR honeycombs confirms that the accordion design offers the highest equivalent modulus in the re-entrant direction. The findings underscore the accordion honeycomb’s promise in scenarios demanding structural reliability, tunable stiffness, and moderate energy absorption. Full article

Many kinds of panel structures are proposed in aircraft design. This study presents a topology optimization method to improve the buckling resistance of panel structures. It should be noted that a popular configuration of the present panel structure is that with ribs and frames. Stiffening characteristics (i.e., effects of increasing structural stiffness of a panel structure with ribs and frames) are thus included during analysis of panel structures. After studying the coupling relationship between the dynamic characteristics and buckling behavior of the panel, a developed MMC (moving morphable component) method is proposed for topology optimization to improve the buckling resistance of the panel. It is seen that the coupling relationship between the dynamic characteristics and buckling behavior of the panel is mainly reflected when the compression force acts on the panel, corresponding that dynamic characteristics will vary with the load. If the load acts on the structure, the first-order natural frequency of the panel with ribs and frames in this study decreases with the increase in the load, with the optimization objective of maximizing the first-order natural frequency. Based on the coupling relationship between dynamic characteristics and buckling behavior, the critical buckling load of the panel increases as the first-order natural frequency increases. The present optimization method can reduce computational complexity without changing the accuracy of the calculation. At the same time, the coupling relationship between dynamic characteristics and buckling behavior is applied in topology optimization, which is of great significance to improve the comprehensive performance of panel structures in the engineering design process. This paper improves the dynamic characteristics and buckling resistance of panels with ribs and frames based on the improved MMC method. The proposed method effectively meets the design requirements of flight vehicle design in complex environments. Full article

This paper develops a novel design formula to estimate the residual strength of corroded stiffened cylindrical structures. It extends a previously established ultimate strength formulation for intact cylinders by introducing a corrosion-induced strength reduction factor. The foundational formula considers failure mode interactions like yielding, local buckling, overall buckling, and stiffener tripping. This research utilizes recent experimental and numerical investigations on corroded ring-stiffened cylinder models. Experimental results validate the numerical analysis method, showing good agreement in collapse pressures (2–4% difference) and shapes. The validated numerical method is then subject to an extensive parametric study, systematically varying corrosion characteristics. Results indicate a clear relationship between corrosion volume and strength reduction, with overall buckling being more sensitive. Based on these comprehensive results, a new empirical strength reduction factor (${\rho }_c$) is derived as a function of the corrosion volume ratio ($V_{non}$). This factor is integrated into the existing ultimate strength formula, allowing direct residual strength estimation for corroded structures. The proposed formula is rigorously verified against experimental and numerical data, showing excellent agreement (mean 1.00, COV 5.86%). This research provides a practical, accurate design tool for assessing the integrity and service life of corroded stiffened cylindrical structures. Full article

Light-gauge steel frame (LGSF) materials are inherently susceptible to stochastic imperfections arising from their design, manufacturing, and erection. These defects can compromise operational integrity and adversely impact structural stability, especially during the construction period. Consequently, a thorough investigation into the buckling characteristics of LGSF materials with such imperfections is imperative. Conventional stochastic probabilistic methods, such as Monte Carlo simulations, often fail to fully capture intrinsic material and complex structural properties, leading to discrepancies between computational predictions and actual behavior. To address these limitations, this study introduces an innovative model using the Criteria Importance Through Intercriteria Correlation (CRITIC) method to assess LGSF materials under combined defects scenarios. The CRITIC method systematically evaluates various buckling modes in LGSFs under combined defects to identify the most detrimental modal combination, representing the most unfavorable scenario. Rigorous finite element analysis is then performed on the LGSF model based on this critical scenario. Compared to conventional approaches, the proposed CRITIC-based combined defects analysis model predicts a 0%~5% reduction in the critical load factor and a 1%~3% increase in ultimate displacement at control nodes. These findings indicate that the CRITIC-based method yields a more critical combination of buckling modes, thereby enhancing the reliability and safety of the simulation results. Furthermore, this research demonstrates that, for LGSF materials, the common assumption that the first-order buckling mode is inherently the most deleterious failure pattern is inaccurate. Full article

Polyethylene storage tanks are widely used for storing water and chemicals due to their lightweight and corrosion-resistant properties. Despite these advantages, their structural performance under seismic conditions remains a concern, mainly because of their low mechanical strength and weak bonding characteristics. In this study, a method of external strengthening using fiber-reinforced polymer (FRP) laminates is proposed and explored. The research involves a combination of laboratory testing on carbon fiber-reinforced polymer (CFRP)-strengthened polyethylene strips and finite element simulations aimed at assessing bond strength, anchorage length, and structural behavior. Results from tensile tests indicate that slippage tends to occur unless the anchorage length exceeds approximately 450 mm. To evaluate surface preparation, grayscale image analysis was used, showing that mechanical sanding increased intensity variation by over 127%, pointing to better bonding potential. Simulation results show that unreinforced tanks under seismic loads display stress levels beyond their elastic limit, along with signs of elephant foot buckling—common in thin-walled cylindrical structures. Applying CFRPs in a full-wrap setup notably reduced these effects. This approach offers a viable alternative to full tank replacement, especially in regions where cost, access, or operational constraints make replacement impractical. The applicability is particularly valuable in seismically active and densely populated areas, where rapid, non-invasive retrofitting is essential. Based on the experimental findings, a simple formula is proposed to estimate the anchorage length required for effective crack repair. Overall, the study demonstrates that CFRP retrofitting, paired with proper surface treatment, can significantly enhance the seismic performance of polyethylene tanks while avoiding costly and disruptive replacement strategies. Full article

This study delves into the delamination-driven nonlinear buckling characteristics of metal–composite cylindrical shells with different interfacial strengths. Although surface treatments are known to affect bonding performance, their specific influences on the delamination buckling behavior of metal–composite cylindrical shells remain underexplored. Accordingly, sandblasting and polishing processes were employed to the fabrication of single-lap shear specimens. The topography of the treated surface was then characterized through scanning electron microscopy, optical profilometry, and contact angle measurements. For topography characterization and performance tests, sandblasted and polished metal–composite cylindrical shells were fabricated for hydrostatic tests. A cohesive zone model was used to analyze the influences of interfacial strength on the nonlinear buckling characteristics of metal–composite cylindrical shells, and the modeling results were validated by benchmarking them with experimental results. Subsequently, a detailed parametric study was conducted to investigate the effects of cohesive zone parameters and geometric imperfection on the load-bearing capacity of the shells. The new findings reveal that among the fabricated steel specimens, the specimens subjected to 80-mesh sandblasting exhibited the highest bond strength in single-lap shear tests, with the bond strength being 2.56 times higher than that of polished specimens. Moreover, sandblasted metal–composite cylindrical shells exhibited a 55.0% higher average collapse load than that of polished metal–composite cylindrical shells. Full article

The disc-buckle scaffold system demonstrates significant advantages in prefabricated construction applications, particularly in terms of installation efficiency, load-bearing capacity, and standardization. Guangzhou Construction Group Co., Ltd., a leading enterprise in promoting prefabricated building development in Guangdong Province, China, has collaborated with the Guangdong University of Technology to develop an innovative disc-buckle scaffold system. The main difference between different scaffolds lies in the connection part of the joint. The mechanical behavior of scaffold joint plays a critical role in determining the structural integrity of the entire scaffolding system. So, the novel disc-buckle scaffold proposed in this paper is mainly new in the joint. Finite element simulation based on the test results is employed to study the performance of the novel scaffold joint in this paper. The results show that the newly developed scaffold joint exhibits superior mechanical performance, characterized by a bending stiffness of 34.5 kN·m/rad. The joint demonstrates maximum tensile and compressive bearing capacities of approximately 108 kN and 70 kN in the transverse direction, respectively. Furthermore, the joint’s maximum shear bearing capacity exceeds 180 kN, surpassing the buckling critical force of the vertical steel pipe and satisfying all strength requirements. The scaffold joint exhibits robust hysteresis characteristics, and the wedge-shaped connection mechanism maintains consistent stiffness and load-bearing symmetry under both positive and negative bending moments. The proposed disc-buckle steel scaffold joint features a minimal number of components, achieving an optimal balance between structural performance and economic efficiency. Full article

The current lack of standardized calculation methods for disc-buckle-type steel pipe supports, coupled with unsafe calculation length coefficients, has resulted in frequent safety incidents leading to severe casualties and economic losses. In this paper, the semi-rigidity characteristics of joints were investigated through the field bending test of disc-buckle steel pipe supports. Through analysis of the bending moment–rotation curves obtained from these tests, accurate initial bending stiffness values and a calculation model for semi-rigid joints were established. Numerical simulation and analytical correction method were employed to determine the effective length correction coefficient ${\mathsf{\mu }}_0$ under various erection parameters while accounting for joint semi-rigidity. The findings indicate that the slenderness ratio derived by the revised effective length coefficient is 8.13% greater than the standard value, primarily because current standards fail to adequately consider the constraint effect of the crossbar. The correction coefficient proposed in this paper provides a theoretical foundation for the safe construction of disc-type steel pipe supports, and holds significant value for engineering applications. Full article

Localized diaphragm (transversal plate) deformation and buckling were identified at the arc notch region during structural inspections of an operational steel bridge. To evaluate the potential structural consequences, alterations in the fatigue performance and stress characteristics induced by this deformation were systematically investigated through in situ monitoring combined with numerical simulation. It was demonstrated that the global load-transfer mechanism of the orthotropic steel deck (OSD) system remained minimally compromised. While within the localized deformation zone, the stress magnitudes at the diaphragm-to-U-rib (DU) welds were observed to be significantly amplified, and the stress concentration zones were found to be relocated to geometrically depressed regions. Based on the deformation-stage mechanical responses, the strategic employment of residual compressive stress generated through controlled hammer peening was proposed for counteracting stress escalation at DU welds recently caused by diaphragm buckling, whereas steel plate reinforcement strategies were recommended for mitigating progressive deformation development. Full article

The double crystal monochromator (DCM) is a spectrometer in synchrotron radiation beamlines, and its stability directly impacts the quality of the emitted light. In order to meet the requirements of the fourth generation of synchrotron light sources, researchers have designed a DCM using an active control method to ensure stability by actively compensating for crystal displacement through voice coil motors. The active control method imposes high demands on the vibration isolation performance of the DCM frame. In response to external excitation characteristics, this paper proposes a quasi-zero stiffness (QZS) isolation system based on a compressed buckling beam structure. Random vibration simulations using finite element analysis revealed that, under different operating conditions, the 3σ displacement of the core part of the DCM is maintained at the nanometer level. Moreover, this paper presents a calculation method based on elastic potential energy to establish force equilibrium equations for negative stiffness and analyzes stress distribution in the beam during vibration using the derived deflection curve. Validation through finite element simulations confirms the method’s accuracy in calculating negative stiffness and stress distribution. Because of the structural similarities, some of the results of this paper can be applied to the study of negative stiffness honeycomb materials. Full article

This study investigates the buckling performance of built-up cold-formed steel (CFS) columns, with a focus on how different thermal exposures and cooling strategies influence their susceptibility to various failure mechanisms. Addressing the gap in the literature on the fire behavior of mild steel (MS)-based CFS columns, the research aims to provide new insights. Compression tests were conducted on MS-based CFS column specimens after they were exposed to fire, to assess their post-fire buckling strength. The columns were subjected to controlled fire conditions following standardized protocols and then allowed to cool to room temperature. The study examined axial load-bearing capacity and deformation characteristics under elevated temperatures. To improve fire resistance, protective coatings—gypsum, perlite, and vermiculite—were applied to certain specimens before testing, and their performance was compared to that of uncoated specimens. A comprehensive finite element analysis (FEA) was also performed to model the structural response under different thermal and cooling scenarios, providing a detailed comparison of the coating effectiveness, which was validated against experimental results. The findings revealed significant variations in axial strength and failure mechanisms based on the type of fire-resistant coating used, as well as the heating and cooling durations. Among the coated specimens, those treated with perlite showed the best performance. For example, the air-cooled perlite-coated column (MBC2AC) retained a load capacity of 277.9 kN after 60 min of heating, a reduction of only 6.0% compared to the unheated reference section (MBREF). This performance was superior to that of the gypsum-coated (MBC1AC) and vermiculite-coated (MBC3AC) specimens, which showed reductions of 3.6% and 7.9% more, respectively. These results highlight the potential of perlite coatings to enhance the fire resistance of CFS columns, offering valuable insights for structural fire design. Full article

The frequency and buckling characteristics of functional gradient (FG) beams with asymmetric material distribution in the temperature field are analyzed in this paper. Generally, the asymmetrical material distribution of FG beams results in a non-zero neutral axis and non-zero thermal moment. However, some previous studies adopted the treatment of homogeneous beams in which the neutral axis and thermal moment were set as zero. To this end, a comprehensive FG beam model with thermal effect is developed based on the absolute nodal coordinate formulation, in which Euler–Bernoulli beam theory, Lagrangian strain, exact curvature, thermally induced strain, and neutral axis position are considered. For the convenience of comparisons, the presented model can be simplified into three models which do not consider the neutral axis or thermal moment. The numerical results indicate that the influence of the neutral axis on the thermal axial force is minimal while that on the thermal moment is significant. In the case of the high temperature difference, frequency, critical temperature difference, unstable state, and the buckling type of the FG beams are misjudged when the neutral axis or thermal moment is ignored. Full article